Sharpening manicure tools at home - Fashion Magazine
Sharpening manicure tools is a very important process. This is especially true for those tools that have just been purchased, because it is not a fact that tweezers, nippers or other manicure tools were carefully sharpened at the manufacturer’s factory.
Sharpening is also necessary for those manicure accessories that are used for a long time, since over time they can wear down and become dull. That's why at one point you may need to sharpen your manicure tools.
What types of sharpening exist?
Today there are only two ways to sharpen manicure tools:
Of course, hand sharpening is much better than factory sharpening or, as it is also called, container sharpening.
Factory-sharpened tools, as a rule, do not last a long time, and their blades do not cut along their entire length, since they are sharpened differently and are not very sharp.
But even if, when purchasing manicure tools that are factory sharpened, they suddenly turn out to be very sharp, this does not mean at all that they will remain so after several times of use.
Manual sharpening of manicure tools is a real art that requires diligent attention and, of course, perseverance, as well as confident movements. The manual sharpening process takes place using a special sharpener, which is equipped with a diamond-coated metal wheel.
Sharpening tools at home
Most modern women do their own manicure at home, because going to the salon takes quite a lot of time.
But what if, during a manicure, your favorite scissors or the nippers began to painfully pull on the skin? Of course, you can take them to a special workshop and there they will be restored to their former sharpness, but you can sharpen your favorite manicure accessories at home. To do this, you need to have a few things on hand:
- A whetstone used to sharpen kitchen knives;
- Sandpaper;
- Foil
- Napkin;
You can sharpen manicure tools quite quickly. You just need to take a sharpener for kitchen knives, open the tongs, wire cutters or scissors as wide as possible and carefully begin sharpening them. The main rule when sharpening is smoothness; you should not make very sudden movements.
Another simple way to sharpen manicure tools at home is with sandpaper. For greater convenience, you can attach it with tape to a nail file or a straight surface. To begin with, attach coarse sandpaper with a grain size of 500-600 and grind the chamfers of the cutting surfaces with it, then attach a finer one (size 1000-1500) and bring the surface to a perfectly smooth surface.
The easiest way to sharpen manicure tools is to take foil, fold it in several layers, and start cutting strips; the more strips we cut, the better the sharpening of the tool will be.
It doesn’t matter how the tools were sharpened, the main thing after this procedure is to clean the blades from dust and plaque and treat them with warm water.
Sharpening level
Making manicure accessories sharp may not be so difficult; it is more difficult to know the degree of sharpening.
To check it, you need to take a small piece of polyethylene, preferably thin, and test the tool on it. The main thing is not to put too much pressure on it, but to make smooth and soft movements.
If the tool is well sharpened, it will leave a smooth mark behind it, without any torn edges.
Equipment for professional sharpening
Any master who constantly sharpens manicure tools has special equipment for this. As a rule, only two types of machines are used in this matter:
The easiest way to sharpen is on a laser machine, but it also has its drawbacks. With such sharpening, the risk of wear on the blades of the tool increases. During operation, the laser beam greatly removes the thickness of the metal and therefore it becomes brittle.
Sharpening on a mechanical machine is a little more difficult than on the previous one, but, nevertheless, it maintains the strength of the tool and does not shorten its service life.
Manicure is very important for most people and therefore should be taken very seriously. First of all, you should select only high-quality tools for working with nails and take their choice seriously.
After all, the health of your nails and skin depends on what tools you use to perform your manicure. That is why it is best to purchase only professional accessories or tools from well-known brands.
Well, of course, you need to pay attention to the sharpening of tools in order to ensure comfortable and convenient work.
Source: https://jurnalomode.ru/zatochka-instrumentov-dlya-manikyura-v-domashnix-usloviyax.html
Sharpening manicure tools: general information
Sharpening manicure tools, especially new ones, or “blanks” as masters call them, is an extremely necessary thing.
This can be explained by the fact that the sharpening of manicure tweezers, nippers or other equipment in a factory environment is not always of high quality and suitable for work. Only expensive instruments such as Olton and Henckels can be used immediately after purchase.
But even they, after a while, become dull and begin to “tear off” instead of “cutting”. Therefore, sooner or later any tool must be sharpened.
What is “Manual sharpening of manicure instruments”? In most cases, “hand sharpening” means sharpening of manicure tools by a master. It is often also called “individual”. This means that a person comes with his equipment to a master sharpener and the tools are sharpened in the way he needs, and the work itself is done with a diamond stone under a microscope.
Professional sharpening of manicure instruments is the processing of equipment by a master working in a specialized company or enterprise. Such people, as a rule, take special courses in sharpening tools and have quite a lot of work experience. The sharpening itself in such cases is carried out using special machines and appropriate diamond wheels.
If you contact a highly qualified specialist, the sharpening of nail clippers or tweezers will be performed without defects, and the service life will be at least six months even under the heaviest loads. In both the first and second cases, craftsmen can use various machines and tools, but the quality depends little on this.
Proper sharpening always gives a positive result, regardless of the equipment. It is also worth remembering that only specialists know how to sharpen nail clippers or tweezers. You should not sharpen tools yourself at home: this can lead to irreparable damage to the blades or subsequent injury to the master or client.
Sharpening tools for manicure: what needs to be sharpened and how to check the quality of sharpening
Most often, sharpening requires nail and cuticle nippers, tweezers, and manicure scissors. Some craftsmen also send pushers for sharpening. Despite the fact that only a master knows how to sharpen nail clippers, scissors, etc. That's right, anyone can check the quality of his work.
There are certain techniques for this, depending on the type of instrument:
- Cuticle nippers and scissors. To determine the degree of their sharpness, special “T-shirts” are used - small plastic bags or sheets of the same fabric. As a rule, such “shirts” are available in all specialized stores and sharpening specialists. The essence of the test is to pull the edge of the polyethylene between your fingers and try to cut it. If the sharpening of manicure tools is carried out efficiently, a cut with smooth, clear edges will remain on the “T-shirt”. If the polyethylene is “chewed”, feel free to return the tool to the master for revision; the sharpening was carried out incorrectly. Some craftsmen also use wet paper, sketchbook paper or toilet paper for this purpose, but polyethylene is the most informative in this regard.
- Tools for working with the nail plate. The essence of checking the sharpness of nail clippers or scissors is similar to cuticle tools, but in this case a different material is used. Most often, insulating tape or thick paper (for example, printer paper) is used as the test material. The result should also correspond to the test on polyethylene - a clear cut without “torn” edges or “chewing”.
The frequency with which manicure tools are sharpened depends on many factors.
The quality of the craftsman's work . Everything is simple here - the better the sharpening of manicure tools, the longer they will remain sharp. With high-quality sharpening, the tool can remain in excellent condition for 10-12 months.
Working conditions . The service life of manicure tools directly depends on the amount of work they perform. Well-sharpened instruments, when used exclusively for personal use, can maintain their sharpness for more than 1.5 years, while in a popular beauty salon this period will not exceed 3-4 months.
The quality of the tools themselves . Higher quality tools can maintain their sharpness for a longer period of time compared to budget options, even with similar sharpening quality. The essence of this difference lies in the more wear-resistant alloy from which the tool is made, which can increase the service life by 2-4 months.
Terms of use and storage of tools . Craftsmen who use covers for their tools, regularly lubricate them, carry out timely disinfection and do not sharpen them at home, sharpen 1-3 months less often than their other colleagues.
What is the danger of a freshly sharpened tool? Tools that have just been in the hands of a master and have undergone high-quality sharpening are, as a rule, much sharper than they were before.
This must be taken into account when starting to work with them - they cut off the cuticle or nail plate more severely. With the slightest carelessness, this can lead to a deep cut or cutting off the nail too much.
You should also always follow safety precautions, as improper storage or carelessness can cause significant harm to yourself or others.
Sharpening manicure tools at home.
If there is an urgent need to quickly sharpen tools or there is no opportunity to contact a master sharpener, sharpening manicure tools can be done at home.
It is worth mentioning that this procedure is quite dangerous: both for the person doing the sharpening and for the tool itself. Also, you should not expect long-term or high-quality results - this is only a temporary, one-time solution.
Sharpening of nail clippers, manicure tweezers at home and by a qualified craftsman
To sharpen at home, you need to use a regular whetstone for sharpening kitchen knives. Next, take the dull tool, spread it as far as possible and sharpen it smoothly using a whetstone, avoiding sudden movements. You can also use sandpaper, but in this case it is difficult to achieve a more or less decent result. After sharpening, the tool must be treated with an antiseptic and wiped with a dry cloth.
How is manicure tools sharpened by a professional? Professionals, as a rule, perform two types of sharpening: manual (individual) and machine.
- Machine sharpening of manicure clippers and sharpening of manicure tweezers is carried out by a specialist using a special machine and attachments: a diamond and polishing wheel and a felt washer. With their help, the master sharpens the tool, aligns the edges of the blades and eliminates jagged edges. Machine sharpening is much faster than manual sharpening and eliminates the possibility of damaging the structure of the blades themselves. However, 1 tool can withstand from 8 to 12 sharpenings, depending on the initial dimensions of the “blank”.
- Sharpening manicure clippers and sharpening manicure tweezers “by hand” involves the work of a master using a diamond stone under a microscope, when every millimeter of the blade is sharpened. In this case, the quality of work is usually higher, but the professionalism of the craftsman plays a big role here. But there is always a risk of causing irreparable damage to the blades. Also, the speed of work completion directly depends on the work experience and skills of the master sharpener. The average tool can undergo 25-35 such sharpenings.
Source: http://NogtiPro.com/manikjur/zatochka-manikjurnyh-instrumentov/
How to sharpen wire cutters with your own hands. 5 MAIN FACTORS, without which nothing will work
5 main factors without which nothing will work
IMPORTANT NOTE:
1. It is shown more clearly and clearly in the video. Look it up.
2. This article is much more convenient to view from a computer than from a smartphone.
If you are interested in learning how to sharpen wire cutters as a business and a way to make money, then click the button to learn more about it.
Go to the Academy
How to sharpen wire cutters with your own hands
Here I will talk about 5 main factors that determine whether you succeed or not.
Today there are a huge number of videos on how wire cutters are sharpened. There is a description on various sites that make money from advertising and attracting traffic, and the quality of the information there is of very questionable quality. There is a lot of information on this matter, but it is still not clear how to sharpen it yourself.
I watched a lot of videos and didn’t see a description of the most important thing anywhere.
The very main thing on which it all depends .
What I have seen is that sharpeners often intentionally make this topic very difficult. They create mystery, like: “We sharpen on special machines” “This is our special paste” “This is our special something else” Everything is special and they have nothing simple.
But the truth is that the essence of sharpening wire cutters is very simple!
All sharpening of wire cutters comes down to:
to achieve the presence of 5 factors.
But before I talk about them, answer yourself one question.
So you want to learn how to sharpen wire cutters yourself at home.
Fine. The question is simple: “Why do you need this?”
That is, if you want to save money, you won’t be able to save money. You will waste time. It's also worth something. Put in the effort. You will need some equipment, expensive or inexpensive, but in any case you will need something.
Therefore, it makes more economic sense to give the wire cutters to someone who already knows how.
Give the wire cutters to a professional for sharpening.
Today, sharpening wire cutters costs about 300 rubles. Personally, our cost has not changed since 2009. For almost nine years. As we sharpened at this price, we continue to sharpen. It's available to anyone.
The only justified, in my opinion, reason why you should sharpen wire cutters at home is that there is not a single sharpening master in your city, region, country or planet.
If this is the case, and you are determined to learn this, then this article and video will allow you to learn the most important things. The basis. The basics.
5 factors that determine whether the nippers will cut or not are the basis of any technology for sharpening nippers .
That is, no matter what method of sharpening you use - whether on diamond wheels, or needle files, or any other abrasive things - they all come down to these five factors.
All methods, all sharpening technologies come down to consistently introducing 5 factors and, thereby, getting the cutters to perform their functions.
What is the purpose of wire cutters?
The answer seems obvious. The purpose of cuticle cutters is to cut the cuticle.
That is, they should cut the cuticle easily and effortlessly, without catching, pinching, biting or wringing. The person presses the handles of the cutters and the cuticle is cut. And this is the purpose of the existence of wire cutters.
What determines whether the nippers will cut or not?
It depends on having 5 factors which you get one after another. One by one. And as soon as they are all installed, the nippers will cut.
If you know WHAT you should get,
If you know WHY you should get it,
If you know HOW you should get it, then a little practice and everything will work out.
Use some kind of sharpening technology and practice.
1. The cutters should not rest
What this means is that ANYWHERE in the joint, in the rivet, or between the handles that prevents the cutter blade from closing. It's logical. If something gets in the way, the blades will not close and will not cut anything.
Inspect everything carefully and remove any obstacles on the machine or with a file.
2. The cutters should not dangle.
This means that there should be no play. There should be no movement of the blades relative to each other.
Backlash is one of the most common problems with wire cutters. And if the cutters are loose in the rivet, you won't be able to line up the cutting edges. The blades will constantly jump relative to each other and pinch and pinch the cuticle.
Using a core and a hammer, tighten the pressure on the two halves of the pliers so that they do not wobble.
3. The internal planes of the cutters must be smooth.
It is important! Do not allow any transitions on planes or undercuts!
If there is a break in the plane on the inner surface, then when further adjusting the cutting edges you will find that you cannot remove the hole and achieve proper closure.
Always ensure that the inside of the wire cutter blades are straight and on the same plane.
4. The convergence of the cutting edges must be correct.
The blades should close easily from tip to heel , with minimal clearance.
Any deviations from what is written above lead to a deterioration in the cutting quality of the nippers.
Wrong:
- converge from the tip to the heel, but you need to press hard on the handles so that the entire canvas shrinks;
- converge from the middle, then the tip and heel;
- begin to converge from the heel to the tip; The tip closes, then the heel and there remains a hole in the middle.
The nippers perform their function perfectly only when they close easily from tip to heel WITHOUT additional squeezing force.
5. There should be no burrs on the cutting edges.
A burr on the cutting edge will significantly degrade cutting quality.
When adjusting the clamp, a burr always remains on the cutting edge. If you do not remove it, the nippers will pinch and pull the cuticle. Soon the hangnail will bend or fall off, and the cutters will become dull again or a gap will appear. Therefore it must be completely removed.
At the end of sharpening, be sure to remove the burr using a polishing wheel.
If you have sharpened your pliers and ensured that all five of these factors are in place, then the pliers will cut.
If at least one of them is missed, then the cutters will cut poorly or will not cut at all.
If you have done everything, implemented all five factors, but the wire cutters are not cutting, then you should take a closer look to see if some of them are missing. That is, either they are stuck somewhere, or during the sharpening process they began to play a little somewhere, or you messed up the toe somewhere. Something will definitely happen.
And this is the essence of sharpening wire cutters.
And it all depends on whether the nippers will cut or not.
If you can ensure that the cutters do not rest, do not wobble, have a smooth internal plane, have the correct toe and no burrs, then your cutters will cut. And it doesn’t matter how you did it - on diamond wheels or with a file.
If you cannot achieve this, then, accordingly, it does not matter what equipment was used, even for 50 kopecks, even for a million euros.
Watch the video where all these points are presented more clearly.
watch the video
5 main factors without which nothing will work
author Alexey Novikov
share this on social networks
Source: https://Jecky.ru/blog/kak-zatochit-kusachki-svoimi-rukami-5-glavnyh-faktorov-bez-kotoryh-nichego-ne-poluchitsya
Sharpening manicure tools
Sooner or later, purchased manicure tools require sharpening. Depending on how the tools were sharpened from the very beginning depends on how long they will last for a manicure. Sharpening can be carried out six months or a year after purchase. But the most important thing is that you can do this procedure yourself.
Why can't you use blunt instruments?
Almost every week a girl who monitors the condition of her nails gets a manicure. And in order for it to be successful and give your nails a beautiful look, you need to ensure that your manicure tools are sharp. After all, not all girls know that using blunt instruments can damage your nails and get hurt.
For example, using dull cuticle cutters can cause you to cut yourself or tear the cuticle instead of cutting it. Using dull scissors, the nail plate can be damaged, and then the nails will not grow well.
In order to cut the nail and not pull it, the scissors must be sharp and even.
Before you go to a master to sharpen your tools, you can try to do it yourself. Of course, the process is quite complicated and will take a lot of time, but the result is worth it.
The sharpening process consists of several stages. For example, before you start sharpening, you need to check your scissors; they may not work well not because they have become dull, but for some other reason. Therefore, you first need to check their suitability. Very often, scissors do not work well because of the bolt that holds the two halves of the blades, so it needs to be either tightened or loosened. If the problem persists, then you can proceed to sharpening.
You can check the sharpness of the wire cutters using a plastic bag. To do this, you need to run the cutters over the bag and see how the cutting process goes. Sharp cutters do not tear the bag, but cut smoothly and quickly. If the bag breaks, then the cutters need to be sharpened. You can sharpen the wire cutters with your own hands, but you need to do it carefully and correctly.
For home sharpening, you need to purchase a special stone, on both sides of which there are different coatings. In order to proceed to sharpening, the block or stone must be placed on a cloth and moistened with water. Scissors need to be disassembled if they are connected by a screw. It is necessary to determine in which direction the scissors were sharpened at the factory, and it is also necessary to sharpen the scissors at home.
The scissors are positioned with the blade facing away from you, and the base of the scissors should be parallel to the block. The blade should be moved to the side, not sharply, but with smooth movements. And with such movements you need to move the blade until it becomes sharp. Once the blades are sharpened on the coarse-grained side of the stone, you need to turn them over and go over the fine-grained side. When the process is completed, you can assemble the scissors and check their sharpness.
This way you can sharpen cutting tools or household scissors. You can also sharpen nail scissors that have straight blades. If the scissors have a curve and are intended for cuticles, you cannot sharpen them yourself.
Sharpening manicure tools: user reviews
Uzbek:
“I decided to sharpen my wire cutters at home and didn’t watch any video tips. With the help of his auxiliary tools, he himself came up with a sharpening method. There was a gap on the cutters that was visible only with a magnifying glass, and it disappeared after light pressure. For sharpening I used sandpaper, having previously glued it to the file. First I sanded the chamfers, changing the paper coating, and then started working on the back surface of the blades.
The gap did not change, but the cutters did not want to cut the package. Now I'm looking for other sharpening options. And my experience has suggested that you don’t need to do everything at your own discretion, it’s better to listen to the professionals.”
Zeta:
“I have been looking for a long time for a master who can sharpen my nail scissors, and as it turns out, this is a problem. Many girls wrote reviews on sites, and I realized that I was not the only one. As it turned out, there is not a single master who can do his job well. I took the scissors to different nail technicians several times, and after a week they still started tearing the nail.
I decided to find a way to sharpen them myself and found advice about sharpening with a fine-grain whetstone. I bought this block at the market and started sharpening, there were a lot of nuances, you need to constantly monitor the tilt of the scissors, move the scissors correctly along the surface of the block, otherwise they can simply be ruined.
I was in no hurry, I did everything according to example, and as a result, I’ve been using scissors for two whole months; by the way, they have straight blades, so it was easy to sharpen them. I took my thin cuticle scissors to a master, and he sharpened them well. It seems to me that this is the last master in our city, because I bypassed everyone.
It was at this stage that I began to wonder, is there really not a single craftsman who sharpens scissors using a whetstone? But most likely, such people want money, so it’s profitable for them to sharpen their scissors poorly so that clients come to them every week and pay again.”
Source: https://webdiana.ru/krasota/nogotki/9179-zatochka-manikyurnogo-instrumenta.html
How to sharpen a manicure tool
Sharpening manicure tools is a very important process. This is especially true for those tools that have just been purchased, because it is not a fact that tweezers, nippers or other manicure tools were carefully sharpened at the manufacturer’s factory.
Sharpening is also necessary for those manicure accessories that are used for a long time, since over time they can wear down and become dull. That's why at one point you may need to sharpen your manicure tools.
