How to sharpen a razor cartridge

How to sharpen razor blades on a cassette

How to sharpen a razor cartridge

Numerous manufacturers of men's accessories and shaving accessories offer disposable and reusable razors with blades made of quality materials. But sooner or later, any blade will begin to lose its properties, especially if you do not provide the machine with decent care, proper operation and storage. In this regard, experts offer many techniques for sharpening machine blades, many of which can be used at home.

Many men know how to sharpen a razor at home, since several ancient methods have been practiced for many years. Today, many new ideas have been invented that also sharpen blades quickly and easily, extending their service life. It is only important to follow all the details and instructions, otherwise you may damage the sharp cutting surface.

Sharpening a razor at home: what is important to know

Many men believe that sharpening blades for a machine is an unlikely or completely useless task. Especially considering the fact that there is a huge assortment of new blades and cassettes on sale in stores. In fact, high-quality razors cost a lot of money, as do blades for such models. Therefore, experts recommend saving money and sharpening blades, unless, of course, you use a cheap disposable razor.

Only a few types of razors can be sharpened using this method:

  • disposable machine;
  • reusable razors with cassettes;
  • T-shaped machines.

If, in addition to proper use and care, the blades are sharpened, a man will be able to provide himself with high-quality wet shaving and save money on the purchase of a machine or blades. Otherwise, the blades will not only cut hairs poorly and pull them out, but also scrape off the top layer of skin. An important condition for sharpening is to follow the instructions for all stages, otherwise you can dull the cutting surface even more.

Step by step guide

Today, the most pressing request from men in forums and communities is as follows - how to sharpen the blades of a Vest razor. This manufacturer offers high-quality machines with replaceable cassettes, which you can easily extend the shelf life yourself, without the help of a specialist. Most often, two devices are used for this action - a pyramid razor blade sharpener or ordinary denim.

You can make a pyramid yourself from a material that is incapable of magnetization, for example, plexiglass or cardboard. It is secured with glue or tape; it is prohibited to use metal fasteners. Further sharpening is carried out as follows:

  • mark the pyramid on a hard, straight surface;
  • then the pyramid is oriented to the cardinal points;
  • the razor blades should be placed along the pyramid in the north-south direction;
  • the blades should lie in this state under the pyramid for 6-8 hours.

Source: https://vi-pole.ru/kak-natochit-lezvija-britvy-na-kassete.html

Choosing containers for sowing and growing tomatoes

How to sharpen a razor cartridge

Gardeners are already starting to prepare containers for sowing seeds. Everyone has their own preferences, some prepare milk cartons, make paper cylinders, others go to the garden center for civilized containers.

Tomato seedlings are most often grown with picking, so to begin with, you need small bowls, from which the plants with the first true leaves are transplanted into larger pots.

Many amateurs do without picking, immediately sowing the seeds in separate containers; good germination of the tomato allows them to avoid large losses. If there are enough seeds, then you can sow 2-3 pieces in a pot, and then select and leave the best seedling.

Let's figure out what containers our gardeners usually use to grow tomato seedlings.

PVC or polystyrene containers

Plastic containers can usually be purchased as a set, which includes a tray and individual or connected pots. They must have holes for water drainage. You can find sets with a lid, real miniature greenhouses. They are very convenient; you do not have to cover the crops with film or glass until shoots emerge.

THIS IS INTERESTING:  What is metal straightening

Containers make it easy to transport seedlings to the dacha; plants with a clump can be quickly removed from separate containers and injuries to the root system can be minimized. Cassettes are less convenient; it is more difficult to remove plants from them, because You cannot turn each container over individually. Ready-made containers are very practical, but if you grow a lot of seedlings, then purchasing them can be quite hard on your wallet. Costs can only be offset by repeated use of these devices.

Peat pots

Peat pots are made from peat, with cardboard or paper added to the mixture. The highest quality pots, made from around 70% peat, are best suited for growing plants.

In such pots, seedlings can be planted in a garden bed without disturbing the earthen ball with roots - the natural material decomposes in the soil and does not interfere with root growth. However, there are often pots on sale that consist mainly of pressed cardboard, and it does not decompose well in the soil.

When planting in the ground in such pots, it is necessary to tear the walls and bottom to allow the roots to grow. Otherwise, the root system will not develop, and the plants will wither and die.

Peat pots have some disadvantages; the plants in them need to be watered regularly and the soil should not be allowed to dry out or become waterlogged. Dried soil becomes very hard and pulls away from the walls. When the pots are overwatered, mold often develops, and the roots may die or lag in development.

Peat tablets

There are several types of peat tablets on sale; they are made from pressed fine peat, which is packaged in a thin mesh fabric. Before sowing, the tablets are filled with water until they swell completely, and they increase in size. Then the seeds are placed in them. This capacity is not enough for a tomato to fully develop, so over time it will be necessary to transplant the seedlings from the tablet into a larger pot. This can be done without damaging the roots.

Manufacturers sometimes indicate that you can plant the whole tablet, with mesh fabric. However, from the experience of many gardeners, it is known that it often interferes with root growth. Therefore, when transplanting, it is better to remove or cut it. The disadvantages of peat tablets include their rather high cost and the need to strictly control soil moisture, just as in the case of peat pots.

Bags and other food containers

Milk and juice cartons, cups for sour cream and other products, disposable plastic tableware are an affordable option for many gardeners. Such containers must be thoroughly washed to remove any remaining dairy products so as not to introduce unwanted microorganisms and cause putrefactive processes in the soil.

Be sure to make several holes in the bottom and place the containers in a tray to drain the water. For tomatoes, tetra-pack bags cut by one third or half, as well as sour cream glasses with a capacity of 350-500 ml, are best suited.

Initially, you can pour about half the volume of soil into them, and gradually add it as the seedlings grow.

The tomato easily forms adventitious roots on the stem, resulting in the formation of a fairly powerful root system. Bags with a square section are the most practical; they allow you to put more seedlings on a pallet and save precious space on the windowsill. Such containers are very convenient; when planting, you can simply cut the paper bags and carefully remove the lump of earth with roots. Diligent gardeners use thick plastic glasses for several seasons.

Paper or plastic cups

You can make small cups from paper or film with your own hands. Strips of the required height are cut from any suitable material, leaving an allowance for the bottom. Take a cylinder of suitable diameter (5-7 cm), you can use, for example, a wooden masher.

THIS IS INTERESTING:  What is the gold color code?

The cylinder is wrapped in film or paper, folding the allowance at the bottom, and the walls are secured with a stapler or paper clips. Cups made of film or thick paper leave a hole for water to drain. The finished containers are filled with soil and placed tightly in a tray.

Film cups hold moisture well; in paper containers the soil dries out quickly, so you need to carefully monitor watering.

Such homemade cups are suitable if you are growing seedlings for a short time and can quickly transplant them into the ground or greenhouse. However, they are too small for long-term residence of seedlings; over time, it will be necessary to transfer the plants into pots of larger diameter. When planting, you need to cut the cups, it is better to throw away the paper ones, since they will decompose in the ground for a long time, and the film, if desired, can be washed and reused.

Toilet paper rolls

Cardboard rolls from toilet paper or paper towels are a good temporary replacement for seedling pots. Their diameter is usually about 5 cm; long towel rolls can be easily cut in half to get two cups. Such containers need to be watered regularly so that the soil does not dry out. In addition, when constantly moistened, they tear easily. They are not suitable for long-term use; seedlings can be grown in them temporarily and then transferred to other containers.

Tea bags

Some gardeners use tea bags, and tea leaves are also used, it is mixed with soil to loosen, and the bags are refilled. The result is something like peat tablets. The bags are suitable for the first stages of tomato growth, until a large volume is required for root development, and then the seedlings need to be replanted.

Paper snails

Snails made from paper or film are used for growing seedlings to save space. This method most likely came from laboratory practice, in which researchers germinate seeds in rolls of filter paper. At the same time, it is convenient to carry out observations by unrolling the roll and recording the growth of roots and shoots.

Gardeners have perfected the method for their own purposes. A layer of soil about 1 cm thick is poured onto a strip of paper; in the upper part of the strip, approximately corresponding to the sowing depth, the seeds are laid out, rolled up and placed in a strong, deep container. Water as needed.

This method is well suited for the initial germination of seeds, until picking or a little longer. If you leave the seedlings to grow in this roll for a long time, you will have to regularly unroll the paper or film, add soil and wrap it again, disturbing the roots. As a result, the root system will form in one plane, and it will be very difficult to transplant the plant into another container or into the ground without damage.

Plastic bottles

Regular plastic bottles with a volume of 1-1.5 liters are suitable for making a mini-greenhouse or an individual pot. You need to remove the middle part of the bottle. The lower part, 8-10 cm high, will serve as a pot, and the top with the neck will serve as a lid for the greenhouse. Holes for drainage must be made in the bottom. The lid of such a greenhouse can be made removable or hinged by securing it to the bottom with adhesive tape. To ventilate, simply remove the plug.

A plastic bottle works great as a seed germination tray. The bottle is cut lengthwise, the halves are placed on their sides and filled with soil. The tomato can be sown in such a tray and kept in it until picking. It is important to make holes in plastic containers to allow water to drain. It is advisable to wrap transparent bottles with thick paper or foil to prevent blue-green algae from multiplying in the soil in the light.

Collapsible cassettes

A skilled craftsman can make a container for seedlings with collapsible cells. To do this, you need to insert prepared plywood or plastic strips with slots into a low (10-12 cm) plastic or wooden pallet. The slats are connected into a lattice, forming individual cells.

The distance between the slots is determined as necessary (5-10 cm). If you plan to keep the seedlings in such a box for the entire period before planting in the ground, then the volume of the cell should be sufficient for the development of roots.

THIS IS INTERESTING:  How to clean silver in citric acid

For germination and subsequent replanting, you can make small cells with a side of 5 cm.

Egg cartons

Cardboard and plastic egg boxes are useful for germinating tomato seeds. These are small containers; it is impossible to pour enough soil into them for large seedlings. At first, before picking, the seedlings will feel normal there. In cardboard boxes, you need to regularly water the crops and seedlings, and in plastic boxes, be sure to make holes for water drainage. Both types will require a pallet.

https://www.youtube.com/watch?v=tFmLA3pet7k

What to grow tomato seedlings in - in ready-made beautiful factory containers or in homemade containers - is not so important. The main thing is to provide the plants with care, which will allow you to enjoy delicious ripe fruits by the end of the season.

Source: https://www.ogorod.ru/ru/ogorod/seedling/15930/Vybiraem-emkosti-dlya-poseva-i-vyrashchivaniya-tomatov.htm

Dirty dishes: why should they not be left to soak overnight?

How to sharpen a razor cartridge

Alla

  • 1. Frying pans - special attention
  • 2. Take care of your dishes

We love receiving guests. We celebrate various holidays at home. Which, of course, cannot do without feasts.

We prepare all kinds of goodies. And, of course, a lot of dishes accumulate. Agree that you don’t really want to wash it after going out.

What do we do most of the time? That's right, fill the dirty dishes with water. So that by morning, they say, she gets wet.

And in the morning, with fresh strength, we begin to wash everything. As experts assure, this should not be done under any circumstances.

Especially if the same pans have not yet had time to cool down after cooking. Now we’ll tell you why this happens.

We are sure that after reading our article you will make it a rule to wash dishes as soon as they stop being hot.

And in the morning your sink will be clean. And all the dishes are washed.

Frying pans - special attention

Most of us don't use regular frying pans for decades like we used to.

And this is not surprising. Today you can buy excellent cookware at reasonable prices. And change it as needed. After all, you always want to cook with something new.

In frying pans, where nothing burns. The result is a golden brown crust. And let’s say you purchased new frying pans for your kitchen. Such that you will no longer feel ashamed in front of guests and family members.

Once you've cooked the same dinner, you don't need to immediately fill the pan with water. Let it cool down first.

According to the manufacturers, otherwise the non-stick coating will deteriorate.

And even the most expensive and high-quality frying pan can quickly become unusable. Look at what manufacturers write in the instructions for using cookware. It turns out that they warn the owners about all this. But which of us reads all these instructions?

Take care of your dishes

There is no need to artificially cool the dishes either. Let the pan and your other kitchen items cool at room temperature.

There is no need to place hot dishes, for example, in a bowl of water. This will negatively affect the condition of the dishes.

And it is not advisable to leave dishes dirty all night. And, moreover, leave it in this form for a longer time.

Don't be lazy to do everything at once. Washing dishes, you see, does not take as long as it might seem at first glance.

Moreover, with those household chemicals that are sold today in specialized stores.

We're not talking about if you have a dishwasher. With her, the process does not speed up. But definitely not so power-intensive.

Turn on the microwave at maximum power. Leave the plate with lemon to spin for a couple of minutes. And then wipe the walls of the microwave oven with a damp cloth. In just moments, your microwave will be like new again.

Take care of your dishes and household appliances. Good luck, readers!

00

Source: https://www.kazportal.kz/gryaznaya-posuda-po-kakim-prichinam-nelzya-ee-ostavlyat-otmachivatsya-na-vsyu-noch/

Did you like the article? Share with friends:
Metals and their processing
-- Sideb lion (lipk) -->
How to properly connect a welding inverter

Close
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]