How and with what to bleach a silver chain

How to clean a silver chain at home: 9 cool tricks, video

Many representatives of the fair sex prefer silver. Products made from it are attractive and always relevant. An additional advantage is the affordable price of jewelry.

But silver is not without its negative qualities, one of which is the darkening of the metal over time. However, if you know the right methods, you can clean a silver chain or other item with minimal time and physical effort.

Why does silver darken?

There are several factors influencing this .

• Certain chemical elements floating in the air and environment react with silver, as a result of which the metal acquires a dark tint. The greatest influence is exerted by compounds where nitrogen and sulfur are present.
• Interaction with human skin. Active sweating causes a reverse reaction in the metal, which darkens. Therefore, it is better to avoid silver items during periods of intense physical activity.
• Taking medications that contain individual components that affect the color of silver.
• Skin care products can also be one of the reasons why silver turns black.
• Excess moisture is a threat to silver. You should not take a shower or swim in bodies of water while wearing jewelry, as well as wear it too often in rainy weather.

Consider all the above nuances. Otherwise, you will waste time cleaning the products, and they will darken again and again.

How to clean a silver chain at home - general recommendations

Silver jewelry can be chains, rings, brooches, bracelets, pendants, earrings, watches with (or without) inserts of precious stones.

The alloys that make up the jewelry may also differ in their content. Therefore, suitable methods must be used for each type of silver. But there are also general factors that apply to all types of silver products.

• Wash the product from visible dirt. Make a solution of water and soap shavings, immerse the jewelry in it and leave for a couple of hours. Then scrub the jewelry with a soft brush. It happens that such an action returns them to their original appearance and there is no need for further cleaning.
• Do not use too hard materials for work - brushes with coarse bristles, sponges, etc.
• If you bought special products that are used to clean silver, then do not place too high hopes on them, using them in maximum quantities. Increasing the volume will not make it better, but it may ruin the decoration. Therefore, follow the instructions strictly, without retreating a step.
• Do not wear rubber or latex gloves. Due to the high sulfur content in them, the product is more likely to darken. An alternative would be nitrile gloves.
• Finish any cleaning by rinsing the product with warm running water and removing excess moisture with a soft flannel cloth.
• Items made of silver must be dried, otherwise the surface will become covered with stains.
• To store silver items, use a separate box with a tight-fitting lid.
• If the product is too dirty, do not try to do it yourself. It is better to entrust the work to professionals.

It is not recommended to wear silver items for several days after they have been cleaned. This time will be required for the formation of a new protective layer on the surface of the metal, which will become an additional factor responsible for preserving the appearance of silver for a long time.

How to clean blackness from a silver chain?

There are several methods that can be used at home using available materials. All of them differ from each other in the content of ingredients included in the composition of a particular product. So how to clean a silver chain if it has darkened?

Dry cleaning

It involves the use of components that do not need to be diluted with water. The product will simply need to be rinsed at the end of the work.

Baking soda is a universal remedy that can be found in every kitchen. The method using it is one of the most famous. The procedure is very simple:

• Lay a paper towel on a flat surface;
• sprinkle one teaspoon of baking soda on it;
• place your product on a pile of crystals;
• fold the towel so that a bag is formed;
• begin to gently but intensively rub the bag between your palms;
• holding the bag with one hand, open it with the other and begin to pull the chain so that crystalline specks of soda polish its surface;
• Unfold the napkin and inspect the black residue on its inner surface. This is what you have been struggling with;
• Shake the product and rinse it with water.

Dentifrice. Repeat the method with baking soda, only instead of it you need to sprinkle teething powder on a towel. An alternative to a towel can be a piece of soft terry cloth. Clean the remaining powder with a toothbrush, rinse the product and set it aside for a while to form a protective layer.

The cloth will become an indispensable tool with which you can clean tarnished silver jewelry. Therefore, if you are an ardent fan of silver products, you should definitely have this material in your storerooms. It is used for polishing products, which must be done regularly.

Cleaning with wet methods

Involves the use of various liquids.

• Ammonia. It can be found in any home medicine cabinet. If not, then the price is low, and you can purchase the product at any pharmacy. This universal product will clean not only silver items, but also gold and gilding. The method is quite simple. You just need to immerse the silver items in ammonia so that the solution covers them completely. Leave in this condition for 20-15 minutes, rinse with water and dry.
• Fresh lemon juice or citric acid. Squeeze one lemon into a bowl, dip the products in the resulting juice and simmer them in the solution for 10-15 minutes. Rinse with warm water. An alternative to lemon juice is citric acid. A solution is prepared with it: 3-4 teaspoons of “lemon” are diluted in 0.5 glasses of water. The solution must be highly concentrated, then the silver items will shine.
• Vinegar and table salt. Apply the solution: half a glass of warm water, 50 ml of vinegar (9%), 1 tablespoon of salt (preferably sea salt, since its crystals are smaller). Immerse the products in a container with the product for 30-40 minutes. If there are heavily soiled areas, we clean them with a brush. We wash and dry the jewelry.
• A hot solution of salt and water. Boil water and pour table salt into it. You need to achieve a strong concentrate, so you shouldn’t skimp on salt. Immediately lower the silver into the boiling solution and wait until everything cools down. Rinse and dry. If you put foil in the product, the effect of the method will be much better.
• Coca-Cola is known for its solvent properties. You just need to immerse your silver jewelry in it and leave it for two to three hours.

The "heating method" is as follows:

• line the bottom of a small, shallow pan with foil paper;
• pour in soda in the amount of two tablespoons or lemon in the same proportion;
• put silver there;
• pour water until the jewelry is completely covered with liquid;
• boil and keep on low heat for 5 minutes;
• wash the products in warm water and dry with a towel.

Water from boiling potatoes. You need to immerse silver in it, add potato peels (rinse them thoroughly before doing this), and boil the composition for 30-35 minutes. Wash and dry items.

Mechanical cleaning methods

Associated with the processing of jewelry with individual components through intense friction on the surface of the product. The most common remedy is GOI paste.

This method should be used to clean silver very carefully. The paste, called GOI, is designed specifically to restore silver products to their original purity.

You can buy it in special stores. This product will ideally polish jewelry, but it is a good idea to follow the recommendations on the packaging.

To carry out the work, the paste is applied to a cotton or wool cloth, which is pre-moistened in gasoline or other solvent. Then the paste substance will be distributed evenly throughout the fabric.

This will allow you to cover all areas of the product without gaps. In addition, there will be no crystal pieces that can scratch the jewelry. To enhance the effect of the paste, you can coat the silver with a thin layer of industrial emulsion.

All that remains is to clean the jewelry carefully and over time.

Olive or sunflower oil can be used as a means for the mechanical method. It is also applied to soft fabric and, through friction, is distributed over the entire surface of the product.

Then wash off with warm soapy water. Next, the silver needs to be dried.

You can also try cleaning the jewelry with regular paper napkins. They simply carefully rub the surface of things, making some effort. The final result depends on the intensity of friction.

There are many methods for purifying silver. If you know how to properly clean a silver chain or other jewelry made of this metal, then you don’t have to be afraid of such an unpleasant phenomenon as darkening of the silver. And the product will delight you with its beauty and fresh appearance.

Source: https://adella.ru/home/cleaning/pochistit-serebryanuyu-tsepochku.html

How to bleach a silver chain and what to do if the silver chain has turned black: how to bleach silver and polish it

Sooner or later, everyone thinks about how to bleach a silver chain, because products made from this metal are very popular and many people have them.

Silver tends to darken over time, especially if it contains many impurities, which help jewelry to be strong and durable. A large amount of copper can be added to it; it quickly oxidizes in air and the object becomes covered with a dark coating.

Even the purest silver can darken from frequent contact with moisture, sweat and aggressive chemicals.

Today, a silver item that has lost its shine is no longer a problem; humanity has accumulated many ways to get rid of the hated plaque, and even a chain, which is quite difficult to clean, will become like new again after bleaching. Cleaning can be done at home using all available means, but do not forget that the noble metal is soft enough not to be damaged; abrasive substances and sharp objects should not be used.

Now let's look at several methods that will perfectly cope with the problem if, suddenly, the silver chain turns black. Firstly, you can use toothpaste, but only white.

A product in the form of a blue, green or other colored gel will not be suitable for cleaning silver. The paste should be applied to the product and wait 10-15 minutes. After this, you need to remove it with a soft toothbrush and rinse the chain in cold water.

To add even more shine, rub the jewelry with a soft, dry cloth. (see also: Silver cleaner)

Secondly, you will need foil, which should be placed in a glass container at the bottom, and the decoration should be placed on top. Then water is poured into the bowl with a teaspoon of soda and salt added and brought to a boil. Now you need to turn off the fire and leave the silver for an hour.

After the specified time, the silver will noticeably brighten; you can take it out, wash it in cold water and polish it.

Here is another effective method using ammonia, liquid soap and blue. The soap is made from plant ingredients. Blue is sold in any hardware department. All ingredients should be added to hot water and shaken well in a closed plastic bottle.

Once the solution has cooled, you can apply it to the silver chain using a soft cloth. It is necessary to handle the jewelry carefully, observing changes in its condition. After cleaning is completed, the silver is thoroughly washed and wiped dry. If the chain has precious stones, this method cannot be used. (cm.

See also: Cleaning silver at home :)

Before choosing how to bleach silver, it is better to thoroughly wash the jewelry in running, warm water and soap to remove dust, dirt and degrease the surface, then it will not take much effort to restore the original color and shine. (see also: Why does silver turn black on the human body)

When the chain is well washed, you can use ammonia and chalk. They will clean it even stronger and effectively whiten the surface. You should take 50 ml of alcohol and a little chalk, mix everything and apply the paste to the product. Now you need to wait 30 minutes and rinse the jewelry with warm water and polish with a cloth. (see also How to clean a silver chain at home)

Silver is often cleaned with soda, and there are quite a few ways. If there is a small piece of zinc, then you need to fill it with the chain with a soda solution. Soda should be calcined in the amount of one tablespoon per 0.5 liter of hot water. After 30-40 minutes have passed, you can rinse and dry the silver.

Potatoes are also useful for cleaning, because starch copes with plaque no worse than soda. Two raw potatoes are grated, a chain is placed in the resulting mass for 30-40 minutes.

After the specified time has elapsed, all that remains is to rinse and polish the product made of precious metal. If possible, it would not hurt to purchase sodium hyposulfite and use it with water in a ratio of 1:3.

Wipe the silver jewelry with this solution and rinse it well after five minutes.

A solution of milk and vinegar will help you cope with this task: for two glasses of milk you need five teaspoons of vinegar or citric acid. Place silver jewelry in a plastic plate and fill it with solution, leaving it overnight. In the morning, all that remains is to rinse and dry the chain with a soft cloth.

Sulfuric acid, Coca-Cola, lipstick, eraser, salt and many other substances will help in the question of how to bleach a silver chain, simply and quickly. For example, you can boil the decoration in Coca-Cola for five minutes.

Significant changes in appearance for the better become immediately noticeable. You can also boil the product in a solution of citric acid: take 0.5 liters of water per hundred grams of the substance. The process lasts 20-30 minutes.

If there is no citric acid, a soap solution is suitable for boiling.

Sulfuric acid effectively cleans silver; you don’t need to specifically look for it throughout the city, but if you happen to have it at hand, then even a weak solution can deal with the plaque very quickly.

You should take precautions when handling aggressive chemicals. But olive oil will definitely not harm the chain. You can rub the surface with a soft cloth, rinse with hot water and dry on a paper towel.

Boiling silver with onion skins and egg shells also has a good effect on plaque. (more details: How to clean silver at home)

Mechanical cleaning can also be effective, but there is always a risk of damaging the surface of the jewelry, so it is not suitable for valuable, expensive items. For such products, it is better to use special products sold in jewelry stores. By using them, you can be calm about the appearance of a chain, bracelet, ring or other jewelry, and if there are inclusions of precious stones, then they are simply irreplaceable.

Before polishing silver or bleaching jewelry, you should make sure that it is stored and used correctly, otherwise you will have to do it very often and waste a lot of time and effort.

The noble metal quickly oxidizes when interacting with hydrogen sulfide, moisture, human sweat and fat, so before storing products, they should be washed and dried well.

It is better to place the chain, ring or earrings in a tightly closed box or wrap them in soft, natural fabric. The room where the silver is located should not be too humid.

When using jewelry, you must also follow certain rules: remove it at night, during sports, and during illness. Before cleaning the apartment and performing cosmetic procedures, silver should also be put aside. If you follow all the recommendations, wash the chain every day in warm water and soap, then there will be no special hassle with cleaning and the formation of blackness.

Magnificent products made of precious metal will delight you with their irresistible brilliance and beauty for a long time. And yet, it is worth remembering that they are very fragile and require careful handling. Silver jewelry should not be thrown or jerked sharply, especially thin chains. To prevent the metal from darkening for as long as possible, you need to buy things with a high purity, for example 925.

The lower the sample, the faster an unpleasant coating will appear.

Why does silver darken on the human body: all the reasons and ways to solve them

People who use silver jewelry sometimes ask the question: “Why does silver darken.

Silver is one of the most beloved and common metals in everything.

How and how to clean a silver chain at home

Many people prefer to wear silver jewelry, the healing properties of which have been known since.

Cleaning silver at home: ammonia, soda and other means

Silver is a beautiful and noble metal, but it is not easy to care for.

The economic situation in the country still remains bleak. Ruble.

Dollar forecast for 2015: forecasts for the growth and value of the dollar

The horses of the year are approaching, a period in which specialists in all fields fail.

Gold rate forecast for 2015: rate forecast and gold price dynamics

When store shelves are empty within hours of opening, .

Which gold is better

The question of which gold is better will always be relevant, because...

The ruble is diving into the abyss - invest money in gold

Gold is a precious metal that does not deteriorate or change.

Designer jewelry made from natural stones

The beautiful half of humanity has always strived to look beautiful and impressive. More .

Today we are witnessing such a paradox: the amount of precious metals mined.

We can see a lot on the shelves of jewelry stores.

Every coin collector not only dreams of a permanent...

For the first time in our country, Sberbank gold investment coins.

Gold is a valuable metal that everyone strives to possess, but...

Nowadays you need to know and be able to how.

Every numismatist knows a lot of interesting information or has come across it.

Gold in Latin is "Aurum", denoted by the combination of letters "AU".

When copying materials, an active backlink is required | Sitemap | Connect with us

Source: https://potta.ru/chistka-veshhej/kak-otbelit-serebryanuyu-cepochku-i-chto-delat-esli-serebryanaya-cepochka-pochernela-chem-otbelit-serebro-i-otpolirovat-ego

How to bleach a silver chain

Anyone will certainly think about how to bleach a silver chain, since products made from this metal are very popular and are owned by most.

Silver tends to darken over time, especially if it contains a large number of impurities, which help jewelry to be strong and durable. A lot of copper may have been added to it; it quickly oxidizes in air and the object becomes covered with a black coating.

In addition, the purest silver can darken from frequent contact with moisture, and later, aggressive chemicals.

Nowadays, a silver item that has lost its luster is no longer a nuisance; mankind has accumulated a large number of ways to get rid of the hated plaque, and also a chain, which is quite difficult to clean, will become like new again after bleaching. Cleaning can be done at home using all available means, but we should not forget that the precious metal is soft enough not to break it; abrasive substances and sharp objects should not be used.

Cleaning the chain with toothpaste and foil

Now let's look at a couple of ways that will perfectly cope with the problem if, suddenly, the silver chain turns black. Firstly, you can use toothpaste, but only white.

A light blue, green or other color gel product is not suitable for cleaning silver. Apply the paste to the product and wait 10-15 minutes. Then you need to remove it with a soft toothbrush and rinse the chain in cold water.

To add even more shine, rub the jewelry with a soft, dry cloth. (see also: Silver cleaner)

Secondly, you will need foil, which you need to put in a glass container at the bottom, and place the decoration on top. After this, water is poured into the bowl with a teaspoon of soda and salt added and brought to a boil. Now you need to turn off the flame and leave the silver for an hour. After the specified time, the silver will noticeably brighten; it is possible to take it out, wash it in cold water and polish it.

Here is another effective method using ammonia, liquid soap and blue. The soap is made from plant ingredients. Blue is sold in any hardware department. Add all ingredients to warm water and shake well in a closed plastic bottle.

While the solution has cooled, it can be applied to the silver chain using a soft cloth. You need to handle the jewelry with caution, noticing the transformation of its condition. Once the cleaning is complete, the silver is carefully washed and wiped dry.

If the chain contains precious stones, this method is prohibited. (see also: Cleaning silver at home:)

How to return silver to its original appearance?

Before choosing how to bleach silver, it is better to carefully wash the jewelry in running, hot water and soap in order to remove dust, dirt and degrease the surface, then a lot of effort will not be required to restore the original color and shine. (see also: What causes silver on the human body to turn black)

When the chain is well washed, you can use ammonia and chalk. They will clean it even stronger and effectively whiten the surface. Go take 50 ml of alcohol and a little chalk, mix everything and apply the paste to the product. Now you need to wait 30 minutes. and rinse the jewelry with hot water and polish with a cloth. (see also How to clean a silver chain at home)

Quite often, silver is cleaned with soda, and there are many ways. If you have a small piece of zinc, you need to fill it with the chain with a soda solution. Soda should be calcined in the amount of one tablespoon per 0.5 liter of hot water. After 30-40 minutes have passed, you can wash and dry the silver.

For cleaning, you will also need potatoes, since starch copes with plaque no worse than soda. Two raw potatoes are grated, a chain is placed in the resulting mass for 30-40 minutes.

At the end of the specified time, all that remains is to rinse and polish the precious metal product. If possible, it would not hurt to buy sodium hyposulfite and use it with water in a ratio of 1:3.

Wipe the silver jewelry with this solution and after five minutes. rinse it well.

A solution of milk and vinegar will help you cope with this task: for two glasses of milk you need five teaspoons of vinegar or citric acid. Place silver jewelry in a plastic plate and fill it with solution, leaving it overnight. In the morning, all that remains is to rinse and dry the chain with a soft cloth.

Simple tips for cleaning silver

Sulfuric acid, Coca-Cola, lipstick, eraser, salt and many other substances will help in the question of how to bleach a silver chain, simply and quickly. For example, it is possible to boil the decoration in Coca-Cola for five minutes.

Significant changes in appearance for the better immediately become noticeable. In addition, it is possible to boil the product in a solution of citric acid: take 0.5 liters of water per hundred grams of the substance. The process lasts 20-30 minutes.

If there is no citric acid, a soap solution is suitable for boiling.

Sulfuric acid effectively cleans silver; you shouldn’t deliberately look for it throughout the city, but if you happen to have it at hand, then a not strong solution can deal with the plaque very quickly.

be directed to carry out safety measures when handling aggressive chemicals. But olive oil will definitely not harm the chain. You can rub the surface with a soft cloth, rinse with hot water and dry on a paper towel.

In addition, boiling silver with onion skins and egg shells has a good effect on plaque. (read more: How to clean silver at home)

Mechanical cleaning can also be effective, but there is always a risk of damaging the surface of the jewelry, so it is not suitable for useful, expensive things. For such products, it is better to use special products sold in jewelry stores. Using them, you can rest assured about the appearance of a chain, bracelet, ring or other jewelry, but if there are inclusions of precious stones, then they are simply irreplaceable.

How to properly store silver?

Before polishing silver or bleaching jewelry, you should make sure that they are properly stored and used, otherwise you will need to do this often, spending a lot of effort and time.

Precious metal quickly oxidizes when combined with hydrogen sulfide, moisture, human fat and fat, therefore, before sending the products for storage, wash them and dry them well.

It is better to place the chain, ring or earrings in a well-closed box or wrap it in soft, natural fabric. The room where the silver is located should not be too humid.

When using jewelry, you also need to follow certain rules: remove it at night, during sports, and during illness. Before cleaning the apartment and performing cosmetic procedures, silver must also be put aside. If you follow all the recommendations and wash the chain daily in hot water and soap, then there will be no particular hassle with cleaning and the formation of blackness.

Beautiful products made of precious metal will delight you with their irresistible brilliance and beauty for a long time. And yet, we should not forget that they are very fragile and require careful handling. Silver jewelry should not be thrown or jerked sharply, especially narrow chains. To prevent the metal from darkening as long as possible, it is necessary to take things with a high standard, for example 925.

The lower the sample, the faster an unpleasant coating will appear.

See also this

Source: http://chelexport.ru/healthteeth/kak-otbelit-serebrjanuju-cepochku.html

How to clean a silver chain quickly and efficiently

› Caring for things

Silver jewelry looks very elegant and gives its owners a special charm and magnetism. However, after some time, silver tends to become dirty and turn black.

Therefore, products made from this noble metal require special care. The article discusses how to clean a silver chain quickly and effectively.

Why does silver jewelry darken?

Before we look at methods for cleaning a silver chain, let's first understand the reasons for the darkening of jewelry. The fact is that, first of all, silver is a chemical element. Therefore, it enters into a chemical reaction with the following substances:

• with gases that are part of atmospheric air;
• with tap water, as well as sea, river and chlorinated pool water;
• with fat and sweat secretions of the human body;
• with beauty products, perfumes, styling products.

Also, if the chain turns black too quickly, it can be assumed that it is made of low-quality silver.

What to consider when choosing a cleaning method

Currently, there are many known methods that will help clean a silver chain from blackness and dirt. However, to do this correctly, you need to pay attention to the following characteristics of the product:

• Sample - using this indicator, you can determine the percentage of silver in the jewelry. For example, a sample of 800 indicates that a kilogram of the product contains eight hundred grams of precious metal.
• Impurities. Copper is most often added to silver jewelry; it is its good ability to oxidize that causes the chain to turn yellow or darken.
• Inserts. To clean products with stones, you need to take into account many nuances, including methods of attaching inserts.

Home remedies for cleaning silver

Many housewives doubt that it is possible to tidy up silver at home. However, armed with some life hacks, this is not difficult to do. Let's consider further how to clean a silver chain from blackness using traditional methods.

Baking soda and vinegar for blackheads

To quickly clean a blackened silver chain and cross, it is best to use nine percent table vinegar. In this case, you should use one of two proven methods to clean the jewelry:

• Apply a little caustic liquid to a soft cloth and gently rub the product, paying special attention to the stained areas.
• If there are old stains, immerse the silver chain in a small container with table vinegar for two to three hours. Then take it out and wipe dry.

You can also use baking soda to effectively clean your silver chain until it shines. To do this, select one of the following options:

1. Apply a narrow strip of powder to a clean, damp cloth and place the decoration along the strip. After that, hold the chain through the fabric in your hand and rub vigorously for three to four minutes. Upon completion of the hygienic procedure, you will need to remove the remaining soda and contaminants by any available method.
2. Prepare a special paste by diluting baking soda with clean water until you obtain a creamy consistency. The resulting mixture must be applied to the darkened jewelry and carefully clean its surface. After that, rinse the silver chain with water and dry it.

Source: https://chistyulka.ru/uhod/kak-pochistit-serebryanuyu-tsepochku

How to clean a silver chain from blackness at home - methods

Silver has accompanied man throughout history. It was used to make coins, medical instruments, and components of various devices, but it spent most of its time in the form of jewelry.

The most common piece of silver jewelry can rightfully be considered a chain. This is a neutral, discreet decoration, while adding a kind of mysticism of the purity of the metal. But, unfortunately, the metal gradually begins to darken. These are traces of metal oxidation.

Below are ways to clean your silver chain.

Dry cleaning

The first known way to bleach a silver chain is to use products without adding water.

Baking soda or tooth powder

The first ingredient to use is baking soda. A widely used method for cleaning jewelry from dirt is as follows:

• Place the decoration on a paper towel.
• Sprinkle a teaspoon of baking soda on a towel.
• Put the chain on the slide of the product
• Fold the towel into a bag shape.
• You need to rub the chain well through this bag..
• Using one hand, open the bag and pull out the chain so that the soda crystals touch the surface of the ornament.
• Rinse under running cold water.

As an alternative to baking soda, you can use tooth powder. Toothpaste uses the same principle of action. The paper towel can easily be replaced with a soft terry cloth. The remaining powder after the procedure must be washed off and left for a while to form a protective layer.

You can use cloth for polishing. If you regularly polish a silver item, there will be no problem with blackening of the jewelry.

Wet cleaning

The method involves the use of liquid cleaners. Traces of silver oxidation can be removed with the following liquids:

• Ammonia.
• Lemon juice.
• Vinegar along with table salt.
• A solution of salt and water.
• Carbonated drinks and other “homemade” methods.

You can clean a silver chain with ammonia. It is always available in the first aid kit, and the price is not too high. The product can be used not only on silver items, but also on gold and gilding. To clean, dip the chain in ammonia with full immersion and leave for a quarter of an hour. Afterwards, you need to rinse and dry the decoration.

For this “recipe” you will need the juice of one lemon or a solution of citric acid (4 tablespoons per 125 ml of water). If you are preparing a solution, then try to achieve a concentrate. Place the product in the liquid for 10 minutes and you can remove it. Rinsing after the product is mandatory.

Mix a solution including 125 ml of warm water (necessary for better dissolution), 50 ml of 9% vinegar and a tablespoon of fine salt. Dip the silver jewelry in the container for 40 minutes and wait until the oxide is washed off. In case of serious contamination, use a brush. Cleaning and drying is also required.

Coca-Cola is a rather controversial solvent, but many housewives recommend it for cleaning minor stains on jewelry. For the desired effect, you need to leave the silver in the cola for several hours.

Use the water in which the potatoes were boiled. The method involves cleaning the jewelry by boiling it in water with the peel washed for 30 minutes. After the procedure and cooling, rinse with water and dry on a towel.

Using ready-made funds

In order not to worry about the effectiveness of the method, silver jewelry can be cleaned using professional means. Contact jewelry stores and purchase special products, most often soap and soaked wipes, which will restore the original shine and remove traces of metal oxidation.

A more radical method: purchasing an ultrasonic silver cleaner. In this case, the method of use will be specified in the instructions.

You can clean a silver chain from blackness at home not only with napkins and soap. Use GOI paste. The method is quite complicated. Due to the need for careful cleaning, but extremely effective. The product can be purchased at a specialty store. The processing method is as follows:

1. Apply the paste to natural fabric (wool, cotton) soaked in gasoline. Gasoline is necessary for complete distribution of the product on the fabric.
2. Apply industrial emulsion to a silver product to enhance the effect.
3. Cleaning is in progress. This process is labor intensive, but extremely effective.

Using improvised means

Use regular paper napkins or towels. Normal friction can also remove the oxidized layer. The main thing in this method is the intensity of friction.

You can use foil as a handy tool. For this method, you need to place the foil in a container and add a few tablespoons of soda or citric acid and decoration. Let the solution boil for a few minutes and remove the product.

A similar method involves adding silver jewelry in a foil envelope, salt, water and soap to the pan. It is necessary that the mixture reaches a boil and then turn it off. After waiting a little until it cools, the cleaned jewelry is removed.

To enhance the effect, you can clean it with a cloth soaked in ammonia.

One of the generally available methods is hot saline solution. Bring water to a boil, dissolving salt in it until the brine concentration is reached. Dip the silver and turn off the gas. Wait until the water cools completely and the plaque will be removed. To enhance the effect, you can add a piece of foil. Aluminum has a beneficial effect on oxide removal.

Prevention and some tips

Store silver items in a separate, locked place, such as a jewelry box.

Silver must be kept only in an environment favorable to it. Skin elements can secrete substances that can become prerequisites for oxidation. Therefore, after wearing the chain, be sure to wipe the jewelry with a cloth soaked in ammonia, protecting it from contamination.

Some people recommend covering the jewelry with clear nail polish to protect it from dirt.

Perfume and oils used by people speed up the oxidation process of silver. When wearing a silver chain on your body, try to refrain from using such products.

Prevention will never be superfluous. We recommend carrying out preventive cleaning of silver at least twice a month. If plaque appears, its removal will be much easier.

Source: https://iHouseWife.ru/garderob/chistka-serebryanoy-tsepochki

How to clean a silver chain at home: remedies for blackness and shine, causes of darkening, preventive measures

In large jewelry houses, when purchasing a silver chain, special cleaning agents are included with it. This is convenient: you don’t need to purchase additional cosmetics for jewelry or remember the available methods of self-processing.

Causes of blackening

There is a superstition that silver darkens, foreshadowing a serious illness of the owner of the item. A change in the color of the chain with a cross is considered a particularly bad omen. In fact, jewelry becomes unattractive due to improper care. The luster of a metal disappears as a result of chemical reactions that occur when it comes into contact with:

• body cosmetics or perfumes;
• Then;
• sea ​​water.

Also, the silver chain becomes coated in too humid climates.

Silver darkens if stored improperly or for a long time. Without exception, all jewelry must be cleaned periodically.

Typically, jewelry stores offer the following care products and procedures.

• Polishing liquid. The set includes a brush and a basket for immersing products in the solution.
• Reusable cleaning wipe. Removes plaque without leaving scratches. Impregnated with a special liquid that slows down oxidation processes and protects against tarnishing.
• Disposable cleaning wipes. The principle of operation is the same as in the previous version.
• Ultrasonic cleaning. Under the influence of ultrasonic waves, plaque is pushed out even from the most inaccessible places - chain links, corrugated areas on the suspension.

Home Recipes

All of the cleaning options listed above are effective against black on silver. But if you don’t have specialized products at hand, then you can try to bleach the chain, as well as the cross, using one of the five traditional methods.

Ammonia and toothpaste

What you will need:

• cup;
• Toothbrush;
• a few drops of ammonia;
• baking soda - two tablespoons;
• toothpaste (preferably gel) - two tablespoons.

Sequencing

1. Prepare a homogeneous slurry from the paste and soda, add ammonia and mix thoroughly.
2. Place the chain in a cup with the prepared mixture and leave for 20-30 minutes.
3. Remove the chain from the composition. In places where black plaque remains, rub the product with a toothbrush.
4. Rinse the jewelry with clean water.

Salt, soda and foil

What you will need:

• pot;
• table salt - two tablespoons;
• some water;
• baking soda - two tablespoons;
• sheet of foil for baking.

Sequencing

1. Line a pan with foil and pour water into it.
2. Place the chain in the pan and cover with a mixture of salt and soda.
3. Place on low heat.
4. When the product is sufficiently clean (this can take from five to 20 minutes), remove it, rinse with running water and dab with a towel.

This method allows you to quickly get rid of blackness without using a brush. Instead of soda, you can use vinegar or lemon juice. But you shouldn’t treat products with stone inserts this way.

What you will need:

• ammonia 10% - ten drops;
• water - 100 ml;
• liquid soap - one teaspoon.

Sequencing

1. Pour ammonia solution, soap and water into a container with a lid.
2. Place decoration into mixture.
3. Close the container tightly.
4. Leave for 25-35 minutes.
5. Rinse the chain in running water.

When using homemade jewelry cleaning solutions, wear gloves. This will protect your hand skin from irritation.

What you will need:

• ceramic plate;
• sheet of food foil;
• several potato tubers.

Sequencing

1. Boil the peeled potatoes until tender, rinse the potato skins well.
2. Cover a ceramic plate with foil and pour hot potato broth over it.
3. Place the chain and potato peelings on a plate.
4. Leave everything for 20-25 minutes.
5. Remove the jewelry and wipe it with a woolen cloth.

The potato peeling option is only suitable for products without inserts: the stones may become cloudy.

Soap with vodka

What you will need:

• water - 50 ml;
• laundry soap - 1/3 piece shavings;
• lemon - one piece (or 10 g of citric acid);
• vodka - 50 ml.

Sequencing

1. Prepare a solution from soap solution, vodka and lemon juice (citric acid).
2. Place the product in a container with the solution and leave it there overnight.
3. In the morning, remove the jewelry from the composition, rinse thoroughly and then dry.

Areas where minor dark spots remain are cleaned with a soft toothbrush, woolen cloth or tooth powder. You may find recommendations to use hydrogen peroxide, but this is only relevant for gold products. It can damage silver jewelry, leaving a persistent white coating on it.

To prevent the chain from darkening so often and to look like new, wear it following these five recommendations.

1. Take pictures while working out in the gym. And also in the sauna, at the sea, before bed.
2. Wipe regularly with a soft flannel cloth. This will remove sweat and makeup particles.
3. Avoid getting wet. But if this happens, immediately wipe the product dry without waiting for it to dry on its own.
4. Store wrapped in a thick cloth. Or in a box with fabric upholstery. Be sure to separate it from jewelry made of other metals.
5. Do not place near medications or cosmetics. This may increase oxidation.

To prevent severe contamination, it is recommended to clean your silver chain once every two months.

Source: https://DomZnatok.ru/uborka/uhod-za-veshhami/kak-pochistit-serebryanuyu-cepochku-v-domashnih-usloviyah/

How to clean a silver chain at home: 12 ways

:

1. Cleaning methods
2. How to protect silver jewelry from blackening

In stores, when purchasing jewelry, they often offer to purchase ready-made silver care products. Liquids, pastes, soaps and special wet wipes will provide gentle care for the metal and help gently remove blackening; The main thing is to follow the instructions. There is even an ultrasonic cleaner for silver jewelry that is patented in the USA.

Clean your silver jewelry every 2 months as a preventive measure.

But what to do if special equipment is not at hand? Folk remedies and proven methods will help you clean your silver chain.

Before using acid cleaning methods (acetic, citric or any other), make sure your chain is 100% silver and free of other metals.

Toothpaste

Toothpaste will do the job well. Do not use colored or gel-like paste to clean silver items; regular white paste will do. Squeeze it onto the chain and scrub gently with a soft toothbrush. After completing the procedure, rinse the jewelry with water and dry with a flannel cloth. The product will acquire its original shine and beauty. An alternative option is to use tooth powder .

Regular white toothpaste can easily clean silver jewelry.

Ammonia

Dilute ammonia with water in a ratio of 1:10, soak a piece of soft cloth or gauze in the solution and gently wipe the jewelry. If there is a lot of blackening, you can additionally immerse the product in the solution for 10-15 minutes. After the procedure, rinse the chain with water and wipe with a soft cloth.

For cleaning, use only a soft cloth, such as flannel or wool.

Powdered chalk

Another remedy that makes it easy to clean a silver chain is crushed chalk, diluted with ammonia for effectiveness. Prepare a paste-like consistency from the ingredients and clean the silver item. For convenience, use a soft toothbrush. Be sure to wash and dry your jewelry after the procedure.

Powdered chalk is diluted with ammonia for effectiveness.

Olive oil

Olive oil will help to cope with blackening on silver. Wipe the jewelry thoroughly with a soft cloth soaked in oil. After the procedure, wash the product in soapy water, then rinse with water and wipe dry.

Olive oil can also help with dark spots

Baking soda and lemon juice

Mix a teaspoon of baking soda with a drop of water to make a paste, and wipe the jewelry using a soft toothbrush. Rinse the product with water and dry with a soft cloth.

To clean the chain, use only mild abrasives: chalk, baking soda, tooth powder or paste.

Lemon juice can remove strong stains on silver. Pour the juice into a glass bowl and place the chain there for 15-20 minutes. After the procedure, do not forget to wipe the product dry. You can replace the juice with citric acid. For 100 ml of water, 1 teaspoon will be enough.

Baking soda and lemon will help restore shine to silver jewelry

Vinegar

Pour some vinegar into a suitable container and soak the silver chain for 1-2 hours (no more!). After the procedure, thoroughly rinse the jewelry from acetic acid and wipe with flannel. If the darkening is barely noticeable, you can simply wipe the blackened areas with a soft cloth soaked in vinegar.

Clean jewelry with vinegar carefully.

Foil

Line the bottom of a small pan with foil, place the decoration and fill with water and baking soda (2 teaspoons of baking soda per 1 cup of water). Boil for 5 minutes and then leave the product in the solution for another 10 minutes. After completing the procedure, rinse the chain in water and wipe dry.

Regular foil will help to cope with blackening.

Potato

To clean silver from darkening, you can use the water in which potatoes were boiled. Drain the boiled potatoes into a pan lined with foil and leave to soak for 15 minutes.

A good remedy can be made from raw potatoes. Grate the vegetable on a fine grater, fill it with cold water and dip the decoration into this mixture. Leave for 10 minutes, then remove the product and, without rinsing, polish it to a shine with a soft cloth.

Potato decoction or raw potatoes will help clean the chain

Salt

Prepare a highly concentrated saline solution using salt and boiling water and keep the jewelry in it until the water cools. For greater efficiency, add a piece of foil to the glass. After the procedure, rinse the product with water and dry.

Salt is a great cleaning aid

Other means

Effective cleaning solution : Take 2 tablespoons each of water, lemon juice and vodka, add a few drops of dishwashing liquid and mix thoroughly. Place the jewelry in the resulting solution overnight, and in the morning, rinse the item thoroughly and wipe dry with a soft cloth.

Hard-to-remove green stains from jewelry can be removed with a soapy solution and soda . Dilute 1 teaspoon of baking soda in a glass of soapy water and boil the product in the resulting solution for 5 minutes. Rinse thoroughly with water and dry. You can add 1 teaspoon of ammonia and place the silver chain in the solution for 1 hour.

If the chain has stone inserts, clean it only by hand, do not boil or soak it in solutions. Clean jewelry with amber, pearls and coral in jewelry workshops

Surprisingly, a great way to clean a silver chain is Coca-Cola . Soak the jewelry in the drink for 1-2 hours, then rinse with clean water and dry.

You can restore the shine of a silver chain using cloth . Rub the jewelry thoroughly with cloth.

To clean the chain from light darkening, you can use lipstick or foundation . Apply the product to the jewelry and clean with a soft cloth.

Many people advise coating a silver chain with colorless varnish to prevent darkening. However, the varnish will peel off over time, and the decoration will take on a sloppy appearance.

How to protect silver jewelry from blackening

You can avoid the appearance of darkening and green spots on silver by using the following tips:

• each time you remove jewelry, wipe it with a flannel or other soft cloth;
• take off the chain when doing physical exercise - silver quickly darkens from sweat;
• noble metal does not like moisture, and it deteriorates from sea water - remove jewelry before water procedures, do not wear it on the beach, do not leave it in damp and stuffy rooms;
• if you use cosmetics or medicinal products that contain sulfur, do not put the chain on immediately, let the composition absorb;
• keep the chain away from medications;
• Clean your jewelry as a preventative measure at least once every 2 months.

Store your silver in a box lined with a soft cloth inside

Source: https://hozpedia.ru/kak-pochistit-serebrjanuju-cepochku.html

How to whiten a silver chain at home? — Comfort of Your Home

Many owners of silver jewelry are faced with the problem of blackening of the metal, as a result of which the presentability of the products is lost. This situation can be corrected by bleaching silver at home and removing the blackness. You should be careful, as each accessory made of precious metal is unique and requires special treatment.

How can you clean silver?

Today there is no need to spend money on paying for the services of specialists involved in cleaning jewelry. In the arsenal of modern housewives there are many different means with which you can quickly restore the shine of your favorite jewelry at home on your own. You can bleach silver from blackness:

• special drugs;
• with improvised means.

When choosing the first option, it is important to carefully read the manufacturer’s instructions and study the rules for using the chemical.

The advantage of traditional methods is the lack of costs for purchasing cleaning materials, since they are almost always available in the house.

Regardless of the chosen method, to bring silver items to their original form, it is important to properly prepare them for work.

Basic methods

For effective cleaning, you must first remove fat from the product. This can be done with ordinary soapy water and a toothbrush with soft bristles, which will remove dirt even on jewelry with many curves and decorative elements.

Removing greasy particles will further improve the efficiency of black removal, since the cleaning agent will have access to the noble metal. When finished, rinse the silver item in cool water and wipe dry with a paper towel.

Instead of soap, you can use shampoo or dishwashing detergent. They are unable to spoil a silver item, but can effectively remove grease from items. When choosing a cleaning method, you should follow the recommendations for the use of products, which will allow you not to spoil the product made of precious metal.

Ammonia, vinegar, peroxide

If you want to restore the shine of jewelry, you should use ammonia, which can be purchased at any pharmacy. To quickly bleach silver or a chain from blackness at home, you need to:

• prepare an ammonia solution from 10 ml of the drug and 0.5 cups of water;
• pour the liquid into a shallow container;
• place the silver item in the solution;
• After 15-30 minutes, remove the decoration.

The silver item must be thoroughly wiped dry. For heavily soiled accessories, it is permissible to use pure ammonia, but the total soaking time in the liquid should not exceed 10 minutes.

To increase efficiency and better remove blackness, some use a mixture of ammonia and hydrogen peroxide, but this product is not effective for all silver items. Before soaking, you need to conduct a test by applying a small amount of solution to the back of the item. If the effect of the appearance of light areas is observed, then the method is acceptable for removing blackness.

You can use table vinegar for cleaning. To do this, simply place the jewelry in essence diluted with water for 1-2 hours, then rinse thoroughly and wipe dry.

Teeth Cleaning Powder

If the silver jewelry has not darkened much, you can use tooth powder. The advantage of this method is its low cost and absolute safety for the accessory. Sequencing:

• moisten a cloth with soft bristles;
• apply a small amount of powder to the fabric;
• perform cleaning movements until the blackening is completely removed.

After cleaning, rinse the product with cold water and wipe well. It is important not to squeeze the object while performing work, since silver is considered a soft metal and can be deformed if handled carelessly. It is worth considering the suitability and condition of the powder, since if lumps appear, there is a high risk that the surface of the silver product will be scratched.

Baking soda

Baking soda is considered a natural cleaning agent. At a low cost, it is absolutely safe for humans. To clean silver items, you need to make a paste; just dilute 1 tbsp. l. product with water. The resulting product is applied to the fabric and wiped over the silver surface to completely remove the stains, after which the product is washed and wiped.

Cleaning silver can be done using a hot soda solution. To do this, take 20 g of soda and dissolve it in 250 ml of water, after which the mixture is put on fire. At the moment of boiling, silver items must be placed in the solution and kept on fire for 15 minutes. Then it merges and after wiping, the silver jewelry looks like new.

Lemon acid

To clean with citric acid, you need to prepare a solution of 100 g of product and 0.5 ml of water. The liquid must be put on fire and a small piece of copper wire placed in the container. At the moment of boiling, place silver objects into the liquid and keep them in the lemon solution for 15 minutes, after which they are washed and wiped.

Detergent

The cleaning method is based on the effect of temperature and active components of the composition. The following ingredients are used to prepare the solution:

• water - 0.5 l;
• salt - 10 g;
• soda - 10 g;
• detergent - 10 ml.

The main components are thoroughly mixed and the solution is heated. At the moment of boiling, silver objects are lowered into the solution and held until completely cleansed. The advantage of this method of cleaning precious metal is that it requires minimal human effort. After removing the dirt, just rinse and wipe the jewelry.

Emergency help

There are emergency methods when there is no time for lengthy boiling procedures and preparation of special solutions. To get the effect, just wipe the stained areas with a cloth with regular olive oil or apply lipstick to the jewelry first. You can use a regular eraser to remove blackness.

When choosing a way to bleach a silver ring, you should consider the degree of contamination. The proposed options will help with minor contamination; severe contamination will require more effective means.

Special cleaning products

If the jewelry contains precious stones or inserts made of pearls, amber, or corals, you should give preference to special cleaning products or use the services of a jewelry maker. You cannot use strong solutions based on ammonia or vinegar to remove stains, as this will lead to damage to the jewelry.

Popular silver cleaning products include:

• Aladdin;
• Font;
• TOWN TALK.

Cleaning preparations can be in the form of a gel, aerosol, or solution. You can purchase them for cleaning jewelry at jewelry stores. At the same time, it is recommended to buy special napkins, since, compared to even the softest fabrics, purchased products guarantee gentle handling of silver jewelry.

Important points

There are special types of silver jewelry for which popular traditional methods are not suitable for cleaning. This category includes blackened silver and irradiated metal. They can be treated with special preparations or soap solutions can be used.

Aggressive exposure to pure acid will damage the coating and loss of visual appeal of the decoration. When using powder or soda, due to the impact of small abrasive particles, scratches may appear and lightened areas may form.

For cleaning, use the following steps:

• prepare a warm soapy solution;
• the decoration is immersed in the liquid for 20 minutes;
• The product is taken out and carefully wiped with a napkin.

You can clean blackened silver using potato solution. To do this, clean the tubers and place them in water. Silver jewelry is placed in the liquid with root vegetables and left for 4-5 hours, after which the products are taken out and wiped.

Source: https://yutvoegodoma.ru/kak-otbelit-serebryanuyu-cepochku-v-domashnix-usloviyax.html

How to bleach a silver chain

Silver jewelry looks very elegant, sophisticated and noble, but it’s no secret that even the highest quality items can darken over time. Sooner or later, every owner of such jewelry thinks about how to bleach a silver chain at home. In this article you will find practical recommendations for eliminating this problem and learn the possible reasons for this “behavior” of silver.

Why does silver darken over time?

Every owner of silver jewelry notices that silver darkens over time. Why does this happen and what is it connected with? Some believe that the cause of such darkening is health problems or the emotional state of a person.

Others are of the opinion that the formation of a dark coating is associated with the properties of the metal itself. Silver contains copper, which oxidizes by reacting with hydrogen sulfide, resulting in the formation of a sulfide deposit, which makes the product darker. However, there is also a type of silver that itself has a dark color.

Find out from our article what blackened silver is to understand how it differs from ordinary silver. 

The main reasons for the darkening of silver:

1. Wet air. Humid air contains large amounts of hydrogen sulfide. Frequent water procedures contribute to the rapid darkening of the metal, and accordingly, if you do not remove jewelry while swimming, the question of how to bleach a silver chain at home will definitely arise in your mind, and quite quickly.
2. Sweat.

   The human body, according to its physiology, produces a certain amount of sweat every day, which depends on the intensity of physical activity. Sweat contains sulfur. No matter what part of your body you wear silver jewelry on, it will eventually tarnish. Since in humans most of the sebaceous glands are located in the chest and neck area, a silver chain will darken much faster than, for example, earrings.

   The latter, by the way, practically do not darken, due to the fact that sweat is very rarely released in the ears.

3. Medical reasons. Some medications contain sulfur compounds, which can be excreted in sweat. If you use such medications, silver can tarnish very quickly.
4. Hormonal background.

   Its changes, for example, during pregnancy, during the maturation of adolescence, when taking very strong hormonal drugs, can also affect the appearance of silver jewelry.

5. Cosmetical tools. Sulfur is often included in creams and cosmetic lotions. Therefore, it happens that the darkening of silver jewelry is caused by frequent use of cosmetics.

   Therefore, in order not to look for an answer to the question of how to bleach a silver chain at home, all jewelry sellers advise removing items made from this metal when you apply any cosmetics - nourishing cream, foundation, cleaning lotions, etc.

Important! It should be noted that the higher the standard of silver, the less it darkens.

How to bleach silver? Cleaning options

What to do if the jewelry has turned black and you need to lighten the silver? There are two possible actions. But before you start, be sure to determine the authenticity of the silver.  

Option #1. Jewelry repair shop

Take tarnished silver jewelry to a workshop. This method is more suitable for jewelry coated with precious stones and containing natural stones such as pearls and amber. The fact is that many precious and semi-precious stones do not tolerate treatment with aggressive agents very well. Therefore, in order not to completely ruin such a product by processing it yourself, it is better to take it to a jeweler for cleaning.

Option #2. Self-cleaning

You can try to lighten silver yourself at home. You can clean products from blackness using special products. These are a variety of pastes, gels, and liquids that are sold in jewelry stores. However, such tools are not always on hand to quickly clean silver. In this case, do not be upset, as you can cope perfectly with the help of available drugs.

How to lighten silver at home?

There are several ways to remove blackness from precious metal. The most common advice involves the use of simple drugs that can be found in everyone’s home.

Important! It is necessary to remember the main rule of cleaning products: before bleaching the metal, you should put the jewelry in warm soapy water for a short time, and then rinse thoroughly.

Mode of application:

1. Prepare a solution of alcohol and water by mixing the components in a ratio of 1:10.
2. Place the product in the solution for 10-15 minutes.
3. After time has passed, carefully wipe the product with a woolen piece of cloth.

Important! Many men like to highlight their look with various accessories, but I can’t decide how to wear jewelry correctly.

To make it easier for you to understand this issue, follow the link where you will read on which hand men wear the chain.

Detergent, salt and soda

This method is suitable for cleaning heavy stains.

Cleaning method:

1. Dissolve one tablespoon of salt, soda, and dishwashing detergent in 1 liter of water. Mix all ingredients thoroughly.

   Important! It is better to use aluminum utensils to prepare the solution.

2. Place silver jewelry in the solution and boil over low heat for half an hour.

“Coca-Cola” or “Sprite”

Well-known drinks loved by many people can be used not only for food purposes. They do an excellent job of cleaning tiles, polishing chrome and removing black deposits from silver.

Dentifrice

You can clean silver using tooth powder or toothpaste.

Useful tips

Lightening silver at home is quite simple, but it is even easier to prevent the appearance of darkened areas. This requires proper care of the products. Here are a few simple rules that will help your jewelry not become covered with a dark coating longer:

• Remove jewelry before swimming in the bath, sea, or shower.
• Do not wear silver jewelry to sports practices, dance classes, or other activities that require increased physical activity.
• If water gets on your silver, immediately wipe it off with a cloth.
• Store the products in a special box in a dry place.
• Remove jewelry when cleaning your home.

Important! Silver jewelry should not be stored near cosmetics or medicines.

Source: https://uborkadoma.guru/myte-vo-vremya-uborki/kak-otbelit-tsepochku-serebryanuyu.html

The effect is obvious: after cleaning using the chosen method, the silver chain will become like new

Silver is a noble metal distinguished by its grace. Jewelry made from it is popular despite its ability to quickly darken. If you know how to clean a silver chain and protect it from tarnishing, the product will delight the eye for a long time.

How to clean blackness from a silver chain

If the item is too dirty, professionals from the jewelry workshop will clean up the blackened jewelry. However, cleaning a silver chain at home is also possible.

There are many methods for cleaning silver. Let's divide them into three groups:

• wet;
• dry;
• mechanical cleaning.

Wet cleaning methods

• Ammonia is indispensable for cleaning silver at home. If you don’t have it on hand, you can buy it cheaply at your nearest pharmacy. Place the darkened product in a container where you have poured ammonia and leave for half an hour. Then rinse the chain with clean water and dry.
• Coca-Cola is an excellent cleanser.

  Proceed similarly to the previous method, increasing the soaking time to 2-3 hours.

• Add a lot of table salt to boiling water (the more, the better). Immerse the silver and leave until it cools completely. Rinse with water and dry using a soft cloth.

Advice! To enhance the effect, dip a piece of foil into the saline solution along with the silver.

Step-by-step instructions for cleaning a silver chain with soda and boiling water with the addition of foil.

• Lighten silver with lemon juice. Squeeze the juice of one fruit into a bowl and place the chain there. Make sure that the liquid covers the entire product. After a quarter of an hour, rinse the jewelry and dry it.
• Try cleaning the silver with a vinegar-salt solution. Pour a tablespoon of sea or simple table salt into 50 ml of 9% table vinegar and mix thoroughly. Let the jewelry simmer for half an hour, rinse and dry.

Important! Methods involving boiling and heating should not be used for items inlaid with stones.

Such chains are cleaned exclusively using “cold methods”.

Baking soda will help when your silver chain has tarnished. It is diluted with water and thoroughly rubbed in with a soft sponge or toothbrush, after which the jewelry is rinsed and wiped dry.

Dry cleaning methods

• Lay the chain on a soft towel, sprinkle generously with tooth powder and rub thoroughly with a soft-bristled brush. Rinse and dry.
• You can clean silver at home with a cloth. To ensure that jewelry made of precious metal always shines and looks like new, it is polished from time to time with a small piece of cloth.

Mechanical cleaning

This involves cleaning silver items with various substances and intense friction. The product is applied to a hard cloth, which is used to rub the jewelry. The more intense the movements, the better the result. They use, for example, vegetable oil, toothpaste, and dishwashing detergent. However, if the surface of the chain is slightly dirty, you can rub it with a paper napkin.

A mechanical method for removing dark deposits from silver is a special GOI paste. Before cleaning the product, read the instructions on the packaging.

There are specialized cleaning products for caring for silver: foams, liquids, pastes, wipes. They are sold in jewelry workshops and stores.

Remember! Special metal cleaning products are not suitable for products decorated with stones and coated with enamel.

So that silver does not darken

In order to encounter the problem of blackening of silver products as little as possible, you need to know the rules for their use.

6 rules of care

There are simple rules for using silver jewelry.

1. Remove the product every time before water procedures (bath, sauna, shower, swimming) and applying cosmetics and perfumes to the neck area.
2. Don't wear silver while playing sports.
3. When you are sick, it is also recommended to remove jewelry.
4. Once every two months, for prevention, clean the products using any of the methods listed above.
5. Wipe your silver with a flannel cloth every day.
6. Store silver jewelry separately from gold jewelry. The box should be upholstered on the inside with soft fabric.

Method of cleansing with toothpaste.

General recommendations

Professionals and experienced housewives give some more useful tips on how to clean a silver chain.

• Before cleaning your silver chain using the chosen method, soak it in warm soapy water for two hours, then scrub with a soft brush. The dirt will be removed and there may be no need for further cleaning.
• When using special pastes and gels to clean silver, remember: a large amount of the product will not increase the chances of restoring its original appearance, but can ruin the product.
• Before cleaning your jewelry with an aggressive product, protect your hands. Just don't use latex or rubber gloves - they contain a lot of sulfur, which causes the silver to darken. An alternative option is nitrile.
• After you have cleaned your silver chain, be sure to dry it thoroughly. Otherwise, the decoration will become covered with streaks and darken faster.
• Do not wear the chain for 2-3 days after you have bleached it. During this time, a protective layer is formed on the product, allowing it to maintain its attractive appearance for as long as possible.

Silver is a rather finicky metal to use. It is important to consider many factors to prevent it from turning black. But even if a dull coating appears on the product over time, you should not be upset, since cleaning a silver chain at home is actually not difficult.

Source: https://HouseSitter.ru/dom/sekrety/kak-pochistit-serebryanuyu-cepochku.html