How to sharpen disposable razor blades

How to sharpen a razor at home: best methods

Sharpening razor blades will seem like a useless and unlikely task to many. Why sharpen a razor if you can buy new cassettes or a disposable razor at the store? Almost all adherents of wet shaving think so, but the effectiveness of blade restoration is high, and the procedure itself is not difficult to carry out with your own hands.

Why sharpen your razor?

Wet shaving remains the most popular method of hair removal for both men and women. A high-quality shaving machine is not cheap. It is not always possible to buy new shaving cartridges or even a disposable razor. In this case, skills on how to sharpen a razor with your own hands will come in handy. Sharpening extends the life of the razor, thereby saving your budget.

Devices for sharpening razors

When consumer demand arises, you can always expect proposals from manufacturers. Thus, the company RazorPit (Denmark) has released a special device that allows you to sharpen razors at home. A more affordable analogue of this device is produced by the Ukrainian company Zattoch.

The devices consist of a plate or handle with a strip of plastic and an abrasive applied to it. According to reviews from users who processed razor blades with these devices, the service life of the machines increases almost three times. Sharpening occurs as follows:

• a small amount of any shaving gel is applied to the working surface of the device;
• the cutting part of the machine is passed along the abrasive surface in the opposite direction to the movement of the machine during shaving;
• perform 25–30 sharpening movements;
• The working surface of the device and the machine are rinsed with water.

The procedure takes no more than 10 minutes, and your shaving device is ready for use again.

Handy method - sharpening with jeans

If you don’t know how to sharpen a razor blade and you need to shave urgently, old jeans will solve the problem. Sharpening with jeans is the easiest and most affordable way to restore blades.

It will take a little longer than processing with ready-made devices, but the effect will be no worse. You will need denim, a small rounded block and a dull razor.

A round block can be successfully replaced by a cardboard sleeve from food foil or a school ruler. Further sharpening occurs as follows:

• denim is placed with the wrong side up;
• a cardboard block is placed under the fabric;
• the razor is passed along the fabric against the shaving movement;
• 100–150 movements are performed, after which the blade is rinsed with water.

Treatment with denim increases the service life of the razor by 2–3 times.

An alternative method is sharpening in a pyramid

If you don’t want to buy a special device, but the question of how to sharpen shaving blades is relevant, make a pyramid device. The pyramid is easy to use and can be used many times. The pyramid is made according to the size of the machine and is small in size. The device can be open, in this case made from ordinary wooden slats, or blind, when the four sides of the pyramid are sheathed with any available material.

The razor is placed inside the pyramid on a stand, the razor blade should face north. The device itself is also installed taking into account the cardinal directions. There is no scientific explanation for why the razor becomes sharp again in the pyramid. But, judging by user reviews, this sharpening method is effective. One disposable machine can be sharpened in this way from six months to four years.

Source: https://ubirayvolos.ru/sovety/kak-zatochit-britvu.html

How to sharpen a reusable razor

Almost everyone knows that a straight razor needs to be sharpened constantly. But few people know how to sharpen a razor on jeans.

With the advent of disposable and reusable (cassette) razors, people gradually began to forget about sharpening blades. But it turns out that it is also quite possible to sharpen a razor, significantly extending its life.

Considering that cassettes for a good reusable razor are quite expensive, this skill will not be superfluous and will save money.

How to sharpen a razor with improvised means

The razor has been a personal hygiene item for several centuries. The first special hair removal device, the straight razor, had to be sharpened before each use. Moreover, its blade was aimed at the belt directly during shaving.

Modern technologies have made it possible to create safe shaving machines. Many of them, such as "Vest" or "Chic", can be used repeatedly. But even branded cassettes gradually become unusable and require replacement. Each blade of the cassette is made of high-strength steel, but it still becomes dull over time and develops burrs, which leads to a painful shave and skin irritation.

Good cassettes for reusable machines (for example, “Vest - 3”) are quite expensive, and sometimes (for example, on a business trip or on vacation) there is simply no time or nowhere to buy them. It turns out that you can easily extend the “life” of a cassette. All you need is jeans and a little patience. If the denim item will serve further, then sharpening should be done on the wrong side. For these purposes, thick ribbed denim is best suited.

The sharpening procedure is as follows:

• Turn your jeans inside out to avoid ruining the item.
• Spread them on a flat surface.
• Place a foil roll, a flat narrow block, a narrow ruler or another flat object under the fabric, the width of which is less than the length of the cutting part in the cassette. This is a necessary condition, since there are protrusions along the edges of the cassette that will not allow you to sharpen the blade on a flat surface. The spacer must be placed under the fabric so that the fabric ribs run diagonally.
• Place the cassette blade on the block and move it along the fabric in the direction opposite to that in which the machine moves during shaving. And so we grind the blade 50 times, moving it only in one direction.
• We unfold the razor and similarly grind the cassette on the jeans, now moving it in the other direction.

After this procedure, you will be able to shave comfortably again. By periodically sharpening cassettes, you can significantly extend their service life. In this way, you can sharpen both disposable razors and branded razors, such as “Vest”.

Instead of denim, you can use a strip of leather of the required width, cut from an old belt or an unnecessary leather item. You should sharpen on the reverse – unpainted side of the leather. Sharpening occurs somewhat faster than on fabric. 20-30 passes in one direction will be enough. There is no need to sharpen in the opposite direction, as with jeans.

Special sharpening devices

Currently, special devices have begun to appear on the market, with the help of which you can easily sharpen the blade of any razor - both budget and reputable.

The simplest of them are designed for manual sharpening. The method is reminiscent of straightening denim. Only instead of jeans, it uses a strip of special plastic mixed with the smallest abrasive, laid on a convenient base in the form of a block. Such devices include RazorPit (manufacturer – Denmark) and Zattoch (Ukraine). According to manufacturers, with regular sharpening, a cassette inserted into the Vest machine can last 5-10 times longer.

The same devices can be used to sharpen disposable razors. The process is also very similar to sharpening blades on fabric. Place a drop of shaving gel or foam on the abrasive strip, and then run the cutting part along it in the direction opposite to the movement of the machine when shaving. 20-30 movements are enough for the blade to become sharp.

If you don’t want to sharpen your razor by hand, you can purchase a sharpening machine, for example Save A Blade from Bradex (analogous to Blade Saver made in China). This small, battery-powered device can quickly sharpen razor blades. It is enough to place the cassette in a special compartment, secure it, and turn on the machine for 5-10 minutes. The device is universal and suitable for sharpening any cassette razors.

If work to restore the razor's sharpness is carried out manually, then it must be taken into account that the blades in the cassettes are thin and can be broken if handled carelessly. It is necessary to move the cassette along the sharpening surface smoothly, without force, without pressing on the machine.

Sharpening blades in razors will significantly extend their service life, make shaving more comfortable, and also help save a certain amount of the family budget.

Source: https://mschistota.ru/sovety/kak-natochit-britvennyj-stanok.html

How to sharpen a razor – Beauty Magnet

Table of contents

• 1. What is important to know
• 2. Methods and step-by-step guidance
• 2.1. Sharpener RazorPit and cheaper analogue Zattoch
• 2.2. Denim
• 2.3. Leather belt
• 2.4. Pyramid
• 2.5. Sharpening with a stone
• 2.6. Sharpening with sandpaper
• 3. Features of sharpening a disposable razor
• 4. Features of Gillette sharpening
• 5. Features of sharpening a straight razor

The main accessory for men's daily grooming that requires attention is machines. Mainly used - disposable, T-shaped or reusable with replaceable cassettes.

It happens that the blade becomes dull or the replacement cassettes run out. You have to shave with unsuitable material, which results in severe skin irritation, abrasions on the face, and the hair is shaved poorly.

Home techniques will quickly restore the original appearance of the sharp material, extend the shelf life, help save money and help out in any situation.

Methods and step-by-step guide

Specialists, barbers and men who practice self-care for the machine use several methods.

Sharpener RazorPit and cheaper analogue Zattoch

The Danish company RazorPit has developed a sharpener for sharpening blades. This method is proven and has proven itself among users. There is also a budget analogue of the Ukrainian company Zattoch on the market.

An oblong leather plate on an adhesive tape, the surface of which is treated with diamond chips and is itself sharpened.

Using the RazorPit (Zattoch), the blades are sharpened as follows:

• A few drops of shaving gel are applied to the surface of the device.
• Then the razor moves in the opposite direction.
• 25–30 movements are recommended.

One procedure per month is enough to turn the machine into a reliable shaving tool. The video shows how to sharpen 3 different blades with a Zattoch sharpener.

Denim

You can sharpen a razor at home on jeans. Denim fabric on the reverse side is dense and rough, copes well with a dull blade.

Step-by-step instructions:

• The jeans are turned inside out.
• You need to place a hard thing made of cardboard or wood under your jeans. A ruler, a block, or a sleeve from plastic bags will do.
• The razor moves across the fabric in the opposite direction to a classic shave, without damaging the jeans.
• 30–50 times is enough.

As the machine is used, the procedure is carried out regularly until the material is completely thinned.

Leather belt

You can also sharpen your razor at home using a leather belt. The procedure is similar to the method with denim. A strong belt is selected from thick leather, turned inside out and 25–30 movements are made in the opposite direction. No less convenient and affordable way.

Pyramid

Some sources claim that the pyramid for sharpening a blade was invented by the Czech engineer K. Drobal. It can be bought or made from improvised materials. Cut a square from chipboard or cardboard, and the edges are parallel to each other (the size is indicated in the pictures below). Secure them with tape or glue in the shape of a pyramid. Further, according to the instructions:

• place the pyramid on a hard, flat surface;
• the design is oriented with its edges to the cardinal directions;
• place the blade inside the pyramid on a cardboard pedestal at 1/3 of the height, in the direction from south to north (or vice versa);
• keep the cassette in this condition for a week.

The surface of the blades must not touch anything!

Sharpening with a stone

Not everyone can succeed in sharpening shaving blades with a stone the first time; it also all depends on the material. For the procedure, synthetic stones without lumps with a uniform surface are used.

The procedure goes like this:

• The stone is wetted with water.
• The razor carefully moves along the stone in the opposite direction.
• 25–30 movements are enough.
• When sharpening a straight razor, carefully hold the blade with your thumb and forefinger. You should sharpen first on one side, then turn it over and sharpen on the other side.

Sharpening with sandpaper

Sharpening with sandpaper is a simple and straightforward method. Sandpaper with a grit of more than 2000, water and a flat surface are suitable for this.

Features of sharpening a disposable razor

If you find yourself in a place where your razor is inaccessible, then disposable razors come to the rescue. Therefore, sometimes you shouldn’t throw away the machine right away. You can rinse it thoroughly with water, then use one of the already known methods, and the machine will serve you well.

Features of sharpening Gillette

You can sharpen a Gillette razor at home using a pyramid or denim. Mak 3 machines have advantages over others, since the company has been producing razors for a long time and knows the needs of consumers well.

To properly sharpen a Vest razor blade using denim, watch the description above or the video.

Features of sharpening a straight razor

Sharpening a straight razor at home is not easy. It takes care, practice, and proper technique.

Sharpening features:

• Use belt or stone sharpening methods.
• Observe safety precautions with sharp objects.
• Maintain the correct sharpening angle.
• During processing, there is no need to press the device hard.
• Sharpen first on one side, then on the other.

Source: https://shkola-magnit.ru/volosy/kak-zatochit-britvennyj-stanok.html

How to easily sharpen any razor

I've been working in a barbershop for a year now, and a sharp razor helps me demonstrate my skills. Ordinary people use a standard razor for daily shaving, which can be purchased in almost every store or even stall.

People often come to me with the problem of sharpening a razor. Now I will share my experience and tell you how to sharpen the machine yourself at home.

Why does a razor blade become dull?

Some people still use disposable razors. However, if you look at it, their use is completely unprofitable. After all, after the first shave, the blades are completely dull. It is not possible to reuse them.

That is why you have to think about purchasing expensive machines, which, according to the manufacturer, will serve properly for quite a long time.

But often such assurances turn out to be untrue. Therefore, even if you use only expensive brands of razors, it will be impossible to insure against their gradual grinding. There are not many reasons why blades become unusable:

1. Frequent use. Any item that is frequently used will eventually become unusable. This is a pattern that cannot be ignored.
2. Violation of recommendations not only regarding the use, but also storage of the tool. Unfortunately, most men believe that there are no rules for storing a razor. However, this is a common misconception. Like any other tool, a razor needs to be stored properly.
3. Soaking in hot water. For some time now, men have been arguing about the ideal water temperature for soaking a razor. However, experiments have proven that this should only be done in cool water. Boiling water will cause the blade to begin to rust. That is why it is recommended to refrain from soaking in hot water or boiling water.

Sharpening at home or in a workshop: which is more profitable?

When purchasing inexpensive blades, most often, a person does not think at all about giving them away for “repair” after a certain time, since many consider this to be inappropriate. This is explained by the fact that the cost of the services of masters is quite high. Therefore, it is much more profitable to simply buy a new razor.

However, nothing like this can be discussed if an expensive blade was purchased. Throwing it away and buying a new one - such an idea would not occur to any person.

Everyone understands perfectly well that this is a completely irrational waste. And so people turn to private craftsmen or specialized centers where they can order such a service as sharpening blades.

Looking at the price tags of workshops, many men feel nostalgic for the times when they could use a razor with a wide blade. After all, it was sharpened using a small piece of leather.

It only took a few minutes for the blade to become sharp again. But few people realize that this can be done with modern razors. Of course, the set of necessary items for sharpening will change.

But at the same time, it can be done at home and save a lot. The main advantages of carrying out work at home, without the involvement of specialists, are:

• speed of the process - due to the workload of the craftsmen, sometimes you have to wait several days to pick up the sharpened razor. Such a long wait is not always possible. Especially if a person is going on a business trip;
• cheapness - doing it yourself is always cheaper than purchasing from another person or ordering any service;
• the ability to regularly update the sharpening at a convenient time - this is extremely important if the owner of the razor uses it for work. After all, such a tool is used often and becomes dull faster. It is simply not economically profitable to turn to a specialist for help every time. Moreover, downtime is also unacceptable.

As you can see, sharpening at home has many advantages. Therefore, it is not at all surprising that many people prefer to carry out this process without outside help. Let's look at the easiest way to do this at minimal cost.

Step-by-step description of the sharpening process

Any work must begin after the completion of the preparatory stage. In this case, this rule should also be applied. It is important to dry the blade as best as possible before using it. There should be no drops of water on it for sharpening to be as effective as possible.

For further work you will need old jeans. There are probably some of these lying around in a closet somewhere—you just need to look. If you cannot find jeans, it is enough to use only a piece of fabric that is not inferior in density to denim. Of course, the texture of the matter must be similar to achieve a 100% result:

1. Take the machine in your hand and start moving it across the fabric. Movements should be smooth and sliding. Please note that you must use the entire plane of the machine. If you neglect this recommendation, then there is a high probability that out of many blades only one will be sharpened, and the rest will not. This cannot be allowed to happen.
2. After running the loom over the fabric 20 times, change the direction of movement. If in the first case the movements resembled the shaving process itself, now they will be more like stroking. Because after changing the trajectory of movement, the blades will not “shave the fabric.”
3. As soon as the second stage comes to an end, you can begin the final procedure - cleaning the blades. After all, after running the machine over fabric, small fibers are guaranteed to remain on its blades. You need to get rid of them immediately so that there are no problems with the operation of the machine in the future.

By following the procedure described above, you can breathe a second life into your old machine. It is noteworthy that this method is also suitable for “revitalizing” disposable machines.

Of course, it is better not to use them more than 3-4 times. However, it is also not necessary to throw it away after the first use. With just a few minutes, you can sharpen them too.

Conclusion

1. The sharpening procedure should only be performed on a hard surface. It is absolutely unacceptable to hold the fabric in your hands and move the blade over it, since the likelihood of injury is too high.
2. You can use either a small piece of denim or the whole item.
3. Before starting the procedure, you should dry the blade.

   After making sure that there is complete absence of moisture on its surface, you can begin to work.

4. When sharpening, it is extremely important to apply light pressure on the machine so that the blade begins to sharpen. If you don’t put any pressure on it at all, the result will be insignificant.
5. It is recommended to repeat the procedure as necessary.

   As soon as it becomes noticeable that the blade is not as sharp as it should be, you must immediately, without delaying, start sharpening it.

Source: https://leydi-prelest.ru/semya/kak-prosto-zatochit-britvennyiy-stanok.html

How to sharpen a razor at home: instructions for different methods - Men's portal

Among all the variety of shaving devices, the most effective is the machine from a regular razor. However, this product has one big drawback: it quickly becomes dull and the cassette has to be changed frequently. For owners of razors, several effective home methods for sharpening them have been invented. This is discussed in more detail below.

Do I need to sharpen my razor myself?

The following facts support a positive answer to this question:

1. If you take it yourself, you can extend the life of the machine by approximately the same period of time.
2. Such actions allow you to save significantly, because... When buying a replacement one, you are spending a significant amount of money. And sharpening helps to postpone the trip for new accessories by 2-3 months.
3. In some situations, it is problematic to buy a new pack of replacement blades. For example, when you urgently need to shave. To do this without being distracted by going to the store, you just need to sharpen the blades.

Having used one of the sharpening methods once, everyone has the opportunity to learn how to do it efficiently and easily. If there is no need for these inventions, of course, it’s easier to run to the store and buy a new pack of cassettes. And anyone who sharpened a blade using one of the methods listed below will probably be happy to share their impressions of a positive result.

Using jeans: sharpening from scrap material

For those who don’t know how to sharpen a razor and need to shave urgently, old jeans will help solve the problem. Processing with this material is simple and accessible to restore the sharpness of the device.

Such sharpening of shaving blades will require a little more time than when processing using special devices. However, the result will be at the same level. To work, you need a round piece of jeans and a dull blade.

Additionally, you need to use a foil sleeve, a ruler, or take another flat wooden object. The width of the latter should be less than the length of the cutting part of the razor. This condition must be observed, because The edges of the blade contain ridges that may interfere with sharpening the razor.

The sharpening process is as follows:

1. The denim material is placed wrong side up on any smooth surface.
2. Place a block (cardboard or ruler) under the fabric. In this case, the scars on the tissue should be located diagonally.
3. Next, apply the razor itself, run it along the fabric and in the opposite direction. This step will take up to 150 movements.
4. When finishing sharpening, rinse the blade with water.

The “jeans” treatment process helps to increase the service life of the device by 2-3 times.

Sharpening a cassette in a pyramid

If you are wondering how to sharpen a razor and don’t want to buy any equipment, you can build a special pyramid for this purpose.

This device is useful for repeated use. Sharpening your razor is simple and convenient. When manufacturing, you should proceed from the dimensions of the machine. The device itself can be constructed from wooden slats and any available material that is used to cover the sides of the figure. Using machines with this device is very profitable.

The razor is placed in the inner part of the pyramid with the blade directed north. The device itself is also positioned taking into account the cardinal directions.

Why razor blades become sharp is still an open question for debate. Judging by the reviews of those who tried to build a special pyramid, we can conclude that the method really works.  

One razor must be processed in a pyramid for 1.5-4 years. Therefore, the device is considered effective and reliable, despite its secret technique of influence.

Sharpening accessories

When demand arises, supply always appears. Recently, on the windows of some stores you can find special devices that make it easy to sharpen a razor at home.

The device itself resembles a special pen, which is equipped with a small plastic strip. On the outer part of which a composition (abrasive) is applied, which sharpens disposable and reusable machines.

With this device, the service life is extended several times.

Such devices are easy to use and allow you to achieve good results. To process a razor using such a device, the following steps are taken:

1. Apply a small amount of liquid soap, gel or shaving foam to the top of the device.
2. The razor is taken and passed along the abrasive in the direction opposite to the movement during the operation of the blade
3. To achieve the result, you need to do about 30 movements. And this is enough, the blade of dreams will become sharp.

These are all the methods that solve the question of how to sharpen a razor. Using these simple devices you can save money and extend the life of your blades by several months.

Tips on how to care for a beard for men who have decided to adopt a brutal look. Description of specialized care products and devices

Read more

A straight razor whose sharpening is a complex procedure. Therefore, sharpening a straight razor must be done correctly. Effective ways to straighten a razor

Read more

Source: https://portalman.ru/kak-zatochit-britvennyj-stanok-v-domashnix-usloviyax-instrukciya-dlya-raznyx-metodov.html

How to sharpen a razor

A razor for a man is an item for personal use and daily use for shaving. Regardless of which machine is used, disposable or reusable cassette, the blades in them become unusable after some time. Even those made of high quality steel become dull after a while. It is impossible to shave with them - irritation and small cuts on the skin are guaranteed with such shaving.

Sharpening blades of disposable machines

If disposable razors can be changed without regret, since they are cheap, then changing cartridges in a reusable razor requires significant financial costs. But razors can be given a “second” life by extending their service life several times. Sharpening shaving blades can help with this. This can easily be done at home.

1. Sharpening with denim

This is the easiest way and does not require any financial or physical costs. How to sharpen a safety razor blade if it is a disposable machine? Before you start sharpening, the razor must be prepared by cleaning it from dirt, rinsing it under running water and wiping it dry with a terry towel. After preparation, the following actions are performed:

• denim fabric is being prepared. In order to protect it from small cuts, the fabric is turned inside out and placed on the table, that is, on a flat surface.
• a solid, even object (ruler, block) is placed under it, having a smaller width compared to the width of the blade. The machine must move freely over the surface of the object located under the fabric.
• a dense lining is located under the fabric, the hem of which runs diagonally.
• The razor blade is placed on a ruler or block and drawn in the opposite direction to shaving 50 - 60 times.
• the machine is turned and the other side of the razor is ground the same number of times.

In this way, the “life” of the razor is extended several times.

2. Sharpening with a leather belt

In addition to denim, good sharpening results can be achieved by using a leather belt or a piece of leather from something. The procedure is carried out according to the same rules as using denim.

• The blade of the machine is sharpened on the reverse, unpainted side of the belt.
• The result of the action will be faster than sharpening on fabric, due to the density of the belt leather.
• You need to move the razor blade along the belt half as much, that is, 10 - 20 times on one side and the other of the shaving surface.

In addition to a regular leather belt, you can use a belt used for straightening straight razors to sharpen the razor. How to sharpen a razor blade on this belt?

A belt for straightening a straight razor is a piece of leather with wooden handles attached to the ends of the belt, or the same piece of leather, but attached to a wooden block, that is, it has a flat surface. Sharpening a disposable razor with this belt is not particularly difficult. After 10 - 20 passes, the blade returns to its previous cutting ability, and the razor becomes as good as new.

3. Sharpening using the forearm

How to sharpen a razor blade if there are no available tools? You can use your own hand to make the razor sharper. The skin on the forearm, covered with vellus hair, resembles the structure of the leather of a belt. This property can be used to advantage.

• The disposable razor is carried from the elbow to the wrist.
• the sharp part of the machine turns away from itself.
• The razor is passed over the skin of the hand ten to twenty times.
• Having turned the machine, it should be guided from the wrist to the elbow.

This way you can sharpen the blade of a disposable machine. The quality of sharpening in this case will be slightly lower than the same action carried out on denim or on a belt. This is explained by the fact that the “living” skin of the hand is softer, and the grip on the shaving surface is less than when sharpening on other objects. The result of such sharpening is of less quality. But in some cases this method is quite acceptable.

4. Sharpening using a pyramid

The most unusual method of sharpening razor blades is the pyramid method. Despite the fact that it is patented and exists, the mechanism of this action cannot be explained. To carry out this method, it is necessary to make a certain structure.

4.1. Pyramid parameters

The pyramid is made from various materials. You can use drywall, regular cardboard or chipboard.

• The base of the pyramid is a square measuring 500 by 500 mm.
• the height of the edge is 400 mm.
• rib length – 480 mm.
• pyramid height – 320 mm.
• the height of the pedestal for the blade is one third of the height of the pyramid, that is, 107 mm.

The structure is glued using Moment glue or liquid nails. The main condition for the operation of the pyramid is the location of the faces and base of the structure along the cardinal points. The installation of the pyramid is carried out according to the compass. The edge of the pyramid is located to the north, and the sharpened blades “look” from south to north or vice versa.

4.2. Sharpening method

The blade of the machine is placed on the pedestal in the finished pyramid. A prerequisite for sharpening is that it does not come into contact with any objects. The razor remains in the pyramid for a week. After this period ends, it regains its original quality of sharpness.

Sharpening blades of reusable machines

Shaving machines are produced not only in disposable, but also in reusable versions. How to sharpen a razor blade on a cassette, and is there any way to do this?

The use of reusable machines takes much longer than disposable ones. But after a certain time, the blades of these devices become dull. You can sharpen a replacement cartridge using the same methods as disposable razors:

• using denim;
• using a belt;
• using the skin of the hand;
• using a pyramid.

The effect of sharpening by any of these methods will definitely be, in some cases greater, in others less. This method allows you to extend the life of razors and save money on purchasing new ones. Restoring blades after repeated use means you can always shave with a sharp razor, avoiding irritation and scratches on the skin.

Source: https://volosipro.info/uhod-za-volosami/kak-zatochit-britvennyj-stanok.html

Disposable shaving machine, how to shave correctly, which one is better

Disposable machines have become a part of human life, as they represent an affordable personal hygiene tool. They quickly and safely get rid of unwanted hair on any part of the body. Men, women, adults, teenagers will easily find a suitable machine for themselves, since there is a wide variety of models of this tool on the market.

Types of disposable razors

A disposable razor is designed for quick home depilation on the surface of the skin of the face, legs, armpits and other areas of the body. This is a modern, hygienic method of combating unwanted vegetation, which is in high demand in the market. The first such razor was the invention of King Camp Gillette, which was born in 1901.

The history of the Gillette disposable razor

The demand for the tool is pushing manufacturers to create new models taking into account the characteristics of the epidermis. There is no strict classification of machines. The choice is made based on the following indicators:

• number of blades;
• presence or absence of a softening strip;
• head mobility;
• ease of use.

Preference should be given to one blade when you need to work on areas with coarse hair and remove black, dense rods. However, such a machine is not suitable for areas with sensitive skin and folds, as there is an increased risk of cuts. Two, four, six blades work well on uneven areas, allowing you to remove hair more thoroughly and make the skin smoother.

Disposable machines with one blade are rarely suitable for sensitive skin areas!

The softening strip is designed to relieve and prevent irritation, lightly massage and lift hairs, which helps to shave them cleaner. Most popular brands use cosmetic-impregnated silicone. There are also metal strips, the purpose of which is to cool the epidermis, making the procedure more comfortable.

https://www.youtube.com/watch?v=tFmLA3pet7k

One of the purposes of the softening strip on the razor is to improve the glide of the blades over the skin.

The mobility of the head also plays a role - a special design helps to better treat areas with a lot of curves: chin, armpits, bikini. This machine compares favorably with similar tools in that it is less prone to hair loss. Additional treatment of the razor body with a silicone coating, which creates a special ribbed surface, also increases the comfort and efficiency of the process.

The unusual shape of the razor is not only the design, but also the work of manufacturers on the convenience of the tool

KAI Bikini Line disposable machines are designed specifically for the bikini area

The three blades of the Gillette Blue Simple 3 provide a closer shave than a single blade razor.

Dorco Pace 6 has an unusual design and is a serious competitor to Gillette machines

Gillette Simply Venus 3 is considered the most durable disposable razor among the entire series of similar tools of the same brand

Schick machines in most cases do not meet customer expectations, but are in demand due to their low prices

The quality of depilation with a razor largely depends on the correct use of it. To reduce the likelihood of irritation and allergic reactions after shaving, follow the sequence of actions during the procedure:

1. Prepare your skin with a hot bath or shower.
2. Remove dead skin cells and dirt with an exfoliator or a scrubbing shower mitt.
3. Distribute shaving foam or gel evenly over the entire surface to be treated.
4. Use a razor to shave the problem area according to hair growth.

   Shaving according to the hair growth avoids irritation as it does not damage the hairs.

5. For a close shave, repeat all steps against hair growth.

   Shaving against the direction of hair growth improves the results of the procedure.

6. Rinse off any remaining gel, pat the skin dry with a towel and apply a softening, soothing cream or hair growth inhibitor.

Read more about shaving rules in the article - Shaving rules for men and women.

Features of using razors by teenagers

When thinking about shaving for the first time, a teenager should draw the attention of his parents to his problem in order to find out whether the discomfort he experiences is objective.

If excessive hair growth is obvious, then before using all kinds of hair removal products, you should definitely consult an endocrinologist! Remember that from 11 to 14 years the hairs are predominantly light and soft in structure.

Any interference in their natural development provokes compaction of the rod and increased growth. The optimal period for the first use of the machine is 14–18 years. For a teenager, this is the most suitable and safe method of hair removal.

If genetic characteristics appear from early childhood, and the child has dense hair on the arms, legs, and abdomen, shaving is recommended no earlier than 11 years of age. An important condition for this are the following factors:

• the problem causes serious psychological discomfort;
• interferes with communication with peers;
• becomes the cause of complexes.

In other cases, it is better to postpone the first depilation until the age of 14–15 years.

Security measures

Safe use of the machine consists of correctly performing all stages of shaving and an objective approach to your own health. If you notice that hair has begun to grow very thickly, faster than usual, and also appears on those areas of the skin where it was not there before, postpone any type of depilation and hair removal until you consult with an endocrinologist or gynecologist.

Don't forget about regularly moisturizing your skin - maintaining the elasticity of the epidermis prevents severe irritation and ingrown hairs after shaving!

When using disposable machines, be careful not to cut yourself - some models have very sharp blades. For this reason, you should never move the razor head horizontally - only vertically!

Correct movement of the razor during depilation ensures the safety of the procedure

Is it possible to reuse a disposable razor?

A high-quality disposable razor is used 2-3 times. Repeated use leads to dulling of the blade and the inability to use it effectively. As a result:

• hairs are partially removed;
• the risk of scratches and abrasions from the machine increases;
• severe irritation appears.

It is not recommended to shave with a disposable blade more than three times, since organic particles of hair and skin accumulate at the joints between the parts of the product, in which bacteria then multiply. When cut, they cause blood poisoning, severe inflammation, and the formation of a pustular wound.

If you nevertheless decide for yourself that the selected machine can be used for a long time, contrary to the recommendations, then pay attention to the rules for caring for it.

Razor care

To maintain the safety of the disposable blade in the machine, the following rules must be observed:

• keep the razor closed using the original plastic cap or a closed container for hygiene products;
• Put razors that you do not use in a dry place - if there is high humidity in the room, the blades will rust;
• after each use, thoroughly rinse the blade under running water, the temperature of which should be 55–650C - higher values ​​lead to deformation of the blade;
• do not leave the razor wet after shaving - blot it with a thick napkin or a clean towel.

Is it possible to sharpen a razor yourself?

To ensure that a disposable blade lasts for 8–15 uses, take care to sharpen it periodically. To do this you will need two things:

Sharpening occurs in 2 stages:

1. Turn the jeans inside out and place them on a flat surface so that they do not slide off.

   Old, thick jeans work well as a means of sharpening a disposable blade.

2. Move the machine from bottom to top along the blades 50–100 times.

   Rubbing the blade against denim helps restore its sharpness for a short time

When sharpening disposable machines, remember that each time they are sharpened, they will lose their sharpness faster and become less effective!

A disposable razor is an excellent solution for emergencies, travel, and correction of small areas of skin when other depilation options cannot be used. The choice among modern models is huge: manufacturers offer razors in different colors, price categories and shapes to satisfy the needs of every customer. Proper use and care of the tool makes shaving safe and effective.

Source: https://manikyres.ru/kak-pravilno-britsya-muzhchine-stankom/

How to sharpen a razor blade: proven and effective methods

The availability and convenience of razors has led to them being extremely popular among both men and women. But it’s not enough just to choose a good razor, you also need to use and store it correctly so that it lasts longer and performs its functions efficiently. That’s why owners have questions about how to sharpen a razor so that the procedure gives the best possible result.

Most users do not try to sharpen blades at home, thinking that it is difficult and unlikely. But some still decide to find such methods and extend the life of the razor.

Such methods do exist and are quite effective at home. Although, of course, a razor blade is not a knife, it cannot be updated in the usual way.

Why sharpen your blades yourself?

The question of the appropriateness of sharpening procedures for razor blades is relevant, and there are several answers to it. Firstly, it allows you to extend the life of the machine. That is, instead of throwing away the razor, you can renew it and use it for the same amount of time.

Secondly, it saves money. After all, purchasing replacement cassettes regularly requires significant financial investments. And sharpening and updating them will help put off going to the store for at least a few months.

Thirdly, it is not always possible to buy replacement cassettes, but shaving is safe and sometimes simply necessary urgently. In order not to put off shaving until you buy a new blade, you can sharpen it and enjoy the result.

Sharpening a razor is a useful and convenient skill that can save money. Having tried to use any of the blade sharpening methods once, each user will be able to learn and perform the procedure quickly and efficiently.

Using a special sharpening device

Demand always creates supply, so not long ago special devices for sharpening blades at home appeared on the market. The device is a handle equipped with a small strip of plastic, on the surface of which a special abrasive is applied. It allows you to sharpen disposable and reusable razors with equal efficiency, extending their service life several times.

A prominent representative of such devices is the RazorPit device from a Danish company, although it also has a cheaper analogue, Zattoch, made in Ukraine. The devices are easy to use and give good results. The sequence of actions includes the following steps:

1. You need to apply a little cosmetic product – gel or foam – to the surface of the device.
2. Use the cutting part of the razor to move along the abrasive in the direction opposite to how the razor moves during the shaving process.
3. Depending on how long you use the machine, 25-30 movements are enough to get the blades sharp again.

The procedure is simple and effective, but you need to understand that the razor sharpening device itself also costs money. It may be cheaper to update replacement cassettes on the machine.

Sharpening the blade using denim

Instead of a blade sharpener, you can use denim or any ribbed fabric. The effect of this procedure is practically no different from using special devices, but it is cheaper and simpler. The procedure is as follows:

1. Jeans need to be turned inside out.
2. Under a small piece of fabric you need to place some kind of dense thing - a cardboard cylinder, a wooden block or a ruler.
3. Jeans are usually made from bias-cut fabric, so the thick lining needs to be laid flat. If the jeans are sewn straight, then the base must be fixed diagonally.
4. The razor is drawn across the fabric in the opposite direction to a normal shave. This sharpens the blades and keeps the fabric intact.

You can repeat the blade sharpening procedures several times until the steel becomes so thin that it can no longer be restored. But before this happens, you can use the machine much longer without spending much money.

If you need to sharpen the blades of an electric razor, it is better to contact a specialist. Its peculiarity is that for any action the razor will have to be partially disassembled, which means that then it will need to be assembled. For a beginner, this is not always a simple and easy procedure. But sharpening the blades of a conventional machine is a very real process that is worth trying at least once.

OPERATING PROCEDURE

1. To sharpen your razor , dry the blade first. Take old jeans, place them on a hard, flat surface and run the blade along the leg 15-20 times. You can also use a piece of denim for this trick.

1. Change the direction of the razor head and run the blade over the jeans another 15-20 times. Don't press too hard, just apply light pressure on the machine.

   The razor should glide easily across your jeans!

1. Ready! In a couple of minutes, the razor became as good as new - the sharp blade will not injure the skin and cause inconvenience when shaving! If only I had known earlier that sharpening a razor blade is so easy

I hope you will appreciate this technique and test it in practice! It will save you money, and your skin will be soft and smoothly shaved. Show your friends how to extend the life of your razor: the practicality of the advice is beyond doubt!

Did you like our site? Join or subscribe (you will receive notifications about new topics by email) to our channel in MirTesen!

Sharpening a razor at home: what is important to know

Many men believe that sharpening blades for a machine is an unlikely or completely useless task. Especially considering the fact that there is a huge assortment of new blades and cassettes on sale in stores. In fact, high-quality razors cost a lot of money, as do blades for such models. Therefore, experts recommend saving money and sharpening blades, unless, of course, you use a cheap disposable razor.

Only a few types of razors can be sharpened using this method:

• disposable machine,
• reusable razors with cassettes,
• T-shaped machines.

If, in addition to proper use and care, the blades are sharpened, a man will be able to provide himself with high-quality wet shaving and save money on the purchase of a machine or blades. Otherwise, the blades will not only cut hairs poorly and pull them out, but also scrape off the top layer of skin. An important condition for sharpening is to follow the instructions for all stages, otherwise you can dull the cutting surface even more.

Step by step guide

Today, the most pressing request from men in forums and communities is as follows - how to sharpen the blades of a Vest razor. This manufacturer offers high-quality machines with replaceable cassettes, which you can easily extend the shelf life yourself, without the help of a specialist. Most often, two devices are used for this action - a pyramid razor blade sharpener or ordinary denim.

You can make a pyramid yourself from a material that is incapable of magnetization, for example, plexiglass or cardboard. It is secured with glue or tape; it is prohibited to use metal fasteners. Further sharpening is carried out as follows:

• mark the pyramid on a hard, straight surface,
• then the pyramid is oriented to the cardinal points,
• the razor blades should be placed along the pyramid in the north-south direction,
• the blades should lie in this state under the pyramid for 6-8 hours.

The same method can be used to sharpen blades for cassette razors such as Gillette and other brands.

Many men have been successfully practicing the technique for many years, noting its ease of use and high efficiency. Using a special device from RazorPit or Zattoch, blades on a cassette or removable blades are sharpened as follows:

• Apply a little shaving gel to the surface of the device,
• further along the abrasive surface, but in the opposite direction, as when shaving, perform movements with the machine,
• do 25-30 such movements at a time,
• At the end, the machine and working fixture will need to be rinsed with water.

Just 5-10 minutes of such manipulations will be enough to revive the blades of the machine and give the razor a second life. This will not only save money, but also provide a man with high-quality and effective shaving of stubble and mustache without irritation and other consequences.

Handy tools to help

If a device such as a razor sharpener is not suitable for a man, you can use improvised means, for example, denim. This is one of the first methods that was invented by men many years ago. It is enough to simply turn the fabric inside out, and then run the loom with the blades inside against the direction of the fabric threads 30-40 times, but without pressing.

Another handy method is a leather belt, and sharpening the blades follows the same scenario as with denim. You need to choose a belt that does not have frayed areas or creases, otherwise the surface of the blades will be damaged. You need to move the blades along the belt from its wrong side. This will maintain the integrity of the painted side of the belt while improving the functionality of the machine.

Is it important to use special devices?

In fact, any selected razor sharpener should be approved by experts, like a leather belt, pyramid or denim. Other unfamiliar techniques and untested means at hand can easily damage the integrity of the blades, since we are talking about a metal plate with a thickness of 0.5 mm or less. Although there are many razor sharpeners sold online, only a few actually do the job.

If we are talking about an expensive machine and blades, it is better to purchase sharpening options such as a device from the RazorPit brand or its Ukrainian equivalent from the Zattoch brand. In such a device you can sharpen both blades and cassettes of a safety razor without fear for their integrity and functionality. If a man prefers the cheap option of sharpening on jeans, you need to correctly observe the direction of the blades perpendicular to the direction of the threads in the fabric.

Razor accessories all have their own service life, which depends on the materials used in the production of the razor itself and the quality of the blades in it.

Disposable razors are used no more than 1-3 times, but T-shaped razors and reusable razors will last longer if you change the cutting parts on time. And in order not to spend money on buying new “feathers”, you can sharpen them in a timely manner.

To do this, you may need a special device, as well as a pyramid of improvised materials, a leather strap or denim.

Watch the video: Once you learn this secret, you will never throw away a plastic bottle again! (January 2020)

Source: https://ru.mazorhomes.com/1160-do-it-yourself.html

Life hack: how to restore the sharpness of a disposable razor

A razor is one of the main hygiene products for men. The comfort and quality of daily shaving depends on its sharpness, so it is very important to maintain the sharpness of the blade.

Why sharpen disposable blades?

The vast majority of people throw away disposable razors when shaving becomes uncomfortable, when the blades lose their sharpness. They don't know how to sharpen a razor, or don't even know that it's possible. The advantages of sharpening razor blades are obvious:

• Extends blade life. This fact in itself is pleasant and the following positive point follows from it.
• Saving money on purchases of replacement cassettes. If you double the service life of the blade, you can buy new sets half as often, which will significantly save your budget.
• In addition, sometimes there is an urgent need to shave, but there is no opportunity to go for new cassettes. At such moments, sharpening skill can save you from an unpleasant situation.

Every man should know how to sharpen a razor at home; this skill will definitely not be superfluous, so it is better to practice this in advance, so that in an emergency you can sharpen the blade quickly and without problems.

Special devices

Demand creates supply, so some manufacturers of shaving accessories thought about how to sharpen razor blades on a cassette, and began to produce special abrasive devices for self-sharpening razors, disposable and reusable.

RazorPit

An example of such devices is RazorPit. Its device is very simple: on a platform with two handles there is a plate of thermoplastic elastomer, which serves as an abrasive. The manufacturer promises an increase in the service life of the razor by 6-10 times; according to user reviews, the service life increases by 3 times, after which the blade becomes completely unusable. The price of such a product is about 20 dollars.

How to sharpen a razor using RazorPit:

1. First you need to install the device on a comfortable horizontal surface.
2. Then apply shaving foam to the surface of the plate.
3. Run the cutting part of the razor three to four times along the abrasive surface in the direction opposite to the movement of the razor during shaving.
4. At the end, be sure to rinse the sharpener and the razor itself under running water.

Important! Actions when sharpening should be careful, smooth and without pressure, so as not to break the blade.

Zattoch

The budget analogue of RazorPit is the Ukrainian device Zattoch. It works in the same way, but costs only $4. The Zattoch is a strip of artificial leather coated on one side with diamond chips that sharpen the razor.

The sharpening process is no different from sharpening on the RazorPit, and the number of movements required depends on the time the blade is used.

Zattoch is perfect for saving the family budget, as it pays for itself immediately after sharpening the first set of cassettes, and lasts for years.

Save a Blade and Blade Saver

These two devices are battery operated and sharpen blades automatically. The advantage of this device is that you do not need to manually sharpen the razor. Minus – the process takes from 5 to 10 minutes. To sharpen a blade, you need to place it in the machine, secure it and turn on the device.

Sharpening with improvised means

If you urgently need to shave, but all the blades are dull and there is no sharpening device, you can use the extreme method of sharpening a razor at home. Instead of a device with an abrasive, you can use thick denim or leather; their effectiveness is much worse than that of diamond coating or elastomer, but in emergency cases there is no choice. You can sharpen the razor until the blade becomes too thin.

How to sharpen a razor on jeans:

1. Dry the razor.
2. Turn the fabric inside out and lay it out on a stable surface.
3. Secure your jeans with a comfortable platform lining. It should be narrower than the cutting part of the blade, since there are protrusions along its edges that will not allow you to sharpen the razor on a flat surface.
4. Run the cutting edge of the razor along the fabric in a direction.
5. Rinse your razor before use.

The process of sharpening on jeans takes longer than using a special device, since denim does not grind the blade down much, and therefore there should be much more movements.

In this case, every movement must be careful so as not to spoil the fabric.

How to sharpen a straight razor

They say a real man should be able to use a straight razor, but in this case he should also be able to sharpen it. This process is a little more complicated than sharpening razor blades from disposable razors, but anyone can do it. The simplest method for sharpening a straight razor blade is to use a whetstone.

How to sharpen a razor:

1. First, the stone needs to be wet.
2. It is necessary to sharpen by moving the razor in both directions: away from you and towards you, each time changing the side so that the direction is opposite to the movement of the razor during the shaving process.
3. To get rid of the resulting nicks, the razor needs to be straightened. For this purpose, leather belts are used, on which GOI paste is applied.
4. Movements on the belt are similar to movements on a whetstone. The belt must be tensioned.
5. Finally, the blade should be rinsed and wiped.

How to sharpen an electric razor: complete instructions. How to sharpen a knife so it becomes like a razor

The advantages of an electric razor are the circumstances it requires for shaving. More precisely, it does not require it, since using an electric razor you need to remove excess hair dry without water, foam or other shaving products. The device is compact and mobile, so it can be used anywhere. Ideal would be devices that have a self-cleaning function, but there are still few such models on the sales market.

Important! Dull blades do not cut, but pull out stubble hairs, scraping off the top layer of skin.

During operation, it will be necessary to sharpen the blades of an electric razor, and even if we consider models with self-sharpening blades, sooner or later it will be necessary to sharpen them. Some men prefer to simply replace the blades with new components, while others turn to specialists. In fact, many people will be able to sharpen their electric razor blades themselves to restore its functionality.

Special sharpeners for blades

To sharpen the blades of all kinds of safety razors, including electric razors, experts recommend using special sharpeners from different manufacturers. Due to the fact that demand always creates supply, such devices have been created for self-sharpening knives and blades. We are talking about a pen-shaped device with flat plastic, the surface of which is treated with abrasive.

Thanks to the abrasive, such a device can be used to sharpen the blades and knives of shaving tools, be it disposable or reusable machines or electrical appliances. A prominent representative of such a sharpener is the RazorPit device of Danish origin, as well as the Ukrainian analogue of this device Zattoch with an affordable price.

Instructions on how to sharpen electric razor blades with such a sharpener include several steps:

1. A little shaving gel or shaving foam familiar to men is applied to the surface of the sharpener.
2. The cutting part of the device must be moved along the abrasive opposite to the direction that a man follows when shaving.
3. The number of such movements should be about 20-30 times, depending on the service life of the electric razor.

Have you ever heard of such sharpening?YesNo

In fact, sharpening blades using sharpeners is the easiest and most accessible way for many men to revive a razor. Sharpeners are relatively inexpensive and can be used for their intended purpose for a long time, guaranteeing sharp sheaths for electric razors or razors.

Expert opinionAlexey StrizhnikovBarber, expert on men's haircuts “If you have never sharpened blades before or worked in this direction, it will be safer to give this work to specialists, or buy a new razor!”

How to sharpen an electric razor at home?

Electric razor blades are usually made of stainless steel, which is coated with a layer of ceramic or titanium on top. Any owner will need to sharpen an electric razor sooner or later, so the issue of self-sharpening at home is relevant for everyone. Experts offer several effective techniques that will help every man get used to resuscitating an electrical appliance and returning it to service.

Using sandpaper

The most standard sharpening of electric razor blades involves the use of 1200 or 2500 grit sandpaper. To do this, you need to remove the knives from the electrical appliance, and then treat the surface with 1200-grit paper. Namely, insert the knives into the shaft or cardan of the device, place it and firmly press it against the paper, then turn it on and hold for 10 seconds.

after such processing, repeat all the steps, only use paper with a maximum grain size of 2500. at the end of the work, all components are cleaned, the workplace is cleaned and the electrical appliance is assembled. Experts advise using sandpaper without a soft backing when it comes to sharpening electric razor knives. This technique is followed with such machines for which other methods are not effective, for example, the “era - 100” model.

using a screwdriver and glass

To begin with, a man needs to have a drill with reverse or a screwdriver, and also prepare glass for sharpening the knives of the device. The principle of sharpening implies the reverse reverse of the screwdriver, since moving it clockwise will only dull the blades even more. The blades are taken out of the razor, placed under glass, after which the knives are sharpened using a triangular attachment and a reverse movement. small turns of the screwdriver last no more than 5 minutes.

using goi paste

sharpening a razor involves the use of another device - goyim paste. this product was first released for sale a hundred years ago. The original purpose of the paste was to polish metals, stone, ceramics and steel, and later for other surfaces. Today, several types of pasta are offered for sale:

• for a matte effect on the surface;
• for rough polishing;
• for a glossy effect and finishing.

If we talk about the metal of electric razor knives, the paste cannot be applied to it in its pure form; it is diluted to the state of a solution or applied using a soft cloth. An electric razor is sharpened with goya paste as follows:

• the paste is dissolved in a vessel with a small amount of vegetable oil;
• add a little solvent to the mixture;
• Next, the electric razor knife blocks need to be lowered into the solution;
• you need to hold the knives for as long as the average shaving procedure lasts;
• At the end, you need to wipe the knives with a paper towel and reassemble the device.

paste manufacturers and specialists in sharpening blades and knives of electrical appliances note that after these manipulations the device will work like new. When changing blades, it is advised to first carry out a similar polishing paste so that the razor works 100%.

step by step guide

Today, the most pressing request from men in forums and communities is as follows - how to sharpen the blades of a Vest razor. This manufacturer offers high-quality machines with replaceable cassettes, which you can easily extend the shelf life yourself, without the help of a specialist. Most often, two devices are used for this action - a pyramid razor blade sharpener or ordinary denim.

You can make a pyramid yourself from a material that is incapable of magnetization, for example, plexiglass or cardboard. It is secured with glue or tape; it is prohibited to use metal fasteners. Further sharpening is carried out as follows:

• mark the pyramid on a hard, straight surface;
• then the pyramid is oriented to the cardinal points;
• the razor blades should be placed along the pyramid in the north-south direction;
• the blades should lie in this state under the pyramid for 6-8 hours.

The same method can be used to sharpen blades for cassette razors such as Gillette and other brands.

Many men have been successfully practicing the technique for many years, noting its ease of use and high efficiency. Using a special device from RazorPit or Zattoch, blades on a cassette or removable blades are sharpened as follows:

• Apply a little shaving gel to the surface of the device;
• further along the abrasive surface, but in the opposite direction, as during shaving, movements are made with the machine;
• make 25-30 such movements at a time;
• At the end, the machine and working fixture will need to be rinsed with water.

Just 5-10 minutes of such manipulations will be enough to revive the blades of the machine and give the razor a second life. This will not only save money, but also provide a man with high-quality and effective shaving of stubble and mustache without irritation and other consequences.

https://www.youtube.com/watch?v=odthIW3xTmc

How to sharpen electric razor blades?

Sharpening method using glass and a screwdriver

To sharpen knives in this way, you need ordinary glass and a screwdriver or drill with reverse.

Important! To sharpen blades in this way, it is necessary to use reverse reverse - clockwise movement will only dull the knives even more.

The blade, previously removed from the razor, must be placed on the glass and sharpened using a triangular nozzle and reverse reverse. The screwdriver should operate at low speeds, the whole process will not take more than 5 minutes.

Sharpening a dull razor

Sharpening a machine is not a tricky thing at all, as they say - even a child can do it.
We lay down the fabric, place the machine on it and run it from below. We raise the machine, move it down, lower it and repeat the operation 80-100 times. This happens quite quickly, it won’t take much time. Now let’s look at everything in detail. Here is the first microscope shot of the blunt machine before sharpening.

As can be seen from the photo, the edges of the blades have an uneven and torn cutting surface. It’s as if they are eaten away. We make about 30-40 movements on the denim and again look at the result under a microscope. And we see a concrete improvement.

Not only did the blades become clean and shiny, but the cutting edge was noticeably transformed and became almost even. Then, after the next 40-50 movements, the result exceeded all expectations. The edge of the blades was completely leveled and returned to almost its original condition.

What this photo shows:

Don't make the knife too sharp

Many people want to give a knife blade the sharpness of a razor. However, in the case of a kitchen knife, this is still not recommended. After all, when cutting food, it will quickly become dull again. A rough edge has a better effect on food fibers. This means that such a knife will have some properties of a saw. A coarse sharpened tool is well suited for cutting meat and chopping vegetables.

However, there is one type of product that, on the contrary, is better to cut with a blade sharpened to a razor sharpness. We are talking about fish. When it is necessary to cut fish, it is better to use a knife with a fine sharpening.

Source: https://alkomir.net/kak-zatochit-elektrobritvu-polnaya-instruktsiya-kak-zatochit-nozh-chtoby-stal-kak-britva/