How to clean medical gold at home

How to clean jewelry from darkening at home?

Costume jewelry is a beautiful and inexpensive alternative to jewelry that can be combined with everyday and evening outfits. Its only drawback is its tendency to tarnish and form rust spots. However, real fashionistas know that you can prolong the shine and beauty of your favorite earrings and rings at home using improvised means.

Cleaning methods

Nowadays, the following materials are used to make jewelry:

metal coated with imitation gold;
copper;
alloys imitating silver;
stones;
plastic;
glass.

Over time, oxidation occurs in metal alloys, rhinestones and glass become dull, and stones darken due to exposure to dust and household chemicals. To clean these materials from blackness or darkening, you need to use a special approach. This allows you to protect some products from moisture, others from abrasive substances. That is why, before you start cleaning your jewelry, you need to carefully study the characteristics of the materials.

Cleaning metal products

There is a huge selection of special pastes and tonics with which you can clean metal accessories. If necessary, you can use mixtures prepared at home for this purpose:

To clean the product from blackness, it is enough to immerse it for 2-3 minutes in a solution prepared from 2 tbsp. tooth powder or chalk and 0.5 cups of water. After 2-3 minutes, remove it and wipe it with a soft bristle brush. To give it shine and remove any remaining mixture, rub it with a woolen cloth.
To clean the chains, you can use toothpaste, which is applied to problem areas using the same soft-bristle brush.
Imitation silver jewelry can be cleaned using a special paste. It is a paste of baking soda, which is brought to a creamy state with the help of water. This paste is applied to problem areas and left there for a while so that the active substance can dissolve the dirt. After the time has passed, the jewelry should be treated with a toothbrush, rinsed and wiped with a soft cloth.
To clean items with imitation silver, you can use ammonia. To do this, you need to apply it to a cloth, treat the contaminated surface with it and polish the area with a dry cloth. For the same purpose, you can immerse earrings or a ring in a high concentration soap solution for 10 minutes. If stains remain on them after this, they should be wiped with the same solution, but with a toothbrush.

Some housewives recommend using vinegar to remove small areas of rust. When doing this, you need to be careful: due to the effects of acid, medical steel products may blacken even more.

Cleaning Copper Alloy Products

Copper accessories can be removed from darkening using a vinegar mixture. To do this you need to do the following:

mix vinegar with ground salt,
bring the mixture to a paste,
soak a rag in the pulp and treat the stains,
remove the remaining mixture with water and dissolved salt,
wipe the product with a soft cloth.

Cleaning copper with garlic is considered a little painstaking, but very effective. You just need to grate 2-3 cloves of garlic at home, mix the mixture with salt and rub the product with it. After 5 minutes, wash off the mixture.

Cleaning sprayed products

To care for accessories imitating gold, under no circumstances should you use abrasive products, as they will erase the coating. In this case, only gentle cleaning with water and soap is allowed. To do this you need:

place the product in water with dissolved soap,
clean it with a cloth or soft sponge,
treat hard-to-reach areas with a cotton swab.

If you add 2-3 drops of ammonia to the water, in addition to soap, then after cleaning the jewelry will again shine. For the same purpose, you can use a rag soaked in wine vinegar. After cleaning the blackness, the product must be rinsed and dried.

Cleaning glass and rhinestone products

Earrings, rings, glass and plastic necklaces can also be cleaned at home. To do this you need to do the following:

dissolve a few drops of dishwashing detergent in water;
place your treasures in the resulting soapy liquid;
leave them in the water for a certain time (the stronger the contamination, the longer the exposure should be);
Lightly shake the container with water so that dirt comes off the surface;
Rinse the product with clean water.

If you dilute the liquid with a spoon of ammonia, then after drying the products will sparkle again. Ammonia is suitable for cleaning rhodium accessories. A soap solution can be used to remove stains from artificial pearl items.

Cleaning products with natural and artificial stones

If you doubt the naturalness of the stones used in your earrings or necklace, it is better not to risk treating them with water. To prevent them from darkening, you need to lightly polish the surface with a woolen cloth.

Jewelry containing mother-of-pearl, opals or aquamarine should be cleaned with clean water and a soft cloth. To speed up the drying process, you can use a hair dryer. You just need to handle the glued areas with caution, as they may come off due to exposure to high temperatures.

Rules of care

To prolong the beauty of your favorite jewelry, just follow these rules:

remove them when showering or applying skincare products;
avoid their contact with perfumes and acetone-containing liquids;
do not expose them to high humidity and sunlight;
do not forget to clean them before storing them in a box or safe for long-term storage;
Dry them thoroughly after cleaning and washing.

A little effort, personal time and financial expenses will help you restore and preserve the beauty of your favorite jewelry!

Source: https://www.modnayakoshka.com/blog/16/

How to clean gold at home

When worn, gold jewelry often becomes dull and becomes coated. Various means help restore them to their original appearance. You can buy professional cleaners in jewelry stores, but household methods also come to the rescue.

To clean gold at home, you need to follow these rules:

The container for the products is taken so that it does not oxidize during cleaning. It can be plastic or glass. The dishes are chosen to be deep so that all the decorations fit into it.
When soaking, the gold should be completely covered with the solution.
The mechanical cleaning method is used in exceptional cases when other methods have proven ineffective.
If the gold is below 585, it will not be cleaned with a soap solution.

There are many traditional ways to clean jewelry.

Hydrogen peroxide

To make gold shine, use a special solution, which is prepared from the following components:

hydrogen peroxide - 50 ml;
heated water - 200 ml;
ammonia - 1 tsp;
softening liquid soap - 1 tsp.

All ingredients are mixed. Get a product into which the gold jewelry is dipped. Keep it for a quarter of an hour, take it out and polish it with a soft cloth.

Another method will require the following ingredients:

hydrogen peroxide - 3 tbsp. l.;
baking soda - 2 tbsp. l.;
water - 250 ml.

Everything is combined, and the jewelry is placed in this liquid overnight. In the morning they are removed, wiped, dried and rubbed with a napkin until shiny.

Ammonia

Ammonia is often used to clean gold. This is the best remedy to help rid products from oxidation. Cleaning methods:

Pour 2 tsp into a pan of heated water. shampoo and 0.5 tsp. ammonia. Gold is dipped into the solution. After 15 minutes, it is taken out and placed on a napkin to dry.
In this case, ammonia with a higher concentration is used. Fill a container with this product and place gold jewelry there. How long they will lie there depends on the degree of contamination of the metal. In difficult cases, the products are kept overnight. In the morning, take it out and dry it.
The next method will require washing powder and ammonia. Pour boiling water into a glass container and add 1 tsp. ammonia and add 1 tbsp. l. powder. Jewelry is placed in the resulting solution for 1 hour.

Ammonia can remove any contaminant, but does not always cope with black oxidation. In this case, only mechanical cleaning can help.

Ammonia

There are different ways to clean gold with ammonia. The most effective include the following:

Using ammonia in its pure form. Use it to generously moisten a cotton swab and wipe the gold with it. Then the jewelry should be washed under running water.
To get rid of light contamination, take 1 tbsp. l. alcohol and 200 ml of water, mix. Valuable items are immersed in the resulting product for 40 minutes.
Use 2 tbsp. l. washing powder, 200 ml water and 1 tsp. ammonia. All ingredients are mixed. In this solution you can clean a gold ring with stones. This product can get rid of old stains.

Cleaning white gold jewelry with ammonia is prohibited.

Soda

There are many ways to brighten jewelry using baking soda.

Boiling method. To do this, take 2 tbsp. l. soda and 200 ml of water. The bottom of a metal pan is covered with a soft cloth and gold objects are placed on it. Pour soda into a glass of water, mix and pour into a saucepan. Place it on low heat and boil for 30 minutes. Then the products are removed, washed and dried.

Objects made of such metal can be boiled in a solution, for the preparation of which you take:

sodium salt - 2 tbsp. l.;
water - 200 ml;
detergent - 1 tsp.

Place a soft cloth in an even layer in a metal dish and place the product on it. Prepare a solution by mixing these components. Fill a container with this liquid, place it on low heat and boil for 25 minutes.

Salt

Ordinary salt helps to brighten gold. To obtain a cleaning solution, dissolve 3 tbsp in 100 ml of water. l. salt. Valuable items are placed in it overnight.

Dishwashing liquid

Gold items can be brightened well with dishwashing detergent. To prepare the solution, add 1 tsp to a glass of water. substances. Cover the bottom of the pan with a cloth, pour in the resulting product and place the decorations there. Boil for 20 minutes. Then the products are rinsed and dried.

Sugar

Thanks to sugar, gold jewelry regains its former shine. Place 2-3 tsp in a glass of water. sugar and stir. Gold objects are placed in the liquid and kept overnight. In the morning they are taken out, washed and wiped dry with a napkin.

Cleaning gold with foil

You can soak the products in a soda solution with foil. To prepare it you will need:

soda - 3 tbsp. l.;
salt - 2 tbsp. l.;
water - 200 ml;
foil - 30x30 cm.

The bottom of the glassware is lined with foil and gold objects are placed on it. Place salt and soda in a glass of boiling water. The resulting product is poured into gold and left for 10 hours. Then the products are taken out, washed and dried.

Professional gold cleaning products

Gold cleaning can be done using professional means. This can be paste, aerosols, liquid solutions. This procedure does not harm the jewelry. The most popular means include the following:

"Aladdin". This is a specially developed product for cleaning gold items. It can be in the form of paste, polished napkins, solutions. Eliminates plaque, dirt, oxidation. If you strictly follow the instructions, any damage to jewelry is excluded. Gold brightens within 2 minutes.
Town Talk. This is a liquid for cleaning gold jewelry. To rid jewelry of dirt, place it in this solution for 1-2 minutes, and treat hard-to-reach places with the brush included in the kit.
"Asidol-M". This is a liquid containing abrasives, surfactants and additives. Helps get rid of dirt and oxidized film. Apply the product to a dry surface, hold for 1 minute, after which the decoration is wiped with a soft cloth.

There is a special device that helps clean jewelry with ultrasound. The bath is made of plastic and is closed with a transparent plastic lid. Through it, the purification process is observed.

The device works as follows: pour water into the bath container, put jewelry there and turn on the device. Small bubbles appear and begin to burst, creating a sound pressure effect.

This is how ultrasound cleans gold from impurities. The process lasts 3 minutes.

Cleaning gold with diamonds and other stones

If the jewelry contains precious stones, the item must be cleaned with extreme care. Many gems and minerals are damaged not only by interaction with alkalis and acids, but even with ordinary water. Therefore, you need to adhere to the following recommendations:

It is prohibited to wash gold with stones using abrasives or to clean with hard brushes;
topaz and emerald should not be rinsed with hot water;
opal, amethyst, garnet are treated with a soft brush and soap solution;
moonstone, tourmaline, turquoise are not cleaned with a special device;
ammonia and soap solution are used to clean diamonds;
chrysolite must not be cleaned with acid, and even lemon peel cannot be used;
Pearls and turquoise can be damaged by high temperature, ultrasonic exposure and chemical agents.

We clean gold and cubic zirconia with washing powder or ammonia. Toothpaste that does not contain abrasive particles is allowed. Any of these products are applied to the item and gently brushed with a toothbrush. Wash under water and polish stone and metal with flannel.

Gold and diamonds are washed in a solution of soap shavings, cleaned with a brush and treated with ammonia. You can soak this decoration for half an hour in an ammonia solution (1 teaspoon of the substance per glass of water). Rinse with water and polish with flannel.

How to clean white gold

If white gold is heavily contaminated, use the following methods:

The decoration is soaked in a solution of soap shavings for 20-25 minutes. Then the gold objects are removed and cleaned with foam rubber. Wash and wipe with a flannel or woolen rag.
Toothpaste is used, which is applied to the surface of the product and treated with a brush to clean the teeth. The gold is washed and dried.
If the jewelry is with a diamond, use ammonia. A rag is soaked in it, the jewelry is wiped and washed with water. Use a soft cloth for polishing.
White gold can be cleaned with cosmetic lipstick. Thanks to this product, the decoration acquires shine. Polish the product with a flannel or woolen cloth.
You can soak gold in a cleaning solution, for the preparation of which you take white chalk and ammonia. This gold cleaning product is used for the most stubborn stains. 6-8 drops of ammonia and a small amount of chalk are added to 100 ml of water, and gold objects are dipped into this liquid for half an hour. Then the products are cleaned and wiped.

The latter method is prohibited if white gold is decorated with turquoise, moonstone, or opal.

How not to clean gold

Gold cannot be cleaned:

bleach, which causes the metal to tarnish;
vinegar and potassium permanganate - they oxidize the surface;
iodine - it colors gold.

If the product contains stone, do not use acids or vinegar. It is contraindicated to clean such jewelry with a rough brush or wet it with water. White gold should not be cleaned with a brush or toothpaste.

Source: https://uborka-v-dome.ru/pravila-chistki/kak-pochistit-zoloto-v-domashnih-usloviyah.html

Cleaning gold at home quickly and efficiently

Exquisite gold jewelry is very popular. The question of how to clean gold items yourself is extremely relevant. This noble metal is the pride of its owner. In order to maintain an attractive appearance, cleaning is necessary. In the process of constant use, products lose their shine and become covered with plaque.

Be sure to consider the nature of the contamination. Are there stones in the product or not? What kind of gold is it, yellow or white? Based on this, one or another cleaning method is selected.

THIS IS INTERESTING: How to sharpen skates using Emery

Jewelry lasts for many years and is often passed down from generation to generation. This metal needs careful care. If this is not done, then over time it will fade and will no longer delight with its brilliance. In order for “riches” to bring joy and pride to the owner, and to arouse the admiration of others, they must be periodically properly cleaned.

10 effective home remedies

Method number 1. "Russian". Take potatoes and onions in equal parts. Pass through a meat grinder and squeeze out the juice. Gold is placed in mashed potatoes and onions for one hour. Take out and wash thoroughly under running water.

Method number 2. Bulb. Cut the onion head. The precious metal is rubbed with the cut and left for a while to remove dirt and stains. The onion is harmful for products with stones.

Rubbing the product with onions

Method No. 3. Weak sugar syrup. Dissolve one tablespoon of sugar in 250 ml of water. This composition does a good job of returning the gloss to products.

Method number 4. Coca Cola. Pour one bottle of cola into a cup so that all the gold is submerged in the soda. After 9-10 hours, wash and dry. This method will help restore the original appearance of jewelry.

Method No. 5. Salt. Three tablespoons + 1/2 cup water. Stir thoroughly and drop gold into the solution. Leave the products for 3–5 hours. This express method removes dark plaque.

Method number 6. Ammonia + peroxide + soap. Dissolve soap, 1 teaspoon of ammonia, 3% hydrogen peroxide thirty milligrams and dip the jewelry. Products can be left for no more than 10 minutes, otherwise they will lose their shine and may begin to crack over time.

Soap solution with ammonia and peroxide

Method No. 7. Ammonia. Stir detergent + 1 tablespoon of ammonia 25% in boiling water. Stir and soak the gold for 1-2 hours. This is appropriate for stones (cubic zirconia, zirconium, diamonds). Later, rinse and rub with a flannel cloth until sparkling.

Method No. 8. Soda + foil. Divide 1 s. l. soda in 200 ml of water. They take a saucepan. The bottom is covered with foil. Place and fill with soda solution. They forget for a day. Wash in running water. Rub with a soft cloth. If you don’t have time to wait long, then put the pan on low heat for 10–15 minutes, then cool and rinse under running water. Cleaning gold with foil and soda

Method number 9. Egg white + beer. Beat one egg white with a glass of beer into a stiff foam. This method removes matte deposits on jewelry.

Method No. 10. Water + Vaseline + chalk + soap. Take some water. Rub laundry soap on a grater. They crumble chalk. Mix everything until smooth. Apply to products with a soft brush. After 15–20 minutes, wash in warm water. Wipe with a soft cloth.

White gold cleaning

White gold jewelry is cleaned differently than yellow gold jewelry. It is susceptible to scratches. Please keep this in mind and perform careful cleaning.

Things to remember about white gold:

The products are plated with rhodium, which wears off quickly. Such products can only be cleaned with soft lint cloths. Make a solution of ammonia with water. Keep in this solution and wipe. Do not leave moisture on the products as this may adversely affect them.
It is forbidden to use pastes and powdered products. Use an easy, popular method that removes dirt. Mix two tablespoons of beer of any kind with one egg yolk. Apply this mixture to a rag and rub well.

Cleaning gold with a napkin

Cleaning gold with stones

There are two types of stones: “hard” and “soft”. Based on this, cleaning will vary. "Hard" stones are measured on the Mohs scale. The coefficient of such stones is not lower than five. Cubic zirconias shine better after cleaning in a weak solution of ammonia.

“Soft” stones (coefficient below five) “do not like” vinegar, lye and ammonia. Prolonged contact with water may cause minerals to become dull or damaged.

Products with pearls cannot be cleaned with vinegar. This mineral can dissolve in acid.

Turquoise is very afraid of ammonia. And from water it loses its brightness. Should be wiped with an alcohol solution.

Initially, we remove dirt from the stones using cotton swabs soaked in vodka or alcohol. Clean the frame in a mild soapy solution with a soft brush.

Cleaning the product with a brush

Often the stones are glued to jewelry. Cleaning with water should be avoided. The glue used to glue the stones is mostly water-soluble, and over time the stone may fall out. It is better to clean with an alcohol solution, which will do an excellent job of removing greasy stains.

A solution of water and ammonia in a ratio of 1/6 is suitable:

Dip the products in gasoline for half an hour. Then rub until shiny.
Apply warm soapy solution. Rinse the jewelry in it for a few minutes. Wipe dry with a napkin.
A weak ammonia solution is not suitable for cleaning pearls, and then rub it with flannel material.
Rubies can be washed in a light solution of water and baby soap, which is whipped into a thick foam. Immerse the products for an hour. Dry.

How to clean matte gold

Such products require a special approach.
Prepare a paste of lime + water, one spoon at a time. Add a pinch of salt. 1/2 teaspoon of soda. Infuse the mixture for 3 days. Place gold jewelry in the infused paste and leave for 3-4 hours. Rinse with clean water and wipe with soft flannel.

Matte gold

You can clean matte gold without precious stones with ammonia. Place the gold in a 25% ammonia solution. Leave for 2 hours. Rinse with clean cold water and wipe with fleece.

Don't make mistakes

Precious stones (amber, pearls, coral) are not allowed to be polished with ammonia, otherwise the stones will be damaged. Do not throw gold and stones into water for a long time. Do not rub the products with a hard brush, otherwise scratches may occur.

These tips will help you keep your favorite gold items in impeccable appearance and condition for as long as possible.

Gold is a very beautiful and precious material that constantly attracts attention, which is why it is very important to maintain its beautiful appearance and not forget to properly, and most importantly, systematically care for it.

Source: https://welady.ru/chistka-zolota-doma

How and with what to clean gold at home quickly, cleaning gold with ammonia, hydrogen peroxide, ultrasound

Over time, gold jewelry loses its former attractiveness and begins to fade and darken. In order to put a gold item in order, it is not necessary to go to a workshop; you can do it yourself. How to clean gold at home will be discussed below.

Gold jewelry is a source of pride for its owner.

How to clean gold

A beautiful piece of jewelry always attracts attention and is also a great addition to any outfit. However, it is important to provide proper care to gold jewelry. Let's figure out how to clean gold at home and what methods exist.

In order to maintain their attractive appearance, it is necessary to clean them, since during use the products become coated and lose their shine.

If the jewelry is smooth and does not have carved elements, engravings, or inserts, then it is quite possible to care for it at home. Maintenance will consist of removing grease and dirt using a soapy degreaser and hot water.

This applies to classic wedding rings or simple earrings. There are 3 ways to clean dirt and stains:

soaking (from 30 minutes to 12 hours);
polishing;
cleaning (mechanical).

For many people, the question is how to clean gold at home in order to get a good and durable result.

In jewelry workshops, the following methods are used to clean jewelry:

ultrasonic;
chemical (special compounds are used).

Attention! Regardless of whether the gold jewelry is used or just lies in the box, over time it will still lose its former shine.

Knowing the composition of gold jewelry will help you achieve good results.

How to clean gold at home

You should definitely know how to clean gold at home. At home, every housewife will definitely have cleaning products for jewelry that will return it to its attractive appearance in a short time.

Important! Gold is not used in its pure form; other substances are necessarily added to the alloy to improve physical and chemical properties.

Using foil

If you want to not only clean gold at home, but also give it a perfect shine, then the foil method is the most suitable option. It is necessary to cover the bottom of the glass with foil, put gold and fill it with soda dissolved in water (1 tablespoon per half glass). It is best to leave it overnight.

Place the jewelry there overnight, and in the morning, rinse it under the tap and dry it with a towel.

Vinegar

Vinegar cleaning is more suitable for yellow and red gold. You can use white vinegar or apple cider vinegar.

It is enough to soak the precious metal jewelry in the substance for 10-15 minutes. Then remove and rinse in running water. If necessary, you can gently clean the product with a toothbrush. It is better to use ceramic or glass dishes. This is all about white vinegar.

Soak in table vinegar and carefully treat the jewelry.

Consider a cleaning method using apple cider vinegar. You will need:

1 glass of vinegar;
¼ cup salt and the same amount of flour;
Toothbrush.

Actions:

pour half a glass of vinegar into a bowl;
Place the product in the container and leave for 15-20 minutes, the vinegar should completely cover it;
Next, mix the remaining ingredients: salt, flour and half a glass of vinegar;
the consistency should be thick, you need to dip a brush into it, and then clean the jewelry with it (after removing it from the solution);
rinse with cold water;
Wipe the product with a dry cloth.

Afterwards, rinse with water and wipe dry with a soft cloth.

Attention! You should treat white gold with special care, excluding the use of a toothbrush, paste and powder.

How to clean gold with ultrasound

We have already looked at possible ways to remove dirt from gold at home, what else can you use to clean gold?

A new method of caring for jewelry is ultrasonic cleaning. Thanks to this method, even stubborn stains and old dirt can be removed. Using special equipment, cavitation foam is created in a container with a special product, which, due to its fine dispersion, penetrates even microscopic parts of the jewelry, removing blockages.

This helps give the gold its original appearance and also eliminates the risk of damage since no harsh chemicals are used.

Is it possible to clean gold with citric acid or toothpaste?

It may seem strange to some, but regular toothpaste will help get rid of stains on jewelry. The powder or paste should be applied to the product and then brushed with a soft-bristled toothbrush. Then it should be rinsed in cold water and wiped dry with a cloth.

A little paste, an old toothbrush and a little patience will remove old plaque from gold.

Despite the positive results, many are not sure whether this method is safe. In fact, tooth powder refers to abrasive substances that contain grains that can scratch the surface. Therefore, you should not use toothpaste on smooth items or jewelry with stones.

Use softer and more delicate mixtures.

Cleaning white gold with toothpaste is strictly prohibited. To do this, it is better to take a soft cloth. The alloy contains three metals (gold, copper and nickel) that are easily abraded. Toothpaste can cause quite a lot of damage to the surface.

Be especially careful with such jewelry.

Citric acid is also used to remove plaque from precious metal jewelry. However, you should be careful with this substance; it can only be used if the product does not have scratches. If there are damages or stones, the substance cannot be used.

White gold differs from regular gold in that it has silver, palladium or nickel added to it to create a lighter shade, and is often plated with rhodium on top.

Medical gold is an alloy of titanium, silver, brass, copper and zinc. Gold itself may not be included in this composition at all. Products made from such gold are highly durable and are not subject to mechanical stress. Thanks to a special method of polishing and spraying, the jewelry retains its original shine and does not darken or change color.

Wipe gold items dry if they have been exposed to moisture.

If the need arises, medical gold can be cleaned of contaminants in the following way:

The glass must be filled halfway with water, add 2 drops of liquid soap or shampoo to it. Use a soft brush to clean.
You can remove dust using a cotton swab previously soaked in beer. There is no need to rinse the product under water.
The decoration can be wiped with table vinegar and then rinsed under waste water.

Remove rings and bracelets before cleaning, going to the bathhouse or sauna, and when removing nail polish.

Tips for Cleaning Gold

By following simple rules, you can preserve the shine of gold jewelry for a long time:

It is recommended to store jewelry in a box. To prevent them from scratching each other, each should be in a soft cloth bag. Storage in separate cells is allowed.
Gold does not like direct sunlight, so a dark place is ideal for storage.
When doing household chores, it is better to remove the products.
Preventative cleaning should be carried out at least once a month.

When cleaning gold, accuracy, slowness and delicacy are important.

Such simple and useful folk advice will allow you to return gold to its former beauty. Also, do not forget about proper care to avoid plaque and scratches. This is the only way your favorite gold jewelry will delight the eye for many years.

Using these methods you can clean gold quickly and effectively.

VIDEO: How to clean gold at home

Source: https://severdv.ru/sovety/kak-pochistit-zolotoe-izdelie/

How to clean gold at home quickly and effectively

Gold has long ceased to be a symbol of luxury and wealth. Absolutely everyone can afford jewelry made from it, but not many know how to care for it, much less how to clean gold at home quickly and effectively.

Speaking about gold products, it is worth understanding that they are not made from pure material, but with the addition of alloys of other metals. It is they that oxidize, darken and become stained, which is why the overall appearance of the same ring becomes faded and dirty.

By combining various alloys, jewelers obtain a material that differs in color, composition and properties. This means that during wear it can manifest itself in different ways and does not always require the same cleaning methods. Cleaning methods for white gold differ from yellow or red gold, as do matte and shiny surfaces. The situation becomes even more complicated if the product contains some inserts, such as stones or patterns.

We will talk about each of these cases in more detail further, and you will find out the best way to clean gold at home so that it shines like new again.

What to choose for cleaning gold

There are several options for how to rid your jewelry of dirt:

Hand over gold items to specialists. They will select the most suitable type of cleaning, since they have enough effective products in their arsenal;
Buy a special-purpose solution in the jewelry department;
Resort to folk remedies.

The most correct is definitely the first method. The advantage of the second is that it is suitable for home use, and the third is, of course, the most budget option, because most often all the products are always in stock, or they can be purchased very quickly at a pharmacy kiosk or supermarket.

THIS IS INTERESTING: How to clean spoons from Mnc

What these methods have in common is that you get almost the same result. And if you want to quickly and cheaply put your gold in order, then the last option is ideal for you.

There should be no questions with the first two, but we will explain the third more specifically. So, how can you clean gold at home?

Matte gold

We decided to talk about this most delicate type of gold at the very beginning, because due to its matte coating, it cannot be rubbed with brushes or even fabrics, not to mention any powders. The most effective way to clean such jewelry is by soaking it. What can be considered a basis:

Ammonia solution (not higher than 25%). You can leave rings, chains, etc. in it for no more than 2 hours. Then they are rinsed in clean water and carefully wiped off excess moisture.
A mixture of lime (1 tsp), salt and soda (0.5 tsp each), filled with a glass of water, is left in a dark, cool place for three days. After 72 hours you can pour it over the gold, and after a couple of hours you can rinse it and dry it.

White gold

Shining white gold darkens and even turns yellow over the years. To prevent a negative process, you need to know one proven recipe:

Boil half a glass of water (100 ml);
Pour 1 tbsp into boiling water. detergent or liquid soap;
Add 100 ml of ammonia to the soapy water and mix the solution well;
Pour it into a ceramic or glass bowl and place your gold jewelry there, be it a pendant, ring or earrings;
After an hour and a half, the gold should be washed under running water and wiped dry.

Yellow and red gold

These types of metal are very common and less finicky than the previous two. They can also be cleaned with ammonia.

If the product is not very dirty, then drop a few drops of ammonia onto a cotton pad and rub it over the golden surface, then wash it with soap. Clearly visible stains need to be dealt with using two methods at once - chemical and mechanical.

Therefore, combine a little crushed chalk with ammonia, and rub your decoration up and down with the resulting slurry. It is recommended to wash off any remaining cleaning product with soapy water.

An alternative to store-bought gold cleaner is a homemade paste. By the way, if there is any leftover, the leftovers can be saved and used next time. To prepare it you will need:

Powdered chalk;
Soap shavings;
Petrolatum;
Water.

Dissolve 1 tablespoon of soap shavings in a small amount of hot water. When the liquid has cooled, add the remaining ingredients one tablespoon at a time and stir. The paste should have a thick consistency. Apply it to the gold jewelry and rub it with a soft cloth. Wash off the greasy mixture with soap and clean water.

You can clean gold with table vinegar. Pour some vinegar into a ceramic bowl and immerse the product in acid for half an hour. Rinse it in cold water and you will see how it not only becomes cleaner, but also shines with greater vigor.

Jewelry with stones

Gold looks very chic, both on its own and when combined with stones. If they are glued, then know that they do not tolerate water, soaking or other contact with liquids. The only thing you can do is dip a cotton swab in ammonia or cologne, and gently wipe the contaminated surface with it, then wipe thoroughly with a cloth.

Gold with pearl stones is a very delicate topic. To make the pearlescent shine appear again, you need to mix liquid soap with a few drops of water and beat until foam appears. Using a soft eyeshadow brush, scoop up a little foam and spread it over the pebble, then use it to rinse with water and let it dry on its own.

Diamonds will sparkle if you rinse the jewelry in water with shampoo or gel. We do not recommend using hard soap, as it will leave an opaque film on the stone.

Medical gold

This phrase has recently become very popular, and not only among medical professionals. In fact, this metal has nothing in common with gold except its yellow color. Medical gold is, in fact, an alloy of copper, brass, silver, zinc, titanium nitride and others. Thus, it can even be classified as jewelry that does not require any special cleaning measures.

We personally recommend treating such products with hydrogen peroxide, soapy water, vinegar and alcohol of wine. As you noticed, these are all liquid products, since this material does not tolerate abrasives.

General recommendations

Regardless of whether it is white gold or medical gold, in its purified form it looks very presentable and beautiful. Now you know absolutely everything about cleaning a gold item, but if something is very dear to you, then it is better to try as much as possible to prevent its damage.

Try to follow the following rules:

Remove gold jewelry when doing housework, or wear rubber gloves when washing dishes and doing general cleaning;
Do not allow them to come into contact with chemical-based detergents and cleaners;
When using nail polish remover, it is also better to remove rings and bracelets from your hands;
Playing sports can scratch or bend the gold, so leave it at home;
Do not enter a tanning salon or x-ray room wearing jewelry.

How to clean gold at home video:

Source: https://scum.su/stati-po-hozyajstvu/kak-pochistit-zoloto-v-domashnih-usloviyah-bystro-i-effektivno/

Hydrogen peroxide

You can quickly remove dirt from earrings or a gold chain using ammonia and peroxide. The indicated ingredients, five and fifty grams respectively, will need to be thoroughly dissolved in a glass of soap solution.

It is necessary to immerse the soiled jewelry in the prepared liquid for thirty minutes, after removing it, wash it with water and dry it with a soft cloth.

The advantage of this method is that peroxide is able to penetrate even the most inaccessible places - into patterns and weaving.

With hydrogen peroxide in its pure form, it is quite possible to easily clean stubborn stuck dirt and small hair residues.

Useful tips for cleaning gold at home

How to clean gold at home, with peroxide, iodine, alcohol? This is a very pressing question that is asked by representatives of the fair sex who have jewelry made of precious metal. The thing is that it is a fairly soft metal, and to make it stronger, alloys (metals that make it stronger) are added to it, and they tend to oxidize under the influence of external factors.

Such processes lead to jewelry made from it becoming dull and darkened. But still, quite often jewelry has to be cleaned of dirt that appears as a result of contact with environmental products and substances. It could be:

Microparticles in the form of dust and dirt that clog hard-to-reach places on jewelry.
Exposure to oxygen.
Chemicals that are found in household chemicals.
Chlorinated water used in swimming pools.

Short description

Gold is a soft metal that has been known to mankind for a long time. It was used to make household items, jewelry, and weapons. Due to its chemical properties, this alloy has become very highly valued. Coins were minted from it, and the presence of this metal provided a guarantee of stability.

Today, there are several types of gold that differ in color. These are such as:

To obtain a yellow tint, copper and silver are added to gold.
In order for gold to have a red color, impurities in the form of copper are added to it; the more copper there is, the more saturated the color becomes.
Green gold is quite an interesting shade and is obtained due to impurities of silver and rubidium.
The white precious metal is considered one of the most expensive because platinum is added to the alloy, and nickel, manganese or palladium can also be used.
And one of the unusual alloys is black gold. Its surface is coated with rhodium or ruthenium, or it is oxidized with cobalt and chromium.

It is these additives that help change the appearance of jewelry, since contact with the environment causes an oxidative reaction. As a result, the jewelry loses its shine and the color may change slightly, so it is very important to know how to clean gold at home.

https://www.youtube.com/watch?v=OjKogbTsmxs

Taking good care of your jewelry will allow you to maintain its brilliant shine for as long as possible and avoid frequent cleaning.

To do this you need:

Remove jewelry when performing household work that involves the use of chemicals.
It is also recommended to leave jewelry at home if you plan to go to the bathhouse or sauna.
Before playing sports, you should also remove your favorite jewelry.
Doing garden work contributes to contamination of products, especially in hard-to-reach places.
Cosmetics also negatively affect the appearance of rings, chains, and bracelets, so it is recommended to remove them before applying cosmetics.

How to properly clean?

Cleaning gold at home is not very difficult, since there are a large number of options available, but it is worth considering the fact that it is better to select an individual method for each type of product. The thing is that the presence of impurities in the alloy composition can be subject to oxidation, which can lead to a worse result. How to clean gold so that it shines again and how to do it correctly?

Here are some main aspects:

You need to clean gold with stones very carefully. The whole point is that some may not be harmed by water and the presence of a cleaning agent, while others may be quite the opposite. For example, pearls, turquoise and corals should never be cleaned with a solution that contains ammonia. As for rubies, lapis lazuli and opals, stains can be removed using a solution of plain water and baby soap.
Cleaning white gold at home requires great care. This precaution is due to the fact that if you do not know the real composition of this metal, the jewelry can be damaged. Nickel is more unstable in relation to platinum, so such a product can be negatively affected by aggressive cleaning agents.

It is recommended to clean gold with diamonds and cubic zirconia using ammonia. To do this, take a glass of water, add a small amount of ammonia and soak the jewelry in it for half an hour. After that, use a cotton swab to wipe hard-to-reach places and rinse well with water. It definitely needs to be dried.

In addition, a ring with a diamond can be cleaned with a toothbrush, but it must have soft bristles. It needs to be moistened in soapy water and lightly rubbed over the decoration.

But as for the question of how to clean gold with ammonia, where there is a soft stone (amber, pearls, opal, turquoise), then using it, vinegar or other products containing alkalis is strictly prohibited. It is best to use medical alcohol for this, diluted 1:1 with water or a regular soap solution, but you still cannot leave them in such an environment for a long time.

Most people prefer to clean gold with ammonia; it works very well for removing stains on white gold items. To do this, just apply a few drops of this product on a soft cloth and polish with gentle movements. But this method is most suitable for jewelry that has a smooth surface, for example, on a ring, where there are no stones or patterns.
It is recommended to clean with ammonia and peroxide when there are dark spots on the old gold or traces of oxide are visible. How to clean gold with ammonia at home? In this case, you need to take a glass of water, 1 tsp. ammonia, 30 ml 30% sodium peroxide and 1 tsp. liquid soap. All these components need to be mixed; it is best to use non-metallic dishes and place jewelry in it for no more than 15-20 minutes. Afterwards they need to be rinsed well and dried using flannel or suede.
You need to clean gold with ammonia at home very carefully, using a light solution in which you need to place the jewelry and hold it in it for no more than 5 minutes. Approximately 5 drops of this product should be diluted in a glass of water.
You can also use another cleansing method. It consists of taking a small piece of foil and placing it at the bottom of the glass. Then you should put the jewelry in it and fill it with hot soda solution. It is done with the calculation of 1 tbsp. l. soda for 1 tbsp. water. It is recommended to keep the jewelry in a container with foil for several hours, after which they will need to be thoroughly rinsed and dried.
You can clean gold jewelry with toothpaste, but to do this, it must not contain abrasive particles that can damage the surface of the alloy. You can easily clean your gold ring and chains using this method. To do this, you will need a soft-bristled toothbrush and toothpaste. Then they need to be thoroughly rinsed with water and then wiped with lemon juice. It is worth noting that it is possible to remove stains from precious metal with toothpaste without abrasive particles quite often.
How to clean gold from iodine if droplets of this product get on it? You can use a special solution - sodium hyposulfite, which can be purchased at photo salons or pharmacies. This is the most effective way to remove iodine stains on precious metal.
You can clean gold at home, for example, with vinegar or citric acid. In this way, you can remove not only dirt, but also restore the shine and glossy appearance of the product. To do this, you need to fill a non-metallic container with vinegar and put the jewelry in it for about half an hour. Afterwards, you need to take them out and lightly brush them with a toothbrush, then rinse and dry. You can clean your gold chain very easily this way.
You can also clean gold with soda. At the bottom of the container you need to put a piece of fabric on it, put rings, earrings, chains, bracelets on it and fill it with a solution that consists of 1 cup of boiling water, 1 spoon of soda and half a spoon of detergent. The container is placed on low heat and the whole thing should be cooked for half an hour. Next, remove from heat and let cool. After decoration, rinse with water and dry with a soft cloth.

But products made from a precious alloy very easily absorb any energy, especially for jewelry given as a gift rather than purchased in jewelry stores. Therefore, it is advisable to cleanse at the energy level. But how to cleanse gold of negative energy at home? For this it is recommended to use:

Pour regular table salt into a small container and place the decorations there for several days. After which the salt must be buried in the ground or washed down the drain.
If possible, it is advisable to carry out cleansing in a church using holy water and church candles.
At home, you can light a candle and use it to draw circles over your favorite decoration.
You can simply rinse with running water for 10-15 minutes or put in holy water for half an hour.

how to clean gold at home?

How to clean gold at home: 10 simple ways

Who likes to part with their favorite gold jewelry and accessories? It is especially painful when they simply get dirty, darken, turn pale and lose their former beauty. Of course, this can be avoided if you regularly care for the metal, because even unpretentious gold needs care. But what to do when trouble has already happened? Let's talk!

1. Dishwashing liquid

The best way to combat grease, oil traces and plaque of any origin is a product created specifically for this task. Take dishwashing gel, dilute it in water and leave the decorations in it. You can even boil gold without coatings and stones in a solution for a few minutes - a good way to clean out all the small links and other hard-to-reach places.

THIS IS INTERESTING: How to make a rust removal solution

2. Salt

Saline solution is the simplest, most affordable and fairly gentle means for cleaning gold jewelry. Pour a couple of tablespoons of fine salt into a glass and leave the gold in the concentrated solution overnight, and in the morning just rinse with water. The method is not suitable for soft stones that do not tolerate long soaking.

3. Peroxide

Add 2 tablespoons of peroxide to a glass with a spoonful of liquid soap or your shampoo, and then fill it with warm water. Mix the solution and leave the gold in it for 15 minutes, then polish with a cloth.

4. Tooth powder or paste

The beauty of the method is in its simplicity: you only need them and an old toothbrush - nothing more. Keep in mind that powder cleans better, but it is rougher, and with paste you will have to tinker longer - but it is more delicate. Another method is to apply bleaching paste to the gold and leave it until it dries - this will bring back the lost shine.

5. Ammonia

It is used in its pure form, diluted with water or mixed with other components to enhance the effect. For example, with washing powder in the proportion - one spoon of each per cup of boiling water. The jewelry is placed in the solution for 1-2 hours, after which most of the dirt comes off on its own.

6. Chalk

Chalk is good for cleaning gold, but it should be jewelry without stones or coatings that are easy to scratch. Mix chalk powder with grated laundry soap or ammonia to a thick, dense paste. To apply the mixture well to the surface, use an old toothbrush. Don't forget to wash your jewelry to avoid stains later.

7. Soda and foil

Dissolve a couple of tablespoons of baking soda in hot water and place a sheet of regular kitchen foil on the bottom of the container. Place gold jewelry on the bottom and leave to soak overnight. After this, your favorite bracelets and chains need to dry on their own - lay them out on a towel or paper napkin.

8. How to clean white gold?

The thing about white gold is that it is actually an alloy of several different components. It may contain nickel, copper, palladium, rhodium plating and other additives, depending on the decoration. The main rule here is not to erase the top light and shiny layer, so no abrasives.

You can refresh such decorations in a sugar solution (2 large spoons per glass of water), in which they are soaked overnight. The same soap solution, where you need to place the jewelry for half an hour, will help with minor blackness.

When the white gold is pretty dirty, leave it for half an hour in a solution of ammonia and shampoo.

Cleaned chains and rings should be thoroughly rinsed with running water and gently wiped with a soft microfiber or paper towel. Keep in mind that restoring the lost shine of white gold is a task close to impossible. Therefore, it is better to entrust any serious manipulations and complex stains to master jewelers.

Source: https://lafoy.ru/kak-pochistit-zoloto-v-domashnih-usloviyah-10-sposobov-463

Cleaning gold jewelry correctly

Over time and with daily wear, all gold and silver jewelry becomes covered with an ugly, dirty coating. A gold chain or ring loses its shine, becomes dull and inconspicuous.

But if you regularly clean your gold at home, and do it correctly, your jewelry will shine like new. What is the best way to clean gold at home?

Of course, you can take a contaminated item to a jewelry workshop for cleaning. But this service is not cheap. You can clean gold yourself, taking into account important nuances and our recommendations.

Before you start cleaning gold

Most gold items, especially chains, rings and earrings, have areas that are difficult to clean. These can be all kinds of meshes, bulges, patterns, nests for inserting stones, ornaments. With a standard cleaning approach, these areas are quite difficult to treat. In such cases, you can use a brush, toothbrush and wooden toothpick.

Choose a glass container for cleaning baths, a small container, but so that the solution can completely cover all the products dipped into it.

Solutions for cleaning gold from dirt and plaque

Medical ammonia (buy at the pharmacy) in the amount of 1 tablespoon, dissolve in half a glass of water and add a tablespoon of washing powder. Stir well until the powder is completely dissolved.

Gold items are immersed in this cleaning solution for 2-4 hours. All you have to do is wait, and then rinse the gold jewelry in running water and lay it out on a clean cloth to dry.

Dish detergent

Liquid dishwashing detergent perfectly dissolves grease and dirt, which is exactly what we need when cleaning gold at home. To prepare a working solution, dissolve a tablespoon of the product in a glass of water.

Place the gold in a small saucepan or mug on a napkin. Pour in the prepared solution and put on fire. Boiling should last about 10 minutes. Foam bubbles will knock out dirt from the most inaccessible places. This method is especially good for cleaning gold chains.

Rinse jewelry under running water and dry.

Liquid soap and hydrogen peroxide.

If you want to clean gold at home without any effort, use the following method.

In a glass of water, dissolve 1 tablespoon of ammonia, 1 teaspoon of liquid soap or shampoo and 40 ml bottle of hydrogen peroxide 3%.

Dip gold items that need cleaning into the solution and leave overnight. In the morning, rinse and dry. All dirt and grease will be gone, and your rings and earrings will sparkle.

Using salt to purify gold is another cheap and effective method. Dissolve 3 tablespoons of salt in half a glass of boiling water. Prepare a supersaturated saline solution. Dip gold chains, rings, brooches into it and leave overnight. In the morning, rinse and dry. The effect is amazing, like after polishing.

Line a container with food foil and place your decorations on it. Dissolve 2 tablespoons of baking soda in a glass of hot water and pour in the gold. After 10-12 hours, wash and dry. We are happy with the result.

How to clean white gold at home

The peculiarity of white gold is that it is an alloy of metals, coated on top with a thin layer of a special metal - rhodium. This layer is easily erased and scratched, so for white gold products you need to use the most gentle methods that eliminate friction.

These simple products work well for cleaning white gold at home.

3 spoons of ammonia, 3 spoons of water, 1 spoon of shampoo. Exposure time: 10 minutes.

2 spoons of shampoo, half a glass of water. Leave for 30 minutes.

Do not use aggressive chemical solutions or water containing chlorine to clean white gold. After soaking in the cleaning solution, the white gold is washed with filtered water and dried.

Cleaning gold jewelry with stones

If your gold jewelry has stones, normal cleaning methods will not work. Since the stone itself and the glue on which it is set can be subject to destruction. How to clean stones and settings? The following funds will do:

vodka
eau de toilette or cologne
refined gasoline

For cleaning, use ear sticks and natural bristle paint brushes. Movements should be soft and gentle. After cleaning, gold jewelry with stones is wiped with a damp soft cloth and dried.

How to clean gold jewelry with a matte surface

Gold with a matte surface came into fashion relatively recently, but has gained popularity. how to clean matte gold at home? It is worth noting that in this case you cannot use powders and brushes, as well as rough fabrics, so as not to spoil the surface.

Solutions:

25% ammonia solution. The product is immersed for 2 hours, then washed and dried.

Dissolve 1 teaspoon of lime in a glass of water, add a teaspoon of soda and a pinch of salt. Exposure - 3 hours, then rinsing and drying.

How to make gold cleaning paste

If the above cleaning methods do not help, you will have to resort to a mechanical method. For this you will need a special paste from a jewelry workshop or a paste you prepare yourself.

1 part toothpaste;
1 part Vaseline;
1 part household soap;
1 part chalk;
4 parts water.

Apply the paste to the surface of the ring or earrings and wipe with a soft cloth in one direction. Then rinse with vodka or wipe with alcohol to remove petroleum jelly, rinse with water and dry.

Proven traditional methods for cleaning gold

Proven folk remedies for purifying gold include:

dentifrice;
lipstick;
chalk with ammonia;
beer with beaten egg white;
onion juice;
lemon juice;
Apple vinegar.

We hope that we have collected enough useful information for you about refining gold at home. But to avoid having to clean it frequently, wear and store gold jewelry correctly and do not expose it to harsh chemicals or contaminants. Remember, gold is a decoration, not an everyday accessory, unless of course it is an engagement ring.

published on chemicalvet.ru according to the materials umnye-sovety.ru

Published by: Inga Proznich

Source: https://cemicvet.mediasole.ru/kak_pochistit_zoloto_v_domashnih_usloviyah

How to quickly and effectively clean gold and gold jewelry (bracelet, chains, rings, etc.) at home, what you can use for cleaning

Over time, gold items may lose their original glossy shine, which was so caressing to the eye upon purchase. How can you return your favorite jewelry to its original appearance and make it sparkle again, like the day you bought it? There are many ways - at least one of them will probably suit you.

Preparing jewelry for cleaning

To make cleaning gold take as little effort as possible, and to remove plaque and dirt more easily, you should soak the jewelry overnight in salt water before cleaning:

Dissolve two tablespoons of salt in one glass of water.
Place the jewelry in a saline solution for eight hours.
Rinse the gold thoroughly in warm running water.

Traditional methods

If you don’t have the opportunity or desire to go to the store for special jewelry cleaning products, try one of the proven folk remedies. All of them are based on simple ingredients that are likely to be found in almost every home.

Traditional medicines can cause allergies. Before using any of them, make sure that you do not have an allergic reaction to this product. To do this, you can apply a drop of gold cleaner to the crook of your elbow. If the skin begins to become red, itchy, or swollen, it may be best to use a different product or take precautions, such as wearing rubber gloves while cleaning.

Ammonia and washing powder

To effectively clean gold jewelry from plaque and tarnish, use a simple and proven recipe:

Dilute a teaspoon of ammonia 10% and a couple of pinches of washing powder in a glass of water.
Boil the resulting solution for a minute and remove it from the heat.
Place the decorations in the hot solution for two hours.
Rinse the items in running water. Make sure that there is no product left on them - prolonged contact with such aggressive substances will negatively affect the condition of the gold coating.

Ammonia solution, or ammonia, is an effective means for purifying gold.

Dishwashing liquid

Jewelry can be removed from plaque and discoloration using dishwashing liquid, which can be found in any kitchen.

It turns out that with its help you can wash not only dishes, but also your favorite jewelry from plaque:

Dissolve 1 teaspoon of cleaning product in 250 ml of warm water.
Place the decorations in the solution and place the container with them in a water bath.
Boil the products for 5–10 minutes.
Rinse off any remaining product and dry the jewelry with a clean cloth.

Dishwashing liquid is found in almost every home -

Liquid soap and hydrogen peroxide

If you have liquid hand soap and a bottle of hydrogen peroxide in the house, use this simple method for treating gold from tarnishing:

Add one fluff of soap and two tablespoons of peroxide to a glass of warm water.
Stir to create a soapy solution.
Place the decoration in the mixture and leave for 20 minutes.
Thoroughly rinse the foam off the gold and dry with a towel.

Liquid soap is very inexpensive, but it cleans gold well of plaque and tarnish.

Soda and foil

To use this method, you will need regular baking soda and baking foil (you can use chocolate foil if you don't have a baking roll):

Place a sheet of foil at the bottom of the container.
Fill the container with warm water.
Dissolve a couple of tablespoons of baking soda in it. Stir thoroughly so that there are no lumps or large sediment left.
Place the decoration in the mixture for 20 minutes.
Rinse the product in running water.

Baking soda and foil are very effective at “pulling” dirt out of jewelry.

Egg white and beer

An unusual, but no less effective method will require the white of one egg and half a glass of any beer (you can use both dark and light):

Mix the beer with the egg white, whisking the mixture a little.
Dip a clean cloth into the resulting liquid. To further polish your jewelry, use microfiber.
Wipe the jewelry, paying special attention to hard-to-reach places where plaque has accumulated.

Beer removes plaque from gold jewelry well, and protein polishes the gold surface

Dentifrice

This cleaning is not suitable for delicate items: white, matte gold, jewelry with coral or pearls, as well as gilding. For this method, in addition to the powder, you will also need an old toothbrush with soft bristles:

Apply a little powder to the brush.
Gently, without pressing, clean the surface of the decoration.
Rinse off the powder with water, paying particular attention to the various small indentations and decorative patterns on the item. Make sure that small particles of powder do not get stuck in the jewelry - this will have an extremely bad effect on the condition of the gold surface.

Tooth powder is easy to find in stores - this is one of the most affordable ways to clean gold at home

Lipstick

Another simple and affordable method is to treat gold with lipstick. This method will help restore the jewelry’s bright color and former shine.

To do this, you will need a colorless hygienic lipstick and a clean cloth:

Apply a little lipstick to a piece of cloth.
Rub the gold piece gently, polishing any tarnished areas.
Rinse the jewelry in waste water, removing any remaining product.

Almost every person has chapstick, but not everyone knows that it can be used to clean gold.

There is an alternative way to treat jewelry with chapstick. Apply lipstick directly to the darkened areas, then use a cotton pad to wipe and polish the product, then rinse and dry.

Special means

In addition to simple folk remedies, there are special solutions and pastes designed specifically for cleaning jewelry. Their price, as well as their effectiveness, can be completely different. Check out our selection of the best (according to customers) home cleaning products for gold jewelry:

"Flyurin."
The preparation is suitable for cleaning different types of gold (yellow, white, matte), but is not recommended for use on products with inserts made of pearls, corals, mother-of-pearl. It is also not suitable for blackened metal - if there is an artificial coating of oxide on the gold, then Flurin can wash it off, leaving unsightly stains and removing the vintage treatment. The cost of the drug starts from 100 rubles per 100 ml bottle.

It can be seen that the chain has become much cleaner, but there is still no shine, like after cleaning at a jeweler.

Yuliabart

Source: https://domovod.guru/chistka-i-uhod/kak-pochistit-zoloto-v-domashnih-usloviyah.html