How to hide wires on the wall

How to hide wires on the wall - make properly hidden electrical wiring in an apartment with your own hands

How to make hidden wiring?

All the nuances of installing electrical wiring in an apartment are best decided at the planning or renovation stage. It would be wisest to anticipate all the problems that may arise during the electrical installation process.

Electrical installation in an apartment is most often carried out in a hidden way, but due to certain circumstances it is not possible to use this method.

For example, when all the repairs have already been completed, and the design plans have been implemented, and you notice that the wire on the wall from the air conditioner or from the switch does not look very good and spoils the decor of the space.

In this case, you should take the advice of experienced craftsmen or designers, for whom the problem of hiding wiring in an apartment is not a problem at all.

How to make hidden wiring during repairs?

Often, in order to save money, people install hidden electrical wiring diagonally in their apartment. However, such placement of wires is strictly prohibited, because the path of hidden wiring must be horizontal-vertical. This will help to avoid electrical damage in the future, as well as minimize the occurrence of other situations that are dangerous to the life and health of the apartment owner.

The distance between the wires and the ceiling must be at least 15 cm . First of all, you need to draw up the necessary wiring diagram. Wiring markings can be done in two main ways:

After creating the markings, it is important to choose the appropriate tool for making the grooves. Such tools can be a wall chaser, a grinder or a hammer drill. The grinder and the hammer drill are often used, since they are significantly inferior to the wall chaser in price.

You can attach the wires to a concrete or brick wall with your own hands using special dowel clamps. They go in very easily, but are extremely difficult to take out, since the clamps are securely fastened due to their “antennae”.

After laying the cable into the wall, the groove should be coated with a primer and sealed with a special plaster mixture. You can do all this yourself, spending a minimum amount of time, money and effort.

How to properly disguise wiring in an apartment? Advice from the experts

Masters use all types of camouflage in their work. This:

• internal camouflage
• external camouflage

Internal camouflage has its own characteristics, which can always be foreseen. If wall wires are in your way, they spoil the overall decor, and keeping them outside is also not very safe - you need to hide them inside, and you will have to resort to the following actions:

• In the place where the wires hang, carefully make cuts in the wallpaper
• raise these cuts as much as possible and secure them so that they do not interfere
• make small passages in the wall, like a groove
• lay all the wires into these channels, if possible secure them there inside with special plastic inserts, if any
• After laying the wires, you can cover them with plaster, or any other available means, such as plasticine
• After everything is dry, carefully glue the wallpaper back again

Of course, if you don’t want to greatly spoil the appearance of the wallpaper on the wall, you can lay the wire in a cable channel or use various design tricks.

Floor wiring

If you are bothered by wires that are located on the wall closer to the floor, you can hide them there too. You can use the following options:

• you need to use special skirting boards that have a hole for the wire. The central block of such a plinth is usually removable, a cord is laid inside, and then closed again
• you can hide the wiring in the floor by punching holes in it with a hammer drill, and then, putting the wiring in corrugation, lay it in the hole made and fill it with cement on top or cover it with parquet
• If your floor will be leveled before repairs, all wiring should be prepared in advance - thread them into protective corrugated pipes, lay them on the floor, and then screed the floor. If any wires still remain at the top, in order to avoid unnecessary actions, you can resort to the first option

Ceiling wiring

It is easier to hide wires on the ceiling than on the floor or wall. You can use the following ideas:

• if the interior design includes plasterboard decor, all wiring can be hidden in this niche. This will also help you perform further lighting actions and easily add or remove additional lighting fixtures
• a suspended ceiling provides plenty of room for action; all wiring can be easily hidden under it in any location
• also, if the interior has ceiling moldings, a very effective way is to hide the wires behind them

Any resident can create skillfully hidden electrical wiring in an apartment. Wires can become a full-fledged element of room decor.

Submit your application now!

And get the best offers from trusted craftsmen and teams.

1. Compare prices and choose the best conditions
2. Feedback only from interested specialists
3. Don't waste time communicating with intermediaries

Submit a request More than 10,000 performers
are waiting for your orders!

Source: https://remont.youdo.com/articles/electric/kak-sdelat-skrituyu-provodku/

5 best ways to hide wires from your TV - expert advice

It is important to understand that TV is not only a screen. A huge number of different devices are connected to the TV device: speakers, subwoofer, laptop, receiver, etc. Add to this the power cord and antenna cable. It is not surprising that all users have a question: how to hide the wires from the TV on the wall, in the floor, or decorate them?

Now let's look at 5 main ways to disguise all cords. Let's determine where it is better to hide the wires. Let us give real examples with photographs that confirm that it is indeed possible to hide all communications.

into the wall

Hiding the cables is not difficult. Especially considering the fact that masking various communications is a real trend in the world of interior design. Very often you have to run the antenna cable across the entire apartment. This violates the aesthetic picture. Therefore, new ideas on how to hide wires from the TV will be more useful than ever.

Remember that the antenna cable is not the only wire that connects to the TV device. Keep in mind that you also need to disguise the power cord. Many owners of modern equipment connect an Ethernet cable to a LAN connector. Add to this an HDMI cable, which is used to connect additional devices.

To solve this problem, use floor skirting boards with cable channels. They allow you to hide the wires. What to do if the TV is hanging on the wall? You will have to pull the cables out of the baseboard to connect them to the TV. It is clear that such a solution can hardly be called optimal. Therefore, it is wiser to hide communications in the wall.

What is the easiest way out of this situation? Twist the wires into a bundle using nylon ties. Try to disguise the cords somehow. This method absolutely cannot be called ideal, but it has the right to life.

A fundamental, but very labor-intensive solution is laying wires in grooves. Special holes need to be made during repairs. Don't forget to install a TV outlet on the wall. This is the most accurate and technologically advanced way. None of the guests will accidentally touch the wires. Also, the cords will be kept out of reach of pets. All wires are output to a single console, which contains the necessary connectors.

To route wires along grooves, it is absolutely not necessary to chisel the entire wall. Stretch them all the way to the baseboard, and then hide them in it. The main disadvantage of this method is that it is suitable only for those owners of TV equipment who are renovating their house or apartment.

How to hide wires in the wall under the TV if you have just recently finished finishing? The optimal solution is to decorate the cords, but we’ll talk about that a little later. Now let’s analyze how to hide communications for a TV on the wall.

First, think carefully about where exactly the TV will be located. Mark the location of the device on the wall. The second stage is the choice of bracket. This aspect is of enormous importance. Despite the global VESA standard, which includes the most popular mounting points, the brackets themselves come in different shapes and sizes.

Think carefully about the best type of bracket to choose. If the mount is too massive, it will interfere with commutation. An incorrectly selected bracket size will cause wires to fall out from behind the TV screen.

To make accurate measurements, you must first buy a TV. When the device is at your home, measure the dimensions, and then buy a special bracket. Try on the TV mount, measure the distance that remains to the edges - at this distance you need to make sockets.

The measurements taken need to be transferred to the wall, and then you can start working. Using a grinder, cut 2 vertical strips in the wall. Their depth should be literally a few centimeters. The distance between the stripes is no more than three centimeters.

Using a hammer drill, the inner part is hollowed out. This allows you to form full-fledged grooves. Make several holes using diamond bits. Sockets will be placed in them. All necessary outputs should be located here: power supply, antenna cable. Consider how many power points you will need. This depends on the number of equipment connected to the TV.

This completes the most difficult work. Place all the cords in the grooves made. All wires are first secured with plastic staples. If this is not done, then they will constantly fall out, interfering with subsequent wall finishing.

The ends of the wires must be connected according to the appropriate diagram with the socket. Then it needs to be installed in a specially designated place. The grooves should be sealed with gypsum plaster. The last stage is finishing. Install the bracket and fix the TV on it. Connect all wires to the TV.

The second way is to hide the cords under the floor. Today in construction stores you can easily buy special skirting boards equipped with a niche for masking the cable. You just need to remove the outer panel, and then remove the wires into this space. Then install the panel back.

The main advantage of this option is efficiency, cleanliness, and simplicity. Work takes up minimal free time. To cover the cords under the baseboard, you don't have to hammer anything. No dirt, etc. Antenna and Internet cables can be placed under the baseboard. With their help, other communications are also masked.

The antenna cable of the TV can also be hidden on the floor, or rather under it. How can I do that? Take a hammer drill, and then make holes in the floor, which will actually be intended for the wires. Use corrugation to create a protective layer, and then you can lay the cords.

When installation is complete, level the floor using a mixture of sand and cement. If the apartment has a wooden floor, then you will need to dismantle the boards and place the wires in a metal tube.

In cable channel

A special box also allows you to hide the wires. However, this is a less aesthetic option. The user can make a cable channel independently or buy a ready-made one in a store. Hiding wiring in a box is much easier and faster than making special holes in the floor.

Having carefully studied the assortment of special stores, we come to the conclusion that users are offered several types of cable channels. The simplest option is PVC boxes. Absolutely everyone saw them. This is an ordinary cable channel made of plastic. Most often they are found white. The removable cover is held in place by latches.

Is it possible to fit a PVC box harmoniously into the interior? This is possible, but only on condition that the color of the cable channel matches the palette of the room's interior. It is important that it does not blend into the interior, but at the same time does not look too catchy.

Perhaps the rarest option is models made from MDF. Such boxes will harmoniously fit into a classic interior, which contains wooden furniture and various interior items.

Metal cable channels are made primarily of aluminum. This product looks really very impressive. The box will fit harmoniously into a futuristic interior.

In structure, all the models listed above are very similar. They are fixed to the wall using special dowels or glue. The connections along with the cords are hidden under a decorative cover.

Sometimes it is much easier to make a cable channel yourself than to look for a suitable option in stores. The quality of the product and its appearance directly depend on your skills and abilities. The type of material used is also important. Working with PVC is much easier than working with metals.

Do you want something original and non-standard? You can make a cable channel from planed boards. The wires will be located between them. The wires will be covered with a decorative cover on top. As for the boards, they can also be painted in any color. Which will make them not stand out from the overall picture of the interior.

Under furniture

Mostly we hide the wires behind the TV. It is clear that if you look closely, all the cords will be visible. However, today you can buy special furniture that allows you to hide all communications.

To a greater extent we are talking about TV stands. They are equipped with special holes in which wires can be placed. It is very comfortable. Not to mention the fact that the cables will not be visible and therefore will not disrupt the interior design. Special headsets, which have an area intended for installing a TV, also allow you to hide the wires.

Perhaps the easiest way is to decorate the wires beautifully. You can hide the cords behind live or artificial plants, original driftwood, and curtains. To disguise wires, it is not necessary to make them invisible. Communications can be turned into a decorative element.

To decorate the cables, you need to take into account the style of the interior. Let's consider the most popular trends in design, as well as specific recommendations from professionals:

• Loft - use special channels presented in the form of a layout of small bricks;
• Classic interior - use additional wooden panels to disguise wires;
• Hi-tech – you can hide the cords in metal pipes; secure them to the wall with screws.

To achieve an impressive result, entrust this work to professionals. Not everyone has the appropriate skills. Specialists with experience in carrying out such work will be able to do everything efficiently and quickly.

If creative thinking is developed at the proper level, then you can do the decorating yourself. There is absolutely no need to buy additional expensive materials. The means at hand will be more than enough. The chosen method must match the decor.

For example, if the length of the wires allows, then you can make a drawing or a geometric figure from them on the wall. The main thing is that your composition fits harmoniously into the design of the room. First you need to make a sketch of the future drawing with a simple pencil. Once the pattern is applied to the surface, you can decorate the wall with cables.

The method of fixing the wires is another very important point that needs to be considered in advance. For example, nails are absolutely not suitable for us, since they will damage the cord. It is better to choose tape or glue. This method of decoration is a very simple disguise of cables.

What to do if patterns and all kinds of ornaments do not fit into the interior or the wires are too short? Use additional edging to turn an ordinary cord into a decorative element. This method is especially relevant when it comes to children's rooms. You can use all kinds of stickers to hide cables and maintain the integrity of the interior.

If you do not have the desire or free time for the manipulations described above, then you can simply close the wires. Use ikebana and all sorts of other decorative compositions: hemp, stones. The main thing is that they match the character of the room’s design.

Many people place wires near nearby lamps. You can decorate the composition with decorative thread or a garland. When performing such exquisite work, remember that the integrity of the cord sheath must not be compromised under any circumstances. Any damage will cause emergency situations.

Source: https://ProSmartTV.ru/tehnologii/spryatat-provoda-ot-televizora.html

20 Best Ideas for Disguising Wires, Batteries and Sockets

Protruding wires, open sockets and bulky batteries inevitably spoil the whole picture of the interior, making it ugly and uncomfortable. It's time to end this once and for all! Eliminate all imperfections in the apartment by bringing our ideas to life.

Wire as a decorative item

Make the wire that gets tangled under your feet a part of your interior, turning it into an original piece of decor. To do this, simply wrap the wire with ribbons or thick rope. The main thing is that the color of the “wrapper” matches the interior palette.

wall art

It's not so easy to get rid of the TV wire! But we have a way out - give room to your imagination and make the hated wire the basis of a work of art. By decorating the wall with drawings and photographs, you will not only hide the wire, but also add zest to the interior.

Peekaboo

Even the most stylish workspace can look untidy with dozens of wires snaking under your feet. To solve the problem once and for all, cover the protruding wires with a panel or curtains.

Cunning disguise

The wire from the table lamp still tries to get under your feet! Fortunately, it is easy to hide behind the table leg by attaching it with clips.

Wire panel

And a long wire can become an effective wall panel. Give it the desired shape and secure with clamps. Cities, animals and even abstract designs can come to life on your walls.

Wire fence

Another original way to hide a long wire is to cover it with a decorative “fence”. Attach it to the baseboard and forget about stray wires forever!

Behind the screen

Like a conspicuous wire, a battery can easily ruin the appearance and style of the interior, which is especially noticeable, for example, in Khrushchev-era buildings. Cover the battery with a screen - problem solved! In addition, the battery can be used as an unusual bookshelf.

One color

There is also a more budget option for masking the battery. Just paint it to match the tone of the walls: by adopting the shade of the walls, the battery will not become a hindrance, but a beautiful continuation of the interior.

Out of sight!

As a rule, open sockets inevitably spoil the appearance of the interior. To avoid this, buy special socket covers that will hide unsightly holes from your eyes.

Safety first

Open sockets are harmful not only to the interior, but also to your children. Protect your kids by covering the holes with a special “plaster”. Now you can sleep peacefully!

Practical case

Do sockets that are too high endanger the life of your phone? Use your imagination and sew a practical cover from old trousers. You can also make a case from an empty shampoo package - now your gadget cannot fall.

Surprise box

Perhaps everyone is familiar with the situation with gadgets running out of charge at the most inopportune moment. To prevent this from happening again, place all chargers in a desk drawer and store all gadgets there.

In one place

The tangle of wires upset a dozen nerves! To no longer get angry over trifles, sign all cords and chargers. For convenience, you can allocate them a separate box.

Storage wisely

Don't throw away the rolls of used toilet paper, because they are so convenient for storing wires and cables. No more confusion: label the bushings and you won't have to spend hours searching for the right wire.

Book with a secret

And the bulky router can easily fit into an old book cover that has long since lost its pages of text. Book lovers will be delighted!

A pet

Numerous sockets in the most inappropriate places can be decorated with stickers - this is a simple but creative solution that your children will definitely love!

In the house

A fairytale mini-door, behind which the socket will hide, is an excellent reason to do some handmade work. By the way, the necessary condition for the implementation of this idea is not golden hands, but rather the desire to do something with them.  

Art object

Perhaps the easiest way to disguise unnecessary objects on your wall is to hide them under a picture. One movement of your hand - and you can easily reach the switch, and the rest of the time you will enjoy the picturesque canvas.

In its place

A bulky gray printer can ruin even the most elegant interior - designate a drawer for it in your chest of drawers! And nothing else will question your impeccable taste.

New role

Live life playfully: turn an ordinary wire from headphones or a laptop into an electric one: decorative towers will help you.

Source: https://www.inmyroom.ru/posts/10164-s-glaz-doloy-15-luchshikh-idey-maskirovki-provodov-batarey-i-rozetok

How to hide TV wires on the wall: 3 ways to solve the problem

You can shout as much as you like that television destroys the brain, but this will not decrease the number of television receivers in modern houses and apartments. Moreover, televisions have recently become increasingly larger, the pictures are incredibly beautiful and are most often used for watching movies and TV series with the whole family.

But sometimes the quality of the output image significantly correlates with the overall level of installation of the device. We are talking about the wires that invariably accompany any TV placed on the wall.

We offer you 3 ways to solve the problem of how to beautifully and cleverly hide the wires from the TV on the wall without making much effort - and, of course, numerous photos with the final solutions will help you understand the details of the arrangement.

Wire decoration

If we briefly describe the essence of this method, it will roughly boil down to the following: “Why hide something if you can organically fit the wires from the TV into the interior?” .

In this, of course, one can see the line of least resistance, but if in the end everything looks very beautiful and cozy, then why not admit that such a solution to the problem has a right to life?

Let's try to describe several options for elegant and natural decoration of TV wires:

1. silicone nozzles - you can choose a wide variety of shades; there are shaped elements that add a significant amount of originality and extraordinary imagination to the design;
2. figured twisting - you can achieve an impressive effect if you simply fold the wires from the TV into any geometric figure or any arbitrary shape that meets your aesthetic needs;
3. plant branches - one of the simplest, but invariably true ways, lies in the fact that branches of various green plants are placed under the TV panel, as a result, the focus of attention from the wires shifts to attractive-looking greenery, or decorate the wires with voluminous paper flowers that you can do it yourself;
4. decorative panels - wood, plastic, and even metal can be used as a material, the shape is arbitrary, and the dimensions should be just such as to safely cover all the wires coming from the TV (see examples of 3D panels for walls).

All that we have listed above are so-called tips for the “lazy”. Or simply for resourceful people who know how to save their energy. However, sometimes it is not possible to hide the wires from the TV in the same way as in the photo above. We have to resort to more severe measures.

Hiding wires in the wall

The most uncompromising way. It will certainly appeal to those men for whom wall strobing is one of the most exciting activities. However, first things first. The order of your actions directly depends on what basis you have to deal with.

If the wall is made of concrete

Ideally, of course, think through such things in advance, even at the stage of major repairs.

In this case, you won’t have to tinker with the wall again, deforming the previously leveled surface. However, an ideal is only meant to exist in our thoughts. Therefore, let’s put our doubts aside, and take a hammer drill or a good old grinder in our hands and start making a groove in the wall.

1. make holes along the wire line;
2. remove excess fragments with a puncher, freeing up space for the future “stash”;
3. successfully place all the wires along the created groove;
4. insert the cable into the desired hole on the TV, check how correctly the wire is tensioned;
5. lay the created groove with plaster, it can be purchased at any hardware store;
6. finishing is at your discretion.

Of course, this is an option that is made for many years - so if you are going to soon change the layout of your apartment or house, you should use much more compromise solutions.
You will learn how to properly tap walls for wiring from the article at the link. Let's look at the photo to see how you can successfully hide the wires in this way.

If the wall is made of plasterboard

This option is much simpler, but will also require the use of auxiliary tools. In particular, a hammer drill. Make two holes:

• right behind the TV;
• at the bottom of the wall, at the junction with the baseboard.

The first hole will be needed in order to actually hide the wires behind the plasterboard sheet, and the second - for convenient connection to the network. We draw your attention to the fact that in this case it is best to install special skirting boards in the room with a recess for the cable - this way you can safely stretch the wire without any fear of damaging it.

Hiding the wires in a box

If, after all, ditching a wall is too radical a way for you to solve the problem of wires getting tangled and interfering with comfortable viewing, then this option can confidently be called a compromise. First, let’s talk about all the advantages of using it.

• extremely simple installation;
• magnificent aesthetic appearance;
• compliance with all fire safety standards.

Let's touch on the cons:

• the cost of purchasing a decorative box or cable duct;
• the need to make holes in the wall.

In order to disguise the wires from the TV on the wall, you can use either a cable channel or a full-fledged decorative box . The photo below demonstrates the difference between these two elements.

The basic material from which the box can be made is:

However, combined options using two of these materials are also often found.

What will be the procedure?

1. calculate the required amount of material, taking into account the direction of the wires and the size of the room;
2. fix the box on the wall, make the necessary cuts in corners and transitions;
3. keep in mind that the wire should lie freely in the box, so select the appropriate channel for it in diameter;
4. After installation is complete, you can repaint the cable channel or box in accordance with your preferences or interior design logic.

The whole process is on video

You can do without painting, and simply select in advance a box of a suitable color design with the wall. Fortunately, the choice in construction stores is now more than wide and can satisfy even the most extravagant requests.

A selection of photos with interesting solutions

Especially for those who like to spy on unusual ideas and later integrate them into their interior - our selection of photos. Perhaps this will help you find the most original and successful answer to the question of how to hide the wires from the TV on the wall.

Several videos with useful tips

Pay attention to a number of useful recommendations voiced by experienced professionals. It is quite possible that some of them will help you avoid common mistakes among beginners.

Conclusion

Source: https://stenaprofi.ru/23-kak-spryatat-provoda-ot-televizora-na-stene-3-sposoba-resheniya-problemy-s-51-foto-i-3-video.html

How to hide wires in an apartment: methods, tips, decorating ideas

Sometimes, when purchasing new equipment or after repairs, the wires in the apartment remain lying on the floor or hanging on the wall. They seriously spoil the appearance of a home, and can also cause a person or electronics to fall. You need to clarify in advance how to hide the wires so as not to spoil the design and make the house safe.

When a major renovation begins in an apartment or house, the wiring is most often recessed into the walls. First, using a wall chaser, drill, or hammer drill, grooves are made in the wall, into which the cables are then hidden. Wiring in a wooden house must be placed in a protective corrugation - a shell that will protect them from adverse effects and prevent damage.

Communications remain open during cosmetic renovations of the home or when installing new sockets and switches. If you wish, you can always correct the situation without extra costs. There are several methods to hide wires with your own hands.

On the walls

It happens that the wallpaper is already pasted, and you don’t want to violate its integrity. There is an option to eliminate protruding cables without causing serious damage:

• carefully cut the wallpaper or bend it away from the wall close to the floor;
• take a convenient construction tool and make a neat shallow channel in the wall;
• lay the wires in the resulting hole;
• close the channel with a thin layer of plaster or putty;
• let the solution dry;
• glue the wallpaper in its place.

If this method is not suitable, you can proceed without gating - use a decorative box for wires. It is especially common to cover power wires with boxes: they have a large diameter, so they cannot be recessed into the wall without repeated repairs. It is necessary to buy a cable channel that is suitable in color, width, and length, which will serve as an additional decorative element and reliably protect the wiring.

In a wooden house, the box will enhance fire safety measures. This option is also ideal for the bathroom, because it is very difficult to lay wires under the tiles. It is only important to remember that all lighting elements, electrical wiring, and cable ducts must be waterproof.

How else to beautifully hide wiring on the walls? If desired, it can be covered with the following finishing elements:

• door frames;
• various moldings, baguettes;
• window slopes.

It should be noted that only low-current wires (for example, for the Internet, telephone) can be covered with such materials, and high-voltage cables can only be hidden in accordance with fire safety standards.

On the floor

Wiring is often routed along the floor, and here it is even easier to hide it than on the wall. During repairs when laying the screed, you can stretch the cables in corrugation and fill them with cement on top - the communications will be reliable and durable. If there is already a floor covering, it is easy to carefully remove it, punch out recesses with a hammer drill, then push the wires into them and cement them. Under wooden floors, you will have to lay the cables in a metal pipe, after removing the boards.

The stores offer a wide range of floor skirting boards with a hole for wires (with a cable channel). The central part of such a plinth is removed, the cables are laid in the niche, and then the removable element is returned to its place. Working with such skirting boards is convenient, quick, there is no dust, dirt, and the floor material does not deteriorate.

The procedure for laying wires under the most popular coating - laminate - is as follows:

• remove part of the lamellas under which the cable will pass, right down to the construction logs (bars);
• place the cables in the corrugated pipe along or across the joists, if necessary, cutting out space in the wood for the crossing of the wires;
• return the soundproofing pads and lamellas to their original place.

On the ceiling

It is also possible to hide wiring on the ceiling, but the method will depend on the type of coating. In homes and offices, suspended ceilings are often used, which take up excess space, but give the opportunity to route wires as needed by users. There are practically no obstacles for the cables, so it is possible to route them along the shortest path. This has a number of advantages:

• cost reduction;
• reduction of work time;
• reducing the overall circuit resistance;
• strengthening fire safety;
• possibility of easy wiring replacement.

According to fire safety rules, wires and their bundles must be covered with corrugated pipes. The same applies to wiring under suspended ceilings, niches or complex plasterboard structures. It is best to connect communications into a single highway, which will facilitate repairs in the future. If the ceiling is concrete, you will have to drill grooves in it and lay wires in the same way as is done on the walls. This method is very labor-intensive and is rarely practiced.

External camouflage

If they have an artistic taste, many people prefer to decorate rather than hide the wires. From standard wiring it is quite possible to make a real art object, painting, panel with your own hands. Typically, cables come in black or white, but if desired, you can find a material of a brighter shade.

Next, you should choose a drawing that suits the style of the interior, sketch it with a non-greasy pencil directly on the wall. Afterwards, you need to measure the length of the circuit using a thread in order to purchase the missing amount of cable (part of it will only serve a decorative role).

You can make any wall pattern out of wires. Often the following are taken as a basis:

• branch with leaves, sitting birds;
• one or more trees;
• giant light bulb;
• power station;
• highway (in the nursery);
• decorative fence.

The wires are attached to the wall with special fasteners, which can then be decorated with any suitable material - fabric, special paper, designer decorations. Also, unsightly protruding wires are hidden behind tall indoor plants, well-placed furniture, carpeting, door frames, and windows.

Hiding wires from TV and computer

Usually the TV is placed in plain sight, so the long cable from the equipment will also be visible to everyone. Most often, during repairs, they immediately determine a place for the TV, installing sockets behind it, and leading the wire out of the wall. It is recommended to carefully peel off the wallpaper, make a groove for the wiring, place it in the hole, drowning it in the corrugation. The wires are fastened using brackets.

There are almost always a lot of cables near the computer desk, because printers, modems, routers and other devices are connected to the system unit. To hide the “tangle”, you can do the following:

• attach the wires to the inner surface of the table with self-tapping screws, reliable tape, and staples;
• beautifully decorate a shoe box, a plastic box, cut holes and release wiring;
• sew a fabric cover, attach it to the table top or to the back of the furniture from the inside;
• connect the cables with office clips to the furniture;
• hide the wiring in a single “hose” that will prevent confusion.

Useful tips

In order not to get confused when masking the wires and not to get into trouble during repairs, they must be marked in advance. This will help you immediately find the right cable later. It is better to separate low-power wiring from power wiring, without connecting it into a single bundle. Wires from the antenna and the Internet should be placed separately from others so as not to spoil the signal quality.

Cables should have the shortest possible length and the minimum number of connections: this increases their safety and reduces the risk of injury. It happens that the braid of hidden cables frays due to poor placement, so in dangerous places the wiring must be checked more often. If you need to mask wiring, you can use any ideas, especially since the range of tools and materials for decoration is now huge!

How to hide wires in an apartment: methods, tips, decorating ideas

Source: https://220.guru/electroprovodka/provoda-kabeli/kak-spryatat-provodku.html

All options that will help decoratively hide wiring in the house: how to hide wires without gating?

This article describes popular ways to hide wires in an apartment. Options for decorating and camouflaging them are offered.

Ideas for hiding wires

It is difficult to imagine modern life without electricity.

In any apartment there is a huge number of wires, and not only electrical wiring, but also cords from various devices, of which there can also be a dozen.

But there are ways to hide wiring in an apartment. It is enough to have available materials at hand and show imagination and ingenuity.

Why hide the wiring?

The reasons why you need to hide wires can be different. Cables hanging from the ceiling or lying down disrupt the aesthetic appearance and spoil the interior of the apartment. They are also removed for safety reasons. If there are pets or small children in the apartment, they will damage the wiring. The contacts are exposed, and this is dangerous, as it is easy to get an electric shock.

Popular options for hiding wiring in an apartment

You can hide wires and cables from view using improvised means that are found in almost every apartment. Stores also sell special devices and solutions to this problem.

In decorative boxes

There are special decorative skirting boards that differ in their special design and performance characteristics. they have a cable channel in which the cords are located. The materials from which skirting boards are made can be different:

1. plastic - located at the base of the floor, there are special separating cells on the profile rail, thanks to which several types of wires are laid.
2. the tree is quite rare. As a rule, wooden boxes are made to order. their insulation class must be appropriate to avoid fire during use.
3. aluminum is most preferred. It is highly resistant to fire and accommodates a large number of powerful wires.

hide the junction box

According to the rules, the junction box cannot be hidden under finishing materials. access to it must always be free for maintenance and repair. therefore, the white lid can be painted to match the color of the walls or covered with wallpaper. so that the plug does not stand out from the overall interior, it is also painted with automotive enamel to match the tone of sockets and switches.

where to hide under the floor or near the baseboard

Wires lying around on the floor can be hidden under the floor. but this is done during repairs, because lifting floorboards or covering elements separately is a labor-intensive process.

many prefer the finish in its original form.

Wiring is often hidden in a special panel; it is mounted on the wall along the baseboard and is not noticeable.

In addition, it can be decorated or painted.

if masking occurs during repairs, then a hole is made in the floor using a hammer drill, then the wire is inserted into the corrugation and laid in the hole made. after which the floor is filled with cement.

how to remove wires from TV, tuner

in many cases the TV is mounted on the wall. A decorative box will help hide trailing wires from a TV or tuner. Construction stores offer a wide range of different models of cable channels that will match the color and design of any interior.

if the TV is located on a stand or table, then you can nail the cords with a construction stapler to the legs or back wall of the piece of furniture. It is better to install the outlet behind the TV, or vice versa. as a last resort, cut a groove in the wall behind the TV and run electrical wiring along it. then lay the groove with plaster and finish it.

where to put the wires on the floor

cords lying on the floor are not only unsightly, but also unsafe. Boxes are convenient for hiding extension cords to which many devices are connected. for example, under the desktop, where a desktop computer and its peripherals are located. A regular shoe box will do for this. You need to make several holes in it for the wires and place an extension cord there. If desired, the box can be decorated with decorative elements or covered with paper.

For these purposes, there are already ready-made solutions - boxes made of durable plastic, the bottom of which is rubberized for stability on the floor. On the top cover there are holes for cords, and inside there are fasteners, and a long wire is wound around them. it can be placed on the floor or mounted on the wall.

unusual options for decorating wires

In order to hide wiring from view, it is not necessary to break walls and ceilings, buy panels or decorative boxes.

If you use your imagination, the cords can be beautifully placed on the wall.

For example, here are a few original solutions.

How to decorate on the wall from an antenna or tuner

If you approach camouflage creatively, wires can become an unusual decorative element. They are able to enliven the atmosphere or interior as a whole. To do this, it is enough to purchase special clamps, which are made in various forms. For example, construct something like a tree branch from a cord using leaf-shaped clips.

If the wall is bare and the wire is long enough, then make a drawing on the wall. Draw a car, a cityscape, a road or a fence. Special stickers for the wall will dilute the design and give it completeness.

How to close on the wall

You can cover the wiring using various decorative elements for the wall: photo wallpaper, paintings. A bookshelf with a cord behind it will look original and beautiful. Using design techniques it is possible to decorate a wall in an original way:

1. The loft style will be complemented by cable channels, which are designed in the form of bricks.
2. The classic interior involves wood finishing. Panels and additional elements made of wood will not be superfluous.
3. In a high-tech room, wires in the form of pipes secured with nails or screws would look appropriate.

How to hide a junction box on the wall

Since there must be free access to the junction box, it cannot be completely closed. But there are original solutions that will make it a decorative element:

• hang a decorative plate, poster or small picture on the lid;
• replace the standard box with a decorative one, which can be bought at any electrical store;
• decorate the cover with stickers designed to decorate sockets and switches.

How to hide wires on the wall beautifully from hanging light bulbs

Spot lighting in apartments is now popular, but hanging light bulbs have long cords that spoil the appearance of the room.

They are masked using special panels, which are sold in any hardware stores. They come in different colors and shapes, so it's easy to choose the right style.

If the wire is long, then using special fasteners, they create original patterns on the ceiling or wall. Decorated with additional accessories and stickers.

When does it make sense to groove cells on a wall or ceiling?

Grilling a wall or ceiling will be needed in the following cases:

1. To lay long cords and cables stretching across the entire apartment, which are not possible to beat.
2. If there are too many electrical devices in the apartment.
3. For security. Children and pets can reach cords, even those hidden behind panels and stickers.
4. Categorical denial of the presence of wiring elements in the interior.

A modern apartment consists of many communications, where electrical wiring occupies one of the first places. It connects not only light sources, but also all equipment and digital devices.

The abundance of cords creates a not very pleasant appearance, and if there are children in the apartment, then it also poses a danger. To avoid troubles, when planning a repair, you should think about how to hide the wires. In addition to internal camouflage, external camouflage is often used. The modern market offers a wide selection of various elements and accessories for these purposes.

Source: https://elektrika.expert/provodka/kak-sprjatat-provodku-v-kvartire.html

How to hide wires and extension cords: 6 clever ways

Agree, wires, cables and extension cords are the most annoying things in the house.

They create a feeling of clutter, make cleaning difficult and sometimes even pose a threat to our safety because they are so easy to trip over! Ideally, the problem of wires should be solved at the renovation stage: you need to wall up everything that is possible in the walls and cable channels, and also carefully plan the placement of sockets. But if it’s too late to ditch the walls, it doesn’t matter, because there are at least 6 ways to hide the wires. Be sure to try them and you will see how your home will be transformed.

Solution 1. Hiding the extension cord in a decorative box

An unsightly extension cord with a bunch of wires can be hidden in a box with holes cut out on the sides and a lid. It's cheap, simple and practical. There is only one downside - homemade cutouts may not look very neat.

Tip: You can use wicker baskets instead of boxes.

Solution 2. Hide the wires in a special box

Unlike decorative boxes, special boxes for extension cords and cables look neat from all sides, so they can be placed next to the computer, TV, on the desktop or on the bedside table.

Clue:

• Finding boxes is not a problem. For example, Ikea sells two models - the standard type and the one in the form of a bag. Cable organizers for wires can also be purchased at Ozon, as well as in hardware stores.

Solution 3. Fix the wires with clips

To organize the chaos of wires lying on the floor or table, secure them to the wall or furniture frame with special clamps.

You can secure the wires using a furniture stapler.

Tips:

• Cable clamps are sold at hardware and hardware stores;
• To avoid confusion, all wires should be marked with homemade labels as in the photo below.

• It is better to use inconspicuous transparent clips, for example, from Command, as in the photo below.

Solution 4. Collect cables in a holder under the table

If you collect all the wires under the table, they will not be visible, and the table will be in complete order.

You can buy this cable holder at Ikea.

Solution 5. Cover the cables with a plastic box

This solution is especially relevant for masking wires near the TV.

Hint: Ideally, the box should be painted to match the color of the wall.

Solution 6. Hiding the extension cord behind the furniture

This can be done using adhesive hooks or good double-sided tape.

Source: https://kitchendecorium.ru/posts/kak-spryatat-provoda-i-udliniteli.html

How to hide TV wires on the wall: the best design ideas

A safe, but time-consuming and expensive way to cover the cord is to hide it inside the wall. Hidden wiring does not interfere with the attractive appearance of the repair; it looks aesthetically pleasing and complete.

If the partition is made of concrete at the installation site, you cannot do without gating. This is a difficult, dusty solution that is suitable only for those who have started a major renovation and, at the rough finishing stage, remembered the desire to hang the TV on the wall and hide the cord from it.

• To do this, you need to clearly draw a diagram of where the wires will go, their beginning and the exit of the route.
• The groove in the wall is placed strictly diagonally or vertically to the nearest outlet or junction box.
• If electrical cables have already been installed in the wall, before starting work, equip yourself with equipment to identify hidden wiring.

Everything is much simpler if you need to place the TV on a plasterboard wall. Then mark the distance from the bracket to the nearest outlet, and stretch the wire into the wall cavity behind the building material.

Hide a cable channel or decorative box in a cable

Using a product like this is a simple and inexpensive method to hide the wiring from the TV. You can find plastic, metal and combination types on the market. This way to hide wiring is not only stylish, but also safe. The boxes comply with fire regulations.

The main thing is to choose the right size of the material, taking into account all the cables that need to be placed in it, and also calculate the length to the outlet. This material is produced in pieces 2 m long, which must be connected with special elements (connectors, plugs, tees, corners in different directions when turning, etc.). The color of the box is selected in accordance with the wall cladding.

Decorative boxes can turn cable networks from your TV into a piece of themed wall decor.

• Lined with brick, they are suitable for decorating a room in a modern style.
• For loft, products in the form of pipes of small diameter are used.
• Those who prefer eco-style should take a closer look at wood-look options.

In addition, such an element can be easily painted to match the color of the wallpaper or decorated with wooden boards that imitate the texture and shade of wall cladding.

Hide in furniture

Under the TV you can place a hinged panel with a built-in wiring compartment and a lockable door. A banquette under the screen would look good. But the most common way to hide the cord coming from the TV is to place practical furniture under it: a cabinet or pencil case. It is enough to place it in the TV area and all the wiring will be located behind cabinets or shelves on the wall.

Please note that if you need to lay part of the wire and hide it horizontally, along the wall and close to the floor, use a plinth - it comes with a special niche. To carry out the work, you only need to remove the top cover of the plinth and then fasten it back. Manipulations are carried out without additional tools, debris and dust.

Photo of TV wire decor

A good idea on how to decorate, hide and decorate an electrical cable is to use silicone stickers. They are inexpensive and can fit into almost any design. By using your imagination you can create a composition of weaving flowers, sitting birds, etc.

Original options for decorating wires

Sometimes designers use a non-standard technique when it is better not to disguise the cords from the TV, but to leave them in the most visible place and at the same time benefit from the situation. If the length allows, they form graphic patterns on the wall and assemble whole compositions that harmoniously fit into the overall theme of the renovation. The wires can be “dressed” in multi-colored casings if the interior requires it. Before attaching the cables, you must first draw a sketch with a pencil on the wall.

You can decorate hanging wires from the TV using a garland. For example, string large beads onto thin wires.

Living room

Here it is recommended to lay the wire to the TV and speakers in the baseboard, behind the furniture and even under the carpet. Below the plasma, a decorative fireplace or cabinet looks great, behind which you can hide the wiring.

Bedroom

In the relaxation room, you can decorate with flowers, fabric, or hide the TV panel with wires in a closet. The antenna can be included in a composition with bows and ribbons, and the wire can be hidden behind a mirror or picture.

Kitchen

Here the electrical wire will be well hidden behind the kitchen unit or in a niche.

Photo gallery

Today, many people install their TV on the wall. At the same time, the problem arises of how to hide the wires going to the outlet. One of the most reliable and aesthetic methods is wall chipping or laying cords under drywall. However, this method is only suitable for those who are doing repairs. In addition, you can decorate the wires with a decorative box, hide them in a special channel, or use various available materials in the form of fabric, stickers, flowers, etc.

Source: https://design-homes.ru/idei-dlya-doma/kak-spryatat-provoda-ot-televizora-na-stene

How to hide wires in an apartment

It is completely unsightly when, after renovation of a room, the wires are not hidden in the wall, but lie randomly on the floor or hanging on the wall. They not only spoil the overall picture of the room, but can also lead to an accident. In some cases, you have to think about how to connect some kind of device without spoiling the design of the room. Of course, it is worth paying attention to how to hide wires in an apartment.

Every home has one or another household appliance connected, and in any case, the wires on the wall from these appliances can be conspicuous in one way or another. This article will give detailed instructions on how to hide wires on the wall, in the wall and in the floor.

Wire on the wall

Mounted on the wall

If you have artistic taste, you can fix the wire on the wall and make a picture out of it. It is quite clear that a native, one and a half meter wire will not be enough for these purposes. Choose a suitable design and transfer its outlines to the wall, making a light-colored drawing with a simple pencil.

Now you need to calculate the required amount of wire. To do this, you can attach a nylon thread to the wall so that it repeats the pattern. Then its distance can be measured.

Don’t forget to add the length from the drawing to the outlet and to the source of electricity consumption - add a meter in reserve and you will get the required amount.

Wire manufacturers most often do not offer an abundance of wire colors, so you have to choose from what is available - black or white. If these colors do not suit you, then you can buy an extension cord, which can be pink or red. Don’t rush to rely on your opinion - try attaching a strip of colored fabric to the wall and you will immediately see whether the chosen color is suitable and will harmonize with the overall decor.

Decorated wire is not noticeable

If you decide to do everything simply but tastefully, then you can attach the decor to the wire or come up with your own, something original.

Alternative Methods

Wires covered with cloth

You can find a different approach - to mask the wires rather than hide them, and existing elements of the room will help in this, for example, door frames, baseboards, ceiling moldings, as well as heating risers.

With the right approach to work, the laying of wires can be made almost invisible, which will have a beneficial effect on the interior of the room.

Typically, low-current wires (Internet and telephone) do not cause any difficulties in laying; they can be hidden in baseboards, under metal thresholds or in platbands. When laying the power cable, a different approach is needed.

It is problematic to stretch power wires along the wall, since they are large in cross-section and almost always white, which makes them stand out significantly against the background of the wall.

Often, all electrical communications in our time are laid using a hidden method, but due to various circumstances this installation option is impossible, for example, when, during repairs, it becomes necessary to install additional sockets or switches.

Hiding the wire in the cable channel

Cable channel

There is almost always a section of wiring in the house that needs to be trenched into the wall or closed using a cable channel, which is a plastic box - it will protect the electrical wires from mechanical damage. The box has an attractive appearance and in this case it can be used as a decorative element. This option is also a solution to fire safety problems.

Laying the wire in the bathroom can be especially difficult when the walls and floor of the room are completely tiled. If there is a suspended ceiling in the bathroom, the wires can be hidden in it, and if this is not possible, then a cable channel will help in this situation.

It is not recommended to install sockets in the bathroom, and if you do not urgently need it, abandon this idea and limit yourself to installing lighting fixtures. If you need an outlet, then worry about safety precautions, and the outlet must be waterproof.

Wiring on the floor

Skirting board with cable channel

It is also worth paying attention to how the wires are laid on the floor. Today, special skirting boards are produced, in which a niche for the cable is structurally provided. The top panel of the plinth is removed, the cable is laid there, then it is put back in place. The advantage of this method is convenience and dust-free work. You can hide computer wires and a network cable in such a plinth.

Charger box

Often we get in the way of wires from various chargers. In this case, you can do as in the photo - hide them in a box specially made for this. If you can offer your own method, then at the end of the article you can add and attach a photo of your invention.

Installation of wiring on the floor

Strobe in the floor

If it is necessary to hide the wires in the floor, then using a wall chaser or hammer drill, a groove is made in the concrete, the wiring is threaded into the corrugation and placed in this recess. Upon completion of the work, the installation site is leveled with sand-cement mortar.

If your house has a wooden floor, then in order to install wiring underneath it, you will have to remove the boards and run the cable through a metal pipe.

Hiding the wires from the TV

As a rule, the TV is placed on the wall in plain sight, so the wire from the TV will be very visible to others. It is best to hide the wire in the wall and make the sockets behind the TV. For this purpose, a groove is made in the wall using a wall chaser, or if there is no such thing, then a hammer drill, the wires are collected and laid in a corrugation. Then the wires must be secured in the groove using special fasteners and brackets and plastered.

If you don't necessarily need to completely hide the wire, you can disguise it.

It is best to consider all the subtleties associated with wiring in the house at the stage of renovation of the premises, so that problems do not arise later.

We recommend that you read:

See how you can hide the wire from the lamp in the baseboard:

This video shows how to make and hide home theater wiring:

Photo

The wire from the sconce is decorated

Wall wiring options

Wire laying ideas

Wire decoration methods

This simple idea will improve the design of the room.

All wiring is hidden in the cable channel

Wiring hidden in baseboard

You can make this kind of furniture yourself

The wiring is laid in a groove

Source: https://kakpravilnosdelat.ru/kak-spryatat-provoda-v-kvartire/

How to hide TV wires on the wall: disguise options

By fixing the TV to the wall, you not only get a stylish and original interior design, but also solve a number of practical nuances:

1. First of all, there is a significant saving of free space - you can refuse additional, bulky furniture, which is especially important for small rooms.
2. In the kitchen, a hanging TV can be placed in a free corner so that it does not interfere with the main process - cooking.
3. In a family with small children, a TV on the wall is a necessary safety measure.
4. The wires are reliably protected from mechanical damage.
5. The child will not knock over a heavy object and damage the expensive device.
6. By eliminating additional furniture, cleaning the room is simplified.
7. If you hide the wires going to the power supply from a TV mounted on the wall, the room will look neat and aesthetically pleasing.

The weight of the device and the material of the walls affect the ability to fix the TV to the wall

Not every TV can be mounted on the wall - its weight and the material from which the wall is made matter. The structure should be quite durable. It’s good if the wall is made of concrete or brick – additional measures to strengthen it will not be required, as is the case with a plasterboard wall.

TV on a plasterboard wall

When mounting the TV to the wall, a ventilation gap is left between the back wall of the device and the vertical plane, which will ensure air circulation and cooling of the equipment. When fixing the TV inside a niche, the ventilation gap must be at least 10 cm, otherwise the device will overheat.

The console shelf under the TV is a practical and stylish element of the interior

When choosing a location for the TV, you must strive to ensure that the image on the screen is visible from anywhere in the room, but there is no glare when exposed to sunlight.

Note! When fixing the TV on the wall, you need to think about not only a way to disguise the power cable and antenna, but also wires from other equipment - a video player, home theater, digital or satellite television set-top box.

Cable masking methods

There are several ways to disguise wires. They are selected depending on various factors and have their own characteristics.

Masking using a cable channel

Hidden disguise - in the wall

Hidden wiring has recently become very popular, since the design of a modern interior assumes the absence of open wiring, wires and cords, unless the style of the room used does not allow otherwise. Thus, in interiors in grunge and loft styles, as well as in wooden houses decorated in Provence, shabby chic or country style, exposed wiring plays the role of a decorative element.

The free space behind the baseboard has long been used to lay wires indoors, but if the TV is placed on the wall, the wires will inevitably be visible. And if you consider that in addition to the television cord, it is necessary to hide the antenna cable and wires from other equipment, then it is obvious that drastic measures cannot be avoided. Making grooves for wires is a labor-intensive and dirty process, but the result is all the more neat and technologically advanced.

The most technologically advanced and aesthetically attractive way to disguise a cable is in a groove

The wires are carefully laid in the groove, and then tucked into the baseboard. If this method is chosen, then the groove is made at the stage of rough work.

Table 1. Installation of grooves.

IllustrationDescription

The first step is to select the location of the TV.

After this, the type of bracket is determined. It is recommended to select the model and size in accordance with the parameters of the device that will be mounted to the wall.

Markings are applied to the surface of the wall. To ensure that the lines are strictly perpendicular to the floor, a building level is used as a control tool.

Using a grinder, two parallel vertical lines are cut along the markings on the wall, deepening the cutting element into the concrete mass by 2 cm. The distance between the lines should be from 2 to 3 cm.

To remove the inner part between the cut strips, use a hammer drill

Using a diamond crown, a hole is made for the sockets. When purchasing it, you must take into account the number of connection points required.

The wires are placed in grooves and secured with plastic brackets - this way they will not fall out and interfere with further work.

Install the socket box.

The gate with wires is sealed with gypsum plaster. After drying, the material is sanded, preparing the wall for finishing, preparing the wall for finishing.

Masking using a cable channel

A cleaner, simpler and faster method is to use a cable channel. However, it is worth considering when choosing it that although it will hide the wires, it will remain visible. Therefore, you should carefully consider its color, design and material of manufacture.

Wall cable channel

If you choose a cable channel that matches the wall decoration, it will not be so noticeable. Alternatively, the flat cable can be covered with wallpaper along with the rest of the wall surface, or decorated with plaster or paint. To do this, it is necessary to take into account the cable material - the finishing material should fit well on its surface.

The cable channel consists of two elements - a guide rail with holes for fasteners, which is attached to the wall with dowels and a decorative overlay. Between these two elements there is free space in which the wires are placed.

Most often, plastic boxes are found on sale. They have:

1. Light weight.
2. Affordable price.
3. A variety of shades (white, colored, dark and light wood).
4. Moisture resistance.
5. Simple care.
6. Durability.
7. Durability.

Plastic looks cheap, so it will look organic in the interior only if the color scheme is chosen correctly. In a wooden house, the wires are hidden in a plastic box that imitates the texture of natural wood.

Aluminum cable channels will organically fit into an industrial or futuristic interior. Their structure and method of fastening to the wall are similar to plastic models. The advantages of aluminum products are flexibility, moisture resistance, strength and softness of the material.

Sequence of actions when attaching a cable channel

The products are presented in a wide range and are affordable.

Table 2. Average cost for cable channels.

IllustrationViewAverage cost as of April 2019, rubles

T-plast (100 x 50 mm) Material: PVC	178
PVC (25x16 mm) wenge	45
Metallic white 2m (25x20 mm)	200
ERA, PVC, oak, length – 50m (40×16 mm)	122
TMR, self-adhesive (15x12mm)Material: PVC Length: 2m	170
Legrand DLPlus (32x16 mm)Material: PVC Length: 2m	300
Industrial sleeve, pine (60x40 mm)Material: PVC Length: 2 m	230
Ruvinil (100 x 60 mm) Material: PVC	275
Eglo EXTENTION (120 mm)Material: metal Length: 1.5 m	2000

Disguise with furniture

The TV looks aesthetically pleasing and attractive when combined with special furniture that conceals the wires.

Methods for mounting a TV on furniture

Such furniture looks stylish and organic. In addition, it has additional functionality and can be used as a storage system.

Modern solutions for masking wires in furniture

Decoration method

It is not always possible to hide the wire in the wall or fix the box. For example, if the housing is rented. In this case, the wire remains to be decorated so that it does not catch the eye. There are advantages to this - the interior acquires an original design.

Table 3. Options for decorating the wire from the TV.

IllustrationDescription

A nearby living plant with dense foliage will help to distract attention from the wire and disguise it.

If the wires cannot be hidden, then you need to make them part of the interior, using them to create a complex decorative composition on the wall.

If a simple box for wires seems boring, then you can purchase a product in the form of a tree.

The cord can be decorated using homemade flowers made from colored paper and foil.

An original version of contrasting wall decoration. Using an acrylic helmet on the wall where the TV is located, they draw an abstract tree and “run” a cord along one of its branches - it merges with the color of the picture and becomes less noticeable.

Ready-made decorative ornaments can be purchased at the store or made from scrap materials. In any case, the wire must first be carefully fixed to the wall surface.

The cable can be used as an element of a decorative composition.

You can decorate and at the same time fix the wire on the wall using leaves or butterflies cut from colored adhesive tape.

In an eco-style interior, the wire itself can be decorated using hemp or jute rope. In this case, it will harmoniously complement the interior, combining with living plants and natural materials.

The cable can be hidden behind nearby furniture, plants, and curtains. Another option is to install a console cabinet under the TV and a box with shelves on the wall.

Decorative shelf on top of which you can place a TV

To decorate a modern interior, you can purchase a stylish and functional bracket with shelves.

A practical and expressive solution is to disguise wires using decorative wall panels.

A shallow niche in the wall is decorated using wooden slats, behind which all the wires are hidden.

In addition to their practical function, the panels are highly decorative; they create an expressive accent surface in the interior and shape its style.

Original design of wall panels

The material used to make the panels can be wood, metal, plastic, glass, or gypsum. Also, a false wall can be made from plasterboard. You can decorate such a wall with artificial or natural stone, mosaic, brick, paneling or wallpaper.

Illuminated decorative panels

Prices for popular finishing wall panels

The latest word in design is laminate wall covering. The wires in this case are hidden inside the frame. You can sheathe one wall or part of it.

Laminate on the wall in the bedroom

To attach wires to the wall surface, you can use decorative fasteners, which are decorations in themselves.

The cable channel for loft-style interiors has a special design. Outwardly, it looks like a metal pipe with a wire inside. In industrial styles, any communications, including wires, play the role of a decorative element.

Channel for wires in Loft style

Of all the existing methods, you can choose the one that is suitable in a particular case. If necessary, do not be afraid to show your creativity and imagination, creating original and functional decor from familiar, everyday things.

A Scandinavian-style bedroom is an excellent choice for those who are trying to follow fashion trends, but do not want to take too many risks and categorically abandon the usual things. In a special article we will give some professional tips on decorating Scandinavian bedrooms.

How to hide wires in a false wall

Source: https://remont-book.com/kak-spryatat-provoda-ot-televizora-na-stene/