How to clean gold at home

How to clean gold at home quickly and effectively to make it shine?

How to clean gold at home

Gold products are susceptible to oxidation due to the impurities they contain. From dust and sweat, contact with sebum, and exposure to time, the metal becomes dull in color.

It is possible to renew gold jewelry and return it to its original shine at home using simple and reliable methods for cleaning jewelry. They will help to quickly and effectively remove dirt from rings, bracelets, earrings, and remove darkening and blackness from their surface. Some pieces will need to be cleaned using a long-bristled brush to help clean the grooves and other hard-to-reach areas of your gold jewelry.

Preparing the necessary tools and equipment

There are several ways to remove dirt and grease from metal. Chemical cleaning of gold is carried out using pharmaceutical preparations and cleaning solutions. In mechanical cleaning, a fluffy cloth is used to clean the surface, and the deposits are removed with a brush.

Before starting work, you should prepare a suitable container for the gold jewelry so that the product can easily fit into it and be completely immersed in the gold cleaning solution.

You should have a comfortable brush with long bristles on hand, with which you can easily penetrate the figured links of a chain, bracelet or pendant and clean the indentations from dirt.

Means for cleaning gold jewelry

The effectiveness of the work largely depends on the correct choice of cleaning agent. First of all, you need to determine what composition to clean the product with so that it shines again.

https://www.youtube.com/watch?v=OjKogbTsmxs

To restore the faded shine of gold jewelry at home, you can use the following remedies:

  1. Ammonia.
  2. Dish detergent.
  3. Lime.
  4. Five percent hydrogen peroxide.
  5. Table vinegar or citric acid.
  6. Dentifrice.
  7. Soda.
  8. Sweet water.
  9. Cleansing paste and soft wipes.

The methods below apply to cleaning 14k gold without stones inserted into the product.

Ammonia

You can update the appearance of your jewelry using a proven, simple recipe. List of products included in the cleaning mixture:

  1. Ammonia - 1 tsp.
  2. Clean drinking water - 250 g.
  3. Any washing powder - 1 tbsp. l.

Sequencing:

  1. Pour water into an enamel bowl, place it on the stove, wait until it boils and turn it off.
  2. Add the remaining ingredients to boiling water and mix thoroughly.
  3. Dip the decorations into the resulting mixture and leave for up to three hours - it all depends on how dirty it is.
  4. Take clean water and rinse the gold items in it, then rinse them well with boiling water and place them on a soft cloth for a few minutes to absorb the remaining drops of water.

 Soda

An effective option for cleaning gold is to use baking soda without additional means. If you don’t have enough time to clean gold items, but want to update their appearance, then you can use this method. You need to take:

  1. Hot water - 250 g.
  2. Two tablespoons of baking soda.
  3. Half a teaspoon of dish soap.

Sequencing:

  1. Mix all the ingredients and pour the solution into an enamel bowl, at the bottom of which place a soft napkin with rings, chains and other gold items intended for cleaning.
  2. Place the bowl with the products on low heat and simmer for half an hour.
  3. Cool the solution, rinse the products well and dry for 30-35 minutes.

Detergent

There is another method that restores shine no less effectively and quickly. If the jewelry has darkened, the sparkle of the bracelet, chain, or ring has noticeably faded, then you need to replace the washing powder with a detergent used to wash dishes to remove grease. To complete the task, you must:

  1. Pour 200 g of water into a metal container.
  2. Dilute half a tablespoon of dishwashing detergent in water until foam forms.
  3. Add one teaspoon of ammonia.
  4. Place a soft napkin at the bottom of the enamel container, and place gold objects on top of it.
  5. Pour the prepared cleaning solution over the gold jewelry.
  6. Boil for ten minutes over low heat, remove from heat.
  7. Rinse jewelry in clean water.
  8. Pour boiling water over it, which will instantly dry already clean jewelry.
  9. Wipe the metal surface with a soft cloth to revive the shine.

Lime

You can clean gold jewelry in another way:

  1. Mix one teaspoon of lime, 100 g of water and 2 g of salt.
  2. Let the solution brew for three days.
  3. Immerse gold items with a matte surface into the prepared mixture and leave in the solution for about four hours.
  4. At the end of the process, wash and dry the gold objects.

Vinegar

Vinegar is found in almost every home. Using it, you can add shine and gloss to gold products. This metal is cleaned quickly and easily with vinegar, and the product gives a great shine to rings and rings without embedded stones.

Cleaning is carried out with 9% table vinegar or citric acid diluted in water.

Sequencing:

  1. Pour the required amount of product into a bowl.
  2. Dip gold objects into the solution and keep them there for 30 minutes.
  3. Using a soft brush, carefully, without damaging the surface of the bracelet or ring, clean the items in vinegar, wash and dry.

Dentifrice

Using tooth powder, you can quickly clean jewelry from dust and grease. Sequencing:

  1. Wet a cotton pad and dip it in tooth powder.
  2. cut it in half and rub one side against the other to distribute the product evenly.
  3. Clean the gold carefully, being careful not to scratch the surface.

Foil + soda

Gold can be purified well using the following components:

  1. Foil, which should be placed at the bottom of the container so that it covers the entire bottom. Foil has cleansing properties and helps remove fat deposits.
  2. Two tablespoons of baking soda.
  3. Very hot water.

Sequencing:

  1. Stir baking soda into hot liquid until completely dissolved.
  2. Pour the prepared product onto gold chains, pendants, crosses, bracelets, rings and other things placed on foil in containers.
  3. Leave the items for eight hours to clean.
  4. Carefully remove the gold jewelry from the container, wash and dry with a napkin. A trace of grease will be visible on the foil.

Sweet water

It is possible to return gold rings, bracelets, and crosses to their original appearance and shine by washing the items with a sugar solution. This method is effective in cases where the products have darkened; it cleanses iodine stains well.

https://www.youtube.com/watch?v=H4y4KIX5zHw

You will need 200 g of water and two tablespoons of granulated sugar.

Sequencing:

  1. Mix the ingredients.
  2. Dip gold items into the mixture and leave for eight hours.
  3. After cleaning, place the product in clean water, rinse well and wipe with a soft cloth.

Instant cleaning

A composition containing the following components will help you quickly clean gold so that it shines:

  1. One glass of warm water.
  2. A teaspoon of liquid soap.
  3. Hydrogen peroxide - 40 g.
  4. Ammonia or ammonia solution - one teaspoon.

When mixing the components, liquid soap reacts with hydrogen peroxide. The result is an instant cleaning solution. With the help of ammonia in the composition of the product, the radiance of gold is restored.

Sequencing:

  1. Combine all substances in one container and mix well. When adding peroxide, foam and the characteristic hissing sound of hydrogen peroxide should appear.
  2. Place the prepared jewelry into the composition and leave for thirty minutes.
  3. At the end of the procedure, rinse the gold thoroughly in clean water and place on a napkin to dry.

Mechanical cleaning

In cases where the above methods do not bring the expected effect, it is recommended to subject the products to mechanical cleaning. When working, do not use soda or other abrasive materials that leave scratches on gold jewelry.

For care, you should use a special paste that is safe for jewelry. Apply the product to the surface of gold bracelets, rings, chains only from left to right or vice versa, without changing direction. After cleaning, you must use an alcohol-containing solution to wipe the jewelry to remove any film that has formed on the surface.

Cleansing paste can be prepared at home. To clean gold you will need the same amount:

  1. Vaseline.
  2. Finely grated laundry soap.
  3. Heated water.
  4. Toothpaste or crushed chalk.

Sequencing:

  1. Mix all ingredients.
  2. Apply the solution to jewelry items using a soft toothbrush in one direction.
  3. After cleaning, thoroughly wipe the gold items with a composition that contains alcohol and pour over boiling water to dry.

You can remove tarnish from the surface of gold with an eraser.

Products with stones

Jewelry with stones should be cleaned by wiping with a solution that contains alcohol. For cleaning, use brushes with soft bristles - they will not damage expensive inserts. If the stones are synthetic, then you can wash off the solution with ammonia, if natural - only with clean water.

Products should be cleaned with cotton swabs soaked in gasoline or cologne. These solutions do not leave scratches on the sanded surface. The stones must be carefully rubbed with a cloth until shiny and dried. Gemstones glued to the base should not be immersed in water; they may come off.

White gold cleaning

White gold must be treated with great care and caution, and should be cleaned without using brushes, rough lint cloths or abrasives, the use of which will lead to destruction of the surface. There are proven methods for purifying precious metal.

A ring or other item with a matte surface can be kept in an ammonia solution for up to two hours. Then rinse with clean water and dry.

To effectively clean products and restore their shine, you can prepare a mixture of egg whites and beer foam:

  1. Separate the egg white and place it in a cup.
  2. Pour two tablespoons of warm beer into it.
  3. Mix the composition until smooth.

Cleaning sequence:

  1. Using a napkin or cotton pad, apply the liquid to white gold items from the inside and outside.
  2. Rinse the jewelry to remove any remaining mixture with cold water and place it on a napkin.
  3. Dry until completely dry, otherwise unwanted stains will appear.
  4. If necessary, repeat the procedure a second time to make the shine brighter.

Any mechanical impact on white gold is prohibited.

Source: https://svekrovi.net/cleaning-things/metal/kak-pochistit-zoloto-v-domashnix-usloviyax.html

How to clean gold at home quickly and efficiently?

How to clean gold at home

Good day, my dears! Today we will clean gold jewelry very quickly and efficiently. At the same time, you do not need expensive tools and ingredients - everything can be easily done at home using improvised materials.

Very often I see on the Internet how they sell an ultrasonic cleaner for jewelry. This is a compact device that is used at home or in workshops. To be honest, I had one and didn’t see any good results from it.

Therefore, today I am publishing for you only effective and quick ways to clean gold and silver using common products that can be found in any home. After them, the jewelry shines like new!

How to clean gold with stones at home quickly and efficiently?

When you have jewelry with stones, you need to clean it very carefully so as not to scratch it. One such good method is a solution of peroxide, boric acid and ammonia. So let's get started.

Dissolve one teaspoon each of hydrogen peroxide, boric acid and ammonia in a small amount of water. Mix the solution thoroughly.

Soak gold jewelry with stones for 30 minutes.

Rinse them thoroughly in clean running water and wipe with a dry soft cloth, such as flannel.

How to quickly and effectively clean gold and silver using baking soda and foil?

This method is equally good for both silver and gold. Jewelry becomes clean and sparkling in just 5 minutes!

Line a plastic container with baking foil. We place gold and silver jewelry without stones there and cover them with soda. Pour boiling water over and leave for 5 minutes.

Clean white gold at home to make it shine

White gold is a very beautiful metal. And it also needs regular cleaning. After all, on it, like on silver, tarnish and dirt are immediately noticeable.

We tear the food foil into small pieces and throw them into a pan of water, bring to a boil, then add baking soda.

As soon as the reaction begins, string the white gold jewelry onto a thin rope and lower it into a pan with foil for a few seconds. Let's take out the jewelry and rejoice in its shine!

about how to quickly and effectively clean gold using ammonia

You don't need special cleaning products. It is enough to buy ammonium hydroxide (ammonia) at the pharmacy and mix it with any detergent (washing powder, dishwashing detergent, liquid soap, etc.).

To prepare the solution, take:

  • 1 glass of water
  • 1 tablespoon detergent
  • 1 teaspoon of ammonia

Source: https://vdekrete.info/kak-pochistit-zoloto.html

How to clean gold at home

How to clean gold at home

Gold items are not cheap, so you always want to see them in perfect condition. But, alas, dust, dirt, plaque, one way or another, cover expensive jewelry, which is why gold ceases to look noble. To prevent this from happening, you need to know how to clean gold at home. They carry out this procedure on their own, if necessary, when there is no opportunity or time to take the gold to a jeweler for professional cleaning.

Gold cleaning products

The easiest way to quickly clean gold or gold-plated items is to use special products designed specifically for this purpose. They can be purchased at hardware stores, online or from jewelers.

Goldbad – a product for cleaning any jewelry made of gold and even gilding

  • Goldbad is a product for any jewelry made of gold and even gilding. Cleaning is carried out within 20 seconds. In this short time, the metal is completely cleaned, acquiring its pristine beauty, shine, and attractiveness.
  • C onnoisseurs is a preparation that can clean gold items well. It removes dirt and stains so that the gold shines like it came straight from a store. However, it should not be chosen for jewelry with coral or pearls.
  • Shin Coins is a substance without chlorine, ammonia and other aggressive components. It is suitable for jewelry and gold products, but is not suitable if there are inserts of “soft” stones (Mohs hardness below 5).
  • Flurin is a chemical liquid. Products are simply immersed in it to clean, that is, much effort is not required.
  • Aladdin is a mixture based on ammonia. It restores lost shine and removes dirt in just 20 minutes of scrubbing.

Use the substances described above only according to the instructions. In this case, the drug will act effectively and will not harm the valuable metal.

Interesting!

Cleaning gold is most often done with a soft cloth, but in hard-to-reach places on the product you simply cannot do without a small, soft brush!

How to Clean Gold Effectively

In jewelry stores, special products are used to clean gold. They come in different types and, if desired, some of them can be purchased and used at home, but why, if you can use improvised means. The so-called “grandmother’s” methods have been used for a long time not only at home, but also by jewelers, for lack of an alternative. They clean jewelry effectively and quickly if done correctly.

  • Take 100 g of onions and potatoes. They need to be cleaned and crushed in a blender. The juice is squeezed out of the resulting pulp, and gold is placed in the pulp for 60 minutes. When the specified time has passed, you need to wash the gold under the tap and dry it.
  • Onions can quickly remove dirt from gold. One small head is cut, gold is rubbed with the cut of the onion and left for 15-30 minutes. During this period, the onion juice will clean the metal and you just need to wash it under the tap.
  • Dark deposits from precious metal can be removed with a mixture of water and salt. For half a glass of water, take 45 g of salt. When it dissolves, gold is placed in the liquid for 3-5 hours.
THIS IS INTERESTING:  How to clean stainless steel until it shines

Household dirt can be removed from gold with a napkin soaked in a weak solution of boric acid

Interesting!

Household dirt can be removed from precious metal with a weak solution of boric acid. They moisten a soft cloth with it and wipe the products, then wash them under the tap and dry them.

  • You can also clean precious metal with peroxide, but this method requires precision. 1 tsp. soap is dissolved in 250 ml of water, add 2 tsp. ammonia and 2 tbsp. l. peroxide (3%). Gold is left in this mixture for 10-60 minutes (based on the abundance of contamination). This solution cleanses gold of the most severe contaminants and restores its shine.
  • Baking soda can also remove dirt. 1 tbsp. l. soda is diluted in a glass of water. Foil is placed at the bottom of a small saucepan, gold items are placed on it, filled with soda liquid and left for a day. After soaking, the metal is washed and rubbed with a cloth. But, if you don’t have time to wait a day, you can put this pan on the fire and keep it there for only a quarter of an hour. Then it is cooled, taken out and washed with gold.
  • The matte coating on gold can be removed with egg and beer. In a bowl, beat one egg white and a glass of beer into a stiff foam. Gold is placed in it for a quarter of an hour.

Important!

Cleaning gold with a bow is effective, but only those items that do not contain stones are cleaned this way. Since onion juice can negatively affect the state of some minerals.

Dissolve 15 g of sugar in a cup of water and put the gold item there for 9 hours

Cleaning gold to make it shine

The glitter of gold attracts attention. While the product is new, just from the store, it shines very beautifully, has a natural color, without darkening. But as you wear it, the shine disappears. How to clean gold at home to make it shine again:

  • 15 g of sugar is dissolved in a cup of water. The gold item is placed in this syrup for 9 hours and then washed with running water. This procedure will return the natural shine to gold.
  • A simple Coca-Cola will also help restore the natural beauty of the precious metal. To do this, the drink is poured into a glass and gold is dipped into it. It should be completely covered so that it does not show through. After 9-10 hours, the jewelry is taken out, washed under clean water and dried.

Important!

Gold is much stronger than silver, but regardless of this, it is cleaned only with soft brushes, as hard ones can leave scratches on the products.

In order for gold, which is often worn, to always be clean and shiny, it must be cleaned at home at least once every 2 months.

Gold should only be cleaned with soft brushes, as hard ones can leave scratches on the products.

How to clean white gold

White gold is more susceptible to scratches, so it should be cleaned more carefully. To begin with, it is not recommended to use hard brushes or rough cloth, which can leave scratches. Only the mildest cleaning solutions and materials are used. So, how to clean gold at home if it is white:

  • Dissolve 10 ml of ammonia in plain water and dip gold items in it for 5-10 minutes. After the specified time, they are taken out and wiped with a soft cloth with lint. It is very important to remove all moisture from the metal as it can negatively affect the decoration.
  • 2 tablespoons of beer are mixed with one yolk of a chicken egg. Once the mixture is smooth, apply it to a soft cloth and simply pick out the white gold where there is dirt. If the stains are larger or older, it is recommended to simply apply the liquid to the metal and leave for a quarter of an hour. After this, the gold products are washed, dried and rubbed.

White gold is more susceptible to scratches, so it should be cleaned more carefully

White gold is more difficult to clean than any other type. To ensure that such a product shines and is always clean, only high-quality, freshly prepared products and soft brushes and cloths are used to clean it.

How to clean matte gold

Matte gold is now in fashion, but in order for such a product not to lose its attractiveness, it is necessary to clean it properly.

  • Mix a tablespoon of water and the same amount of lime in a bowl. Then add a pinch of salt, half a teaspoon of soda and leave the mixture for three days. Place matte gold jewelry into the prepared mixture and leave for 3-4 hours, then wash with water and wipe with a flannel cloth.
  • If there are no stones on the precious, matte jewelry, you can clean it with 25% ammonia mixed with water (1 teaspoon per glass of water). The gold is soaked in the solution for 2 hours, then rinsed and wiped dry with a fleece cloth.

Important!

Gold earrings with pearls or other items should not be washed with vinegar, as the mineral can simply dissolve in this acid.

After cleaning, matte gold does not need to be rubbed too much

After cleaning matte gold, do not rub it too much. After all, this procedure over time can lead to the fact that the surface of the metal becomes glossy and shiny.

Cleaning gold jewelry with minerals

Gold items often contain jewelry stones. They come in different orders, values, and with certain characteristics. Some of these minerals can be cleaned with almost any means - they are strong. But there are also minerals that deteriorate even from weak solutions with peroxide, soda or similar seemingly safe components. In this case, you must carefully choose the method of cleaning your jewelry.

  • Gold items with zirconium, cubic zirconia, and diamonds can be cleaned in an ammonia mixture. Add 5 ml of dishwashing detergent and 15 ml of 25% ammonia to a glass of hot water. The gold is soaked in this mixture for up to 120 minutes, then washed and rubbed with a flannel cloth.
  • It is easy to restore the beauty of gold with minerals in liquid soap. First of all, the product is placed in soapy water (a cup of water and 5 mg of grated soap) for half an hour. Then wash the metal and wipe it off with a cloth. This option is ideal for caring for products with topazes, diamonds, and rubies. If you need to clean gold quickly, simply boil it in this soap solution for up to 3 minutes and only then wash and dry it.
  • Products made of gold with turquoise or coral are cleaned with an alcohol solution.
  • Gasoline is also good at removing gold. If a product with stones is placed in it for half an hour, and then washed and rubbed, it will become bright and shiny again.

When cleaning gold items with stones, first wipe off the minerals with a soft cloth, and then use a soft brush to clean the frame itself.

Important!

Minerals with a hardness below 5 on the Mohs scale cannot be cleaned with vinegar, ammonia or any alkaline cleaners. When exposed to them, there is a high chance that the stone will simply become dull or damaged.

Gold is not cheap, so caring for it properly is very important. How to clean gold at home needs to be decided, taking into account the type of this precious metal, whether there are minerals or other inserts on it. But in any case, home cleaning cannot replace professional cleaning. Therefore, once every few years, it is recommended to take gold jewelry to a jeweler so that he can inspect the products, identify and correct possible defects, and also clean and polish the gold to a shine!

Source: https://sapfira.net/kak-pochistit-zoloto-v-domashnih-usloviyah.html

Did you like the article ? Follow our channel for new ideas of useful car tips. Subscribe to us in Yandex.Zen. Subscribe

Gold products will never lose popularity and relevance, especially these days. Gold jewelry is beautiful when it shines, this makes it more expensive. But over time, all jewelry fades, losing all its attractiveness.

Jewelry stores are equipped with special devices where you can clean gold using grinding and ultrasound. It is also possible to restore the original shine at home, without turning to the experts.

How to clean gold yourself efficiently and quickly?

How to clean gold

There are several ways you can clean gold items at home:

  • Mechanical cleaning. This is not a gentle method; they resort to it if contaminants are not removed by other means. The main thing here is to be careful, otherwise the precious metal will be damaged.
  • Polishing. For the work, improvised means are used. This will help restore the expensive shine to the jewelry.
  • Soak. The product is placed in a special liquid, you can make it yourself. All components can be found in the kitchen, medicine cabinet, or among cleaning products.

Boiling gold with soda

This is an easy option that is available to everyone. The decoration must be boiled in water with the addition of soda. Gold should not be thrown into boiling water, but rather the water and metal should be heated at the same time. Soda is added immediately. For 200 ml of water add 1 tbsp. spoon of soda. You need to boil for 3-4 minutes. After the decoration is removed and cleaned with a brush, you can use a toothbrush. The gold is rinsed and dried on a towel without additional heat.

There is a popular belief that gold can be cleaned efficiently by rubbing soda and vinegar. But such processes will only damage the precious metal with scratches, and it will be impossible to correct the errors. Of course, acetic acid will not damage high quality gold, but the alloy is extremely vulnerable. Vinegar is also harmful for products with natural stones. Even if no damage is noticeable during cleaning, it may appear later. Because acid fumes cause no less harm.

Cleaning gold jewelry with hydrogen peroxide

Hydrogen peroxide can clean metal harmlessly and effectively. There are two ways:

  1. The cotton wool is soaked in the liquid. The gold is rubbed until the original shine appears.
  2. Prepare a solution: 200 ml of water at room temperature, 1 teaspoon of liquid soap, 1 teaspoon of ammonia, 45 ml of hydrogen peroxide. All components are mixed until smooth. Gold is immersed in the prepared solution for half an hour. Then the decoration is washed under running water and dried.

Cleaning with foil

This is a fairly effective cleaning of gold items. 250 ml of warm water is poured into a deep plate. Add 2 teaspoons of soda and mix the water. The bottom of the plate is lined with a sheet of foil on which the products are placed. They need to be left for a long time, the minimum is 7 hours, and the maximum is 24 hours. The gold is washed and dried.

Source: https://openoblokah.ru/svoimi-rukami/kak-pochistit-zoloto-v-domashnih-usloviyah

How to clean gold at home - 17 effective and quick ways

Over time, gold accessories can become covered with a cloudy coating, darken, and lose their former shine and attractiveness. We invite you to get acquainted with the most popular and effective ways to remove dirt from the surface of jewelry at home.

Yellow gold

After a few years, yellow gold jewelry becomes dull. The classic variation of the noble metal is characterized by natural resistance to many substances, so to give a natural shine, you can use any abrasive compositions that are instantly effective.

Granulated sugar

You need to take:

  • granulated sugar - 2 tbsp;
  • lemon juice - 1 tsp;
  • water - 250 ml.

Stir sugar in a glass of water at room temperature, add a small amount of freshly squeezed lemon juice. Bring the ingredients until completely dissolved. Dip the gold into this composition, waiting 5-7 hours. Then rinse under running water and let dry naturally, laying on a soft cotton towel.

Dishwashing liquid

You will need:

  • detergent - 1 tbsp;
  • water - 200 ml.

Pour cold water into a small enamel pan, add a tablespoon of dishwashing gel, and place the jewelry. Bring the resulting mass to a boil over low heat. Cool. Then rinse the jewelry under the tap.

washing with a good dish soap is one of the options for quickly cleaning gold items

Petrolatum

Required components:

  • Vaseline - 1 tbsp;
  • chalk - 50 gr.;
  • white toothpaste without additives - 1 tsp;
  • water - 50 ml.

Grind the chalk and mix with warm water at room temperature. Add water and Vaseline. Bring the mixture until smooth. Place accessories in it for 4-5 hours. Rinse with water.

Hydrogen peroxide

Components of the solution:

  • hydrogen peroxide - 50 ml;
  • dishwashing liquid - 2 tsp;
  • ammonia - ½ tsp;
  • water - 250 ml.

In a glass of hot water (55-60 C), mix dish gel, ammonia and hydrogen peroxide. Dilute the components until completely dissolved. Dip the jewelry into the prepared mixture, waiting 30-40 minutes. Then rinse under the tap and dry with a soft cloth.

Salt

You will need:

  • table salt - 100 gr.;
  • water - 200 ml.

Bring water to a boil, add salt. Dip the decoration into the hot “brine”, leaving it for 7-8 hours. Then rinse and dry.

Toothpaste

Apply a small amount of peppermint toothpaste to your brush. Using circular, smooth movements, clean the product until the original shine appears. Then rinse under cold water and dry.

Food foil

You will need:

  • aluminum foil - a piece of 30x20 cm;
  • baking soda - 60 g;
  • water - 500 ml.

Take a wide glass container and line the bottom with foil. Pour 2 cups of boiling water, add a little soda. Stir. Immerse the gold and leave for 10-15 hours. Rinse in cold water and pat dry with paper towel.

Lipstick

Carefully apply lipstick to the jewelry and wait 2-3 hours. Then wipe everything with a soft cloth soaked in cold water.

You can clean gold jewelry with folk remedies (ammonium or peroxide), and if they don’t help, resort to stronger store-bought products

Matte gold

The unusual matte surface of jewelry is achieved through the use of a special polishing method. To remove plaque and dirt from such jewelry, a simple soaking in a 25% ammonia solution is sufficient. The use of abrasive and powdery substances is not permitted.

White gold

The composition of the white gold alloy contains: platinum, silver, palladium, therefore, unlike the yellow metal, it darkens or turns black when reacting with the air or any other oxidizing agents. It cannot be cleaned using even the “weakest” abrasive powders, or with a regular toothbrush, to avoid damaging the “fragile” coating.

THIS IS INTERESTING:  How to clean spoons and forks with foil

Shower gel

You need to take:

  • shower gel - 2 tbsp;
  • ammonia - 1 tsp;
  • water - 200 ml.

Combine ammonia, any shower gel and warm water at room temperature. Mix thoroughly. Place the gold item in the resulting solution and leave for 30-35 minutes. Then rinse under the tap and dry using a soft cloth.

Laundry soap

Ingredients:

  • laundry soap - 100 gr.;
  • water - 250 ml.

Grate the soap on a coarse grater. Dissolve in hot water (50-60 C) until thick foam forms. Lather the jewelry with the resulting solution, wait 3-4 hours, then rinse in cold boiling water and dry.

Onion

Peel the onion. Grind the pulp to a puree using a blender or meat grinder. Rub the prepared onion pulp onto the contaminated areas, leave for 5-10 minutes, and rinse under the tap.

Chalk

Required components:

  • chalk - 100 gr.;
  • cream soap - 1 tbsp;
  • water - 150 ml.

Grind the chalk in a ceramic mortar until it becomes powdery. Pour in hot water (60 sec), add liquid soap. Mix thoroughly. Apply the product to a foam sponge and wipe the blackened areas of the product with smooth movements. Then rinse and dry.

With shampoo

Ingredients:

  • shampoo - 2 tbsp;
  • water - 50 ml.

Dissolve the shampoo in hot water (50-60 C) until thick foam forms. Use the resulting product to rinse off the stains.

With rocks

When cleaning jewelry with precious or semi-precious stones, give preference to neutral or slightly alkaline solutions without coarse components, use a cloth or cotton swab.

The following recipes are universal: suitable for cleaning hard (diamond, jade, diamond, ruby, emerald) and soft (opal, turquoise, serpentine, malachite) rocks.

The exception in this case is pearls - do not use vodka or alcohol to care for them to avoid corroding the surface.

Vodka

You will need:

  • vodka - ½ glass;
  • liquid soap - 2 tbsp;
  • water - 100 ml.

Mix vodka, hot boiling water (55-60 C) and liquid soap. Dip gold jewelry into the resulting solution. Leave for 4-5 hours. Wipe with a cotton swab dipped in clean (preferably distilled) cold water.

Beer

You will need:

  • light beer - 150 ml;
  • egg white - 1 pc.

Using a blender or mixer, combine beer and egg white. Bring the mixture until smooth. Soak a flannel cloth in the solution and thoroughly wipe the contaminated areas, including the gemstone.

Potato

You need to take:

  • potatoes - 1 pc.;
  • starch - 1 tbsp;
  • water - 150 ml.

Grate the peeled potatoes on a fine grater. Mix with starch and warm water at room temperature. Place the products in the resulting slurry for several hours. Rinse under the tap.

Purchased funds

Let's consider universal professional cleaning compositions that can be used at home. The most popular:

  • Aladdin;
  • Talisman;
  • HG;
  • Flat;
  • Unicum;
  • Cleaner.

Gold jewelry requires careful handling and early quality care. Having studied the effective and quick ways to combat pollution described above, you will be able to make the right choice in favor of the most suitable product for you.

Source: https://mixfacts.ru/articles/kak-pochistit-zoloto-v-domashnih-usloviyah-17-effektivnyh

How to clean gold at home until it shines using improvised means: soda, peroxide, toothpaste

We girls undoubtedly like gold jewelry. Even if massive rings and impressive bracelets are not what you would like to have in your collection, you definitely have a couple of your favorite precious metal jewelry in the box! But over time they fade and become covered with a slight patina. Common situation? How could it be otherwise: every day there is cleaning, washing, cooking. There is a need to clean the gold in order to restore its original shine.

You can contact a jewelry workshop that provides such services. However, a busy mother often does not have time for trips that do not coincide with the daily route. It is much easier, cheaper and faster to purify gold at home! There are many ways, and they are very simple.

Important! The methods below are suitable for cleaning jewelry without gemstones. Some active components of the products used can cause the gems to fade.

Cleaning gold using dishwashing liquid

You can clean gold with the help that is found in every home. Take a regular metal ladle and pour a glass of water into it. Add detergent and place jewelry in the resulting solution. Place the dishes on the fire, bring the water to a boil and keep on medium heat for about 10 minutes. After this, wait until everything has cooled down, rinse the jewelry under running water and dry with a soft cloth.

How to clean gold with ammonia or washing powder

To clean gold at home, you can use ammonia and washing powder. Surfactants contained in the powder will perfectly cope with contamination, and ammonia will add shine to jewelry.

For 200 ml of hot water you will need 1 tablespoon of detergent and 5 ml (teaspoon) of ammonia. Stir the solution until the ingredients are completely dissolved, place the gold items in a bowl of liquid and leave them for 2 hours. After cleaning, rinse the jewelry under running water and wipe with a napkin.

Good results can be achieved by cleaning gold with hydrogen peroxide. This substance can be used in combination with various ingredients.

  1. Recipe 1. Pour a glass of warm water into a glass or plastic bowl, add 5 ml of ammonia, 3% hydrogen peroxide and liquid laundry soap. Mix and add jewelry to the resulting mixture. After about 20 minutes, the jewelry will sparkle like new. In order to clean gold in this way, you need to spend very little time.
  2. Recipe 2. You can clean gold at home quickly and easily using hydrogen peroxide in combination with baking soda. Dissolve 5-10 ml (depending on the degree of contamination) of 3% hydrogen peroxide and 2 tablespoons of baking soda in boiling water. Place jewelry in this water for 10 minutes. Then rinse and wipe dry.

How to clean gold with regular salt

You can clean gold using regular table salt. Under no circumstances should you rub your jewelry. Hard crystals can scratch the surface of the jewelry, and then only polishing will help.

Pour 150 ml of boiling water into a glass or plastic container and dissolve 60 ml of salt in it. Stir until the product is completely dissolved. In order for the jewelry to be completely cleaned, you should keep it in the solution for 8-10 hours. Finally, rinse with cold water and remove moisture with a tissue.

Another interesting way: cleaning gold with foil

Any of the home methods for cleaning gold is effective. You can choose based only on the availability of certain funds at hand. And here's another recipe. Place aluminum foil on the bottom of a deep bowl. Pour 500 ml of hot water into a container and dissolve 50 g of regular soda in it. The exposure time for jewelry in the resulting liquid is 8-10 hours. As usual, rinse them and dry them.

There are times when there is no time to find the necessary ingredients and start a long procedure. For example, you urgently need to clean the gold before going out. For this case, you always have toothpaste on hand.

As a tool, you can use an old toothbrush or a soft cloth if the decoration is smooth. Simply cover the entire surface of the product with paste and rub with the chosen tool. After rinsing and drying, the gold will regain its shine.

If the decoration has a complex design, check that there are no paste residues in the corners and holes. This method can be used to clean jewelry with stones.

Simple methods of home cleaning will not be difficult, and they will not require any special expenses either. The situation is similar with the purification of silver from blackness. Take good care of your jewelry and it will thank you with its everlasting shine! And if the article was useful to you, share the tips with your friends!

Source: https://super-mother.com.ua/kak-pochistit-zoloto-v-domashnih-usloviyah/

How to clean with ammonia and regular washing powder

This simple recipe will help restore your product to its original appearance, without the additional use of special products.

Components included:

  • 1 tsp ammonia alcohol;
  • 250 ml. water;
  • 1 tbsp. washing powder.

Bring the water to a boil, add the remaining ingredients and mix well. Place the products in the resulting composition for about three hours, depending on the contamination. Then be sure to rinse with clean water and wipe the product dry with a soft cloth.

Instead of washing powder, you can use dishwashing detergent, which also does the job just as effectively.

How to clean with dishwashing detergent

This method also copes with the task no less effectively.

Ingredients you need for your work:

  • 1 tsp dishwashing detergent;
  • 1 glass of water.

To use, completely dissolve the product in water. Place a soft napkin at the bottom of the container, place the decorations in the container and fill with the prepared solution. Now boil everything for about ten minutes. Then dry the product with a napkin.

  How to clean cupronickel at home: rules and recommendations

How to clean with liquid soap, hydrogen peroxide and ammonia

Components you will need:

  • 1 tsp liquid soap;
  • 40 ml. hydrogen peroxide;
  • 250 ml. water;
  • 1 tsp ammonia or ammonia solution.

All components must be combined, pour in the gold items and leave for about 20-25 minutes. After the procedure, gold products need to be dried with a napkin.

Clean with salt

How else can you clean gold? Every home has regular salt that does this job well. To work you will need salt and water. Combine these two components in a proportion of 125 ml. water and 3 tbsp. spoons of salt, mix everything. Place gold jewelry in the solution and leave for 10 hours. After the procedure, rinse the products with clean water and dry with a soft cloth.

Clean with foil and baking soda

You can clean gold using foil. For these simple manipulations you will need the following components:

  • 2 tbsp. l. soda;
  • 250 ml. hot water;
  • Foil.

Combine the first two components. Place foil and gold on the bottom of the dish and fill with the prepared product, leave for 9-10 hours. Then rinse carefully and dry with a napkin.

Clean with sugar

You can clean gold at home using sugar. This simple remedy will help restore the original appearance of your jewelry. To work you will need the following components:

  • 250 ml. water;
  • 2 tbsp. l. Sahara.

Mix both components and place gold in the solution. Leave for 9-10 hours. After surgery, rinse the items in water and dry.

Clean with soda

The methods described above, for the most part, take a lot of time. If you don’t have one, we offer you another equally effective option for cleaning gold, and the procedure itself will take you no more than 30-35 minutes. To work you will need the following components:

  • 0.5 tsp. dishwashing detergents;
  • 1.5 tbsp. l. soda;
  • 250ml. hot water.

Mix all the components in one bowl, put a soft cloth on the bottom, and on it the jewelry that needs to be cleaned, fill everything with the resulting solution. Place everything on low heat, slightly heating, and boil for 20-25 minutes. When the solution has cooled, rinse the gold in water and dry.

Clean with vinegar

How to clean gold so it shines ? To add shine and shine to gold, you can use regular vinegar. For work, we use 9% table vinegar, which we pour into a container and place the gold product in it, leaving it for 25-30 minutes. Then the gold needs to be cleaned with a soft-bristled toothbrush. After the procedure, the product must be rinsed under clean water and dried with a napkin.

  How to wash Thinsulate: rules and care recommendations

Note! This cleaning option is not suitable for working with products containing stones.

Cleaning white gold

A special alloy of copper, nickel and gold forms a compound called white gold. The surface of this metal is coated with rhodium, therefore it is most susceptible to mechanical stress, and not all methods listed earlier are suitable for working with white gold. Metal cleaning can be done using a soft cloth.

You can clean metal using the method described above with ammonia. Just reduce the exposure time to 55-60 minutes. Do not leave gold items wet under any circumstances, as this may have a negative effect on the metal.

Attention!!! To clean white gold products, you cannot use various pastes used under mechanical influence.

To work with this metal you can use the following composition:

  • 2 tbsp. l. beer;
  • 1 egg yolk.

Mix everything well and lubricate the product with a napkin. Use gentle movements to clean the gold.

Cleaning gold jewelry with stones

The question of how to clean gold with stones deserves special attention . The most important assistant for you will be an alcohol-containing solution. They need to wipe the product, then rinse with clean water and dry with a napkin.

Please note that this method is suitable if you decide to clean gold and diamonds. In addition, the product can be rubbed with ammonia and washed in soapy water. Diamonds can be cleaned with a brush; this will not cause any harm to them.

For work, you can use cotton swabs.

  How to arrange a small hallway

Also, to clean gold with stones, in addition to an alcohol solution, you can use:

Using one of the listed products, apply to the product with a cloth or brush, rub it carefully, and dry.

Do not use sharp objects that can damage the surface!

Pay attention to the method of attaching the stones; if it is glue, then immersing the products in water is not recommended.

Cleaning gold jewelry with a matte surface

Recently, matte gold has been gaining popularity. However, such metal requires the most gentle and delicate care. Do not use brushes, rough cloths, or abrasives; all this can destroy the surface. We suggest you clean metal in the following ways:

  • Place the product in an ammonia solution for about two hours. Then rinse in water and dry;
  • Make a mixture of 1 tsp. lime and water, add salt on the tip of a knife and 0.5 tsp. soda Let the solution sit for 3-4 days. Then we immerse the products in it for 4 hours. After the procedure, we wash and dry the gold.

We have listed many options for cleaning products, but in order for them to serve you longer, you need to carefully care for them and monitor their condition.

Traditional methods of purifying gold

In conclusion, here are several ways to purify gold according to folk recipes:

  • Instead of paste, you can use tooth powder, which is applied to the product with a brush. This option is suitable for cleaning the product from black spots.
  • Mix chalk with ammonia, apply the mixture to the product, clean it well, then rinse and dry.
  • Gently apply vinegar to the item, wipe and dry.
  • Try cleaning gold with lipstick. Apply a little of it to the fabric and wipe the product. Then the gold needs to be polished using a velvet cloth.
  • Squeeze the juice from the onion and rub it on the gold. Be sure to rinse the product under clean water after processing. Dry.

All of the above methods are good for cleaning gold items, however, do not forget the most important rule - proper storage of items. Then they will always delight you with their brilliance and unsurpassed beauty.

THIS IS INTERESTING:  How to sharpen a hammer drill

Source: https://LadyPlace.ru/home/kak-pochistit-zoloto.html

How to properly clean gold jewelry at home

If your favorite ring has stopped sparkling or the diamonds in your earrings aren't sparkling, then it's time to clean your jewelry. Jewelry salons and workshops provide such services, but this can also be done at home. However, gold is a soft metal, so no abrasive pastes or powders can be used, and stones and pearls will fall out or become damaged if not properly cleaned.

Pre-cleaning

Gold jewelry becomes dull and stained over time. Although the surface is smooth, under a microscope micro-irregularities are visible, which become clogged with sebum and dust. Chains and places near stones are especially susceptible to such contamination.

Jewelry does not use pure gold, but its alloy with copper, silver, platinum, nickel, and palladium in various proportions. It is these metals that give the product strength and determine its color, but they oxidize, so the surface becomes dull.

Soap solution removes surface contaminants

You can clean jewelry from surface dirt by washing it in a hot soapy (shampoo, liquid soap, powder) solution: immerse the jewelry and leave for two hours. During this time, the dirt will peel off and then you can remove it with a toothbrush, and rinse the jewelry in running water and wipe with a soft cloth. For those things that are often used, it is recommended to carry out this procedure once a month. If stains remain, additional cleaning should be done.

Important! If the stones in the jewelry are glued, then this procedure cannot be carried out. They may fall off due to moisture. For the same reason, earrings and rings should be removed before washing your hands or head.

If there are no stones

After the jewelry is washed from dirt, you need to remove the oxide film and add shine. There are many things you can use to clean gold: salt, peroxide, ammonia, soda, even beer and onions will help. A cleaning solution or slurry is made from the ingredients specified in the recipe. The products are dipped in liquid or coated with paste and kept for the time specified in the recipe. After any cleaning procedure, they must be rinsed and wiped dry.

After any cleaning, the jewelry must be polished with a soft cloth.

Chemical cleaning

Solutions based on ammonia, peroxide, salt and sugar cope well with stains. The basis of all recipes is a glass of boiling water, to which add:

  • 50 ml of peroxide, 20 ml of alcohol and a drop of liquid soap, hold for 20 minutes;
  • a teaspoon of ammonia, a tablespoon of powder, exposure time is two hours;
  • 30 ml of peroxide, a teaspoon of ammonia, half a teaspoon of dishwashing detergent, hold for no more than 15 minutes;
  • 50 gr. mix soda with boiling water, leave the products until the solution cools, it is also suitable for storing them;
  • 2 tablespoons of sugar or 6 tablespoons of salt - after 12 hours of exposure, the jewelry will sparkle like new.

Read also: how to organize jewelry storage

Melamine sponge

For complex stains: paint, resin, polymer clay, etc. It is advisable to use a melamine sponge. Gold is a soft metal, so as not to scratch it, the product is cleaned very carefully, barely touching the spot with the corner of a sponge. How to use a melamine sponge and what you can clean with it besides jewelry, read the link.

Peculiarities

White gold is more susceptible to damage than traditional yellow gold, so it should not be cleaned with products containing abrasives or with hard brushes. As a detergent, ammonia diluted in half with water and a mixture of protein and beer are allowed. A 25% ammonia solution will carefully clean the rhodium plating from grease.

How to clean a gold ring with a matte finish without damaging the delicate finish? Only with a solution of ammonia or ammonia using a soft cloth - no brushes!

Gilding is a thin foil that is used to cover jewelry alloy products. Cleaning is carried out using a cotton pad soaked in alcohol or a mixture of protein and beer. You can also soak it in 9% vinegar for 30 minutes, rinse and dry.

If with stones

Jewelry with stones comes in several types, depending on which cleaning is carried out:

  • Precious stones with adhesive fastening are wiped with a cotton swab dipped in alcohol or cologne.
  • Semi-precious opal, amber, turquoise and others become dull from ammonia, and pearls from vinegar will deteriorate (dissolve and collapse). They should be washed in warm soapy water with a soft cloth and dried immediately without leaving them wet.
  • Diamonds are washed in soapy water or ammonia.

For cleaning items with stones fixed without glue, and chains with complex weaving, the method of immersion for two hours in a 1:1 solution of peroxide and ammonia is suitable. This method peels off the dirt, all that remains is to rinse and dry.

To ensure that jewelry retains its shine, it is necessary to remove it before playing sports or doing household chores and not expose it to water for long periods of time. Creams, varnishes and other cosmetics lead to the appearance of an oxide film on the surface, and semi-precious stones can change color due to temperature changes. Following these simple rules for caring for jewelry and regular cleaning will allow you to enjoy its beauty for many years.

autor_2, March 26, 2016.

to the Modern Housekeeping channel in Yandex.Zen

Save and share information on social networks:

Discussions are closed for this page

Source: https://sovremennoedomovodstvo.ru/lifehack/kak-pochistit-zoloto/

How to clean gold quickly and effectively?

Chains and earrings, bracelets and rings - jewelry brings a whole sea of ​​pleasure. But the shine of all these “trinkets” can fade very quickly if you don’t make an effort. Learn how to clean gold at home and enjoy its beauty.

Universal recipes for cleaning gold items

For cleaning gold rings and chains at home, you will certainly find these folk recipes useful!

Powder, ammonia and water

Cleaning with ammonia will take several hours, but your accessories will simply sparkle!

Compound:

    • Ammonia – 1 tsp;
    • Water – 200 ml;
    • Powder – 1 tbsp. l.
  • Step 1. Pour boiled water into a deep plate.
  • Step 2: Add laundry detergent.
  • Step 3. Add ammonia.
  • Step 4. Mix well.
  • Step 5: Place the rings in water for about 2 hours.
  • Step 6: Rinse and dry with a soft cloth.

Dishwashing liquid

Another good method that will allow you to cope with even severe dirt.

Compound:

  • Water – 200 ml;
  • Detergent – ​​1 tsp.
  • Step 1. Add dishwashing gel to cold water.
  • Step 2. Place the container on the fire, lining the bottom with a soft cloth.
  • Step 3: Place your jewelry in this soapy solution.
  • Step 4. Boil for 10 minutes.
  • Step 5: Rinse and dry.

Hydrogen peroxide and liquid soap

Compound:

    • Water – 200 ml;
    • Peroxide – 40 g;
    • Liquid soap – 1 tsp;
    • Ammonia – 1 tsp.
  • Step 1. Warm up the water slightly.
  • Step 2: Add all ingredients.
  • Step 3. Pour the solution into a deep bowl.
  • Step 4: Immerse the gold for about 20 minutes.
  • Step 5: Rinse and dry them.

Salt

You can also clean gold jewelry with kitchen salt. It's very easy to do!

Compound:

  • Salt – 3 tbsp. l.;
  • Water – 200 ml.
  • Step 1: Add salt to hot water.
  • Step 2. Drop the gold into the solution and leave it overnight.
  • Step 3. In the morning, rinse and dry with a soft cloth.

By the way, salt in this recipe can be replaced with sugar. The effect will be exactly the same.

Foil, soda and water

These simple ingredients, found in every kitchen, will make gold shine.

Compound:

  • Water – 200 ml;
  • A piece of foil;
  • Baking soda – 1.5 tbsp. l.
  • Step 1. Prepare a solution of baking soda and hot water.
  • Step 2: Line the bottom of the bowl with foil.
  • Step 3: Place your decorations on top.
  • Step 4. Wait 8-12 hours.
  • Step 5: Rinse in cool water and dry.

Borax solution

If your gold chain is very dirty, try cleaning it with this effective product.

  • Step 1. Soak a piece of silk fabric in the borax solution.
  • Step 2: Lightly polish the jewelry.
  • Step 3. Rinse them and rub them until shiny.

Chalk and ammonia

Compound:

  • Chalk - 3-4 pieces;
  • Ammonia – 5 tbsp. l.
  • Step 1. Crush the chalk into powder.
  • Step 2. Add ammonia to it.
  • Step 3. Use a toothbrush or a piece of cloth and rub the gold.
  • Step 4: Rinse and dry.

Vinegar

How to clean gold without harm and without scratches?
Take table vinegar, soak a clean cloth in it, wipe the dirty areas, rinse and dry. Lipstick

A very unusual method, but quite effective!

  • Step 1: Apply some light lipstick to the gold ring.
  • Step 2. Walk it over the entire surface.
  • Step 3: Polish the ring until it shines with a piece of velvet.

Egg white and beer

  • Step 1: Beat the egg white.
  • Step 2. Add a little beer.
  • Step 3: Soak a soft, clean cloth in the cleaning solution and clean your gold jewelry.

Onion juice

  • Step 1. Squeeze the juice from the onion.
  • Step 2. Dampen a napkin in it.
  • Step 3. Wipe the jewelry, rinse in clean water and dry with a soft cloth.

Special cleaning paste

Compound:

  • Toothpaste – 1 part;
  • Chalk (crushed) – 1 part;
  • Laundry soap shavings – 1 part;
  • Vaseline – 1 part;
  • Warm water – 1 part;
  • Alcohol – 1 part.
  • Step 1. Combine all ingredients (except alcohol).
  • Step 2. Lubricate the surface of the product with paste.
  • Step 3: Using a soft cloth, move in the same direction.
  • Step 4: Wash the gold in rubbing alcohol to remove the Vaseline.

How to properly clean jewelry with stones?

Classic cleaning methods are not suitable for gold items with stones. And such products cannot be placed in water. You will need gasoline, cologne or alcohol.

  • Step 1. Dip a cotton swab in any of these liquids.
  • Step 2: Use smooth movements to clean the stones. It is better to do this with a rag, as sharp objects can damage the frame.
  • Step 3. Wipe the jewelry with a clean cloth and dry.

How to clean gold with a matte surface?

Jewelry of this type is becoming more and more popular, but you need to take care of it very carefully. Powders and hard brushes are not suitable for these purposes. We advise you to stock up on lime and ammonia.

Ammonia

  • Step 1. Immerse the product in ammonia.
  • Step 2. Leave it for a few hours.
  • Step 3: Wash and dry with a cloth.

Lime

Compound:

  • Lime – 1 tsp;
  • Soda - half a teaspoon;
  • Water – 1 tsp;
  • Salt is on the tip of the knife.
  • Step 1: Combine dry ingredients.
  • Step 2: Add warm water.
  • Step 3. Leave the mixture for 3-4 days.
  • Step 4: Place the gold in this solution for a few hours.
  • Step 5: Rinse and dry.

How to clean white gold?

White gold is composed of an alloy of three metals (nickel, gold and copper), coated with a layer of rhodium. The surface of such jewelry can be quickly wiped off, so their cleaning should be soft and gentle.

Dentifrice

Using powder, you can very easily and quickly clean white gold from blackness and impurities.

  • Step 1. Mix teeth cleaning powder (3-4 tbsp) with a little water.
  • Step 2. Dip your toothbrush into the resulting paste.
  • Step 3. Use this brush to clean all earrings and rings.
  • Step 4: Rinse them with clean water.

Ammonia, shampoo, water

Compound:

  • Shampoo – 1 tsp;
  • Ammonia – 1 part;
  • Water – 1 part.
  • Step 1. Mix shampoo, water and ammonia.
  • Step 2: Drop your decorations into this solution.
  • Step 3. Wait half an hour.
  • Step 4. Wash and dry.

Water and mild soap

Compound:

  • Soft liquid soap – 1 part;
  • Water – 1 part.
  • Step 1: Combine soap and water.
  • Step 2: Soak the gold in this solution.
  • Step 3. Wait half an hour.
  • Step 4. Wipe the items with a rag.
  • Step 5. Rinse off any remaining soap with water.

Attention! Do not use products containing chlorine or harsh chemicals to clean white gold.

Source: http://OUborke.ru/kak-pochistit-zoloto-v-domashnikh-usloviyakh

Methods and rules for cleaning gold yourself - Shine Samotsvet

Not only women love gold jewelry, but also men often wear chains and rings made of this metal. But over time, gold items begin to darken and stains appear on them.

To prevent this, they need to be properly cared for. There are several recommendations for cleaning gold. Following these rules will keep your jewelry in good condition.

Now factories make such jewelry with a low gold content. The metal itself does not lose its shine; this phenomenon is caused by additional components that are included in the jewelry.

Unfortunately, you can’t do without them, since pure gold has a huge price. In addition, such impurities increase the strength of the product.

Maintaining the appearance of a chain or ring is quite simple; all you need to know is how to clean gold yourself.

Cleaning methods

It is not necessary to take your jewelry to a specialized workshop. You can also clean it at home.

There are several effective recipes for this:

  • Toothpaste copes well with this problem. It is applied to the product and cleaned with a soft brush. Then, simply wash off with water.
  • They often use a product that is used when washing dishes. It is dissolved in water, which must be purified, and not from the tap. For 200 g of water, 1 teaspoon of chemical is enough. Place a cloth in a container with warm water and pour in detergent. The gold item is placed on a cloth. The water should completely cover the decoration. Then boil for 7 minutes. Then the gold is taken out and washed with running water. This method is suitable for jewelry that has complex patterns and is heavily soiled.
  • If the gold has simply darkened, then it is better to use a simpler cleaning method. Add 3 tablespoons of salt to a glass of boiling water. When the solution has cooled, the product is dipped into it and left overnight. In the morning, rinse and dry. The decoration will become shiny again.
  • Sometimes they clean with soda. For a glass of boiling water - 2 tablespoons of soda. Place a piece of foil on the bottom of the cup, on which the gold is placed. Pour in the cooled solution and leave for 12 hours.

If these methods do not help, you will have to take it to a workshop. But, basically, these methods are sufficient.

Preserving the shine of gold jewelry

Knowing how to clean gold is good, but it's better to learn how to keep your gold in great condition for a long time.

Here are some helpful tips you can use:

  • Always remove jewelry when doing any work.
  • You can take water procedures and play sports without gold.
  • It is better to remove jewelry when applying cosmetics.

    They moisturize the skin and eliminate wrinkles, but greatly harm the noble metal. The slightest chemical reaction will ruin an expensive product. By the way, this also applies to various drugs, such as iodine or brilliant green.

Following these simple rules will help keep your gold jewelry in excellent condition.

Source: https://kabirski-store.ru/osobennosti/metody-i-pravila-samostoyatelnoj-chistki-zolota.html

Did you like the article? Share with friends:
Metals and their processing
-- Sideb lion (lipk) -->
Where can you get lead?

Close
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]