Using a skate sharpener
Skates do not require special care. The main rules are to dry them after use, sharpen them on time and make sure that the blades do not become rusty. To do this you need a special skate sharpener. To sharpen them, it is not enough to use a sharpening machine; a U-shaped groove is machined into the blade.
What does sharpening give?
Several reasons to regularly sharpen your skates:
- the athlete gains confidence and a sense of perseverance on the ice;
- well-sharpened blades help control balance on ice;
- sharp blades help perform rotations, accelerate and perform elements;
- sliding becomes smoother;
- A dull blade increases the risk of injury.
Devices and tools
Let's look at what tools there are for sharpening skates with your own hands:
- The abrasive touchstone is a slingshot for skates with a plastic handle. On-line editing of blades. The tool removes burrs left after sharpening. The movements are carried out smoothly, without pressure, so as not to cut off the groove. To get the best results, it is recommended to use lubricant or wet the blades with running water. They only trim the blades, but do not sharpen them.
- A whetstone is an abrasive material for straightening a blade after sharpening.
- Edge Again is a handheld, portable skate sharpener.
What is the best way to sharpen?
Each equipment owner decides independently which device to use for sharpening skates. An at-home procedure or a manual skate sharpener will not replace a professional one, especially for serious sports.
Sharpening machines
The most popular machines for sharpening skates are nordway and ProSharp, they have been tested in practice. Instructions on how to use the Nordway machine:
- Turn on the machine.
- When the circle's motion becomes stationary, apply the blade to the circle, pointing it to the left, against the disc, along the edge.
- Repeat the procedure three times, adjusting the shape of the edge.
- Adjust the movement of the support bar as necessary.
If you have no experience with such devices, first try an experiment on an old pair.
Consumables
Additional components expand the capabilities of the machine:
- vices - they can be universal, for any pair, or they can be selected professionally for a specific sport;
- diamond discs for sharpening equipment, they vary in color and diameter;
- adapters from larger to smaller diameter;
- diamond groove pencils;
- whetstones, for removing burrs.
Specifics
Sharpening skates has its own characteristics. Before the process, it is clarified where exactly the athlete will play - on artificial or natural ice, weight category, skating style. When playing hockey, an important parameter is the place on the team as an attacker, goalkeeper or defender.
The depth of the groove is adjusted depending on the use of the equipment:
- in figure skating it reaches 5-6 mm;
- for hockey - 20mm;
- for speed skating - 45mm.
If burrs are found on the equipment, sharpening is not necessary.
Signs that equipment needs sharpening
How to understand that it’s time to sharpen your skates:
- there is no groove on the blade or it is covered with rust;
- when a turn is made, the blades move to the side;
- the runners slide during repulsion.
How to carry out the procedure at home
You will need:
- A vice for clamping the dies, otherwise the skate will slip out.
- A needle file is a round file. With its help, the groove becomes even.
- A block with a hole the width of the blade.
How to sharpen:
- Place the equipment horizontally, clamping it with a vice. Place a block with a file inside on top.
- Use a file to make a hole. Move it sideways until the groove becomes noticeable.
- Continue the procedure until a sharp edge appears.
Now sanding is done: wrap the file in sandpaper and run it along the blade without touching the edge.
Methods
There are two sharpening methods: straight and grooved. Skates go on sale straight sharpened. But in practice, this method does not justify itself. Although high speed is achieved and there is the possibility of sharp braking, maneuverability comes to naught.
Sharpening under the gutter develops the same speed as a straight line, makes movements maneuverable, but braking is difficult. It is preferred by hockey players and figure skating athletes.
FTB - sharpening. Used on European ice, but rarely used in Russia. European matches are played on artificial ice, so the emphasis is not on speed, but on the grip of the blade with the surface.
How to distinguish sharpened equipment
Let's look at several visual signs of sharpened equipment. A sharpened pair of skates has a groove on the inside. The lateral ribs are sharp and of equal thickness. Sports palaces will help you get the job done professionally.
Source: https://sportotip.ru/vidy-sporta/konki-na-ldu/ispolzovanie-tochilki-dlya-konkov/
How to sharpen skates at home: features of the process
Ice skating is the most popular sport in which not only skill is important, but also equipment. That is, skates should not only sit comfortably and firmly on the foot. Their blades must be sharp enough. In this article you will learn how to sharpen skates at home.
Why is this procedure necessary?
In order for you to be able to skate freely on ice, you need to pay special attention to the blades. A lot depends on the correctness of the sharpening procedure: how you will gain acceleration, whether you will be able to brake in time, how well the complex elements of the program will be completed.
Proper sharpening of the blades makes it possible to maintain maximum stability on ice. You need to perform the procedure when your riding speed is lost, you cannot brake quickly, or you feel slipping while riding.
Also, before sharpening your skates at home, take a closer look at the surface of the blades to see if they have scratches, burrs or other damage. In addition, the groove is an important point. Thanks to it, the stability, maneuverability, and tilt of the skates during turns are controlled.
New blades may not have a groove, so sharpening is a mandatory procedure that must be repeated periodically.
To begin, be sure to collect all the necessary equipment. Before sharpening your skates at home, prepare the following tools:
— a sharpening machine with an abrasive wheel;
- a vice or other tools that can fix the blade at the required angle;
- fine-grained whetstone;
- sandpaper;
- round file.
When selecting tools, you should pay attention to the fact that the hardness of the metal from which the file or bar is made must be much higher than the hardness of the alloy from which the blades are made.
Features of sharpening skates without groove
In principle, this method does not require much effort, as it is the simplest.
The main principle of this method is to sharpen the sole of the blade at a right angle relative to its side walls. To work in this case, use either sandpaper or a file. Moreover, the second tool is preferable, because it must be harder than the alloy from which the blades are made. However, you will have to work longer with a file.
How to properly treat skates if they have a groove?
Here you will have to work a little. Moreover, the sharpening accuracy must be very high, otherwise you may simply damage the blades. To work, you will need sandpaper and a round file. Before you sharpen your skates at home using these tools, inspect them. If you need to deepen or make a groove, use sandpaper.
Next, a file comes into play, the diameter of which should be no more than 10 mm. Using this tool, try to get the shape of the gutter as correctly as possible. At the same time, you will also process the edges.
Please note that the groove depth should not exceed 0.6 mm. As for sharpening the edges of the blade, the correctness of the procedure should be periodically checked. To do this, you need to place your skates on a very flat surface.
If the work is done accurately, the blades will be strictly perpendicular.
Lastly, you should go over the metal with a fine-grained stone, which should finally remove all burrs and other defects from the surface. So you know how to sharpen skates using simple tools. Now you need to understand how to perform this procedure using special equipment.
How to properly sharpen skates using a machine?
To make the process as simple and fast as possible, you should use special equipment. Before sharpening your skates at home, buy a special machine in which you will have to remove the horizontal stop, because it will only get in the way. It is best if the unit is equipped with a vertical guide, which should be fixed at a distance of 2 cm from the edge of the disk.
Naturally, you can immediately buy a machine that is ideal for sharpening skates. Otherwise, you will have to slightly modify your device. Now let's start actually sharpening. To do this, the heel end of the skate must be placed down towards the guide. Now the blade should be slightly pressed against the rotating disk at the desired angle. Next, you need to slowly move the skate down. Try not to press the skate too hard against the abrasive wheel, as you can easily burn it out.
Try to perform all actions carefully: wear safety glasses and protective clothing, and work with gloves. Hold the skate tightly so that it does not fly out of your hands. Please note that the circle must rotate away from you, otherwise sparks will fly straight into your eyes! After using the machine, you will have to do a little manual work: run an abrasive stone along the blade to remove burrs or scratches from the metal surface. Now you know how to properly sharpen your skates. Good luck!
Source: https://FB.ru/article/141362/kak-natochit-konki-v-domashnih-usloviyah-osobennosti-protsessa
Is it possible to sharpen skates with a grinder?
How to sharpen skates at home : features of the process
Ice skating is the most popular sport in which not only skill is important, but also equipment. That is, skates should not only sit comfortably and firmly on the foot. Their blades must be sharp enough. In this article you will learn how to sharpen skates at home.
What tools are needed for the job?
To begin, be sure to collect all the necessary equipment. Before sharpening your skates at home , prepare the following tools:
- a vice or other tools that can fix the blade at the required angle;
- fine-grained whetstone;
When selecting tools, you should pay attention to the fact that the hardness of the metal from which the file or bar is made must be much higher than the hardness of the alloy from which the blades are made.
Skate sharpening machine
Homemade machine for cutting grooves on skates . Contacts for sharpening skates follow the link.
Sharpen your skates at home. Express skate sharpening.BAUER. Express sharpening skates
skate sharpener every time , especially since I had to spend a lot of time on it.
Skate sharpener: sharpening methods, important requirements. Wow little block! Or a pocket sharpener (rule) for skates What is the best way to sharpen
In this article we will talk about skate sharpening machines presented on Aliexpress .
Each sports equipment requires careful care and preparation. How the athlete performs directly depends on this. In this case, sharpening is important for skates. Moreover, this is necessary not only for professionals, but also for those who like to ride. It is fashionable to purchase a special machine on Aliexpress at a competitive price.
Skate sharpening machine on Aliexpress: catalog, photo
Skates today are extremely popular not only in professional sports, but also among recreational skaters. To use one pair of skates for a long time, you need to wear them out periodically. The very first devices were somewhat primitive, but with the development of technology they also changed. Modern skate sharpening machines consist of a rotating grinding disc and two diamonds that can work on any surface.
Today, electronic models of devices are very popular, allowing you to make some settings and use skates based on their parameters. For some machines, the program is capable of saving and reproducing these parameters.
The purpose of the machine is to make skating convenient and fast. Stability on ice depends on how well they are sharpened. Today, manufacturers are actively creating universal devices, as well as highly specialized ones that can work with only one type of blade.
It is worth noting that each type of skate has its own sharpening characteristics, and therefore you should choose a machine based on what products you plan to work with.
As a rule, skate sharpening machines have:
- Blade holder with screws
- Metal dust suction device
- Abrasive discs and diamond wheel
- Swivel lever for smooth sliding along the blade of the working tool
How to make a machine for sharpening skates with your own hands?
A ready-made skate sharpening machine is not that cheap, so not all novice athletes can afford such a purchase. In this case, you can buy a used unit or make it yourself.
Such machines will allow you to manually sharpen skates with a stone. This is a very simple equipment suitable for beginners and amateur professionals. You can watch the video to see how to properly make the machine yourself.
Skate sharpening machine on Aliexpress: sale, discounts, free shipping
There are also small promotions that are held every day. These include: , “Discounts of the day in the Mall” , and. And you can find out about current sales on the Aliexpress in a special block:
Don't forget the possibility of receiving cashback. It is provided through special services. We talked about the most popular ones.
Hello, friends! Well, summer has begun here, and we need to prepare for winter now, so as not to be like that turtle from the old Soviet cartoon, which always did not make it at the right time of year. I invite all curious people to visit under cat.
When skating on city open-air skating rinks, you should not trust the constancy of the ice surface, because the asphalt is hidden everywhere, but 5-10 such holes and the skates slowly begin to get bites on the edges of the blade.
For a long time, the thought did not leave me: “If the Chinese counterfeited the Apex Edge Pro for sharpening knives, and quite efficiently, then they could come up with something for sharpening skates?” And yet, yes, they came up with it (or copied it), it doesn’t matter at all, the subject exists, without thinking for a long time, I found it on Ali, grabbed the card, ordered it and waited.
What can I say, I haven’t found such devices on Ali anymore, and the seller’s orders for it can be counted on the finger of one hand. Let me point out right away that I’m not saying that this is a professional sharpener and it is a panacea, no, excuse me. This is just a pocket rule and nothing more.
Source: https://stdpro.ru/instructions/tochilka-dlya-konkov-sposoby-zatachivaniya-vazhnye-trebovaniya-nichego-sebe.html
