How and with what to clean a gold chain

How to quickly clean a gold chain from dirt at home

How and with what to clean a gold chain

Many people have a gold chain.

This is a beautiful piece of jewelry that requires regular care and cleaning.

Because the metal becomes cloudy over time, it can turn black and you need to fight this in order to restore the shine to the jewelry.

There are various folk methods for this, which we will consider.

How to clean a gold chain at home

If your gold jewelry has become more cloudy and has lost its shine, then a soap solution will help restore its presentable appearance.

To touch all areas in the chain, you need to use a toothbrush. We wear gold chains all the time, we take them off extremely rarely, and the gold is covered with a layer of darkening.

Useful tips

Here are some basic tips on how to best clean your jewelry of any kind.

If you are cleaning a gold chain with a paste, use a cotton pad or soft suede or flannel cloth.

After cleaning the gold chain, you can rinse it with plain water, and it is better to dry it with a soft cloth.

If you clean gold jewelry in a bath with any composition, it is better to lay foil down. When boiling, you also need to put a scarf or foil on the bottom of the container.

It is better to use a soap solution without chemical additives. Pay special attention to cleaning jewelry with turquoise and pearls.

It is better not to clean gold chains with precious stones using aggressive methods to avoid darkening of the stones.

To polish gold jewelry, you can take a spoonful of laundry soap, which we have previously rubbed, mix with crushed chalk and a tablespoon of water. This mixture should be applied to a cotton pad and used to treat the gold chain.

How to clean dirt from a gold chain using salt and soda

Using a saline solution, you can thoroughly clean gold chains and return them to their original appearance, shine and beauty.

Let's look at how you can make a saline solution for cleaning jewelry.

  1. Mix salt from large crystals with two teaspoons of lemon juice until mushy..Take the mixture with your hands and rub the chain well for 5 minutes.

    After this, you need to rinse the product with water and dry it. Your jewelry will shine like before.

  2. In a bowl, mix one tablespoon each of salt, baking soda and dishwashing liquid.You need to put foil on the bottom of the container, a gold chain on top and put a mushy mass on it, pour a glass of water on top.

    After 30 minutes, rinse the jewelry and dry it.

  3. Mix two tablespoons of ammonia with one teaspoon of soda.
    You need to put a gold chain in this mixture, cover the container and leave for a day.
    After this, we take out the jewelry and wipe it with a cloth with a saline solution and vegetable oil on top.

How to Clean a Gold Chain Using Food Ingredients

Not only chemical compounds, but also food aids can help us clean gold jewelry.

Let's look at the main ones.

Take mustard powder.
Rub it into the gold chain using a cotton pad. After rinsing with plain water, the jewelry will shine.

Everyone has onions at home.
You need to grate it on a fine grater, add 2 tablespoons of warm water and rub the gold chain with this solution. You can leave the jewelry in the solution for three hours and then rinse with water as usual.

Dilute one packet of citric acid in 100 ml of warm water.
Place the gold chain there and leave for 40 minutes. If citric acid is not available, you can use lemon or orange juice.

Drinks like Pepsi and Coca-Cola can also help us get rid of plaque and dirt from our gold chain.

Grated potatoes will also come to our aid when cleaning gold chains.
Leave the decoration in the potato pulp for two hours, then rinse and dry.

Another easy way to clean gold chains is to add two tablespoons of sugar to a glass of water at room temperature.
When the sugar is completely dissolved in water, leave the gold jewelry there for 10 hours.
After this, rinse and dry with a soft cloth as usual.

How to clean gold using soap solution

The main and easiest way to clean gold jewelry is soap solution. And even a simple soap solution can be used in different ways. Let's consider several options.

Option 1

Place in a bowl:

  1. one tablespoon of oxygen bleach,
  2. a spoonful of dishwashing liquid and
  3. half a glass of very warm water.

We put a gold chain there and leave it for about an hour. After this, you need to rinse and wipe until shiny.

Option 2

Pour 200 ml of hot water into a container and add a grated small piece of laundry soap, put a gold chain in the solution and leave for three hours.

Option 3

A soap solution can be made in this way. Add a spoonful of liquid soap and a little laundry soap to 300 ml of warm water.

Gold jewelry should be left to soak in the solution, and then the chain should be cleaned with a brush. Then use a cotton pad soaked in cognac to wipe the chain and rinse.

Cleaning gold jewelry by boiling

In order to remove contamination from gold items without using chemicals, you can resort to a method such as boiling.

To do this, you need to prepare a pan or other container made of aluminum, ceramics or enamel, a handkerchief, soap, hydrogen peroxide, vinegar.

With detergent

One of the easiest ways to clean gold chains is:

  1. place a piece of cloth on the bottom of the pan,
  2. put gold items on it and pour water.
  3. Add one tablespoon of any dishwashing liquid there,
  4. put on the stove for five minutes.

At the end of the procedure, rinse, dry and rub the jewelry as usual.

With soap and peroxide

Pour 100 ml of water into a ceramic pan and put gold jewelry in it, add a spoonful of liquid soap and bring to a boil.

After this, add one spoon of hydrogen peroxide and continue to boil for another 5 minutes, remove from the stove and wash the gold.

With soda and vinegar

Pour 100 ml of water into a container and add three teaspoons of soda, put a gold chain there and bring the liquid to a boil. After this, you need to add two more tablespoons of vinegar and boil for another three minutes. Then the jewelry should be washed and wiped with a cloth.

How can you clean a gold chain using chemical methods?

To clean gold jewelry from dirt and plaque, hydrogen peroxide and ammonia will come to our aid.

Various combinations and solutions can be used.

Take one glass of water, add one teaspoon of liquid soap, 25 ml of peroxide and one teaspoon of ammonia .
We put the gold chain there for 20 minutes, after which we wash and dry the jewelry. The gold item will look like new.

You need to pour 100 ml of hydrogen peroxide and 50 ml of ammonia into an enamel container, put gold jewelry into the solution and leave for 12 hours.
Afterwards, wash and dry as usual with a soft cloth.

You can also use toothpaste to clean gold jewelry, but without the whitening effect.
Children's toothpaste will do. Using a brush, rub the gold chain and rinse with water, let it dry, laying the product on a handkerchief.

Another easy option is to clean a gold chain using nine tablespoons of a little warm water and one spoon of ammonia.
The gold jewelry should be left in the solution for two hours, then rinsed as usual and wiped with a dry, clean cloth.

You can use ammonia to clean gold jewelry, so you need to pour 35 ml of ammonia into a container and put the chain in it, closing the lid.
After two to four hours, depending on the degree of contamination of the gold, remove the cleaned jewelry and rinse and dry properly.

Place foil on the bottom of the container and gold jewelry on it. Sprinkle a teaspoon of soda, 40 ml of ammonia and one teaspoon of salt on top. Leave for half an hour, after you see the effect of the cleansing process, rinse with water and wipe with a soft cloth until shiny.

You can also use Vaseline with crushed chalk, ammonia and water to clean gold jewelry .
Make a thick solution from all the ingredients and put a gold chain in it for thirty to forty minutes. After the procedure, you need to rinse and dry your gold jewelry.

To add shine and clean gold jewelry, take equal parts of Vaseline, crushed chalk, grated soap and warm water and mix everything until mushy.
To treat gold jewelry, take a suede cloth and wipe the chain with the mixture. After this, rinse and dry the product.

All these recipes are good to use for cleaning gold jewelry without stones.

Unusual methods for cleaning gold jewelry

Are there non-standard methods for making solutions and mixtures for purifying gold from contaminants? Yes, such methods exist. They are unconventional, but also effective.

If you have old unnecessary lipstick , then you can use it. To do this, use it to rub the chain with a cotton pad and rub it, the plaque will come off.

Lens cleaning solution is also quite suitable for cleaning gold jewelry ; it will help remove dark deposits and dirt between the links of the chain.

There is vinegar in every home ; it cleans gold jewelry well; you need to leave the chain in a container with vinegar for one day.

We've looked at common methods on how to clean gold chains and jewelry at home using products you always have at home, without expensive ingredients.

After all, over time, gold jewelry loses its shine and is covered with a dark coating. You can choose the most comfortable and convenient method for you.

Source: https://kakchistim.ru/uhod-za-veshchami/dragocennosti/kak-pochistit-zolotuyu-cepochku.html

How to clean a gold chain at home quickly and effectively

How and with what to clean a gold chain

A gold chain is one of the most popular jewelry. Like all jewelry, it can lose its appearance over time, especially with frequent or daily wear, and therefore requires quality care.

Do I need to clean gold chains?

Gold is an inactive metal that does not enter into oxidation reactions, which allows it not to darken. But pure metal can only be found in the form of ingots or nuggets. Alloys of gold with other metals are used in jewelry. The purity of gold and, accordingly, the price, as well as the tendency of the chain to become contaminated, depend on the proportion and type of impurity in the alloy.

Homemade Cleaning Products

There are several ways to clean a gold chain, which should be chosen depending on the degree and type of contamination.

Soap

One of the simplest and most gentle ways to clean jewelry is with soapy water. You can prepare it by grating a little bar soap or stirring a few drops of liquid soap in water. The chain is soaked in the solution for 7-10 minutes, and then rinsed with clean water. Before rinsing, the jewelry can be gently rubbed with a soft brush or brush to clean the most problematic areas.

Be sure to blot the product with a soft, lint-free cloth, and then leave it until completely dry.

Salt

Salt has excellent cleansing abilities. You can use this tool in two ways.

Brine

Dissolve 4 tablespoons of table salt in a glass of hot water. When the solution has cooled slightly, lower the chain into it and leave for 10-12 hours. Then rinse the jewelry in running water and dry. It is important to remove any excess brine from all links to prevent the salt from damaging the metal.

Salt with lemon juice

This method is good because it combines the cleansing properties of two substances at once - salt and natural citric acid.

Finely ground table salt should be mixed with fresh lemon juice in a ratio of one to two to form a “scrub.” The mixture should be applied to the surface of the chain and spread with a soft cloth. Make sure that grains of salt do not scratch the jewelry, since gold is a rather soft metal. Then rinse the product to remove any remaining dirt in running water and dry.

Soda

Soda is a cleaning agent known to all housewives. It helps to cope with a variety of contaminants. Darkening on gold is no exception.

This method of cleaning jewelry is very similar to the previous one. Mix a little boiled water with soda to make a thick paste. Apply it to the entire length of the chain and leave for 4-5 hours. This way the chemical reaction will complete, removing all the darkening.

After cleaning, rinse the product in running water and dry.

Ammonia

Ammonia is an effective remedy in the fight against blackness on gold jewelry. But when using it, you need to take into account that ammonia is very chemically active, so long-term exposure to low-grade gold jewelry can be harmful.

Higher quality jewelry should simply be placed in 30 ml of ammonia solution (25%) and left for 4-5 hours. Then rinse in warm running water and dry. Ammonia not only removes darkening, but at the same time restores the shine of the precious metal.

Ammonia

Ammonia is a softer ammonia solution, no more than 10%. You can put your chain in it for several hours to remove dark spots and give your jewelry extra shine. Various solutions are also made with ammonia to enhance its chemical properties.

With hydrogen peroxide

To one teaspoon of ammonia, add three tablespoons of peroxide and half a teaspoon of washing powder. Stir all this in half a glass of boiled water, then put your decoration there. After 1-2 hours, the chain must be removed from the mixture; If necessary, additionally scrub the areas of greatest contamination with a soft brush. Then rinse the product and let it dry.

With soda

Mix baking soda and ammonia in a 1:2 ratio, cover the chain with the mixture, leave for 10-12 hours. Then rinse it under running water, leaving it to dry completely. This method combines the strong cleaning properties of soda and ammonia, guaranteeing complete removal of tarnish on gold.

Lemon

Lemon has long been known for its cleansing properties. Its main active ingredient, citric acid, copes with dirt, as well as slight darkening on gold, without damaging it.

To clean the chain, squeeze a little juice from the lemon, soak a piece of soft cloth in it, and rub the jewelry. Leave it for half an hour, then rinse with water. If you don't have lemon in the house, you can use citric acid. Make a solution and put the chain there for half an hour. The effect will be the same as fresh lemon juice.

Table vinegar

9% vinegar works in a similar way. It contains acetic acid, due to which a chemical reaction occurs to purify gold.

THIS IS INTERESTING:  How to make rivets on leather

A little vinegar is poured into a ceramic bowl and the chain is soaked in it. Gold of a higher standard can be left for a day, but low-grade gold should not be kept for more than three to four hours. After such cleaning, the chain must be rinsed and dried.

Foil

Foil itself is not a cleaning agent, but it enhances the effect of the solutions. To do this, line the bottom of the container with foil, shiny side up. Then a solution of soda in hot water is poured into the container, and the decoration is placed there for at least 12 hours.

Dishwashing liquid

Household dishwashing detergents perfectly clean jewelry from dirt that inevitably appears with regular wear. To do this, you need to make a soap solution and soak the jewelry in it for several hours, and then slightly rub the most problematic areas with a brush.

For faster results, you can boil the decoration in the same solution. Add 1-2 tablespoons of detergent to half a glass of water. Boil the chain in this mixture for 5-7 minutes.

Toothpaste

This method is considered the most suitable for removing iodine stains from gold jewelry. To do this, squeeze a little paste onto your palm, cover the entire chain with it, rubbing the stains with a soft brush. Toothpaste will gently remove dirt without causing any harm to the product.

Beer and egg white

One of the “grandmother’s” methods of purifying gold is a mixture of beer and egg white. It does a good job of removing small stains from the product while adding shine. To do this, mix half a glass of beer with one whipped egg white. Using a soft cloth, rub the chain with the mixture and rinse in warm water.

Jewelry cosmetics and special devices

If you are afraid of ruining your jewelry with improvised means, special cosmetics used by professional jewelers will come to your aid. You can purchase such products in jewelry stores and online.

There are three main types of caring cosmetics:

  1. Solutions that remove traces of oxidation in minutes.
  2. Wipes, dry or wet, polish, remove dirt, and do not clog chain links.
  3. A paste that removes significant darkening and preserves the shine of jewelry for a long time.

When purchasing any jewelry cosmetics, be careful, read the instructions for use and follow safety precautions.

There are also specialized devices that clean jewelry with ultrasound. Working at a certain frequency, such a device removes the most difficult to reach contaminants. This method is quite convenient, since such an ultrasonic bath will only take 15 minutes.

Mechanical cleaning

The mechanical cleaning method, as a rule, involves significant physical impact, and you should try to avoid it when cleaning chains. Any pressure or tension may cause links to become damaged or break.

Polishing with a soft, dry cloth is one of the few suitable mechanical cleaning options, but it may not be effective if it is heavily soiled.

Energy cleansing

According to esotericists, gold is a metal that tends to take on the energy and mood of the owner. Therefore, jewelry that you are used to wearing every day needs to be cleaned of negativity at least once a month.

It is believed that there are three main “helpers” for energy cleansing: fire, water and sunlight. The candle flame over which the jewelry is held will remove all accumulated negative emotions from gold with its calm warmth.

You can hold the jewelry under clean running water, which you need to collect in a bowl, and then splash it on the ground. Sunlight cleanses of negativity, charges first the decoration and then the owner with its light. It's up to you which method to choose.

Although there is no scientific evidence that such energy cleansing is effective, simple self-hypnosis often works.

How to remove heavy stains

Heavy contaminants are removed using the most chemically active substances: ammonia, hydrogen peroxide, soda. The proportions of the mixtures are indicated above. In particularly difficult cases, it is worth boiling the jewelry, but please note that these methods are the most severe, which means they are not suitable for all types of jewelry.

How to restore shine at home

Sometimes it happens that after cleaning a gold chain still remains dull and looks unattractive. Some available remedies will help you regain your former glow.

Mechanical polishing with soft felt is a good option if you need to quickly polish a small chain. If you have a little more time, mustard powder will help. You need to pour it into a small piece of soft cloth, rub the dry chain, and then remove the excess using running water. The mustard is soft enough not to cause any scratches to the decoration.

How to remove hair from a chain

Hair in chain links is a common problem that can be difficult to deal with. The weaves of many chains do not allow the hairs to be untangled and the links removed. In this case, fire will help you. Gently burn the chain in a candle flame until all hair is completely removed. Then rinse the product in running water.

This method is imperfect, since you can “overdo it” and get stains of burning and soot on the gold. In this case, do not despair: wipe the decoration with lemon juice or citric acid solution, and then rinse and dry.

White gold

White gold looks very elegant because the alloy contains additions of silver, nickel or palladium sputtering. But this means that such jewelry is quite soft. It is better to clean them using soft mixtures. Here your helpers are ammonia and peroxide in a ratio of 1:2. Keep the chain in this mixture for half an hour, and then rinse it thoroughly.

Jewelry with stones

Jewelry with stones is also very capricious. It is contraindicated to boil them, soak them in strong reagents, leave them in direct sunlight, or rub them with abrasives. Many stones, especially semi-precious ones, are very soft and susceptible to cracks and scratches.

If your jewelry is inlaid with stones, it is better to use the mildest folk methods (for example, soap solution) or specialized products.

Chains with matte surface

Mechanical cleaning and polishing are contraindicated for any matte jewelry. If plaque has formed on such a chain, choose one of the dry cleaning methods depending on the degree of contamination. For example, using ammonia solution or lemon juice.

Pollution prevention

Simple rules for caring for gold will help you maintain the shine of your new jewelry for a long time:

  1. Avoid any contact of the chain with detergents and household cleaning products. To do this, remove the gold when you clean.
  2. Take off the chain when you go to the shower or bathhouse. It’s worth highlighting a visit to the pool: if you’re lucky, you won’t lose your decoration, but the chlorine that disinfects the water will still quickly ruin its appearance.
  3. Avoid contact of precious metals with skincare products. Peels, creams and masks contain many active substances that can react with impurities in the alloy.
  4. Remove jewelry when exercising. This is required not only by safety precautions: sweat and sebum gradually clog the links, leading to premature oxidation.
  5. Pay special attention to the rules for storing jewelry. Gold should be stored away from sunlight and dust. To do this, it is better to put each decoration in a tightly closed box.

Source: https://JLady.ru/domashnee-xozyajstvo/kak-pochistit-zolotuyu-tsepochku-doma-bystro-i-effektivno.html

፠ How to clean a gold chain: 8 ways at home, folk remedies

How and with what to clean a gold chain

Weaving a gold chain can be very different - from the simplest to the complex Arabic or Bismarck. It is not always the more complex the weaving, the more beautiful it is. The choice of a gold chain depends on tastes, preferences and financial capabilities. But the more complex such bindings are, the more dirt gets clogged up in them.

If you want to restore the shine and original appearance of the product again, then you just need to clean the gold chain. To understand exactly how and what to clean gold chains with, let’s figure out what kind of gold is used in the jewelry.

Features of gold jewelry

585 yellow gold, the most common today, loved by jewelers and buyers. Consists of 585 parts of actual gold. The rest is copper and silver. Platinum is added to white gold. All these additives make gold stronger, but do not protect against scratches.

Gold is not afraid of chemical reagents. It does not react with alkalis or acids and dissolves only in aqua regia. Does this mean you can use chemicals to clean it? Advice - not worth it. There are many reliable ways to clean a gold chain and make it shine again without using harsh products.

Eight easy ways

There are many ways to clean a gold chain at home and more. They can be used to not only clean a gold item of dirt, but also to give it its original shine.

Method one - gold cosmetics

Such cosmetics include special care kits for gold jewelry. It must have a special brush. With its help, you can clean a gold chain in difficult places without leaving scratches. What do we mean by difficult and difficult to reach places? The joints of links in weaving or the fastening of a lock - most often this is where dust accumulates.

Method two - soap, toothpick and toothbrush

You can arm yourself with a wooden toothpick and slowly remove dirt from the gold chain. But first soak your product in warm water and soap.

After an hour or two, home remedies will do their job. You can take it out, wipe it with a flannel or simply dry it with a paper towel. A soft, old toothbrush is suitable for cleaning. Wet it in a soapy solution and carefully clean all dirty areas. But those places that the brush cannot reach can be cleaned with a wooden toothpick.

After cleaning the gold chain from dirt with soap, rinse it in warm water and wipe dry. Then it can be polished.

Method three - ammonia

Using an ammonia solution, you can not only clean the chain, but also give it shine without makeup and additional effort.

Recipe:

  • 1 teaspoon of ammonia or 10% ammonia;
  • 1 tablespoon of washing powder;
  • 1 glass of well warm water.

Mix all this and leave the gold chain for up to 3 hours.

This recipe has one drawback - the smell. We recommend wearing a mask and kneading in a well-ventilated area. For example, this can be done near an open window or on an open balcony.

After three hours, rinse the gold chain with running water and wipe dry. If there is no deep dirt in the lock area or between the chain links, then you're done. If you're left, pick up a toothpick. If you're not satisfied with the shine, we polish it.

Ammonia quickly purifies gold. You can simply pour hot water into a saucepan, add ammonia to it, place a gold chain in the solution and close the lid. After a few hours, the chain should shine.

The composition should be 1 to 10. For one portion of ammonia, add 10 portions of water.

Method four - toothpaste or powder

Tooth powder not only cleans teeth, but also polishes many household items to a shine. The gold just shines from it. But here it is necessary to take into account that such funds should not have any foreign inclusions. Otherwise, the metal can be easily damaged.

The same point applies to toothpaste. For example, whitening toothpaste is dangerous not only because it destroys tooth enamel, but also scratches gold with small particles. Choose a homogeneous paste, without additional unnecessary effects.

Method five - chalk

We have already rubbed chalk between our fingers on the gold ring. It is unlikely that this method of cleaning the house will help clean a gold chain, but it will definitely add shine. We believe that it is better to attribute it to polishing gold.

Method six - vinegar

There are two options - make a vinegar solution and soak the chain for a while. And the second is to wrap the product with gauze soaked in a 9% vinegar solution. It all depends on the degree of pollution.

Method seven – salt and lemon juice

A) For this option for cleaning gold at home, coarse table salt is suitable. Prepare porridge from salt and a couple of tablespoons of citrus juice. It is believed that not only lemon juice, but also orange juice is suitable.

Rub the gold jewelry with the product until it shines. Be careful not to let the salt crystals scratch the thin metal.

B) Mix a spoonful of salt, soda and dish washing solution in equal proportions. Fill with hot water and place the product in the prepared container.

But there is one small nuance here - you must put foil on the bottom of the dish!

Method eight - for those who are bored

Beer and egg white. We have not tested this gold chain cleaner at home, but many bloggers recommend it. Whip the mixture with a whisk. The chain is immersed in this solution for half an hour, then washed and rubbed with flannel.

Grandmother's methods for cleaning a gold chain

Mustard powder remains a panacea for many grandmothers. Some people use it to clean and wash dishes, windows, and crystal. And there is a grain of truth in this. This product copes well with grease stains and adds shine to any product.

Onion juice. If you are not confused by the fact that you need to get juice from the onion, which is rubbed into the chain, then the method is very simple and original. By the way, it gives effect quite quickly. Just don’t forget to rinse your chain after the onion paste, otherwise the smell will haunt not only you, but also those around you.

There are also non-standard cleaning methods

At home, some recommend using lipstick for cleaning. Our experiments have proven that this method is a myth. Lipstick adds shine to the product, but it is just grease that remains on the gold for a long time and does not wash off using conventional methods.

In addition, wearing a greasy chain around your neck will not only stain your clothes. Dust will quickly stick to the grease.

You can use Goya paste. It comes in a variety of colors and the color depends on the particle size. We recommend using Goya's green paste to clean your gold chain at home. The paste both cleans and gives shine to the product.

If you are a lover of gold jewelry, then buy such a pencil - it will last for a long time, and you will not have to figure out ways to clean a gold chain at home.

Going to the jeweler

Some gold items should not be cleaned at home. We are talking about those chains that have a completely non-standard weave or are expensive due to their weight and exclusivity.

It is better to take such products to a jeweler. The master will clean it with ultrasound and give it shine using special cosmetics.

How can you rub gold until it shines if you are not impressed with the results?

First of all, it is worth remembering that gold must be cleaned very carefully, without leaving scratches or denting it when cleaning.

Gold chains can be hollow. These products look the same as the full ones, only they weigh half as much. It is machine woven and is very easy to tear and wrinkle. To give it shine, you will need:

  1. soft flannel or other fabric with fine but very dense pile. You should not use coarse fabrics such as linen for this;
  2. chalk powder if you didn't use it for cleaning. If you cleaned gold with chalk, then it will still shine;
  3. Goya paste or special jewelry paste.
THIS IS INTERESTING:  How to properly sharpen scissors with a whetstone

We wipe the gold jewelry with flannel, trying not to leave threads in the links of the chain and not to crush it. The decoration will shine. In addition, using chalk, which is rubbed between your fingers, you can remove minor scratches from the product.

Some tips on how to keep gold clean and shiny without cleaning

A gold chain is a piece of jewelry that we wear all the time. Therefore, its contaminants can become:

  • Chlorine in water. Don't forget to take off the chain when you go into the pool. Chlorine, which is used to treat pool water, and other disinfectant solutions, is unlikely to have a good effect on the appearance of gold.
  • Summer, heat, dust, sweat. It is these four components that merge together that create the very dirt that you will then have to clean. Based on this, if you are going to jog, it is better to remove the chain.
  • Winter clothes. Crew neck sweaters, items made of down or fabric with long pile - all this can get stuck among the links and not only stain the chain, but also break it.
  • Long hair has the ability to get caught in knots. It is better to tie them up, thereby revealing the neck line, decorated with a gold chain.

When should you wear a gold chain if it gets dirty in the summer and breaks in the winter? In any season. Just try to take care of your jewelry without allowing it to become dark or dirty. Rinse it in the evening in summer, and in winter check it for integrity and remove excess threads.

Source: https://xn----mtbechcrdba9adf6a.com/news/chem-mozhno-pochistit-zolotuyu-cepochku.htm

Methods for cleaning a gold chain using improvised means

671
Reading time: 5 min.

The image loses its appeal when there is a darkened gold chain around the neck. She attracts attention with her untidy appearance, no longer shines and does not add gloss to the image. On the contrary, it only spoils it.

But it’s not all that scary, and you don’t need to take your gold to a salon or buy a special cleaning product. Primitive home remedies will cope with cleaning a gold chain. You can prepare them from what almost everyone has in the house, and they are even easier to use.

How to clean a gold chain

Gold itself does not react with the environment and most chemical compounds. But it is so soft that scratches and dents easily remain on the products. To add rigidity, other metals are added to it. As a result, gold becomes stronger, but for the same reason, over time it darkens and tarnishes. These are the faults of impurities that are not so resistant to external factors, improper storage and frequent use of jewelry.

There are several ways to clean a gold chain:

  • buy a special cleaning agent for gold – foam or liquid;
  • take it to a jewelry workshop, where they will clean it with ultrasound;
  • clean using the traditional method at home.

With the first 2, everything is very clear - you need to go to a workshop or store and pay money. But if you don’t want to go or pay, improvised means come to the rescue. Our mothers and grandmothers used them for years. Therefore, there is no doubt about their effectiveness and safety.

IMPORTANT! The peculiarity of the chain is that it has many small links connected to each other. Dirt accumulates at the joints, so wiping with a cloth will not help. At the same time, harsh and inaccurate cleaning leads to the chain being scratched or torn.

Cleaning with soda

Baking soda will help with severe contamination if you boil the chain. Pour water into the enamel bowl until the gold is completely covered. Place the decoration there and put it on fire. When the water is hot, add 2 tablespoons of baking soda and bring to a boil. When the water boils, add 1-2 drops of detergent or soap and boil for 2-3 minutes.

After this procedure, all dirt will be removed from the decoration.

Toothpaste or powder

For a long time, toothpaste has been used not only for cleaning teeth. It is also useful for gold. Apply a little paste to the chain and brush with a very soft brush. Then rinse the jewelry thoroughly.

https://www.youtube.com/watch?v=H4y4KIX5zHw

If you clean any gold jewelry regularly using this method, it will always shine and be pleasing to the eye. Instead of paste, you can dilute the tooth powder with water to a paste and brush with a soft brush.

IMPORTANT! The paste is suitable without abrasive, and use a very soft brush with fine bristles. The Chinese often make these to clean their teeth. If you use a hard brush or paste with large abrasive particles, you will doom your gold jewelry to microdamage and scratches.

Soap solution

Liquid or bar soap is suitable, but the bar will have to be grated or scraped with a knife. Dissolve the soap in a small amount of water to create a saturated soap solution. Place the chain there and leave for half an hour. Shake the liquid periodically. Afterwards, rinse the jewelry and leave to dry on a napkin. Once the jewelry is dry, wipe it with a soft cloth to remove any soap marks.

ADVICE! Soap can be replaced with washing powder or dishwashing gel.

Ammonia + peroxide + powder + water

The product is known as toothpaste. Mix the ingredients in the following proportions:

  • ammonia – 1 teaspoon;
  • hydrogen peroxide – 1-2 teaspoons;
  • washing powder – 0.5-1 teaspoon;
  • warm water – 100-150 milliliters.

Place the decoration in the resulting solution and leave for 30-40 minutes, shaking occasionally. Then take out the gold and wash it. The chemical reaction will clean the jewelry no worse than ultrasound.

Other options

The most popular methods are described above, but there are several more options for home remedies for cleaning a gold chain:

  • mix 50-100 ml of warm water and a teaspoon each of boric acid, ammonia and hydrogen peroxide. Add 0.5 teaspoon of liquid soap or dishwashing detergent, stir until all ingredients are completely dissolved. Dip the chain into the solution and wait 25-30 minutes. Stir the chain from time to time with a wooden stick so that the dirt comes off completely. Rinse in clean water and dry with a paper towel or soft cloth;

IMPORTANT! It is better to take a chain with twisted links to a workshop for ultrasonic cleaning.

  • make a paste of salt and lemon juice, you can also use orange juice. Clean the chain with this mixture for 3-4 minutes. Then rinse and dry;
  • mix 2 tablespoons of ammonia with 1 teaspoon of soda. Place the chain there and cover the container with film. Leave for 24 hours. Then rinse it, dry it and rub it with oil;
  • Cover the bottom of a glass or ceramic container with foil. Separately, mix baking soda, salt and liquid dishwashing detergent. Pour half of the mixture onto foil, place the chain on top and cover it with the second part of the mixture. Fill everything with hot water and leave until it cools completely. Then rinse and dry as usual.

Subscribe to our Social networks

Did you like it?

( +1 points, 3 ratings)

Found a mistake? Select it and press Ctrl + Enter. We'll fix everything!

Source: https://tkaner.com/aksessuary/tsepochka/kak-pochistit-zolotuyu-tsepochku/

How to clean a gold chain at home: effective methods

Due to its structure, it is much more difficult to clean gold at home than other metals. It's all because of the structure, which consists of many links. There are many purification methods, but some of them are sample dependent. It is known that gold is an alloy of various metals and this must be taken into account. It's no secret that jewelry needs to be cleaned from time to time so that it does not lose its shine. Let's figure out how to clean a gold chain at home.

Why does gold tarnish

Chains can become dull due to manufacturing defects, and the proportions of the alloy are disrupted. Products are not made entirely of pure gold; a ligature (an alloy of palladium, silver and copper) is always mixed in. This increases strength and wear resistance. But the downside is that by increasing the amount of alloy in the gold composition, it tends to darken. That is why the composition of costume jewelry must fully correspond to the sample.

But if the gold chain has darkened over time, this is not always a defect. Often this reaction occurs due to constant contact with oil that is secreted on the skin. In addition, other contaminants are added, such as sticky substances, microorganisms, dust. All this is combined and a thin film is formed on the surface, which gives this color.

Should jewelry be cleaned?

Among other popular metals, gold is least susceptible to the negative effects of external factors. The appearance is preserved for years due to the fact that the metal practically does not react with other substances. But even despite this, it is worth doing preventive cleaning at least once a year. That is why everyone who owns this metal is recommended to know how to purify gold and with what.

Cleaning a gold chain is problematic; it contains many links. The dirt will be between them, and getting there is not easy. Below we will tell you how to properly clean a gold chain. Of course, in this case it is better to go to a jewelry store and purchase special cleaning products. But the problem is that their price is often steep and unaffordable for some people. Therefore, we will try to clean the chain at home using improvised methods.

Helpful tips for cleaning products

If the appearance of the gold chain has only slightly deteriorated or faded, a simple procedure will be enough. It is also relevant for preventive cleaning. You need to make a regular soap solution and immerse the chain in it for 5-10 minutes. It is better that the water is warm. Now using a toothbrush, thoroughly clean all sides, especially the inside. Whatever method you choose for yourself, follow these simple recommendations:

  • After each procedure, rinse the product in clean water. In some cases, wipe with a soft cloth or wipes.
  • When you need to boil and place the chain in a pan, never place it on a bare bottom. It is better to use a sieve for this, hang it from something or line it with foil inside.
  • When you make the paste, apply it conveniently with cotton pads. Sometimes you can wear gloves and do everything with your fingers.
  • If a gold product has precious stones, then this is worth taking into account. The methods are designed for cleaning gold and may not be suitable for other jewelry. Therefore, for other things, use only the most delicate methods.
  • Polishing is possible using ordinary laundry soap. Grate it on a medium grater. Grind the chalk, the stronger the better. We need one tablespoon of water, chalk and soap. Mix all this into a homogeneous mixture and apply to the product. Rub until shiny.

Salt and soda methods

Salt, due to its structure and composition, copes well with such problems. The gold alloy is extremely durable, making it difficult to scratch. Let's look at exactly how salt purifies gold. To do this, prepare a solution according to one of the recipes:

  • Add 2 tablespoons of lemon juice to the salt. Stir until a homogeneous mass is formed; something like a slurry should form. Put on gloves and rub the gold chain with your hands for several minutes. We wash everything off and wipe dry.
  • Mix ammonia and soda in a 2:1 ratio. Mix well and place the chain there for a day. Now make a concentrated saline solution by adding 3 tablespoons of salt to a glass of water. Rinse the item in water and wipe with this solution. For a new effect, polish with olive oil.
  • Mix baking soda, salt and dishwashing detergent in a 1:1:1 ratio. Take a glass, cover the bottom with foil and place the chain on it. Sprinkle the resulting mixture on top and add moderate amounts of hot water. Leave in this form until the water cools, rinse under running water and dry.

We use products

Not every home has ammonia, but food is available everywhere. In order not to think for a long time about how to clean a gold item, we present you a list of effective recipes using homemade products.

  • First of all, you should use the Coca-Cola drink, which is famous for its ability to cleanse even the most complex stains. Immerse for 1-2 hours and clean using a soft cloth.
  • Add 2-3 large spoons of sugar to a glass of warm water. Stir until completely dissolved and a concentrated solution is formed. Place the gold chain inside for 10-12 hours. Rinse under running water and wipe dry with a soft cloth.
  • Everyone knows how potato pancakes are prepared; to do this, potatoes are grated until a porridge forms. This is exactly what you need to do, and then leave your jewel inside for 2 hours.
  • Use this method with caution to avoid scratching the surface. Mustard powder is rubbed into the metal and washed with clean water. Repeat the procedure until you are satisfied with the result, then wipe it dry.
  • One of the leaders among cleaning products is lemon and citric acid. Dissolve in water in a ratio of 1:10 and immerse the chain there for half an hour. Wash and dry.

We use chemistry

If you don’t have a cleanser, you can make it yourself:

  • Mix ammonia and water in a ratio of 1:10. Leave the gold chain there for 2-3 hours, rinse with waste water and dry.
  • You can clean a gold chain at home using children's toothpaste. To do this, take an unnecessary toothbrush, apply toothpaste and clean the product. Rinse, dry lightly and leave to dry.
  • The easiest way to wash gold is to use ammonia. It does not harm the alloy, so we simply put the chain in a container and leave it for an hour. After this, rinse well to get rid of the smell and dry.
  • Place a teaspoon of ammonia and liquid soap in a glass of water, add 40 ml of hydrogen peroxide and leave the jewelry in the liquid for 15 minutes. Take it out, wash it and wipe it.
  • Peroxide and ammonia are poured into an enamel bowl in a ratio of 2:1. The chain is immersed there, closed with a lid and waited for 10-12 hours. Wash under waste water and dry.
  • Water, ammonia, petroleum jelly and crushed chalk are mixed in a one to one ratio. A thick solution should form; immerse the jewelry for 30 minutes, rinse and wipe dry.

Cleaning with soapy water

The most gentle option for cleaning gold jewelry is a soap solution. It forgives mistakes during preparation and does not harm precious stones. It is recommended to start laundering the chain with this method.

  • Let's start with a method that is not recommended for jewelry with precious stones, but works great for a gold chain. Add two tablespoons of dishwashing detergent and ammonia to a glass of hot water. Stir until everything is well dissolved and place the decoration there for 2 hours, covering with a lid. As always, rinse with clean water and dry with a towel.
  • This recipe will require oxygen bleach. Add a tablespoon of detergent and bleach to a glass of moderately hot water and stir. Throw a gold chain there and leave it for an hour. Wash the residue in clean water and dry.
  • We grate laundry or baby soap. Dissolve the resulting shavings in warm water until a jelly mass forms. We immerse the jewelry for several hours and wipe it with a soft cloth. Rinse with water and dry.
THIS IS INTERESTING:  How to etch a pattern on metal

Heat treatment of gold chain

When solving the question: how to effectively clean a gold chain, they often resort to boiling. When dealing with high temperatures you need to be extremely careful. Try to avoid sudden changes in temperature and do not place jewelry at the bottom of a cookware that gets hot. To do this, it is better to cover the bottom with something, for example with a cloth. To protect jewelry from the hot bottom, it is often placed in a sieve. We will need a saucepan, cloth, soap, hydrogen peroxide, vinegar and soda.

It is important that the gold does not come into contact with the hot bottom, especially when heated. Temperature differences can damage the alloy. Don't neglect the sieve or cloth at the bottom.

  • We make a concentrated solution. To do this, add half a tablespoon of soda to 100 ml of water. Pour the mixture into a saucepan, place the gold chain there and bring to a boil. Add a tablespoon of table vinegar and leave for a few more minutes. Rinse well in clean water and rub with flannel.
  • The easiest way is to add detergent to a pan of water, place the product in a sieve and bring to a boil. A few minutes is enough, take it out, rinse it in water and wipe it off.

Save the result

To ensure that the question of how to clean a gold chain at home bothers you as little as possible, follow these simple recommendations:

  • If you use a gold chain frequently, it is recommended to clean it from time to time with a toothbrush and toothpaste; to do this, rub with light movements slowly.
  • Before going to bed, take off your jewelry and put it in a storage box or simply wrap it in a soft cloth.
  • Ideally kept in a special jewelry box.

Gold cleaning (video)

If the description of the methods is not clear to you or seems incomplete, watch the video about cleaning a gold chain at home:

To keep your jewelry from losing its shine and appearance, take care of it and wash it as needed.

Source: https://comp-plus.ru/uborka/kak-bystro-i-effektivno-pochistit-zolotuyu-tsepochku

How to clean a gold chain at home: 18 secret methods, instructions

A gold chain is a classic piece of jewelry that remains the most desired gift for both men and women. The accessory has not gone out of fashion for many years; you can wear it alone or together with other jewelry.

A gold chain has always been an object demonstrating a person’s high position and wealth.

History of origin

The skill of making gold chains has come to us since ancient times. People who believed in the sun god wore yellow jewelry. In Ancient Egypt, rulers and pharaohs, when they passed away, took gold jewelry with them to their tombs, which symbolized the majesty and divine origin of the deceased.

Many wore a gold chain as a talisman, putting a sacred meaning into it - “the infinity of a closed circle.”

Modern gold chains come in elegant, massive, thin, thick, and various shapes and configurations. Jewelry craftsmen make a variety of products, where everyone can choose a chain to suit their taste.

Thanks to scientific and technological progress, today you can find gold of various shades: pink, red, white and even green, to which precious metals are added.

Feature of gold chain

Gold is a metal that reacts quite difficultly with other metals. It is durable, does not rust, but has the ability to darken and lose its natural shine. The chain may consist of many small parts in which dirt accumulates, which complicates the process of removing it.

Tips before cleaning

If worn daily, a gold chain needs frequent cleaning.

Before you begin the cleansing process, consider the following tips.

  1. If your jewelry has inserts with precious stones (pearls, turquoise, coral), then you should not use aggressive cleaning methods. This can lead to darkening or disruption of the structure of the stone.
  2. After cleaning, the accessory should be rinsed well with water and dried naturally.
  3. In the container used for solutions, the bottom is covered with foil, and when boiling, a small piece of fabric is placed.

Ways to clean a gold chain

There are several methods, tried by experienced housewives, on how to clean a gold chain at home.

4 Ingredient Blend

To make such a mixture you will need:

  • ammonia -1 tsp;
  • hydrogen peroxide 1-3 tsp. (depending on the size of the product);
  • washing powder - a pinch;
  • water - half a glass;
  • small jar.

All ingredients are mixed and the gold chain is placed in the solution for 30 minutes, lightly mixing the contents of the container. Then the accessory is washed with plenty of water and wiped with a napkin. After this procedure, the jewelry regains its shine. But this cleaning method cannot be used if there are stones on the product.

Boiling soda

Boiling soda will help remove dirt from a gold chain at home. An enamel cup is filled with water and put on gas.

A gold item and 1-2 tbsp are placed in it. l. soda The water should cover the product. Bring to a boil and remove from heat. Keep the chain for several minutes and rinse under the tap. The accessory will be shiny again and look like new.

Vinegar 9%

Vinegar solutions are successfully used to combat darkened and contaminated gold jewelry. Vinegar essence is poured into ceramic or enamel dishes. The gold chain is also sent there. Keep the item in the solution for a day.

Vinegar is also added to solutions used for boiling. Pour 100 ml of water into the bowl, add 3 tbsp. soda Gold is added to the mixture. After waiting for it to boil, add 2 tbsp. vinegar and keep on gas for another 3-4 minutes. Take it out, wash it and rub it with a flannel cloth.

Cleaning Products

They also clean a gold chain using edible products.

  • with mustard . Then wash in water and dry with a cotton pad.
  • Grate a fresh onion water. The chain is rubbed with the gruel or left in it for 2-3 hours.
  • The potatoes are turned into porridge and kept for the same amount of time as in the onion mass.
  • Citric acid is dissolved in 100 ml of water, the chain is dipped into it and left for half an hour. The acid can be replaced with freshly squeezed lemon juice.
  • To polish the product to a shine, use 1 tbsp. laundry soap shavings , powdered chalk and tbsp. water. Using a cotton pad, apply the resulting mass to the chain.
  • egg white to 100 ml of beer and rub the resulting mixture into a gold chain. Rinse under running water.

Unusual ways

  1. Carbonated drinks (Cola, Pepsi) can clean gold jewelry from dirty deposits.
  2. Old lipstick can be useful as a cleaning agent. The chain segments are rubbed with it, followed by a cotton pad.
  3. Contact lens cleaner is another way to clean gold jewelry.

    It perfectly removes dirt and dark stains.

  4. If iodine solution gets on the gold chain, you can use toothpaste as a cleanser. You need to lightly rub it into the resulting stain.
  5. Hyposulfite has also proven itself well in the fight against iodine stains.

    A tablespoon of the substance is diluted in a glass of water. Then the chain is placed in the glass and kept in the solution for 30 minutes. They take out the item and run a toothbrush over it.

Thus, you can clean a gold chain yourself at home, using available products.

There are many ways to clean gold jewelry; everyone can choose the most gentle and effective one for themselves.

Source: https://adella.ru/home/cleaning/kak-pochistit-zolotuyu-tsepochku.html

How to clean a gold chain at home - folk recipes and tips

Gold chains are a piece of jewelry that both women and men enjoy wearing. After prolonged wear, such jewelry loses its decorative appeal, its surface becomes cloudy, and the shine and radiance characteristic of products made from gold disappears. To restore the jewelry to its original attractiveness, you need to clean the gold chain; you can use both store-bought compounds and folk remedies.

Available means

In order not to think about how to clean a gold chain from serious contamination, it is necessary to provide such jewelry with regular care, periodically cleaning its surface from dust deposits that form on it, traces of sweat, dead skin cells, and residues of cosmetics and perfumes.

Boiling with soda

A simple way to clean a gold chain from blackness and other contaminants is as follows:

  • an enamel cup is filled with water and placed on the stove to warm up;
  • add 1-2 tbsp to water. spoons of baking soda and place a gold chain in the resulting solution;
  • after the water boils, turn off the stove and wait a few minutes until the solution in it has a cleansing effect on the chain placed in it;
  • The chain is removed from the solution, its surface is thoroughly washed with clean water, wiped dry and polished with a soft cloth.

A few more folk remedies

In addition to those listed above, you can use other folk remedies to clean gold chains, including:

  • Mustard powder. To clean a chain with this product, rub the surface of the product with it, then rinse it with water, dry it and polish it.
  • Potato. The contaminated chain is placed in a creamy mass prepared from finely grated potatoes and a small amount of water for several hours, after which it is washed, dried and polished.
  • Lemon juice or citric acid, in an aqueous solution of which the product to be cleaned is kept for half an hour, after which it is washed and dried.
  • Such products as bread crumb, lipstick, a mixture of chalk and Vaseline, turpentine, ethyl alcohol and chicken egg white can also help restore the shine of the surface of a gold chain.
  • Sprite mixed with fine sea salt in the proportion of 300 ml of drink and 50 g. salt. The product to be cleaned is kept in this solution for 24 hours, after which it is washed with clean water and dried naturally.

Professional products

Today, many special chemicals are offered for public sale, with the help of which gold chains can be cleaned even from persistent and old contaminants. These products, before using which you should definitely read the instructions for their use, include:

  • Solutions intended for professional cleaning of jewelry.
  • Special cleaning pastes. Such pastes, with the help of which the surface of the chain can be cleaned not only of contaminants present on it, but also of blackness, are applied with a cotton pad, after which the product is washed with alcohol and dried.
  • Wipes that can be wet or dry. The latter, before using them, are simply moistened with a small amount of water, after which they can be used to clean the product and return its surface to its original shine and shine.

What cannot be cleaned

Before you start cleaning a gold chain using one of the folk remedies, you should familiarize yourself with the safety precautions. The following measures should be followed when caring for such products in order not to cause irreparable harm to them:

  • Jewelry made from gold, which is a soft metal, should not be cleaned with products that contain abrasive particles. When such particles impact the surface of a gold product, scratches and abrasions may appear on it, which are not so easy to get rid of.
  • To clean items additionally decorated with precious stones, do not use aggressive chemicals. Such jewelry should be cleaned using gentle products: soap solution, special compositions for caring for items with stones, etc.

Products made from gold below 583 standard are cleaned with products that do not contain bleaching components.

  • When cleaning items made from such soft metal, do not use sharp metal objects, contact with which may negatively affect the condition of the surface of the jewelry.
  • Elegant thin chains must be cleaned of contaminants with minimal physical impact on the product, which can lead to its deformation or even breakage.

How to clean a gold chain at home

It is not always possible to take a gold chain to a specialist so that he can clean it of dirt. In this case, you can take the advice of ordinary people and clean the jewelry yourself at home, using improvised means.

Homemade Cleaning Remedies

The chain can be restored to its former beauty, brightness, and expensive appearance quite quickly by choosing one of the classic methods of cleaning the product at home.

Chapstick

Titanium dioxide, contained in hygienic lipsticks, allows you to quickly give your jewelry a beautiful look. The substance is evenly distributed over the surface using a toothbrush. Leave for 10 minutes. Use a toothbrush to clean with light circular movements and then rinse off.

 Increasing the effectiveness of home cleaning, gold chains can be cleaned in several ways. Alternating procedures until the desired effect appears.

Vinegar 9%

The container is filled with 9% vinegar so that the product is completely covered with it. They lower it. After a quarter of an hour, they take out what has not come off, remove it with a toothbrush, and wash the chain itself. Additionally, hard-to-reach places can be treated with salt combined with flour (use the same amount).

Hydrogen peroxide

Any plaque from a gold surface can be removed using hydrogen peroxide and liquid soap. The substances are combined at the rate of 20 ml per ½ tsp, respectively. Dilute ½ tbsp. warm water, add 2 ml of ammonia. Heat the mixture almost to a boil and immerse the chain in it. After about 20 minutes you can take it out, wash it, and dry it.

Soda and foil

Keeping gold jewelry in a sodium bicarbonate solution is considered highly effective. Cover the container with foil and place decoration on top. Separately prepare a soda solution by combining 2 tbsp. l. product with 250 ml of warm water. Fill the decoration so that it disappears. Wash after 10-12 hours.

Drugs

Experts prefer to clean jewelry with various types of preparations. They can also be used at home.

GOLD CLEAN

A French-made liquid cleaner that allows you to remove greasy deposits, residues of perfumes, cosmetics, and soap substances. Suitable for processing gold-plated, gold, platinum jewelry. The chain is immersed in the prepared solution for 2 minutes, the container with the decoration is scrolled (shaken) several times. The product is removed and rinsed. Additionally, after drying, they are polished with special Gold Cloth napkins.

The drug is quite expensive, from 1000 rubles. Before using the product, you should additionally study the manufacturer's instructions.

When using chemicals, you need to protect your hands from damage; for this, wear rubber gloves.

Flurin

The substance is domestically produced and consists of mineral and organic acids, aliphatic alcohol, a corrosion inhibitor, and other components (reagents) that allow not only to remove contaminants, but also not to damage soft metal. It is a solution, sold in small bottles. Suitable for both gold and silver.

Having poured the required amount of solution into the cup, I immerse the product in it for 7 minutes. Additionally, what has not come off is removed with a toothbrush and rinsed. Dry with a cloth or paper napkin. The cost of Flurin varies between 300-400 rubles.

Source: https://lifestyleplus.ru/kak-pochistit-zolotuyu-cepochku.html

Did you like the article? Share with friends:
Metals and their processing
-- Sideb lion (lipk) -->
How to solder heating pipes correctly

Close
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]