How to sharpen nail scissors at home - For problems
Scissors are the second most frequently used cutting tool in the kitchen after a knife. Without them, it can be quite difficult to cut up fish, some parts of poultry carcasses, etc.
But, unlike the said “king of the kitchen,” their area of use goes far beyond the boundaries of this territory. After all, there are also scissors for gardening, tailoring, manicure, hairdressing, etc. Depending on their purpose, they have different shapes and sizes.
With frequent use, the blades become dull. Therefore, you have to think: is it possible and how to sharpen scissors at home? The tips presented in this article will help solve this problem.
Surely some of them will be useful due to their simplicity and ease of use, and they will be used by housewives if necessary.
Method one: how to carry out preliminary sharpening “in a hurry”
It is possible that there are neither special materials nor appropriate sharpening devices at hand. In addition, the problem must be resolved quickly and without delay. After all, there are such situations, for example, when you urgently need to finish cutting a dress, and the scissors begin to “chew” the fabric.
In this case, take an ordinary needle and, as it were, cut it, moving the blades with some force. You can use a thin glass object (a bottle neck) or some kind of iron rod for these purposes. Of course, this method of sharpening scissors does not provide 100% quality results.
But for some time you can still experience the tangible sharpness of the blades in practice.
Method two: how to sharpen scissors using sandpaper
The technology for carrying out the work will be similar to the tips described above. To do this, take a small piece of sandpaper and cut it with scissors in different directions. You can also rub the blades with the specified material, pressing lightly from above.
In this case, it is necessary to use coarse-grained material, which is easier to process. When working, be sure to take into account that the sharpening area is the outer edges of the scissors. You cannot rub the inner surface, otherwise you may not “cure” the instrument, but ruin it.
These two options for sharpening scissors are quite simple and accessible. But for better results, you can use other methods.
Method three: use a file
There are special whetstones that can be used to sharpen not only kitchen knives, but also scissors. These also include various diamond needle files. To process the blades, they are carried out several times on the specified object, which lies on a flat surface.
With one hand you need to press the block to the table, and with the other hand you need to move the scissors (leaning against the outer side of the tip) in the direction from the handles to the ends. They work a little differently when using a file. It will take some time to sharpen the scissors well. In one hand (working) a file is held by the handle, in the other - open scissors.
You can rest the tip against some non-slip surface for support. After a few strokes, carefully test the sharpness of the blade surface with your finger.
Method four: how to sharpen scissors using special tools and devices
There are several types of processing devices. First of all, these are, of course, special machines. By lightly pressing the blade against the rotating disk, sharpening occurs. Of course, this requires a certain skill and skill.
There is also a risk of injury to fingers, so children should never be allowed to operate these devices. A simpler and very convenient device, especially for direct use by women, is a sharpener for knives and scissors, sold in supermarkets and hardware stores.
Just one movement and the blades will be sharp without any additional processing. Therefore, having such an item at hand will be very useful for the housewife.
Sharpening in several stages
So, having studied all the options described, how to sharpen scissors correctly? If there are no special factory devices at home, it is recommended to carry out the work in several stages to obtain the best result.
To do this, before machining, remove accumulated dirt from the blades using a cotton swab or a cloth soaked in solvent. Depending on the purpose of the scissors, this may be soil, food residues, paint, fine fabric dust, etc.
Removing the extraneous layer will ensure a better result. Then use a file or coarse stone first. After this, to secure the result, use coarse sandpaper, and then fine sandpaper. Finally, lightly tighten the bolt holding the blades together.
After all, perhaps this was the main reason that the scissors do not want to “obey” the master.
All! The gun is ready to go!
Source: https://otproblem.ru/kak-zatochit-manikyurnye-nozhnicy-v-domashnix-usloviyax.html
How to sharpen nail scissors at home
Scissors are an indispensable attribute in any family. Over time, their blades lose their sharpness. Fortunately, almost any scissors can be sharpened.
How to prepare scissors for sharpening
Before you start sharpening, check whether the performance of the blades is actually affected by dullness. Sometimes scissors may not cut well due to the loosening of the connecting element. It could be a bolt or rivet.
After fixing all the problems, cut something and thereby check whether sharpening is needed. If the blades do not cut well, you will need to sharpen them. Before use, wipe the knives with a cotton swab and an alcohol solution. Remove more stubborn stains using suitable chemicals.
Self-sharpening methods at home
There are many ways to sharpen scissor blades at home. To do this, you can use improvised materials that are found in almost every apartment.
Needle or awl
To sharpen you will need a thick needle or awl. The method is quite energy-intensive, so it is suitable for processing small scissors.
Cut the selected item from the rings to the tips of the blades. Try to guide the needle along the sharp edges. Your actions should not be performed through force.
Metal sponge
You can use either new or used metal sponge. The softer the sponge, the better.
Cut the sponge with scissors, using the entire surface of the blades. The more cuts you make, the sharper the blades will be. Please note that during the procedure the sponge crumbles a lot, so it is better to cut directly above the trash can.
Glass jar or bottle
In this procedure, it is best to use an unnecessary jar, since after sharpening there will be scratches on the glass.
- Take the jar in your hand and make the required number of cutting movements. During sharpening, the entire surface of the blades should touch the glass.
- After work, carefully remove small glass fragments from the surface of the blades.
- If you need to sharpen small scissors, use a glass bottle with a narrow neck.
Foil
Take a sheet of foil and fold it into 6-8 layers. You should get a fairly dense layer. Cut the foil into small strips, using the entire surface of the blades. The duller the knives, the more cuts you need to make.
Special sharpeners
A special sharpener can be purchased at a hardware or construction department or ordered from an online store.
Open the scissors and slide each blade through the designated hole. Do the required number of passes until the blades become sharp.
Sandpaper
Like other available materials, scissors are sharpened with sandpaper by cutting it. First, fold the paper in half with the rough side facing out and cut into small strips.
The finer the sandpaper grains, the better. The ideal option would be zero-grit sandpaper.
File
Open the scissors to their maximum width and hold with your hand where the blades meet. This will allow each half to hold tightly and not become loose during the procedure.
File the inside of each blade at a 70 to 80 degree angle. Make movements either only from yourself, or only towards yourself. Never saw the blades by jerking back and forth. Just a few movements are enough to sharpen.
If you cannot hold the scissors tightly with your hand, use a vice.
Grindstone
A similar stone can be purchased at a hardware store or hardware store. Before sharpening, separate the scissors into their component parts by unscrewing the central screw. Apply each blade in turn to the stone with its sharp side and make several movements towards or away from you until the desired sharpness is achieved. At the end of the procedure, assemble the halves by connecting them with a central screw.
Grinder
To use a sharpening machine, sufficient experience and dexterity is required.
The machine is a device with a rotating abrasive wheel. Simply turn on the device and place the halves on the sharpening disc.
In the procedure, it is extremely important to know what angle must be maintained between the blade and the wheel, as well as how long to sharpen, so if you are not familiar with the device, give preference to another method.
Paper clip
Please note that the larger the paperclip, the better.
Hold the paper clip tightly with the tips of the blades and slowly, squeezing the scissors with your fingers, draw it to the base. Repeat the procedure until the scissors are sharp enough. You'll know the scissors are sharpening when you notice small nicks in the paper clip.
Battery
In a similar way to a paper clip, you can sharpen scissors using an unnecessary AA battery. Please note that the battery must be in a metal casing. Clamp the battery with the blades and move it to the base the required number of times.
Screwdriver
Since the paperclip or battery is quite small, it can be replaced with a screwdriver to sharpen larger scissors. Place the screwdriver, metal side down, on a hard surface. Pinch it with the tips of the blades and slowly move it to the base. Repeat as many times as needed to keep the blades sharp.
Where can you sharpen scissors?
Typically, this service is provided in key-making or shoe repair shops. The cost of sharpening scissors is from 50 rubles, depending on the complexity of the service.
Subtleties of the sharpening process
Depending on the type and purpose of the scissors, sharpening may have some subtleties and nuances.
Regular
Scissors that cut paper or other materials can be sharpened at home, spending very little time. Use foil, sandpaper, or another metal-coated object to sand the blades.
Kitchen
At home, it is best to sharpen kitchen scissors in a way that does not require disassembling them. Foil, sandpaper or metal sponge work well. However, such sharpening will not provide long-term results. For better processing, contact professionals.
Manicure
High-quality manicure scissors are quite difficult to sharpen at home. To do this, you need to know how to properly tighten the connecting element and what the sharpening angle should be. The blades are processed with a special diamond needle file from base to tip.
Hairdressers
Hair cutting scissors are made from high-quality materials, as they are designed for a long service life. Properly sharpening blades at home is very difficult and risky. Entrust sharpening to a professional who uses special laser equipment for the job.
Thinning
Thinning scissors have a special structure. They consist of double blades - serrated and straight. It is impossible to sharpen such an item at home, since the work requires certain equipment and knowledge.
Source: https://crast.ru/instrumenty/kak-natochit-manikjurnye-nozhnicy-v-domashnih
Principles of sharpening manicure instruments
To restore the attractiveness of your nails and remove interfering hangnails, you need to use tweezers, scissors, and a file. However, after prolonged use of these devices, the cutting edges become dull. To restore their sharpness, you need to know how to sharpen manicure tools.
Set of manicure tools
What types of sharpening are there?
There are two types of sharpening manicure tools. Each of them has certain features that need to be taken into account when restoring sharpness and working with cutting edges:
- Factory - contrary to the opinion of many people, it is considered a bad option for high-quality, long-term work. The edges do not cut materials along the entire length, and sharpening is not completed. If the working parts are sharp, they will become dull much faster than after professional sharpening.
- Manual - sharpening of manicure tools, which is performed using various devices. These include diamond bars and round abrasive stones. The quality depends on the chosen method of sharpening and the skill of the person.
We must not forget that manual sharpening requires perseverance and attentiveness from the master.
What professional equipment is used for sharpening manicure tools?
Sharpening of manicure tools is carried out in specialized workshops. The cost of sharpening depends on the type of device, the level of skill of the worker, and the status of the workshop. The average price is 300 rubles.
Due to the fact that sharpening can cost quite a bit of money, many manicurists advise ordering a similar procedure when it comes to working with expensive, high-quality tools that would be a shame to ruin if you try to sharpen them yourself.
To perform the procedure, craftsmen use specialized machines:
- Laser - modern high-precision installations that allow you to work equally effectively with different alloys and metals.
- Mechanical - common machines that are equipped with diamond-coated round grinding wheels.
Working with mechanical equipment is much more difficult. This is due to the fact that you need to choose the right number of revolutions and use water cooling. In addition to this, it is necessary to slowly move the cutting edge relative to the abrasive so that turning occurs evenly along its entire length.
Sharpening small tools
Sharpening tools at home
Before you start sharpening cuticle nippers, tweezers, files, tweezers, you need to prepare the equipment for the procedure:
- sharpening stones of different grain sizes (for rough and finishing);
- sheets of foil;
- sandpaper;
- napkins;
- file.
Sharpening different tools involves carrying out certain actions sequentially one after another. It is necessary to talk in more detail about each of the methods of carrying out procedures.
Cuticle nippers
Step-by-step instructions for sharpening nail clippers at home:
- Initially, you need to eliminate the backlash. To do this, you need to open the wire cutters, place them on the table, and lightly tap them with a hammer.
- Clean the joints and cutting edges from dirt and dust. Degrease them.
- Use a file to remove rough edges from the blades. Movements should be leisurely.
- Close the cutters. Place them on the table, the edges should be on top. Use smooth movements of the file to remove irregularities.
Using a fine-grain stone (about 8000 grit), go along the cutting edges. After this, lubricate the moving element with oil.
Nail clippers
Nail clippers can be sharpened using sharpening stones of different grits or sandpaper. Step-by-step instruction:
- Clean the tweezers from dirt and debris.
- Degrease working parts with alcohol.
- Sand them with coarse, finishing sandpaper. Remove visual irregularities. Run your fingers along the edges. If the metal scratches the skin, you need to repeat the treatment with an abrasive.
Remove metal dust with a cloth.
File
Nail files made from glass are becoming increasingly popular. Their advantage is that after processing the nail plates, they do not delaminate. If the file becomes dull, there is no need to throw it away. You need to take the tool to a specialized workshop for resharpening.
Tweezers
Tweezers are a secondary manicure tool. Sharpening it is no different from the procedure for sharpening cuticle nippers.
How and with what to check the sharpening level?
After carrying out the procedure for resharpening manicure tools, it is necessary to check its sharpness. To do this, you can try cutting several materials:
- stretch film;
- vinyl or latex gloves;
- plastic bag;
- wet wipe.
There should be no difficulty in cutting. If you have to apply more force, you need to treat the working parts with abrasive again. In addition to cutting, you can determine the sharpness by running your fingers along the cutting edge without pressing. Metal should not cling to the skin or leave marks.
Latex gloves for testing sharpness
Useful tips
Recommendations:
- Inexpensive tools do not need to be taken apart. Poor quality fasteners may not withstand being disconnected and reconnected.
- When working with a sharpening machine, it is necessary to set low speed. High rotation speed will damage the cutting edge.
- After purchasing a tool, you need to remember its angle. It must be adhered to during sharpening.
- If you need to sharpen professional manicure tools, it is advisable to use the services of professionals. Carrying out the procedure yourself requires practical experience. To do this, you can practice on old instruments.
- Wear safety glasses when operating the sharpening machine.
- Bars less than 8000 grit are used to smooth out serious damage and chips. If there are no such problems, you should not choose stones less than 8000 grit.
- Do not forget about regular lubrication of moving elements with oil (machine oil, vegetable oil).
- Store tools in a dry case without access to moisture. Constant moisture will cause rust to form.
- After work, clean tweezers, scissors, files, tweezers from dirt and debris.
- A simple option to restore the sharpness of nail scissors is to cut the foil. The sharper the blades are needed, the more cuts required.
It is strictly forbidden to change the angle of the cutting edges, which was made by the manufacturer.
Sharpening manicure instruments is a responsible procedure that will help restore sharpness and perform work more efficiently.
However, in order not to permanently spoil the cutting edges, it is necessary to take into account a number of nuances and recommendations of professionals. If it is not possible to spend enough time for sharpening, you need to contact a specialized workshop. Repair and sharpening of manicure scissors and nippers
Principles of sharpening manicure instruments Link to main publication
Source: https://metalloy.ru/obrabotka/zatochka/manikyurnyh-instrumentov
