How to sharpen nail clippers at home: effective tips – Fashionable look
Sharpening manicure tools is a very important process. This is especially true for those tools that have just been purchased, because it is not a fact that tweezers, nippers or other manicure tools were carefully sharpened at the manufacturer’s factory.
Sharpening is also necessary for those manicure accessories that are used for a long time, since over time they can wear down and become dull. That's why at one point you may need to sharpen your manicure tools.
What types of sharpening exist?
Today there are only two ways to sharpen manicure tools:
Of course, hand sharpening is much better than factory sharpening or, as it is also called, container sharpening.
Factory-sharpened tools, as a rule, do not last a long time, and their blades do not cut along their entire length, since they are sharpened differently and are not very sharp.
But even if, when purchasing manicure tools that are factory sharpened, they suddenly turn out to be very sharp, this does not mean at all that they will remain so after several times of use.
Manual sharpening of manicure tools is a real art that requires diligent attention and, of course, perseverance, as well as confident movements. The manual sharpening process takes place using a special sharpener, which is equipped with a diamond-coated metal wheel.
Sharpening tools at home
Most modern women do their own manicure at home, because going to the salon takes quite a lot of time.
But what if, during a manicure, your favorite scissors or the nippers began to painfully pull on the skin? Of course, you can take them to a special workshop and there they will be restored to their former sharpness, but you can sharpen your favorite manicure accessories at home. To do this, you need to have a few things on hand:
- A whetstone used to sharpen kitchen knives;
- Sandpaper;
- Foil
- Napkin;
You can sharpen manicure tools quite quickly. You just need to take a sharpener for kitchen knives, open the tongs, wire cutters or scissors as wide as possible and carefully begin sharpening them. The main rule when sharpening is smoothness; you should not make very sudden movements.
Another simple way to sharpen manicure tools at home is with sandpaper. For greater convenience, you can attach it with tape to a nail file or a straight surface. To begin with, attach coarse sandpaper with a grain size of 500-600 and grind the chamfers of the cutting surfaces with it, then attach a finer one (size 1000-1500) and bring the surface to a perfectly smooth surface.
The easiest way to sharpen manicure tools is to take foil, fold it in several layers, and start cutting strips; the more strips we cut, the better the sharpening of the tool will be.
It doesn’t matter how the tools were sharpened, the main thing after this procedure is to clean the blades from dust and plaque and treat them with warm water.
Sharpening level
Making manicure accessories sharp may not be so difficult; it is more difficult to know the degree of sharpening.
To check it, you need to take a small piece of polyethylene, preferably thin, and test the tool on it. The main thing is not to put too much pressure on it, but to make smooth and soft movements.
If the tool is well sharpened, it will leave a smooth mark behind it, without any torn edges.
Equipment for professional sharpening
Any master who constantly sharpens manicure tools has special equipment for this. As a rule, only two types of machines are used in this matter:
The easiest way to sharpen is on a laser machine, but it also has its drawbacks. With such sharpening, the risk of wear on the blades of the tool increases. During operation, the laser beam greatly removes the thickness of the metal and therefore it becomes brittle.
Sharpening on a mechanical machine is a little more difficult than on the previous one, but, nevertheless, it maintains the strength of the tool and does not shorten its service life.
Manicure is very important for most people and therefore should be taken very seriously. First of all, you should select only high-quality tools for working with nails and take their choice seriously.
After all, the health of your nails and skin depends on what tools you use to perform your manicure. That is why it is best to purchase only professional accessories or tools from well-known brands.
Well, of course, you need to pay attention to the sharpening of tools in order to ensure comfortable and convenient work.
Source: https://fashionshape.ru/kak-v-domashnix-usloviyax-zatochit-shhipchiki-dlya-manikyura-dejstvennye-sovety.html
How to sharpen wire cutters with your own hands. 5 MAIN FACTORS, without which nothing will work
5 main factors without which nothing will work
IMPORTANT NOTE:
1. It is shown more clearly and clearly in the video. Look it up.
2. This article is much more convenient to view from a computer than from a smartphone.
If you are interested in learning how to sharpen wire cutters as a business and a way to make money, then click the button to learn more about it.
Go to the Academy
How to sharpen wire cutters with your own hands
Here I will talk about 5 main factors that determine whether you succeed or not.
Today there are a huge number of videos on how wire cutters are sharpened. There is a description on various sites that make money from advertising and attracting traffic, and the quality of the information there is of very questionable quality. There is a lot of information on this matter, but it is still not clear how to sharpen it yourself.
I watched a lot of videos and didn’t see a description of the most important thing anywhere.
The very main thing on which it all depends .
What I have seen is that sharpeners often intentionally make this topic very difficult. They create mystery, like: “We sharpen on special machines” “This is our special paste” “This is our special something else” Everything is special and they have nothing simple.
But the truth is that the essence of sharpening wire cutters is very simple!
All sharpening of wire cutters comes down to:
to achieve the presence of 5 factors.
But before I talk about them, answer yourself one question.
So you want to learn how to sharpen wire cutters yourself at home.
Fine. The question is simple: “Why do you need this?”
That is, if you want to save money, you won’t be able to save money. You will waste time. It's also worth something. Put in the effort. You will need some equipment, expensive or inexpensive, but in any case you will need something.
Therefore, it makes more economic sense to give the wire cutters to someone who already knows how.
Give the wire cutters to a professional for sharpening.
Today, sharpening wire cutters costs about 300 rubles. Personally, our cost has not changed since 2009. For almost nine years. As we sharpened at this price, we continue to sharpen. It's available to anyone.
The only justified, in my opinion, reason why you should sharpen wire cutters at home is that there is not a single sharpening master in your city, region, country or planet.
If this is the case, and you are determined to learn this, then this article and video will allow you to learn the most important things. The basis. The basics.
5 factors that determine whether the nippers will cut or not are the basis of any technology for sharpening nippers .
That is, no matter what method of sharpening you use - whether on diamond wheels, or needle files, or any other abrasive things - they all come down to these five factors.
All methods, all sharpening technologies come down to consistently introducing 5 factors and, thereby, getting the cutters to perform their functions.
What is the purpose of wire cutters?
The answer seems obvious. The purpose of cuticle cutters is to cut the cuticle.
That is, they should cut the cuticle easily and effortlessly, without catching, pinching, biting or wringing. The person presses the handles of the cutters and the cuticle is cut. And this is the purpose of the existence of wire cutters.
What determines whether the nippers will cut or not?
It depends on having 5 factors which you get one after another. One by one. And as soon as they are all installed, the nippers will cut.
If you know WHAT you should get,
If you know WHY you should get it,
If you know HOW you should get it, then a little practice and everything will work out.
Use some kind of sharpening technology and practice.
1. The cutters should not rest
What this means is that ANYWHERE in the joint, in the rivet, or between the handles that prevents the cutter blade from closing. It's logical. If something gets in the way, the blades will not close and will not cut anything.
Inspect everything carefully and remove any obstacles on the machine or with a file.
2. The cutters should not dangle.
This means that there should be no play. There should be no movement of the blades relative to each other.
Backlash is one of the most common problems with wire cutters. And if the cutters are loose in the rivet, you won't be able to line up the cutting edges. The blades will constantly jump relative to each other and pinch and pinch the cuticle.
Using a core and a hammer, tighten the pressure on the two halves of the pliers so that they do not wobble.
3. The internal planes of the cutters must be smooth.
It is important! Do not allow any transitions on planes or undercuts!
If there is a break in the plane on the inner surface, then when further adjusting the cutting edges you will find that you cannot remove the hole and achieve proper closure.
Always ensure that the inside of the wire cutter blades are straight and on the same plane.
4. The convergence of the cutting edges must be correct.
The blades should close easily from tip to heel , with minimal clearance.
Any deviations from what is written above lead to a deterioration in the cutting quality of the nippers.
Wrong:
- converge from the tip to the heel, but you need to press hard on the handles so that the entire canvas shrinks;
- converge from the middle, then the tip and heel;
- begin to converge from the heel to the tip; The tip closes, then the heel and there remains a hole in the middle.
The nippers perform their function perfectly only when they close easily from tip to heel WITHOUT additional squeezing force.
5. There should be no burrs on the cutting edges.
A burr on the cutting edge will significantly degrade cutting quality.
When adjusting the clamp, a burr always remains on the cutting edge. If you do not remove it, the nippers will pinch and pull the cuticle. Soon the hangnail will bend or fall off, and the cutters will become dull again or a gap will appear. Therefore it must be completely removed.
At the end of sharpening, be sure to remove the burr using a polishing wheel.
If you have sharpened your pliers and ensured that all five of these factors are in place, then the pliers will cut.
If at least one of them is missed, then the cutters will cut poorly or will not cut at all.
If you have done everything, implemented all five factors, but the wire cutters are not cutting, then you should take a closer look to see if some of them are missing. That is, either they are stuck somewhere, or during the sharpening process they began to play a little somewhere, or you messed up the toe somewhere. Something will definitely happen.
And this is the essence of sharpening wire cutters.
And it all depends on whether the nippers will cut or not.
If you can ensure that the cutters do not rest, do not wobble, have a smooth internal plane, have the correct toe and no burrs, then your cutters will cut. And it doesn’t matter how you did it - on diamond wheels or with a file.
If you cannot achieve this, then, accordingly, it does not matter what equipment was used, even for 50 kopecks, even for a million euros.
Watch the video where all these points are presented more clearly.
watch the video
5 main factors without which nothing will work
author Alexey Novikov
share this on social networks
Source: https://Jecky.ru/blog/kak-zatochit-kusachki-svoimi-rukami-5-glavnyh-faktorov-bez-kotoryh-nichego-ne-poluchitsya
When and how to sharpen a manicure tool correctly
Choosing and purchasing a manicure tool is only half the battle, since it requires constant and high-quality maintenance and sharpening.
New scissors or forceps can become dull after just a few uses, and some need to be brought into good working condition immediately after purchase. It all depends on the quality of the metal and the initial characteristics of the tool.
What does a manicurist need to know about sharpening manicure tools? Is it possible and how to sharpen nail scissors, tongs and cutters at home? How to evaluate and accept a job in the service? Let's look at all the questions in order.
Types of sharpening
There are two directions:
- Conveyor or factory processing
- Manual sharpening
The factory one is of lower quality and often the sharpness is lost after the first 10-15 uses. Even if the blades are initially very sharp, they dull much faster compared to manual processing. Also, the blades may have different sharpness along the length, which is why forceps or scissors tear the cuticle and leave burrs.
Sharpening by hand requires experience, knowledge and skill. It is better to contact a professional in the workshop to get the desired result. Many craftsmen try to sharpen scissors and pliers at home using improvised tools. Yes, perhaps the sharpness will be enough for a couple more procedures, but after that it is still lost, and the service technician has to do more work to eliminate the consequences of home sharpening.
What professional equipment is used for sharpening manicure tools?
Where can you sharpen nail scissors, tweezers, and cutters if you have given up on home experiments and decided to entrust the tools to a professional? There are special workshops that carry out maintenance of manicure equipment.
On average, the cost of such a procedure starts from 300 rubles, and varies depending on the city and country of residence. Many craftsmen in big cities complain that the cost of the service is almost comparable to the purchase of new tools, but this is only if you compare inventory of low and medium price categories. If you are working with high quality products, it is better not to take risks and contact a workshop.
There are two types of professional sharpening machines:
The first ones are equipped with a diamond-coated metal grinding wheel, which, when rotated, grinds down the edges of the tools, giving them the desired sharpness. The method keeps the tool durable and does not shorten the service life.
A laser machine is easier to use, but it wears down the metal faster, making it more fragile. Where to sharpen manicure tools after this? Of course, where the craftsman does it with a high level of quality, regardless of what machine is used.
Basic rules for sharpening tools
There are several key points that make up the algorithm for servicing manicure equipment. If all points are completed, we get the desired result.
- When closing scissors, forceps or cutters, nothing should prevent the handles from coming together. If such a problem arises during work, they must be taken to the workshop and all interfering or protruding parts must be ground off on the machine. At home, you can do this with a sharpening stone or rasp, being careful.
- Nippers, cutters and scissors should not dangle, there should be no gap between the cutting planes and at the point of connection of the handles.
- The cutting planes of the nippers should be smooth and close without gaps under gentle pressure.
- The convergence of the cutting edges in the nippers should be uniform from one edge to the other, and not wavy: first the tip, and then the heel, or vice versa.
- The blades should not have protrusions or burrs that catch, scratch or cut the skin.
- The outer edge of the pusher should be sharper than the inner one, and the inner one should have a straight line without jagged edges. The main task of the tool is to move the skin, not cut it.
When sharpening, all factors must be met to obtain the desired result.
Sharpening of pliers, skin tongs, tweezers. If the cutters are loose, they are stuffed at the junction of the blades. They should walk softly and close in an even line. The inside of the nippers is ground down to a straight line from the inside. When closing, the blades should be in the same plane, neither higher nor lower than one another. If there are burrs on the tips of the cutters, they need to be sanded down.
Sharpening pushers. After processing, they should be sharp, but not cut the skin. They should also not scratch the nail. If the pusher falls and bends, the edge is leveled and then ground down. The pusher is always sharpened on the outside, and only polished on the inside. It is necessary to ensure that the outer edges are not sharp; they should also be ground and sanded.
All types of pushers - comparison, characteristics, operating rules
Sharpening nail scissors.
If the blades were deformed after a fall, the edge will have to be ground down. If the damage is significant, then most often the scissors cannot be repaired. If the deformation is small, then grinding helps eliminate it, but the length of the blades will be reduced.
When sharpening scissors, only the front surface is removed. You cannot go into the rear one; it was processed only once at the factory, and this is enough for the entire operating cycle.
After each grinding of a layer, it is necessary to remove the metal grain from the blades so as not to damage them when closing.
Nail scissors - types, proper use, choosing the best
The sharpening angle of the scissors must correspond to the factory rake angle and cannot be changed. Usually it is 60-75°.
At the final stage, it is recommended to go over the blades with fine-grained sandpaper to remove burrs.
Sharpening manicure knives. They are used mainly for pedicures, to remove rough skin and corns. The manicure knife should not be very sharp; the factory angle should be maintained and the edge should not be ground into a bayonet.
How and with what to check the sharpening level
Even a professional manicure cannot be done with a blunt instrument. That is why regular maintenance of tongs, scissors, and tweezers is necessary. With a large flow of clients in the salon, maintenance of scissors and cutters may be required once every two to three weeks. With a lower flow - much less often.
To understand when it's time to sharpen your manicure tools, there are a number of simple tests. They will require the following materials to choose from:
- Thin plastic bag
- Stretch film
- Dried wet wipe made of non-woven material
- Elastic vinyl, latex or nitrile gloves
These same tests will allow you to check the quality of the work performed by the master. In the workshop, these tests are used to check each of the processing stages of blades and cutting edges.
Methods and instructions on how to check the quality and level of sharpening:
- We fix the thin plastic bag so that the edge is even. Unclench the scissors, tongs or wire cutters, place the edge of the bag between them, and close along the entire length. The blades should not tear, snag or pull the polyethylene.
- Stretch film is the most demanding material for checking the level of sharpening. The principle is the same - we fix the film and close the blades along its entire length. The cut should be smooth.
- A napkin made of non-woven material demonstrates well the presence of burrs on metal. With high-quality processing, the cut is smooth, without snagging on the blade.
- Vinyl or nitrile gloves should be secured between the thumb and forefinger, the cutting edges should be completely opened and closed, placing the glove sheet between the blades, and then pulled down slightly towards you. Often scissors or tongs cut well at the base, but the closed edge pulls the glove and tears it. This means it's time to sharpen the blades again.
Proper sharpening of manicure tools at home
How to sharpen manicure tweezers, scissors and nippers at home? This can be done at home using a grinding wheel or by hand. If you don't have experience with this, it's better to ask someone who has tried it or knows how to do it. Otherwise, you need to take the manicure tools to the workshop.
If you still decide to carry out the procedure at home, you will need:
- Sharpening stone or rasp
- Sandpaper, hard and sanding
- Any of the above materials to check the level of sharpening
A block or rasp is suitable for processing large areas. They should work smoothly, respecting the factory angles. Next, the blades are sanded with sandpaper. It can be secured with tape to the handle of a spoon or a wide nail file for additional support.
You can get by with just sandpaper, first 600 grit and then 1500 grit, to smooth out any burrs on the metal.
Some craftsmen use foil folded in 4-8 layers, finely cutting it with a tool to the desired degree of sharpening. Reviews about this method are mixed, so if you have an expensive, high-quality instrument, it’s better not to risk it.
Everyone should mind their own business, and if possible, it is better to have the tools serviced by a professional. If you decide to do the treatment at home, follow all recommendations.
Source: https://nails-mag.ru/instrumenty/zatochka-instrumentov-dlya-manikyura-zatochka-manikyurnyih-nozhnits-kusachek-pusherov/
Sharpening nail clippers at home: methods and techniques
After purchasing a manicure tool, sharpening it is an integral procedure. After all, only with the help of sharp devices is it possible to create an impeccable manicure. Accurate sharpening of nail clippers is a responsible task. After all, they are considered one of the most complex instruments. This is explained by the fact that the cutters have a complex geometry, which makes it quite difficult to get the correct angles.
Varieties
Any newly purchased manicure instrument must be sharpened before use. Sometimes you can still purchase nail clippers that don't require this. But this is only if we are talking about expensive brands. Sharpening nail clippers can be done using the following methods:
- With the help of a professional master. In this case, at the appointed time, the specialist will arrive at the specified address and, using a diamond wheel, will sharpen the tool.
- At home (manual sharpening of nail clippers).
- With the help of a certified professional in the workshop. In this case, you need to come to a master who will sharpen the tool at his own workplace.
How to do this at home?
Sharpening nail scissors and nail clippers differs significantly. The latter are much more difficult to work with. This is explained primarily by their shape. In order to sharpen nail clippers at home, you need to perform the following steps:
- Before proceeding directly to the operation, you need to unscrew the instrument.
- They should be sharpened from the inside of the blade.
- After sharpening, it is imperative to check the sharpness of the tweezers. It is important to sand areas that will come into contact with the skin.
To ensure that sharpening of nail clippers at home is done efficiently, experts recommend purchasing the proper tools for this. This:
- machine with diamond wheels;
- polishing cloths;
- felt sheets;
- polishing stones;
- whetstone.
The listed devices for sharpening nail clippers will greatly facilitate the procedure and ensure an ideal result.
Basic Rules
Proper tool processing plays a significant role. To achieve maximum results, during sharpening you must adhere to the following rules:
- First unscrew all the tools, as these steps will help significantly simplify the process and prevent quite probable malfunctions.
- When working with a diamond machine, it should be turned on at minimum speed, and sharpening, of course, should be carried out only in one direction.
- In addition to polishing, it is also necessary to grind the instrument.
- When sharpening, it is strictly forbidden to use whetstones whose abrasive content is less than recommended. Otherwise, actions may lead to irreparable damage to the instrument.
- It is imperative to keep in mind that each manicure tool has a certain sharpening angle. Otherwise, its cutting ability can be seriously reduced.
- Before the procedure, if it is performed for the first time, it is best to practice on some other instrument. This way you can prevent damage to your expensive nail clippers.
- When working with diamond wheels, careful attention is required when sharpening. This is especially true for corners, which are usually very thin.
- When sharpening a tool, it is important to remember your own safety measures.
After processing the nail clippers is completed, you must check the quality of the work done. After all, only a properly sharpened tool will help prevent injuries during use.
When sharpening nail clippers at home, it is imperative to focus on the following nuances:
- on the edges of the tweezers - they, of course, should be not only smooth, but also perfectly even;
- It is imperative to check whether a gap has formed between the cutting edges;
- Tweezers must be checked for the presence of all screws, which must be firmly secured.
Application of a grinding wheel
You can sharpen nail clippers efficiently at home using a sharpening machine. But this can only be done if you have experience working with such equipment.
Otherwise, improper handling of the tool may result in injury. The most suitable option is to sharpen nail clippers on a fine-grained diamond-coated sharpening wheel.
When processing manicure tools using a sharpening machine, you must adhere to the following rules:
- Backlash needs to be installed. To do this you will need a thick rod. You need to place one end of it at the junction of the blades, and gently tap the other end with a hammer.
- First, the inner side of the blade is sharpened, and only after that the outer side.
During work, it is necessary to set the lowest speed on the machine. You need to move the edge of the blade in one direction along the rotating circle. After sharpening, the machine should be turned off and the tool must be wiped with a polishing block. This is necessary to align the edges of the blade.
Other processing methods
At home, you can sharpen nail clippers in various ways. One of the simplest is the method using sandpaper. Despite the fact that when choosing this method, sharpening will have to be carried out relatively more often, much less effort will have to be expended.
As practice shows, processing manicure tools at home is quite simple, provided that you have the necessary tools and materials at hand.
Conclusion
As you can see, sharpening nail clippers can be done in different ways. You can do this yourself, but, as practice shows, for a high-quality result it is better to seek qualified help and forget about this problem for a long time.
Source: https://FB.ru/article/463596/zatochka-manikyurnyih-kusachek-v-domashnih-usloviyah-sposobyi-i-metodyi
How to sharpen nail clippers
Proper tool processing plays a significant role. To achieve maximum results, during sharpening you must adhere to the following rules:
- First unscrew all the tools, as these steps will help significantly simplify the process and prevent quite probable malfunctions.
- When working with a diamond machine, it should be turned on at minimum speed, and sharpening, of course, should be carried out only in one direction.
- In addition to polishing, it is also necessary to grind the instrument.
- When sharpening, it is strictly forbidden to use whetstones whose abrasive content is less than recommended. Otherwise, actions may lead to irreparable damage to the instrument.
- It is imperative to keep in mind that each manicure tool has a certain sharpening angle. Otherwise, its cutting ability can be seriously reduced.
- Before the procedure, if it is performed for the first time, it is best to practice on some other instrument. This way you can prevent damage to your expensive nail clippers.
- When working with diamond wheels, careful attention is required when sharpening. This is especially true for corners, which are usually very thin.
- When sharpening a tool, it is important to remember your own safety measures.
Knife sharpening stone
How to sharpen nail scissors at home with such a whetstone? Not everyone has machines with diamond wheels at home, although they are among the most effective sharpening options. Processing is easy:
- We need to open the scissors.
- The blades are sharpened one by one with a whetstone. It is important that the movements are sharp and fast.
- Quality is checked using polyethylene. You need to cut it with sharpened scissors and evaluate the result. It is important that the edges of the polyethylene are smooth. If the effect is different, the tool is sharpened again. The surface of the scissors is treated with a smooth cloth. The blade should be free of dust and lint.
Important nuances
Experts recommend sharpening manicure tools every six months. There are several ways to process them. To determine whether this procedure is necessary, you should examine the appearance of the devices. If they are inconvenient to use, and there are dark spots on the edge, then sharpening is required.
The procedure must be performed immediately after these signs are detected. The larger the stain, the longer and more difficult the preparation is required. Before this, you will need to process the scissors, otherwise the result will be minimal. Sometimes he doesn't follow at all.
Sandpaper
This method is quite fast, but it is advisable to use it occasionally. How to sharpen nail scissors with sandpaper? You should choose sandpaper with any abrasive. The sheet must be folded in half. Then several cuts are made with scissors.
The blades will be sharp for a short time. But after 2-3 manicure procedures they will need to be sharpened again. The frequency of processing is determined by the quality of the steel from which the device is made. If you are not sure of an excellent result, it is better to take the tool to a workshop.
Preparation
Before sharpening manicure tools, preparatory work is required:
- It is necessary to check for play. If it is there, then you need to remove it: tighten the bolt that holds the 2 halves of the scissors together. It is important that the blades lie tightly to each other. Sometimes loosening the backlash is necessary to sharpen the blade. There should be a small gap in the connection area.
- It is necessary to remove dirt using a smooth cloth treated with an antibacterial agent. The tool must be wiped.
- It is necessary to check if there are any defects. If the fastening is weak, tighten it with pliers. The screw should be tightened with a screwdriver. This must be done carefully to protect against damage to the mechanism. If the blades are connected with a rivet, a small hammer is used.
- If there are nicks, creases, stains, or rust, it is advisable to take the scissors to a workshop, where the defects will be eliminated.
- You should not boil the tool before sharpening, as this will quickly cause it to rust and fail. Antiseptic agents are used for disinfection.
After preparing for manual sharpening, the nail scissors are ready. At the same time, there are several effective and safe ways to process devices.
Checking the sharpness
After processing the nail clippers is completed, you must check the quality of the work done. After all, only a properly sharpened tool will help prevent injuries during use.
When sharpening nail clippers at home, it is imperative to focus on the following nuances:
- on the edges of the tweezers - they, of course, should be not only smooth, but also perfectly even;
- It is imperative to check whether a gap has formed between the cutting edges;
- Tweezers must be checked for the presence of all screws, which must be firmly secured.
After sharpening, to protect against injury during use, you need to check the result. To do this, you need to pay attention to the following nuances:
- The edges of the tweezers should be smooth and even. It is important to check if there is a gap between the cutting edges.
- You need to tug the tweezers in your hand to make sure that all the screws are securely fastened.
We invite you to read: Rules for sterilizing manicure instruments
Only with high-quality sharpening a beautiful and neat manicure is ensured. Therefore, it is important to perform this treatment regularly, preventing the manicure tools from becoming unusable.
Diamond wheel machine
How to sharpen nail scissors at home using this method? The procedure is carried out as follows:
- The minimum speed is set.
- The blades of the tool must be passed one by one along the diamond wheel. The canvases must be pressed with one force.
- Then the machine is turned off and the quality of the blade sharpening is checked. The result can be checked on paper. You should cut the paper sheet and evaluate the quality. You need to wipe the instrument and try to trim the nail. If necessary, stronger sharpening is performed.
Care
Before work, you need to check the quality of sharpening and place the tool with the cutting surface facing up. You should work carefully, without sudden movements, and after work, clean them from any remaining skin and nails with a special brush. The device should be disinfected and sterilized, and at the end of the procedure, lubricate it with a few drops of oil.
The instrument must be packaged in a special case or case; you should also put a cap on the cutting surface or place the scissors in a craft bag to maintain sterility. Sharpening must be done regularly. After work, do not throw the scissors into your cosmetic bag or on the table.
Source: https://qarita.ru/natochit-shchipchiki-manikyura/
Principles of sharpening manicure instruments
To restore the attractiveness of your nails and remove interfering hangnails, you need to use tweezers, scissors, and a file. However, after prolonged use of these devices, the cutting edges become dull. To restore their sharpness, you need to know how to sharpen manicure tools.
Set of manicure tools
What types of sharpening are there?
There are two types of sharpening manicure tools. Each of them has certain features that need to be taken into account when restoring sharpness and working with cutting edges:
- Factory - contrary to the opinion of many people, it is considered a bad option for high-quality, long-term work. The edges do not cut materials along the entire length, and sharpening is not completed. If the working parts are sharp, they will become dull much faster than after professional sharpening.
- Manual - sharpening of manicure tools, which is performed using various devices. These include diamond bars and round abrasive stones. The quality depends on the chosen method of sharpening and the skill of the person.
We must not forget that manual sharpening requires perseverance and attentiveness from the master.
What professional equipment is used for sharpening manicure tools?
Sharpening of manicure tools is carried out in specialized workshops. The cost of sharpening depends on the type of device, the level of skill of the worker, and the status of the workshop. The average price is 300 rubles.
Due to the fact that sharpening can cost quite a bit of money, many manicurists advise ordering a similar procedure when it comes to working with expensive, high-quality tools that would be a shame to ruin if you try to sharpen them yourself.
To perform the procedure, craftsmen use specialized machines:
- Laser - modern high-precision installations that allow you to work equally effectively with different alloys and metals.
- Mechanical - common machines that are equipped with diamond-coated round grinding wheels.
Working with mechanical equipment is much more difficult. This is due to the fact that you need to choose the right number of revolutions and use water cooling. In addition to this, it is necessary to slowly move the cutting edge relative to the abrasive so that turning occurs evenly along its entire length.
Sharpening small tools
Cuticle nippers
Step-by-step instructions for sharpening nail clippers at home:
- Initially, you need to eliminate the backlash. To do this, you need to open the wire cutters, place them on the table, and lightly tap them with a hammer.
- Clean the joints and cutting edges from dirt and dust. Degrease them.
- Use a file to remove rough edges from the blades. Movements should be leisurely.
- Close the cutters. Place them on the table, the edges should be on top. Use smooth movements of the file to remove irregularities.
Using a fine-grain stone (about 8000 grit), go along the cutting edges. After this, lubricate the moving element with oil.
Nail clippers
Nail clippers can be sharpened using sharpening stones of different grits or sandpaper. Step-by-step instruction:
- Clean the tweezers from dirt and debris.
- Degrease working parts with alcohol.
- Sand them with coarse, finishing sandpaper. Remove visual irregularities. Run your fingers along the edges. If the metal scratches the skin, you need to repeat the treatment with an abrasive.
Remove metal dust with a cloth.
File
Nail files made from glass are becoming increasingly popular. Their advantage is that after processing the nail plates, they do not delaminate. If the file becomes dull, there is no need to throw it away. You need to take the tool to a specialized workshop for resharpening.
Tweezers
Tweezers are a secondary manicure tool. Sharpening it is no different from the procedure for sharpening cuticle nippers.
How and with what to check the sharpening level?
After carrying out the procedure for resharpening manicure tools, it is necessary to check its sharpness. To do this, you can try cutting several materials:
- stretch film;
- vinyl or latex gloves;
- plastic bag;
- wet wipe.
There should be no difficulty in cutting. If you have to apply more force, you need to treat the working parts with abrasive again. In addition to cutting, you can determine the sharpness by running your fingers along the cutting edge without pressing. Metal should not cling to the skin or leave marks.
Latex gloves for testing sharpness
Useful tips
Recommendations:
- Inexpensive tools do not need to be taken apart. Poor quality fasteners may not withstand being disconnected and reconnected.
- When working with a sharpening machine, it is necessary to set low speed. High rotation speed will damage the cutting edge.
- After purchasing a tool, you need to remember its angle. It must be adhered to during sharpening.
- If you need to sharpen professional manicure tools, it is advisable to use the services of professionals. Carrying out the procedure yourself requires practical experience. To do this, you can practice on old instruments.
- Wear safety glasses when operating the sharpening machine.
- Bars less than 8000 grit are used to smooth out serious damage and chips. If there are no such problems, you should not choose stones less than 8000 grit.
- Do not forget about regular lubrication of moving elements with oil (machine oil, vegetable oil).
- Store tools in a dry case without access to moisture. Constant moisture will cause rust to form.
- After work, clean tweezers, scissors, files, tweezers from dirt and debris.
- A simple option to restore the sharpness of nail scissors is to cut the foil. The sharper the blades are needed, the more cuts required.
It is strictly forbidden to change the angle of the cutting edges, which was made by the manufacturer.
Sharpening manicure instruments is a responsible procedure that will help restore sharpness and perform work more efficiently.
However, in order not to permanently spoil the cutting edges, it is necessary to take into account a number of nuances and recommendations of professionals. If it is not possible to spend enough time for sharpening, you need to contact a specialized workshop. Repair and sharpening of manicure scissors and nippers
Principles of sharpening manicure instruments Link to main publication
Source: https://metalloy.ru/obrabotka/zatochka/manikyurnyh-instrumentov
How to sharpen a manicure tool
Sharpening manicure tools is a very important process. This is especially true for those tools that have just been purchased, because it is not a fact that tweezers, nippers or other manicure tools were carefully sharpened at the manufacturer’s factory.
Sharpening is also necessary for those manicure accessories that are used for a long time, since over time they can wear down and become dull. That's why at one point you may need to sharpen your manicure tools.
How to sharpen a manicure tool at home
Sharpening manicure tools is a very important process. This is especially true for those tools that have just been purchased, because it is not a fact that tweezers, nippers or other manicure tools were carefully sharpened at the manufacturer’s factory. Sharpening is also necessary for those manicure accessories that are used for a long time, since over time they can wear down and become dull. That's why at one point you may need to sharpen your manicure tools.
Sharpening manicure tools: general information
Sharpening manicure tools, especially new ones, or “blanks” as masters call them, is an extremely necessary thing.
This can be explained by the fact that the sharpening of manicure tweezers, nippers or other equipment in a factory environment is not always of high quality and suitable for work. Only expensive instruments such as Olton and Henckels can be used immediately after purchase.
But even they, after a while, become dull and begin to “tear off” instead of “cutting”. Therefore, sooner or later any tool must be sharpened.
What is “Manual sharpening of manicure instruments”? In most cases, “hand sharpening” means sharpening of manicure tools by a master. It is often also called “individual”. This means that a person comes with his equipment to a master sharpener and the tools are sharpened in the way he needs, and the work itself is done with a diamond stone under a microscope.
Professional sharpening of manicure instruments is the processing of equipment by a master working in a specialized company or enterprise. Such people, as a rule, take special courses in sharpening tools and have quite a lot of work experience. The sharpening itself in such cases is carried out using special machines and appropriate diamond wheels.
If you contact a highly qualified specialist, the sharpening of nail clippers or tweezers will be performed without defects, and the service life will be at least six months even under the heaviest loads. In both the first and second cases, craftsmen can use various machines and tools, but the quality depends little on this.
Proper sharpening always gives a positive result, regardless of the equipment. It is also worth remembering that only specialists know how to sharpen nail clippers or tweezers. You should not sharpen tools yourself at home: this can lead to irreparable damage to the blades or subsequent injury to the master or client.
Sharpening tools for manicure: what needs to be sharpened and how to check the quality of sharpening
Most often, sharpening requires nail and cuticle nippers, tweezers, and manicure scissors. Some craftsmen also send pushers for sharpening. Despite the fact that only a master knows how to sharpen nail clippers, scissors, etc. That's right, anyone can check the quality of his work.
There are certain techniques for this, depending on the type of instrument:
- Cuticle nippers and scissors. To determine the degree of their sharpness, special “T-shirts” are used - small plastic bags or sheets of the same fabric. As a rule, such “shirts” are available in all specialized stores and sharpening specialists. The essence of the test is to pull the edge of the polyethylene between your fingers and try to cut it. If the sharpening of manicure tools is carried out efficiently, a cut with smooth, clear edges will remain on the “T-shirt”. If the polyethylene is “chewed”, feel free to return the tool to the master for revision; the sharpening was carried out incorrectly. Some craftsmen also use wet paper, sketchbook paper or toilet paper for this purpose, but polyethylene is the most informative in this regard.
- Tools for working with the nail plate. The essence of checking the sharpness of nail clippers or scissors is similar to cuticle tools, but in this case a different material is used. Most often, insulating tape or thick paper (for example, printer paper) is used as the test material. The result should also correspond to the test on polyethylene - a clear cut without “torn” edges or “chewing”.
The frequency with which manicure tools are sharpened depends on many factors.
The quality of the craftsman's work . Everything is simple here - the better the sharpening of manicure tools, the longer they will remain sharp. With high-quality sharpening, the tool can remain in excellent condition for 10-12 months.
Working conditions . The service life of manicure tools directly depends on the amount of work they perform. Well-sharpened instruments, when used exclusively for personal use, can maintain their sharpness for more than 1.5 years, while in a popular beauty salon this period will not exceed 3-4 months.
The quality of the tools themselves . Higher quality tools can maintain their sharpness for a longer period of time compared to budget options, even with similar sharpening quality. The essence of this difference lies in the more wear-resistant alloy from which the tool is made, which can increase the service life by 2-4 months.
Terms of use and storage of tools . Craftsmen who use covers for their tools, regularly lubricate them, carry out timely disinfection and do not sharpen them at home, sharpen 1-3 months less often than their other colleagues.
What is the danger of a freshly sharpened tool? Tools that have just been in the hands of a master and have undergone high-quality sharpening are, as a rule, much sharper than they were before.
This must be taken into account when starting to work with them - they cut off the cuticle or nail plate more severely. With the slightest carelessness, this can lead to a deep cut or cutting off the nail too much.
You should also always follow safety precautions, as improper storage or carelessness can cause significant harm to yourself or others.
Sharpening manicure tools at home.
If there is an urgent need to quickly sharpen tools or there is no opportunity to contact a master sharpener, sharpening manicure tools can be done at home.
It is worth mentioning that this procedure is quite dangerous: both for the person doing the sharpening and for the tool itself. Also, you should not expect long-term or high-quality results - this is only a temporary, one-time solution.
Sharpening of nail clippers, manicure tweezers at home and by a qualified craftsman
To sharpen at home, you need to use a regular whetstone for sharpening kitchen knives. Next, take the dull tool, spread it as far as possible and sharpen it smoothly using a whetstone, avoiding sudden movements. You can also use sandpaper, but in this case it is difficult to achieve a more or less decent result. After sharpening, the tool must be treated with an antiseptic and wiped with a dry cloth.
How is manicure tools sharpened by a professional? Professionals, as a rule, perform two types of sharpening: manual (individual) and machine.
- Machine sharpening of manicure clippers and sharpening of manicure tweezers is carried out by a specialist using a special machine and attachments: a diamond and polishing wheel and a felt washer. With their help, the master sharpens the tool, aligns the edges of the blades and eliminates jagged edges. Machine sharpening is much faster than manual sharpening and eliminates the possibility of damaging the structure of the blades themselves. However, 1 tool can withstand from 8 to 12 sharpenings, depending on the initial dimensions of the “blank”.
- Sharpening manicure clippers and sharpening manicure tweezers “by hand” involves the work of a master using a diamond stone under a microscope, when every millimeter of the blade is sharpened. In this case, the quality of work is usually higher, but the professionalism of the craftsman plays a big role here. But there is always a risk of causing irreparable damage to the blades. Also, the speed of work completion directly depends on the work experience and skills of the master sharpener. The average tool can undergo 25-35 such sharpenings.
Source: http://NogtiPro.com/manikjur/zatochka-manikjurnyh-instrumentov/
How to sharpen nail clippers at home
- July 25, 2018
- Nail care
- Ksenia Stepanishcheva
Many women prefer to do their manicures at home. For this, various tools are used, including special scissors. But poorly sharpened tools will not help get your nails in order. How to sharpen nail scissors at home is described in the article.
Using a needle
This is an old method of processing tools. How to properly sharpen nail scissors with a needle? It must be placed between the blades and moved along the surface with sliding movements. Although the effect is not brilliant, it is an excellent method for those who need to sharpen devices quickly and inexpensively.
Foil
This is another answer to the question of how to sharpen nail scissors at home. Use kitchen foil or chocolate packaging. It must be folded in several layers and cut into strips. Dull edges must be smoothed.
Sandpaper
This method is quite fast, but it is advisable to use it occasionally. How to sharpen nail scissors with sandpaper? You should choose sandpaper with any abrasive. The sheet must be folded in half. Then several cuts are made with scissors.
The blades will be sharp for a short time. But after 2-3 manicure procedures they will need to be sharpened again. The frequency of processing is determined by the quality of the steel from which the device is made. If you are not sure of an excellent result, it is better to take the tool to a workshop.
Sharpening manicure tools
The quality of work depends on the sharpening of the manicure devices. Therefore, it is important to follow the rules that allow this processing to be carried out with excellent results:
- Before sharpening, the tools are unscrewed. This is necessary to eliminate damage and make work easier during sharpening.
- The machine must be operated at minimum speed. The sharpening area should not be more than 0.3 mm, and always in one direction.
- In addition to polishing, sanding is required.
- You should not use polishing stones with an abrasive less than recommended (up to 8 thousand grit), otherwise the device will be damaged.
- It should be remembered that all devices that need sharpness adjustment have their own sharpening angle. Therefore, when processing manually, you must remember this, otherwise there is a risk of damage to the cutting function.
- To prevent damage to the device, you need to practice on a different type of tool, as there is a risk of poor sharpening.
- When using diamond wheels, you must be careful when sharpening the corners of the tweezers, as they are very thin, so the cutting edge can easily change.
- It is necessary to take into account safety - be careful and use safety equipment (masks, goggles, gloves).
Sharpening is required for all tools used for manicure. This applies to cuticle nippers, manicure tweezers, nail files, tweezers and other devices. Only with careful care will you be able to perform a neat and high-quality manicure.
Checking the result
After sharpening, to protect against injury during use, you need to check the result. To do this, you need to pay attention to the following nuances:
- The edges of the tweezers should be smooth and even. It is important to check if there is a gap between the cutting edges.
- You need to tug the tweezers in your hand to make sure that all the screws are securely fastened.
Only with high-quality sharpening a beautiful and neat manicure is ensured. Therefore, it is important to perform this treatment regularly, preventing the manicure tools from becoming unusable.
