What is more expensive: yellow or white gold?

What is more expensive - white or yellow gold? Differences, differences, chemical composition, application

Jewelry made of precious metals - gold, in particular - is luxurious and elegant, in which the metal itself and inclusions of precious and semi-precious stones are perfectly combined. Beauty, which never ceases to be fashionable, is valued much more than silver jewelry. What is more expensive - white or yellow gold? Jewelers make masterpieces from any shades in a classic or fashionable direction.

But jewelry, in addition to design, also differs in appearance, color and cost of the materials from which they are created. For such purposes, gold of various shades is used - yellow, red and white. What is cheaper - white or yellow gold?

They all look incomparable, but questions arise about which material is more valuable, better quality and how they differ from each other.

Shades of gold

The purest gold alloy (pure gold) has an admixture of secondary metals no higher than ten percent and a fineness equal to or higher than 915. This composition is almost entirely gold, and its price is very high. At the same time, it is soft and flexible; you can crush it with your fingers without much effort. Of course, it is irrational to make jewelry from such material.

The only way to compensate for this shortcoming is to increase the weight, and therefore the cost of the jewelry. Small rings or earrings made of 999 fine alloy will deform in a short time, and, accordingly, there will be no demand for them. To significantly increase service life, it should weigh from 7 grams. Its price will become prohibitively high.

It was the move away from the high cost and limited designs of jewelry that led to the introduction of an additional component or several into the alloy. This causes the color of the final metal to change.

And if earlier in the windows there were jewelry of only three colors - yellow, red and white, now on sale there are products in shades of green, blue, purple, etc. There are fans of such exotic things, but there are few of them.

Therefore, they decorate products made from traditional alloys.

As you already understand, the designation “golden” is relative when applied to jewelry. Jewelers use an alloy for their work; it differs in color and cost. So what is more expensive - white or yellow gold?

The percentage of impurities in the alloy is reflected in the sample. Let’s say the fineness of a product is 585, then it contains 585 parts of gold, and the rest of 415 units is occupied by other metals.

By introducing a certain amount of copper, silver, palladium, zinc and nickel components, the shades of the resulting metal are determined.

Yellow gold is obtained by combining gold, silver and copper components. This classic, symbolizing prosperity, is still relevant today. It has many shades - from light to dark, depending on the mass fraction of silver.

Red gold is practically indistinguishable in composition from yellow gold, with the exception of copper content - there is a lot of it here. Copper colors alloys red. They were the only ones distributed in the Union.

White metal is achieved by adding nickel, palladium, platinum, and silver. In appearance it resembles platinum, but has a cheaper price.

Nickel is used less and less in the modern world, as it causes an allergic reaction in the body and has been banned in several countries. Plus, it gets dark pretty quickly. A mixture of gold and platinum is more noble and durable, but the price of such products is very high.

What's better? White or yellow gold? Reviews are mixed. Metal of any shade has a certain hallmark, and alloys of different colors have the same hallmark. This is not fraud, but only means that the precious metal is added to them in the same amount.

But the color is determined by the number of additional components, and this changes the cost. For example, the price of platinum is very high, which means the price of alloys with gold will become much higher.

Red gold

Our grandparents remember him very well. Several colors were put on sale - from dark to light.

Jewelry made of red gold is less noble, but still relevant in the modern world. It is “fitted” into complex elements as part of the decor.

Such inserts added to watches, rings, and bracelets look amazing. By experimenting with additives, scientists have created pink shades of the metal. They quickly gained popularity due to their relatively low cost. So what is more expensive - white or yellow gold? Or maybe red shades or pink? Let's find out!

Yellow metallic shade

Gold in yellow has always symbolized wealth and success. There is light lemon, and there is dark. In contrast to red, it is much more versatile and goes better with inserts of precious and semi-precious stones.

The advantages of this alloy include:

• Hue - ligatures (ratio of metals) allow you to get warm colors.
• Universal - suitable for everyone, regardless of skin color or hair.
• Varied - the shape of jewelry can be simple, intricate, with or without stones.
• Affordable - due to the absence of expensive additional metals in the alloy, they are much cheaper.

White alloy

It has become the most popular alloy of precious metals, much more affordable than platinum jewelry. Previously, nickel was added to the composition, but due to its harmful effects on the human body, it was banned. Therefore, the cost of white gold has increased greatly. This is due to the fact that the incoming additives are often much more expensive than the base metal.

The alloy has increased strength, the jewelry has an intricate shape and a very complex design.

Also, the cost is greatly influenced by the demand for such jewelry; they are very fashionable.

Why is white gold more expensive than yellow gold?

Every buyer sooner or later has a question: “Which is better?” Many people love white gold because of its warm, silvery color that looks great with any outfit. Although fans of yellow gold items speak disparagingly about white, claiming that it has a cheap look, similar to silver.

The texture of white gold is more durable and produces fewer scratches. Yellow jewelry wears out faster. Diamonds look worse on them, taking away some of their yellowness and losing their transparency.

At the same time, yellow metal reacts less to environmental factors, and white metal loses its shade, gradually darkening and turning yellow.

Additives add value to jewelry - silver, platinum, palladium. If the percentage of silver content is 64%, then white gold is obtained. The addition of palladium in an amount of more than ten percent allows all jewelry made from the alloy to be considered elite, which greatly affects their cost.

So, which gold is more expensive - white or yellow? White gold consistently commands a higher price.

Which gold is more expensive - white, red or yellow?

What shade of metal should you choose? And is it worth choosing by color? After all, the cost of jewelry is not determined by it, but by the amount of gold content in the alloy. Accordingly, the higher the standard, the greater the percentage of gold.

For example, the red color of gold is very attractive, but copper occupies a much larger part here than the precious metal. The price, compared to other types of gold, is much lower. But this has absolutely no effect on popularity.

And again we come to the conclusion that white gold is the most precious due to the addition of platinum or palladium components. White gold jewelry is a sign of prestige; it signifies belonging to the highest rank.

Disadvantages of gold products

Although many people believe that all such jewelry is made of pure gold, this is not true. The metal is very soft and can be easily deformed even without the use of special tools.

This deficiency is corrected by creating alloys with more or less expensive metals.

But still, jewelry often gets scratched and wrinkled. This is corrected by polishing the surface, but at the same time some of the top layer is removed, the product becomes smaller and lighter than when purchased.

The metal becomes stronger only when the standard is lowered, but this also means that gold is included here to a minimum.

The most affordable is an alloy with nickel content, but nickel is a very dangerous metal, prohibited in many countries. And when you choose decoration, be sure to take this fact into account. Otherwise, you risk developing dermatitis and eczema.

The ideal solution is platinum, the only negative is the very high price, which is not suitable for everyone.

So what is more expensive - white or yellow gold? The final answer is this: the most fashionable and expensive, of course, is white, but the most common and affordable option is yellow. But this is all a matter of taste and your preferences - wear what you like best!

Source: https://FB.ru/article/427665/chto-doroje---beloe-ili-jeltoe-zoloto-raznitsa-otlichiya-himicheskiy-sostav-primenenie

Which gold is more expensive - white, red or yellow?

What shade of metal should you choose? And is it worth choosing by color? After all, the cost of jewelry is not determined by it, but by the amount of gold content in the alloy. Accordingly, the higher the standard, the greater the percentage of gold.

For example, the red color of gold is very attractive, but copper occupies a much larger part here than the precious metal. The price, compared to other types of gold, is much lower. But this has absolutely no effect on popularity.

And again we come to the conclusion that white gold is the most precious due to the addition of platinum or palladium components. White gold jewelry is a sign of prestige; it signifies belonging to the highest rank.

Which is better to choose gold: yellow, white or red?

Gold jewelry is always highly valued and never goes out of style. This metal can be given the most varied and bizarre shapes and combined with precious stones. An experienced jeweler can determine which gold is better - red, yellow or white - for creating a particular product.

Colors and chemical composition

The word “gold” in relation to jewelry cannot be called absolutely correct. In its pure form, precious metal is not used to make jewelry. Usually craftsmen prepare special alloys with other chemicals. The result is a variety of varieties - red, white, yellow and others. The differences between these varieties are in their qualitative composition.

The ratio of gold and impurities is usually called a ligature. In Russia, the quantitative gold content in an alloy is calculated by its fineness. 1000 is taken as the conventional standard. If the product has a hallmark of 585, the alloy contains 585 units of gold and 415 of other elements per 1000 parts. The more parts of gold in the mixture, the higher the purity.

In the West, the quality of the mixture is determined by carats. The highest standard is considered to be 24 carats. This is pure gold, which is equivalent to the Russian 1000.

The color of gold is determined by the qualitative composition of the impurities contained:

1. The yellow variety is a combination with silver and copper. Such a composition has at all times been a symbol of prosperity and reflected the material and social status of the owner. Depending on the amount of silver, yellow gold can be of several shades - from light to rich dark.
2. The qualitative composition of red gold is no different from yellow gold. The difference is that there is several times more copper in this alloy. It is copper that gives the mixture its characteristic color. In the last century, in the territory of the former USSR, only such gold was in use.
3. White gold resembles platinum in appearance. However, its cost is much lower, which made the metal popular. The white color of the mixture is due to the presence of palladium, platinum, silver or nickel. The latter element is banned in many countries because it often darkens and causes allergic skin reactions. The most noble and expensive is the alloy with a high platinum content.

By adding other chemicals to the alloy, jewelers are able to create a variety of shades - bluish, greenish, etc.

White gold

This variety owes its unusual color to the presence of palladium . Its success in the jewelry market is due not only to its lower price than platinum, but also to the fact that famous fashion houses have created unique jewelry collections from it.

Pearl or diamond inlays are perfect for this alloy. No less often, it is combined with sapphires, emeralds or rubies, which makes the cost even higher. Despite the sky-high prices, the demand for such products remains high. The purity of white gold is most often the same as that of other types - 585.

Red and pink variety

This type includes copper and zinc. The resulting material is durable and malleable, which is very valuable for jewelry processing. The jewelry looks amazing, but is a little cheaper. Most often, diamonds, garnets, and rubies are set in such gold. Products with a slight reddish tint are very durable. Thanks to its high plasticity, it is possible to make the most complex and subtle patterns from it.

In European countries, this material is not highly valued - it is considered to be of low quality. In the West, the yellow species is preferred. Just a few years ago, women in Russia did not care whether gold was more expensive, pink or yellow, since the choice was limited only to red and pink varieties.

Yellow alloy

Yellow gold contains silver and copper . It is highly valued for its warm color. The closest thing to pure native metal. However, such a mixture is more difficult to process, so products made from it do not turn out as exquisite.

There should be much more silver in the composition than copper. In this case, it will be possible to achieve a bright sunny color of the metal. In addition to the 585 sample, there is a rarer 750 and a very rare 958.

Comparative characteristics

The purity of all types of gold can be the same, that is, the content of pure gold in any alloy will be the same, only the composition of impurities differs .

Sometimes it is difficult to determine which gold is more expensive: white, yellow or red. It is a mistake to believe that yellow material has the lowest price. In fact, white alloy is considered the most expensive.

The yellow variety is highly prized for its sunny color and durability. This look is not often combined with gemstones. Usually these are diamond inlays. Such jewelry is worn only for special occasions. They are perfect for people with light and dark skin.

But red gold has a more affordable price and is much more often combined with stones. Products made from it can often be found in everyday life. The red mixture retains its original appearance and shape much better, and is strong and durable.

To decide whether white gold or yellow gold is better, you need to take into account the higher cost of the former and the softness of the latter. White alloy is considered the most prestigious and indicates the high status of the owner. As for fashion trends, it's not so much about the type of metal, but about the design of the product itself.

Selection rules

Experts advise choosing gold depending on the purpose for which it is used. Most often, the precious metal is used to make jewelry. In addition, it is becoming increasingly in demand in the microelectronics, medical, pharmaceutical and chemical industries. Principles for choosing material for jewelry:

1. For everyday wear, it is better to choose jewelry made of red alloy.
2. The yellow variety is considered more luxurious and expensive. Products made from it are purchased for special occasions. Such jewelry is not suitable for daily use, since the yellow mixture is too soft and easily deformed. Repairing such products will cost the owner significantly more.
3. Those who decide to get a gold watch inlaid with precious stones are better off opting for the red version. Such a thing will be durable, reliable and look great on your hand.
4. The yellow variety is traditionally used to make wedding rings - it has always symbolized eternal love, stability and marital fidelity.
5. For making fancy ornaments and complex jewelry, white or red metal is more suitable. They are used to make decorative flowers, leaves and buds.
6. Yellow-colored products are distinguished by laconic lines and a minimum of complex details. Even if you make a complex piece of jewelry from such metal, it will not have such an impressive appearance as red or white.

The buyer, based on his preferences, chooses which gold is better - white or yellow.

Quality assessment upon purchase

When purchasing jewelry, you need to pay attention to some points that indicate its quality. First of all, pay attention to its sample. It is important that the numbers on the tag and on the product itself match. Reputable jewelry manufacturers put their trademark or logo on them. This can be an indirect confirmation of high quality and authenticity.

Next, you should study the following indicators:

1. Information on the tag: it should contain information about the sample, weight, chemical composition, manufacturer and cost.
2. Appearance of decoration. All fastenings and soldering points must look neat and of high quality. A good product has no unevenness or visible defects.

The manufacturer is of great importance. Today, Italian-made jewelry is becoming increasingly popular. It is not worth buying products from Turkey - the composition of the ligatures in them leaves much to be desired. Very often, only the clasp with a sample is made of high-quality material, and the entire product contains a large amount of copper. With constant wear, it will quickly come to the surface.

In general, which gold is better - red, white or yellow - depends on the purpose for which the jewelry is purchased and on the financial capabilities of the buyer.

Source: https://VseoMetallah.ru/zoloto/kakoe-luchshe-vybrat

Which gold is more expensive - prices for white, yellow and rose gold

The question “what is the most expensive gold” relates to the field of investment. The highest price is given for “red” gold of 999 purity. This is the chemical element Au in its pure form with a gold content of 99.9%. During the time of Tsarist Russia, gold coins were made from this gold, called “chervonets”. 999 gold is too soft to make jewelry from.

Red gold has a bright yellow color, and the addition of impurities - alloys - changes the color of the alloy. The spectrum of gold alloys ranges in color from white and pale yellow to various shades of pink and red. In order to find out which gold is more expensive: white, red or yellow, you need to understand the composition of the alloys.

Comparison of multi-colored gold

Fineness is a value indicating the number of parts of gold in an alloy. The physical characteristics, color and cost of the metal depend on the number on the sample. Obviously, determining which gold standard is the most expensive is quite simple. The most valuable is the presence of a large amount of gold in the alloy. This means that the higher the purity value, the higher the cost of the gold alloy.

Pure 999 gold is a metal prone to deformation. To ensure that precious metal products retain their shape, alloys are created. The main components of the alloys are:

• gold as the main component, in the amount of 375, 585 or 750 parts;
• silver;
• copper;
• palladium;
• platinum;
• sometimes nickel;
• rhodium, as a coating on white gold, to give it shine and durability.

We recommend reading: What are precious metals and what is their value?

Gold of any color can be represented by alloys of 375, 585 and 750 samples. The most expensive option in each color is 750 sample. The percentage of precious metals in the alloy will help answer the question of what is more expensive - white or yellow gold. Adding platinum to white gold makes the metal more valuable than the yellow alloy containing silver and copper.

Yellow gold

The yellow gold ligature consists of 585 or 750 parts of gold. The remaining parts are filled with copper and silver. Moreover, the amount of silver should significantly prevail over copper, muting its red tint. The price of yellow gold per gram reaches 3000 rubles . When deciding which gold is better: red or yellow, you need to pay attention to the sample.

Advantages in comparison with gold alloys of pink and white shades:

• the color of natural, naturally occurring gold;
• does not lose shine;
• Pairs perfectly with certain jewel tones.

Features of Yellow Metal:

• subject to deformation;
• Scratches appear on jewelry.

Lemon yellow gold has a lower percentage of gold in its composition, so it is more durable. It costs less than metal with a sunny golden hue. Therefore, lemon gold jewelry is in great demand.

We recommend reading: Market forecast for gold, October 15

Pink gold

The pink tones of the metal tell us about the high copper content in the gold alloy. This is the gold of the Soviet period, which we saw on our grandmothers.

Soviet gold, distributed throughout the trading network to a wide range of consumers, was a metal with a red tint of varying intensities. Rose gold is more expensive than yellow gold only if the standard of the yellow metal product is lower than pink gold.

The price of rose gold per gram today ranges from 900 rubles for 375 hallmark gold to 2,100 rubles for 750 hallmark gold.

Advantages of rose gold:

• affordable price;
• resistance to mechanical deformation;
• Corrosion resistant;
• Looks great as a setting for diamonds.

Rose gold is valued by fans of the USSR heritage and modern jewelers. Global jewelry brands produce many of their collections in gold of these shades. The auction price of jewelry from Tiffany, Cartier, Van Cleef & Arpels and Graff and others is incommensurate with the price of the metal. Designer products are sold at prices that are tens or hundreds of times higher than the cost of gold material.

Which gold is better: red, white or yellow?

1056
Reading time: 2 min.

Do you like gold? Which one is bigger: red, white, yellow or something else? And do you know for sure that the type you have chosen is the best? Or haven’t you even thought about whether there is a difference in a precious metal of different shades? Let's figure it out together.

"People are thirsty for gold"

Gold is a metal that, if not loved, is respected by many. Of course, because such decoration speaks of the status of its owner .

It's no secret that it comes in several types. It is considered a real misconception to divide this noble metal into Russian, Turkish and Italian. In fact, it is divided into white, yellow, red and pink .

Ligature elements add shade and strength to the decorations. This is an alloy of several components, which is added to give the metal special properties .

• White - the most expensive type , coated with palladium .
• Rose and red gold are plated with copper in different proportions.
• Yellow precious metal is most in demand today.

Reference! Products of 585 and 750 purity are especially popular; the bank uses 999 purity bars.

Jewelry: pure gold or alloy?

Of course, it is foolish to believe that jewelry is made from the purest mineral.

Reference! Each product made of precious metal has a test mark, which indicates the amount of the metal itself in relation to the portion of the alloy in 1000 grams.

Accordingly, the higher the standard, the more gold is in the product . Let's look at the most basic tests.

• 375 - low quality connection . It contains more impurities than gold itself . Such products soon lose their original appearance.
• 500 is a low-cast alloy from which jewelry is not made .
• 585 - most in demand among jewelers. This alloy, regardless of the composition of the alloy, is ideal for the production of all types of jewelry .
• 750 is an expensive type that is not only famous for its appearance, but is also durable . This alloy is mainly offered in yellow and white versions .

Red

The presented species is a product of a compound with copper and zinc . This gives the metal greater strength and durability.

Reference! Diamonds, garnets, rubies are mainly set with red gold.

But such a metal is considered to be of lower quality than its other varieties . And if Europe does not recognize it at all , then quite recently people from the post-Soviet space had the opportunity to purchase only this type of precious metal.

White

White metal products owe their noble color to palladium impurities . Similar in color to platinum, this alloy has one advantage - a much lower cost.

This popularity is also due to the fact that famous fashion houses have created collections of white gold jewelry.

Reference! Inlays made of pearls or diamonds look great against the backdrop of white, noble and luxurious shade. Sapphires, emeralds, and rubies are not inferior in this regard.

Yes, such products cost a lot of money, but at the same time they are incredibly popular .

Yellow

The mineral owes this warm hue to the admixture of copper and silver . By the way, this color is closest to the pure look .

But products made from such metal do not turn out to be very sophisticated. This is due to the fact that the yellow alloy is the most difficult to process .

Reference! Products made of yellow gold can be found not only in 585, but also in 750 and even 958.

When you choose jewelry for yourself or purchase it as a gift, you should understand the purpose of the jewelry.

• If decoration is necessary for special occasions or rare events , then it can be a white or yellow variety . They are impractical if worn frequently; the metal is easily damaged due to its softness.
• When choosing between yellow and white shades of gold, you should be guided not only by your financial capabilities, but also by taste characteristics. That is, cold white gold is most suitable for Scandinavian people with white skin, light brown hair and light eyes .
• As for the red analogue, it is several times stronger . It is purchased not because of its appearance (to be frank, this is not its strongest side), but precisely because of its high strength. Recently, jewelry made from this type of metal has lost its popularity . But cutlery, accessories, and furniture fittings look great and do not require repair or polishing for a long time.

We hope you manage to find “your” color of gold for yourself.

Subscribe to our Social networks

Did you like it?

( +6 points, 6 ratings)

Found a mistake? Select it and press Ctrl + Enter. We'll fix everything!

Source: https://tkaner.com/aksessuary/kakoe-zoloto-luchshe/

White or yellow gold - which is better and what is the difference, advantages and disadvantages, prices and reviews

Hello! Choosing jewelry is always a pleasant and exciting process. However, the variety of jewelry often makes you feel confused. And the first stumbling block may be the color of the alloy. White or yellow gold - which is better? Let's try to figure this out together.

What is white and yellow gold

White and yellow are Au-based alloys and master alloys. The combination of silver and copper guarantees that the product will receive a yellow color. To change the shade of the alloy to a lighter one, jewelry manufacturers use nickel and zinc.

What is the difference

The differences between the alloys are not only in color schemes. The strength characteristics of the two metals are also different.

Composition and strength

The ligature of precious metals of different colors has its own differences.

For white gold, the following elements are used as additives:

• platinum;
• silver;
• palladium;
• zinc;
• nickel.

And although the last two metals are non-precious, their presence enhances the cold shine of jewelry.

For classic yellow gold, the alloy is smaller in the number of elements it contains. The main metals are silver and copper. Occasionally, other additives may be added to achieve a specific shade.

Precious metals 585 and 750 samples of both colors have similar strength and wear resistance parameters. However, high grades of yellow gold are more ductile and at the same time more susceptible to deformation.

Appearance and features of the brand

Jewelry made from white precious metal differs little in the nature of the shade. Only the level of gloss can vary when nickel and zinc are added to the composition.

If we talk about yellow jewelry, the range of colors is much wider and depends on the proportions of the elements included in the ligature. On sale you can find bright lemon decorations and those with a slight red tint.

When marking jewelry, its color does not matter. The amount of Au in the composition plays a role. As a result, two rings with different ligatures and 75% gold content will have the same hallmark and hallmark.

Difference between different purity grades

The percentage composition of pure Au in a precious alloy determines its fineness. However, within one sample there may be several variants of compositions regulated by GOST.

You can see them in the table below.

Alloy color	Try	Mass fraction of component, %
Gold (Au)	Silver (Ag)	Platinum (Pt)	Palladium (Pd)	Nickel (Ni)	Copper (Cu)	Zinc (Zn)	Cadmium (Cd)
Yellow	375	37,5	1,7	–	–	–	Ost.	–	–
37,5	9,5	–	3,5	–	Ost.	–	–
585	58,5	19,5	–	–	–	Ost.	–	–
58,5	29,5	–	–	–	Ost.	–	–
58,5	7,5	–	–	7,7	Ost.	2,2	–
750	75,0	12,0	–	–	–	Ost.	–	–
75,0	14,5	–	–	–	Ost.	–	–
75,0	7,5	8,5	–	–	Ost.	–	–
958 999	95,8	1,7	–	–	–	Ost.	–	–
99,9	–	–	–	–	–	–	–
White color	585	58,5	25,0	–	Ost.	–	–	–	–
58,5	28,2	–	9,5	–	–	Ost.	–
58,5	27,5	–	9,5	–	–	–	Ost.
58,5	–	–	–	12,0	Ost.	3,6	–
750	75,0	14,5	–	–	7,0	–	Ost.	–
75,0	14,5	–	Ost.	–	–	–	–
75,0	8,5	–	13,5	Ost	–	–	–
75,0	6,5	–	13,5	Ost.	–	–	–
75,0	8,5	–	8,0	3,5	–	–	Ost.
75,0	–	–	–	7,0	Ost.	2,1	–

Differences in GOST standards and quality

The composition and proportions of the master alloy of both alloys are regulated by GOST 30649-99 “Alloys based on precious metals for jewelry.”

It states:

• approved grades and samples of gold;
• its composition;
• alloy color.

Price and demand

The cost of yellow and white gold products varies depending on the content of the ligature and the purity. With the same amount of Au in the alloy, the price of jewelry will be the same. Exceptions include products containing platinum. Precious metal makes a product more expensive.

Every year the demand for white gold products increases. The light shade of metal looks noble and expensive. However, yellow gold still reigns supreme.

Jewelry made from it is suitable for daily wear, while white precious metal is suitable for special occasions and holidays.

What stones are suitable

White gold pairs best with the following gemstones:

• diamonds;
• sapphires;
• amethysts;
• aquamarines;
• Labradors.

Yellow gold is combined with jewelry stones, regardless of the number of carats, and looks harmonious with different shapes and color variations.

Advantages and disadvantages of white and yellow gold

The main advantage of both alloys is their attractive appearance. Plasticity allows you to create unusual jewelry. However, both white and yellow gold also have disadvantages.

White gold:

• if it contains nickel, it may cause an allergic reaction;
• if the white color is achieved by rhodium plating, the coating must be periodically renewed;
• When platinum is added to the ligature, the cost of the decoration increases.

Yellow gold has one significant drawback: high-grade jewelry is fragile and easily deformed under external loads

What color decoration is better to choose?

The choice of jewelry color depends on the buyer's preferences. If during fitting there is a feeling of harmony with the chosen jewelry and metal, then this is exactly what you need.

When choosing jewelry for a special occasion, you should make sure that the color of the item matches the shade of the chosen outfit. Much depends on the shape and design of the decoration.

Gold must be matched to your skin color. For example, dark-skinned people rarely wear white jewelry.

Recommendations for care, cleaning and storage

1. Regularly clean jewelry made of expensive metal from plaque and dirt with special pastes.
2. Do not store jewelry in wooden or cardboard boxes.
3. Avoid contact of gold and household chemicals.
4. Remove products before water procedures.

Customer Reviews

Anastasia:

“I don’t wear yellow gold as a matter of principle. It’s better to buy one normal white ring than to look like a gypsy.”

Veronica:

“Among the decorations there are both colors. I wear it depending on my mood or a specific outfit. I clean everything periodically and everything is fine.”

Julia:

“I like the color of white gold, but I can’t wear it because of the nickel content in it. But I haven’t found any options without it yet.”

Conclusion

The comparison of white and yellow precious metals by their opponents and supporters has been going on for a long time. However, the final choice always depends on the wishes of a particular person.

Cost also plays an important role when purchasing.

If the choice of metal for jewelry is still relevant and you want to know other variations of shades, subscribe to our accounts on social networks. We have a lot of interesting things.

Source: https://zhazhdazolota.ru/vidy/beloe-ili-zheltoe

What is the most expensive gold?

Eleanor Brik What is the most expensive gold in the world? And why can’t it be found in jewelry? You will find the answer to these questions in our article and learn many interesting facts about the most noble metal.

What is the most expensive sample?

The most expensive is gold of the highest standard, in which the content of precious metal is the highest.

Products of 999 standard have the maximum concentration, which contains 99.9% pure metal and only 0.1% impurities.

It is also estimated at 24 carats. But it is almost impossible to find it in jewelry. In its pure form, it is a very fragile material, it is difficult to process, and the products are impractical and short-lived. Despite its high value, it has a duller, unsaturated color.

Based on the sample, you can determine the percentage and find out which gold is the most expensive:

• Products of 985 standard contain 1.5% impurities. Due to its softness, metal is practically not used to create jewelry.
• The 750th sample contains 25% impurities. It has moderate strength and is easy to process.
• In 585 – 58.5%. This is the most popular composition, which has ideal strength and maximum shine and rich color. It does not fade and is widely used in jewelry.
• In 500 – 50%. It loses color after two years.
• In 375 – 37.5%. Durable and strong, but rarely used in jewelry, as it loses color almost immediately.

Where is pure gold found?

In rare cases, only pure metal inserts are used in jewelry, which jewelers have to frame with other, more durable ones, so as not to be subject to deformation.

Gold of the highest standard is used for jewelry in Arab countries and the Far East. Also, the purest products are produced in Japan, but in exclusive samples. The owners of such masterpieces sometimes put on the “treasures” only once in their entire lives, during the most solemn ceremonies, after which they are passed on by inheritance or melted down.

What is the difference between white, yellow and red gold?

In addition to color, composition also matters:

• Yellow is a traditional option that is widely used in jewelry. The composition also includes copper and silver.
• Red is obtained by adding copper and zinc. A significant amount of copper in the composition gives a rich red color. When palladium is added, the alloy acquires a brown tint.
• The white tone is provided by the presence of nickel, platinum, silver and palladium. A high concentration of silver gives a matte finish.

Is gold harmful or beneficial?

It is generally accepted that it has a beneficial effect on the human body, tones and adds strength, has a positive effect on the nervous and cardiac system, and lowers blood pressure.

But we must not forget that white gold can cause allergies, as it contains nickel. And according to statistics, every 8th person on the planet is allergic to nickel.

Since 2000, the European Union has allowed the production of white gold only with the addition of palladium.

Blue, green and gray gold - truth or myth?

In fact, in the jewelry industry, there are blue, green, gray and even black gold. Of course, it is not the most expensive gold in the world.

• To obtain a blue tint, 1/3 of steel is used
• For green - cadmium, copper and silver
• For gray - black steel in large quantities.

They are not used to make jewelry, but are used only as inserts due to their low strength and fragility.

November 20, 2014, 15:47

Source: https://sunmag.me/sovety/20-11-2014-kakoe-zoloto-samoe-dorogoe.html

Features and cost of white and yellow gold

Pure jewelry gold is called pure gold. But in fact, it is almost never used for jewelry, since it is not very suitable for them. This gold is too soft and not much force is applied to deform it.

Therefore, in order to increase the strength of products and give them a beautiful appearance, gold is mixed with other metals. They are called ligatures; copper, silver, nickel, palladium, platinum and others are added to create jewelry. Depending on their ratios, gold can acquire a variety of colors.

White and yellow gold rings

How are yellow and white gold obtained?

Yellow gold is obtained by adding silver and copper. It is more familiar to the eye and is associated by many with wealth and luxury. With white gold, not everything is so simple; it can be obtained by adding palladium, platinum or nickel. Depending on the ligature, not only the shade of white gold may differ, but also its properties and price.

Nowadays, nickel is used much less frequently to make white gold. Moreover, in some countries, for example in the EU, the use of nickel in the production of jewelry is prohibited. This is due to allergic reactions to this metal. Every eighth person is allergic to such jewelry. Therefore, when you purchase products imported from other countries, be careful. Pay attention to the legislation of the manufacturing country to determine whether the use of nickel is allowed there.

Instead of nickel, palladium is now used, which is more expensive. White gold with the addition of palladium is not inferior in beauty to products using nickel. However, palladium is inferior in strength to nickel, so complex products with corners and bends may lose their appearance over time. To avoid this, rhodium is used.

Rhodium is applied to the surface of the product by galvanization. In this case, white gold is coated with it using electrolysis. This process can also make the product containing nickel safe. However, the rhodium layer can wear off over time, so it needs to be renewed.

Platinum is also added to gold to give it a white color, and such gold is the most expensive. Products containing platinum are durable and look good. This gold is used in combination with pearls or diamonds, and products made from it are elite.

What is the difference between white and yellow gold?

Buyers often wonder which gold is better? Many people choose white gold for its silvery color, which allows it to look flattering with any outfit. Fans of yellow gold, in turn, argue that it looks cheap because it looks like silver. White gold is less prone to scratches. Yellow gold does not go well with diamond jewelry because it gives off a yellowish tint.

Yellow gold retains its color and properties longer, with the exception of white gold products with the addition of platinum and silver, but such products are much more expensive. Over time, it does not age and does not require re-coating.

Three colors of gold

Designers do not recommend wearing yellow gold jewelry to people with pale skin. But those with warm tones are recommended to wear it. Both types of products require cleaning and maintenance.

The main differences between these two types are:

• they have different alloys;
• white gold requires less maintenance;
• gold may be more expensive if it does not contain nickel;
• white gold goes better with diamonds;
• yellow gold looks elegant and more classic.

What determines the price of jewelry?

In addition to various additives, the price of the finished product will depend on several other factors. First of all, this is a sample of gold. In our country, the following samples have been established: 385, 333, 500, 585, 750 and 958.

The most expensive gold is 958 samples. The most popular of them is 585 gold. The latter indicates how many thousandths of pure gold are in the alloy. The price of the metal is proportional to the amount of gold.

The cost will also depend on the complexity of the work and the presence of stones in the decoration. If, for example, it is a ring with diamonds, then the cost of the stone will be much higher than the cost of gold.

We recommend other articles

Source: https://DedPodaril.com/zoloto/tipy/kakoe-zoloto-dorozhe-beloe-ili-zheltoe.html

Differences between white and yellow gold

Both white and yellow gold are used in jewelry. Which one is better?

What is the difference between the karats of white and yellow gold?

The most common question people ask is how comparable are the karats of white gold to the karats of yellow gold? The answer is that they are completely the same.

White gold is simply an alloy of yellow that includes other metals.

The only difference between them is the use of additional metals that are part of the alloy.

Additional metals used are palladium, manganese and zinc.

The resulting alloy may have a yellowish tint, the intensity of which will depend on how much white metal is added; after all, a significant portion of the material is yellow gold.

To remove this yellowish tint, many jewelers plate their jewelry with rhodium. The resulting jewelry is more like platinum, only much more affordable.

White gold alloy has more zinc, while yellow gold alloy has more nickel. Regardless of the presence of various metals, the purity of the alloy remains unchanged.

For example, if a gold ring is labeled 18 carat, it means that it is made up of 24 parts, of which 18 parts are pure gold and the rest are other substances. The difference between a white and yellow 18-karat gold ring is only the presence of various additives.

How is white gold different from yellow gold? White gold is mixed with zinc, which gives the alloy a lighter color. With zinc, the alloy still has a yellowish tint. The addition of rhodium makes the color of the white gold alloy truly white.

Metallization with rhodium

Most white gold jewelry offered today is rhodium plated. If the jewelry is completely white without a hint of yellow, you are most likely looking at rhodium plating.

Rhodium is a white metal that is used as a plating in jewelry. In addition to the light color that the alloy acquires, it also gives it rigidity and reliability.

Gold is a soft metal, so a layer of rhodium brings additional protection. Since rhodium is an expensive metal, white gold jewelry is more expensive than yellow gold jewelry.

Disadvantages of white gold

At the same time, yellow gold jewelry looks new for a longer time.

This is due to the fact that over time the rhodium layer wears off and in the place where this layer has completely disappeared, the lower yellowish layer of the alloy becomes visible.

How long it will take for this to happen depends on how often and intensively you wear such jewelry.

However, if this does happen, then it is enough to take the jewelry to the jewelers, and they will again apply a layer of rhodium to the surface and restore the appearance of the product. Of course, these will be additional expenses.

How to prevent white gold from losing color?

Rhodium is good for imparting white color, but this coating does not last forever. Jewelry is exposed to friction and other impacts every day, causing it to wear out.

Eventually the rhodium will wear off and the yellowish underneath layer will become visible. You can slow down this process by wearing your jewelry less often, but sooner or later the white gold piece will yellow.

The best way to preserve the color of your jewelry, other than not wearing it, is to replate it.

Remetallization is a procedure by which a jeweler adds a new layer of rhodium to your jewelry. The price you pay for this service will depend on how worn the original rhodium plating is and how thick the new layer is.

In addition to appearance, there is another reason to replate white gold jewelry once the plating wears off - the alloy composition.

If the underlying gold alloy contains nickel and you are allergic to this metal, then any contact of your skin with the alloy may cause an allergic reaction.

Don't polish your jewelry too often

If your jewelry has a lot of scratches, you can get rid of them by polishing.

However, keep in mind that this process actually removes a tiny layer of material from the surface of the jewelry.

If your white gold jewelry is polished too often, all or part of its rhodium plating will also be removed and you will have to pay again to have the jewelry replated.

As a rule, jewelry should be polished by a professional and no more than a few times a year.

Is yellow gold better?

Yellow gold has its disadvantages, which are associated with its softness. It is a fairly soft metal and the higher the carat, the easier it is to scratch.

The scratched surface can, of course, then be polished. But polishing will remove the gold layer from your jewelry and make it thinner.

A lower carat value of a piece of jewelry indicates its greater reliability, because... there is little pure gold metal and many other additives. However, if you are allergic to nickel, then it is better not to buy gold jewelry with less than 14 carats.

What's better to buy?

Both have their advantages and disadvantages.

Before making the final decision to purchase jewelry, you need to pay attention to the presence of stones in it.

If the diamond has a low color scale (K or L), then it is best to have such a stone in a yellow gold setting.

This will hide the yellowish tint of the diamond.

And when a diamond is classified as colorless and almost completely transparent, then a white gold setting is perfect for it, which will complement the sparkle of the stone.

For those who want something more durable than white gold, platinum is the way to go.

Platinum is much more expensive, however, it does not scratch as easily and can be polished without applying an additional layer of rhodium afterwards.

Source: http://DragMag.ru/otlichija-mezhdu-belym-i-zheltym-zolotom/

Which jewelry is better: white or yellow gold?

Gold comes in different colors

At all times, gold jewelry has been very popular. Currently, jewelry does not lose its value and is in great demand. Famous designers annually determine fashion trends for certain shades of gold. Although this metal comes in a variety of shades, white, yellow and red gold remain the most popular.

What is the difference between different shades of metal? Which gold is better, white or yellow? To answer this question, you need to know that all types of gold are alloys to which other metals are added. Depending on the alloy components and their percentage, you can get a wide variety of colors and shades.

Return

What is the difference between white and yellow shades?

Jewelry gold in its pure form is called red gold. It is quite soft and quickly deforms, so it is practically not used to create jewelry.

 To increase the strength of products, give them shine and a beautiful color, gold is mixed with other metals (ligature). If you add, for example, silver and copper to pure gold, you get a yellow tint.

The color saturation depends on the amount of copper. Also, by adding a certain amount of copper to the alloy, you can get red gold.

It is not uncommon for yellow gold jewelry to be painted white using rhodium. The procedure of applying a thin layer of rhodium to a product is called rhodium plating. After the procedure, the strength, rigidity and shine of the product increases.

Gold jewelry can also be white. This is made possible by adding palladium, platinum or nickel to the alloy. Such decorations are distinguished by their special gloss and brightness. White gold, which contains platinum, is considered the most noble. When palladium is added, the product acquires a yellowish tint. Nickel is used extremely rarely because it can cause allergic reactions.

White color is commonly used to create black pearl and diamond designs. To give jewelry a white shine, a thin layer of rhodium is also applied.

Despite all the differences, the cost of jewelry in yellow and white shades is the same. The price in this case depends only on the sample (quantitative proportion of gold, palladium, platinum or silver in the alloy). If a piece is marked as 585 purity, it means it is 58.5% gold. If a product shows 750 purity, it means it contains 75% gold. Consequently, the more precious metal contained in the alloy, the higher the purity and the higher the cost.

Return

Which products are better?

The cost of jewelry does not depend on what gold it is made of, but is determined by its fineness, that is, by the amount of gold contained in the alloy. All you have to do is choose which shade of precious metal suits you best and matches your style.

It is known that rose gold always looks very beautiful. During the Soviet era, lovers of jewelry almost always wore jewelry of this color. The trend continued for several decades.

However, you should know that this type of copper product contains much more copper than precious metal. Therefore, rose gold has a relatively low cost. This explains its popularity.

After all, the cost of jewelry in this case is less expensive.

It is worth noting that in Europe, rose and yellow gold have always been considered low-grade. Many experts argue that it practically does not match with most gemstones. Despite this, at present, some designers are still introducing fashion to it.

There is no doubt that the most expensive metal is white gold. Platinum or palladium is added to its composition. Such precious jewelry is considered a certain sign of prestige, indicating that the owner of the item belongs to the upper class of society. It is worth noting that white gold with the addition of silver and palladium is the best and therefore costs more.

If we talk about fashion, then today white and yellow gold are equally fashionable. It is not the color that plays a significant role, but the design. Sellers of jewelry boutiques notice that buyers most often pay close attention not to the color of the metal or weight, but to the design.

All shades look great. At the same time, yellow gold looks very colorful and bright, while white gold, on the contrary, is calm and cold. It is quite difficult to give a specific answer to the question of which is better, yellow, white or red gold. In this case, it all depends on the person’s personal preferences and taste.

Return

How to buy a quality product?

Sample - a sign of quality

What should you pay attention to when buying precious jewelry? First of all, you should look at the sample indicated on the product and compare it with the sample on the tag. The decoration must also bear the distinctive or trademark (stamp) of the manufacturer. This is a guarantee of authenticity and quality.

Then you should check the tag. It provides detailed information about the manufacturer, sample, weight, composition, name and cost.

The fact that the jewelry is real is indicated by its appearance (this applies not only to jewelry, but to absolutely all products). Before purchasing, you need to carefully consider the chosen model of ring, chain or earrings to make sure that all fastenings and soldered places are made of high quality. This guarantees durability and long service life. Remember, high-quality jewelry should not have visible defects or irregularities.

Which manufacturer is better to choose? Today, precious jewelry of high standard and quality made in Italy and Hong Kong is becoming extremely popular. Turkish products, on the contrary, are losing demand among buyers due to the low quality of alloy compositions.

Source: https://grammzolota.ru/vidy/luchshe-beloe-zheltoe-dorozhe-krasnoe-rozovoe.html

Which gold is better

The question of which gold is best to buy will never lose its relevance. After all, the number of lovers of this noble metal is growing every day. In addition, there are also more and more types of this precious metal, and products made from it are becoming more sophisticated and varied.

To choose the right aurum jewelry, you should follow some simple principles that will allow you to choose not just a beautiful product, but a quality product that will last you for many years.

Step #1. Selecting a sample

According to government decree, any product containing 30 percent or more pure gold must have a hallmark - a hallmark, which is determined by the weight content of aurum in the alloy. The strength of the purchase, its durability, resistance to external negative influences and, of course, the price will depend on it.

In Russia, 585 and 750 samples are most often used for making jewelry. The first option is the most common for the production of “everyday jewelry”. This one contains up to 59% gold, is characterized by increased hardness, wear resistance and has excellent external characteristics. In addition, the metal does not lose its original shine and splendor for a long time, is resistant to damage, does not bend or break.

The second option contains up to 75.5% pure gold, which is why it has a rich yellow color and magnificent shine. However, the more precious metal the jewelry contains and the less ligature, the softer and more fragile it becomes.

Such products quickly wear out from constant wear, become deformed, and scratches quickly appear on their surface.

Therefore, such gold is better suited for creating rings, chains, earrings, and body icons for important events in life and special occasions.

Step #2. Deciding on the shade

The second thing you should pay attention to after testing is the shade of the product made of precious metal. Pure jewelry gold is called red gold and has a rich yellow color. However, it is quite soft, which is why it is mixed with ligature - other metals that increase the strength of jewelry, giving them a beautiful shade and shine. The color of the product is determined by what metal and in what quantity is used as an alloying additive:

• Yellow indicates a high standard of gold - this is the natural color of the metal. However, high-carat jewelry is not durable and is quite expensive.
• A pink or red tint is obtained when copper acts as a ligature. The greater the proportion of copper in the composition, the richer the red color of the finished product. Such an alloy is considered low-grade. However, jewelry made from it is very durable, able to withstand loads and retain any shape.
• Today, white jewelry is especially popular, replacing very expensive platinum and silver, which is quickly losing its appearance. This color is achieved by adding platinum, palladium, rhodium or nickel. The most noble ligature is platinum - it makes jewelry more durable and also gives it a refined appearance. Palladium imparts a subtle yellowish tint. When rhodium plating, a thin layer of rhodium is applied to the product, which makes the color white. Nickel is not used as often as it is not suitable for everyone and can cause allergic reactions.
• Fans of non-standard colors can choose set rings, bracelets, earrings or brooches with a pronounced greenish tint. This color is achieved when silver is used as a ligature.

The cost of various jewelry does not depend on the shade of gold. The price is determined by the breakdown, that is, by the weight content of the precious metal in the alloy. Which color is more sophisticated and looks more sophisticated is up to you to decide. The choice depends on your taste preferences.

Step #3. We check the quality

Really high-quality precious metal products are hallmarked. In our country, this is a print of a girl in a kokoshnik looking to the right. Then you should study the tag, which contains information about the manufacturer, weight and sample of the product, name of the product and its cost. Pay attention to whether the sample indicated on the jewelry matches the one on the tag - this information must match.

The fact that the jewelry is genuine is indicated by its appearance. Please review the product carefully before purchasing. Gold should not be dull, it must shine and shimmer beautifully in the light. The structure of the metal must be uniform and free from defects, irregularities and scratches. Places of soldering and fastening must be done carefully and efficiently.

Consultants who work in large jewelry stores are always ready to help you decide which gold is best to buy. They will also help you choose a product or set of jewelry that suits your taste.

Residents of St. Petersburg can order exquisite gold jewelry in our Petrogold jewelry workshop. We make wedding rings, gold chains, gold crosses, which will allow you to become the owner of a truly unique item.

Source: https://www.petrogold.ru/blog/kakoe-zoloto-luchshe