How to clean silver at home to make it shine

How to clean silverware at home: we clean silver spoons, forks and dishes with our own hands

Silver accessories tend to darken. It’s especially unpleasant when you’re planning a celebration and don’t have time to clean the equipment. It is clear that spoons and forks themselves do not turn black; there must be a good reason for the loss of their original shine. It is advisable to understand this issue before cleaning your silverware from blackness again. After all, by finding out what the problem is, you can prevent its undesirable consequences in the future.

Most often, a change in the color of a precious metal occurs due to its oxidation upon contact with other substances contained in products, household chemicals, rubber and gas. But also reasons could be:

• too much humidity;
• contact with wet skin;
• improper storage;
• poor product quality.

Advice. Silver will stop causing trouble if you follow simple rules for its use and storage.

Silver cleaning cloth as a gift

Get

How to care for silver so that it does not darken?

You won’t have to think from time to time about how to clean a silver spoon and how, if you treat your things with care, take care of them in a timely manner, thereby preventing their damage and contamination.

Silver is a soft material that can be scratched if not handled correctly. To prevent this from happening, you should remember and follow the recommendations for caring for silver items:

• The use of hard brushes, sponges and metal scourers is not allowed.
• Storing and cleaning silver items is done away from other kitchen utensils made of metal.
• Clean large utensils, such as a jug, using a special detergent spray.
• For silver forks, spoons, saucers, use paste-like cleaners.
• Do not use a dishwasher.
• Products with blackening and enamel inserts should be cleaned with care. Try to do this carefully, avoiding decorative elements.

Important! The above recommendations do not apply to knives made of silver (except for fish), the blades of which are made of stainless steel.

How to store silverware?

• Keep items in a dry place, away from salt, which accelerates oxidation processes and causes tarnishing of the metal.
• Avoid exposure to sunlight.
• Make sure that the devices do not come into contact with other metal objects.
• Oxygen causes silver to change color, so its effect should be minimal.
• Store accessories in boxes with compartments provided for each device.

Advice.

An excellent solution would be to purchase a set of silverware with a storage container.

How to use carefully?

You may be surprised, but there are cases when using utensils made of silver is highly discouraged:

• If the food is cold or hot. For example, you should not make jelly or put ice cream in silver bowls. The same restriction applies to hot soups and snacks. Ignoring this advice may result in stubborn dark stains appearing on your dishes.
• Serving caviar in silver salad bowls due to oxidative processes that provoke the appearance of black spots.

How to clean silverware?

There are many options for removing dark stains and ways to add original shine to your favorite items. Below are various methods on how to clean silverware using home remedies:

Foil

This is an excellent option for caring for your serving utensils. Let's look at how to clean silver spoons at home. To do this you need to prepare

• aluminum foil;
• water – 1 glass;
• soda – 1 tbsp. l.;
• salt – 1 tbsp. l.;
• vinegar – 1/2 cup;
• textile;
• a device for removing products from boiling water.

The following actions are required:

1. Fill a bowl with foil with water and boil.
2. Add salt, soda and slowly pour in vinegar. You can do without it, but acid will significantly speed up the cleaning process.
3. Place the products into the resulting solution. Spoons must be in contact with foil, the effect of which is to rid the utensils of dullness and impart a silver shine.
4. Boil the dishes for a minute.
5. Remove the spoons from the pan. To avoid getting burned and to carefully remove valuable items, use special tongs.
6. Polish your cutlery with a soft cloth or cloth.

Soda

The most affordable way to restore shine is soda, which any housewife always has on hand.

If you need to treat simple products, you just need to combine the powder with water to form a thick paste, and apply the resulting mixture to the dirt. After 10 minutes, carefully remove everything and wipe the item with a cloth.

Some dishes require special care. Let's consider how to clean silverware in a more gentle way? To do this, we will make a soda solution. Stages of work:

1. Boil a glass of water.
2. Pour 20 grams there. soda, stir.
3. Place pieces of foil at the bottom of the container.
4. Immerse the devices in the solution for 15 minutes.
5. Carefully remove the spoons and dry with a cloth.

Vinegar

A brilliant effect can be achieved by preparing a solution of half a glass of vinegar and two tablespoons of soda. To clean silver forks and spoons, soak them in this mixture, rinse after two to three hours, and dry thoroughly.

Starch

Your dishes will shine like new if you make corn paste. What to do?

1. Mix starch with water.
2. Apply a layer of the mixture to the desired area using a damp cloth.
3. Leave until completely dry.
4. Wipe with gauze or a rough towel.

Washing powder

An excellent universal remedy for all occasions. You will need:

• pot;
• aluminium foil;
• washing powder.

Sequence of work:

1. Place pieces of foil on the bottom of the container and pour boiling water over it.
2. Add detergent.
3. Soak the products in this mixture for one minute.
4. Rinse the dishes.
5. Air dry.

Toothpaste

You can clean silverware from blackness using a regular hygiene product. With such gentle cleaning you won't be able to damage anything. To get a positive result you need:

1. Squeeze a little paste onto a soft cloth or toothbrush.
2. Apply a layer of product to the wet product
3. After dealing with contamination, rinse thoroughly.
4. Wipe silver items dry.

Chalk

You can restore the original appearance of tableware by using the following method:

1. Take two pieces of chalk.
2. Grind it into powder.
3. Add water and move around.
4. Gently apply the resulting slurry onto the dishes.
5. Clean the spoon well and wash with warm water.

Advice. To maintain the shine of your silver, place a couple of pieces of chalk near your cutlery. It absorbs moisture well, preventing darkening.

Window cleaning liquid

A glass cleaning solution will help remove stains on spoons. Apply a little product to the sponge and wipe the problem areas. To add shine, leave the devices in the composition for a few minutes. Rinse well and dry.

Lemon juice

Silver spoons will sparkle clean with an acid-based cleaning balm. Algorithm of actions:

1. Mix a spoonful of lemon juice and half a cup of powdered milk in a glass of water.
2. Line the bottom of the pan with foil.
3. Place spoons in the container and fill with the prepared product.
4. Soak the appliances overnight and rinse with water in the morning.
5. Wipe with a clean cloth and enjoy the shine.

Important! When using acids and products that have a strong odor, you must wear household gloves and a well-ventilated area.

Hand sanitizer

Hand sanitizer liquid will clean your dishes easily and without fuss. Wipe the spoons with a cloth soaked in the concentrate and the shine will return.

Eraser

An ordinary washing rubber band, which only needs to be walked over the surface, demonstrates good cleaning properties. The effect will be noticeable when you thoroughly rinse and dry your silver items.

Pomade

In this case, we mean the most ordinary cosmetic lipstick; gloss will not help here. This option is especially good if the purchased “lip” does not suit you in color, its shelf life has expired, and it’s a shame to throw it away. If the lipstick is old, you should increase the application time to 10 minutes.

So, spread the silver (preferably without relief, otherwise there will be problems with cleaning later), wipe it off after five minutes.

Potato

Potato broth will help remove stains from precious metal. Procedure:

1. Wash the potatoes, boil the vegetables until tender. You can use peelings or grate the tubers, since the ultimate goal is to obtain a rich starch broth.
2. Dip knives, forks and spoons into the prepared and cooled liquid.
3. Leave the devices in the solution for 2 hours.
4. Wash and dry.

Important! This method should be abandoned if the silver is blackened.

Silver cleaning cloth as a gift

Source: https://Kubachi.su/story/kak-pochistit-stolovoe-serebro

How to clean silver jewelry: chain, ring, cross, bracelet at home

Owners of silver jewelry often experience that their items become tarnished and blackened. In this article we will look at the 5 best products for cleaning silver at home, but first we will understand the reasons for the darkening.

Silver darkens for several reasons:

• Interaction with air, which contains chemical compounds that react with silver. Most often these are compounds of nitrogen and sulfur.
• Excessive humidity.
• Contact with human skin and sweat, and in different people the process of metal oxidation can occur at different rates.
• Interaction with household chemicals, cosmetics and some food products.
• Low silver content in the alloy from which the jewelry is made. The less, the faster the product turns black.

How to clean a silver chain at home?

A blackened chain can be cleaned either in special workshops or on your own. There are specialized products that allow you to clean blackness from metal, but when purchasing you need to be careful, since cleaning products for gold are completely unsuitable for silver and vice versa.

In order to save money, since silver turns black quite often, you can resort to proven folk remedies that can be found in any kitchen. Read how to clean stainless steel and cupronickel products here.

How to clean silver at home from blackness quickly so that it shines

Many people have silver jewelry that they wear every day. With prolonged use, their surface darkens and becomes covered with dirty spots. It is recommended to figure out how to quickly clean silver in order to get rid of blackening that has appeared.

Why does silver darken?

Before cleaning, you need to become familiar with the main reasons that lead to darkening of silver jewelry.

There are several factors that cause a dark coating to appear on the surface:

• Increased humidity levels. If a piece of jewelry stays in a room with high humidity for a long time, its color gradually darkens and the surface becomes stained.
• Contact with cosmetics in the manufacture of which sulfur is added. When this component interacts with silver, compounds are formed that cause the silver coating to turn black.
• Sweating. When silver comes into contact with sweat, the oxidation process begins, and the color of the product becomes less bright.

Cleaning methods

It's no secret that you can bleach jewelry at home. However, before doing this, you need to familiarize yourself with the most effective methods for cleaning silver.

Toothpaste and powder

Some people don’t know how to get rid of blackness on silver jewelry. Often, tooth powder or paste is used for this, which quickly eliminates darkening.

To restore the natural color of metal jewelry, you need to cover it with toothpaste or powder and rinse with warm water. In this case, it is better to use regular toothpastes without whitening properties.

Citric and other acids

To make everything shine, silver jewelry is treated with citric or malic acid. To prepare the liquid, pour 1-2 liters of water into a pan and add 100 grams of acid. The mixture is stirred and heated on a gas stove for 10-15 minutes, after which the silver jewelry is lowered into the pan for half an hour.

Ammonia

It is better to wipe a silver chain with ammonia, which effectively combats blackening. However, before cleaning, you need to make an aqueous solution from ammonia at home. To do this, add 10-15 milliliters of alcohol to half a glass of water. The liquid is thoroughly mixed, after which the product to be cleaned is placed in it.

Salt

The salt mixture quickly restores the shine of silver and removes dark stains. To create the soaking mixture, mix 20 grams of salt and soda in a container of water. Place jewelry in the prepared soda-salt solution for 45 minutes. After completing the procedure, they are taken out of the container and wiped dry with a rag.

Chalk

To quickly clean silver jewelry, some people use chalk. Before carrying out work, the chalk must be rubbed and mixed with liquid soap and water. The silver is then dipped into the solution and rubbed thoroughly with a stiff toothbrush until it brightens.

Recipe with foil

Foil with baking soda will help quickly get rid of blackening of the silver coating. First you need to prepare a soda solution, which is made from 500 milliliters of water and 50 grams of soda. The mixture is stirred, placed on a gas stove and brought to a boil. Then a small piece of foil and silver are placed in a container with boiling liquid. In just 10-15 minutes, the dark spots will dissolve and the surface will become sparkling again.

Using special store products

Silver chains and other jewelry can be cleaned with special store-bought products. Among the effective solutions that are sold in stores are “Kupel” and “Aladdin”. These liquids are ideal for removing black deposits and other contaminants.

Cleaning with an eraser

If the jewelry has a perfectly smooth surface, you can wipe it with a regular eraser. It is enough to thoroughly rub the metal coating 2-3 times so that not a trace remains of black spots.

Olive oil

Olive oil will help whiten a dirty silver chain. Experts advise using unrefined oil, which has a greenish tint and a characteristic odor. When carrying out the procedure, carefully moisten a napkin in oil and use it to completely wipe the chain.

Ammonia

The simplest method for removing dark plaque is the use of ammonia. When restoring the silver coating, ammonia liquid is taken into a glass, after which jewelry is placed in it. After 25-30 minutes they are taken out and rinsed.

Hydrogen peroxide

Hydrogen peroxide is used together with ammonia. Add the ingredients in equal quantities to a saucepan and add a liter of water. Then place metal decorations in the pan for 20-25 minutes and cover with a lid. After this, they are washed several times in water and dried.

Nuances of cleaning products

Every person who plans to clean jewelry should familiarize themselves with the nuances of this process.

With rocks

Before cleaning a cross or earrings with stones, you need to familiarize yourself with how to do it correctly. If the products contain sapphire stones, they can be treated with shampoo or regular washing powder diluted in heated water.

Stones such as turquoise or malachite have a lower density and therefore cannot be cleaned with powder. Instead, it is better to use laundry or liquid soap.

With gilding

It is recommended to clean a gold-plated silver ring only with dry suede. However, before this, the decoration is thoroughly wiped with a cotton wool or sponge soaked in alcohol. It is necessary to wipe gold-plated items at least twice a month to ensure that there are no greasy stains or dirt on their surface.

If products with enamel

If darkening appears on enamel jewelry, use wine alcohol. It will remove all stains from the surface after the first treatment. To clean enamel jewelry, you need to wipe it with a cloth soaked in wine alcohol.

Matte silver

A blackened product made of matte silver is treated with a regular soap solution. To prepare it, you need to dissolve a small piece of laundry soap in warm water. Then a towel is soaked in the liquid and the jewelry with a matte finish is wiped with it.

Blackened

To clean blackened silver, do not use caustic chemicals that can damage the coating. It is also contraindicated to use ammonia and citric acid. Experts advise wiping blackened jewelry with a saline solution mixed with liquid soap.

With radiated metal

Some silver jewelry is coated with a protective layer of rhodium. It is resistant to chemicals and therefore can be used by any cleaning method. However, brushes and hard materials should not be used, as they may wear off the rhodium layer.

How to avoid damaging or scratching silver jewelry?

Sometimes removing the black is not enough to make the decoration look beautiful. In addition, you need to take proper care of it so that there are no scratches on the coating. There are several tips that will help you avoid damaging your silver items:

• Careful use. All jewelry should be used carefully and with care so that it always looks great. Therefore, you should not frequently treat them with chemicals or expose them to too low or high temperatures. It is also necessary to protect them from mechanical influences.
• Proper storage. The presentable appearance of silver items can only be preserved if they are stored correctly. Earrings, rings and chains should be placed in special lockable boxes with soft upholstery inside. Decorations should not be placed on top of each other to prevent them from being scratched.

What can I do to prevent the metal from darkening in the future?

To prevent the jewelry from darkening in the future, the following procedures must be carried out to help preserve its appearance:

• Monthly house cleaning. You should clean all your silver jewelry yourself at least once a month. Even if there is practically no dark residue visible on the coating, it is still better to clean it. If you don't do preventative cleaning for a long time, the surface will become covered with dirt, dark spots and grease.
• Appeal to professionals. There are specialists who professionally clean jewelry. Their services are used if you cannot restore the silver coating yourself. Jewelers will be able to breathe new life even into those items that have not been cleaned for years.

Conclusion

Many people have silver jewelry that they use in everyday life. If you care for them incorrectly, they become covered with a dark coating, which is sometimes difficult to get rid of.

To restore silver, you need to become familiar with the basic cleaning methods and the features of their use in practice.

Source: https://hozzi.ru/chistka/kak-pochistit-serebro

How to effectively clean silver at home: tips and nuances

Almost every woman has elegant silver jewelry - chains, rings, earrings, bracelets, cuffs, pendants.

Silver is a beautiful metal with a soft, radiant shine; many attribute it with magical properties. Modern designers use silver to create interesting, original jewelry both for every day and for exceptional holiday occasions.

Silver is a noble metal, which means it is not subject to corrosion and oxidation. However, over time and exposure to a number of negative factors, silver jewelry loses its pure shine, becoming dark and tarnished. How to clean silver at home so as not to spoil the items and restore their beauty?

Over time, all silver items darken or tarnish and require special cleaning.

Metal quality

Before you start cleaning your silver item, you need to check the hallmark displayed on the jewelry. If earrings, chains, rings, pendants and other jewelry are made not of high-quality silver, but of alloys, home cleaning can irreparably damage the appearance. In this case, it is better to take the jewelry to a jewelry workshop for cleaning.

Not all items should be cleaned at home; sometimes a jewelry workshop is the best option.

Attention! You should be especially careful and careful if the product is decorated with enamel inserts, rhinestones, or contains elements made of gold and other metals.

Jewelry decorated with pearls, amber, turquoise, and corals can only be cleaned with ammonia or medical alcohol.

You need to be especially careful when cleaning jewelry with stones.

Cleaning methods

For high-quality silver items, you can purchase special jewelry cleaning products and pastes, as well as wipes.

However, to effectively refresh the appearance of your jewelry, you can use a variety of products that are always on hand in the household, such as:

• vinegar;
• beer;
• soda;
• salt;
• milk;
• ammonia;
• lemon acid;
• potato;
• eggs.

There are many ways to clean silver with inexpensive and accessible means that can be found in any apartment.

You can also use toothpaste or powder, hygienic lipstick, and an eraser. Food foil is indispensable when processing silver jewelry at home.

Important! Do not use any abrasive substances - they will scratch the coating, and the silver jewelry will never have a clear, clean shine.

You need to clean silver carefully and be patient, because rushing in this matter is inappropriate.

Whatever method of cleaning silver you choose, you need to do it very carefully.

Now let’s learn more about how to clean silver from blackness at home.

This is the simplest and least labor-intensive method. A 3-9% solution of table vinegar is used, but the essence cannot be used so as not to spoil the decoration. Vinegar is suitable for cleaning any silver items, including those with stones. The decoration is placed in vinegar for 20-30 minutes, for the best effect and for severe contamination - for 1-2 hours. Afterwards, you need to rub the jewelry using suede.

The easiest way to clean silver is to use table vinegar.

The method given above also works effectively if you use beer instead of vinegar. Of course, you can’t drink this beer afterwards!

Beer effectively removes stains on silver items

Baking soda is great for removing stains. However, soda powder is too rough for a delicate silver surface, so you must make a solution or slurry from soda:

1. To 1 part water - 3 parts baking soda. You can wipe the product with this composition or boil it for 5-7 minutes.
2. Add 20 g of soda to a glass of water, bring the solution to a boil, put the decoration there for 15-30 minutes, then dry.

In order to clean silver with soda, prepare a water solution into which the jewelry is immersed for 15-30 minutes.

In this case, food foil will come in handy. It must be placed at the bottom of the container, and decorations are placed on the foil.

Table salt helps to quickly clean silver items. The easiest way is to pour fine salt into a soft cloth and wrap silver jewelry there. The package is placed in a container and filled with water. After 1-2 hours the products will be clean.

Salt is a simple and effective remedy in the fight against stains on silver

There is another option that has been helping silver lovers tidy up their jewelry for many years. A paste of salt and soda mixed with a small amount of water is laid out on a piece of foil. Silver items are placed on top. After half an hour, the composition is washed off with cold water, the jewelry is dried and wiped dry with a napkin.

You can clean silver items by boiling them in a saline solution.

An effective way to get your favorite silver jewelry back to its original appearance is to:

1. Mix 10 g of salt, soda and any dishwashing detergent, add 0.5 liters of water.
2. The decorations are boiled in this solution for half an hour.
3. Cool, wipe until shiny.

The milk method does not require much time, and the risk of ruining your favorite jewelry is minimized! A chain, pendant, ring or earrings are placed in milk and boiled for several minutes, then allowed to cool and washed with running water, wiped dry - and everything is ready.

A wonderful remedy that helps out in many difficult cases is ammonia. How you can use it to process silver products:

• The simplest thing is to wipe with ammonia using a soft cloth;

A napkin soaked in ammonia perfectly removes dark deposits on silver

• grated chalk is mixed with ammonia until it becomes a paste, this mixture is applied to the decoration and wiped;
• 10 drops of ammonia are diluted in a glass of warm soapy solution, chains and rings are lowered there, and held for 10-15 minutes;
• you can increase the concentration of ammonia by 2 times and leave the jewelry for about half an hour;

Also, to clean silver, ammonia is added to the soap solution.

• heavily blackened silver is dipped into an undiluted solution of ammonia and kept for no more than 10 minutes.

Attention! When working with ammonia or its solution, it is necessary to close the container with a lid to avoid contact of alcohol vapor with the mucous membrane.

If the product is richly decorated with inserts, it is advisable to use medical alcohol. You can simply hold the jewelry in it for 1-2 hours or rub it with a cotton swab.

Citric acid is also a good and simple way to help bring silver items into order.

Citric acid is a wonderful tool that helps restore shine to silver items.

The most common use of citric acid is as follows:

1. 100 g of citric acid is diluted with 0.5 liters of water.
2. Decorations are placed in a container on foil.
3. Boil in lemon solution for 5-15 minutes.
4. Wash, dry and wipe dry.

Many people advise adding a copper product or wire to the solution.

This product is great for removing tarnish from silver.

Potatoes contain a large amount of starch, which is great for removing stains and blackening from silver jewelry.

The starch contained in potatoes can effectively clean silver

How to use potatoes:

1. Grate 1 potato, add cold water, put the decorations on for 1-2 hours.
2. You can use cleanings; they are also filled with water and silver is placed there.
3. The potato broth is cooled and silver items are placed in it for 2-3 hours.

You can clean silver in an interesting way - using ordinary chicken eggs. How it's done:

1. The yolks are separated from the whites and beaten.
2. Add 1 tbsp to the yolks. l. Whitening products "Whiteness".
3. The products are treated with a napkin soaked in the resulting solution.

Egg yolks mixed with “Whiteness” will return silver jewelry to its original appearance

It has long been customary to use tooth powder to clean metal, including silver items. However, the powder can cause scratches, so it is better to replace it with white toothpaste. The paste should be the most common one, without additives; gels or colored ones are not suitable.

Toothpaste is the most popular silver cleaner.

The silver is laid out on a napkin and cleaned with a cloth, a cotton swab or a soft toothbrush. Then the jewelry should be washed, blot off excess moisture and dry.

Old chapstick will still serve to restore the beauty of silver jewelry. To do this, lipstick is applied to a napkin or directly to the jewelry and rubbed. However, we must take into account that embossed chains or earrings can be difficult to get rid of lipstick residue. Lip gloss is not suitable for these purposes either.

Hygienic lipstick copes well with stains on silver

If the stains are minor, you can use a regular eraser. It treats the entire surface of the decoration. This way you can quickly get your items in order.

If the product is slightly dirty, then a regular office eraser can help.

How to store silver jewelry

In order not to have to spend a lot of effort and money on restoring the original beautiful appearance of expensive silver jewelry, you must remember that there are also storage rules for silver. If you follow them, your silver items will look new, shiny and clean for a long time.

The rules are simple:

• Do not store or wear silver in places with high humidity (beach, pool, sauna).
• Do not store jewelry near medications.
• After removing silver jewelry, you should wipe it with a soft cloth, removing any remaining sebum, sweat, and moisture.

Special boxes will help organize proper storage of jewelry

• When storing items, you should not put them in one pile; you should carefully lay out or hang the chains, use cases lined with soft suede for rings, and boxes for earrings. You can purchase a special chest to store your jewelry.
• If a piece of jewelry is rarely worn, it can be wrapped in foil to prevent contact with air.

You may also find these articles useful:

Source: http://mvkursk.ru/oformlenie-doma/kak-v-domashnih-ysloviiah-effektivno-pochistit-serebro-sovety-i-nuansy.html

How to clean silver at home

Silver items may turn black after a while. To clean them at home, various methods are used. You can purchase a special cleaning product at a jewelry store, and some people independently prepare a solution for cleaning silver from available non-aggressive acidic and alkaline substances.

Foil for cleaning silver

Tarnished silver is often cleaned using foil. It contains aluminum, which neutralizes sulfides - sulfur compounds of the metal. As a result, the black plaque is destroyed.

Method 1:

• Cover the bottom of the pan with foil and pour 4-5 cm of water;
• put 3-4 tbsp into the liquid. l. soda or citric acid;
• place silver jewelry in the solution;
• put the pan on the fire;
• bring to a boil and cook for 10 minutes;
• if such a need arises, the procedure time is increased.

Method 2:

• cut off a sheet of foil and place a silver item on it;
• fill the product with 3-4 tbsp. l. salt and add 1 tsp. water;
• the sheet is rolled into an envelope and placed on the bottom of the pan;
• prepare a soap solution using 1 tsp. shavings of laundry soap and 200 ml of water;
• pour the prepared solution into a container with foil and bring to a boil;
• Remove the pan from the heat, cool the water and remove the silver.

Method 3:

• take a deep plate;
• line the inside of the container with foil and fold the edges with it;
• put a silver item in a plate and cover it with baking soda;
• add boiling water and wait 10 minutes;
• The silver is taken out, washed in water and wiped dry with a towel.

Silver cleaning eraser

You can remove dark deposits on silver using an ordinary eraser. To do this, carefully rub the soft side over the contaminated area for 4-5 minutes.

The nuances of cleaning products with stones, gilding and other features

If a silver piece of jewelry that has a precious stone has turned black, you should choose the right cleaning agent:

• emerald and sapphire are highly dense, so they use washing powder or mild shampoo;
• moonstone and turquoise are also cleaned with mild shampoo and laundry soap;
• topaz and ruby ​​- shampoo, but should not be exposed to hot water.

Glycerin can be used for any type of stone. Stones that are particularly sensitive cannot be cleaned with acids and alkalis. They damage their structure.

Blackened silver is removed from plaque with hydrogen peroxide or ammonia. Foil and soda show high performance. This is explained by the fact that blackened silver contains substances whose interaction with such irritants shows a good effect.

If the silver has a matte surface, it is better to use the services of specialists for cleaning. Almost all products that are used at home cause severe harm to such a product.

Silver plated with gold must be cleaned with extreme care. Such products are treated with alcohol solutions. You can immerse silver in beer for 25 minutes. A soap solution to which 2-3 drops of ammonia is added gets rid of dark plaque well.

You can clean a watch with a silver bracelet at home using microfiber or suede. Apply a few drops of hydrogen peroxide or ammonia to a piece of cloth and wipe the product. If you need to clean radiated silver, do not use products containing ammonia. Mechanical cleansing is prohibited, so you cannot use a toothbrush. For the procedure, take ordinary glycerin.

What to do to prevent silver from tarnishing

To prevent silver items from tarnishing, they must be stored correctly. If there are several silver objects, they are placed separately from each other, otherwise the metal may be scratched, and dirt can enter through the damage. It is not recommended to shower wearing silver jewelry. Due to chlorinated water, they become covered with a dark coating.

It is also prohibited to engage in sports while wearing silver items. In this case, the human body produces a lot of sweat, which contains sulfur. Its interaction with metal leads to the appearance of blackness. Do not store silver near heating devices or expose them to direct sunlight. Because of this, it darkens.



Source: https://uborka-v-dome.ru/pravila-chistki/serebra-v-domashnih-usloviyah.html

How to make silver shine

Silver products, which include jewelry, cutlery, and interior items, lose their shine over time and may become covered with dark spots. The reason is the oxidation process, chemical reactions upon contact with various substances.

The darkening of silver is actively promoted by:

• moisture;
• cosmetics;
• sweat;
• food;
• household chemicals, etc.

Knowing how to make silver shine at home, it will not be difficult to maintain the attractive appearance of jewelry and household items.

Cleaning Rules

To clean a silver product without damaging the metal surface, two main methods are used:

• mechanical cleaning;
• soaking in a solution with active ingredients.

The mechanical method is used when cleaning cutlery and household items - silver coasters, candlesticks, etc. It is important to choose the right cleaning agent, which should not be abrasive, otherwise the surface of the product will become covered with tiny scratches and will need polishing.

https://www.youtube.com/watch?v=OjKogbTsmxs

For mechanical cleaning you will need:

• soft cloth napkins;
• powdered or paste-like product (soda, tooth powder or paste, chalk, etc.);
• an old toothbrush or other brush with semi-soft synthetic bristles.

Under no circumstances use sponges with an abrasive layer, metal brushes, scourers, or rough cloth!

The soaking method involves the use of substances that can not only remove dirt and grease from the surface, but also rid the silver of the oxidized layer. Avoid using household chemicals that are not designed for cleaning silver items, as they may contain substances that can worsen the problem.

The maximum effect of soaking is achieved if the product is pre-washed with soapy water to remove traces of grease and other contaminants. In this case, the chemical reaction that helps eliminate the oxide film takes place intensively over the entire treated surface.

Initially, when starting to clean with home remedies, choose the best way to restore your silver to its former shine. When deciding what to clean to make the silver shine, consider:

• the presence of a sample on the product;
• alloy composition;
• product size;
• type and purpose of the thing;
• the presence of precious stones, gilding, enamel inserts, etc.;
• degree of pollution.

Please note: aggressive household products are suitable for cleaning silverware, household items and simple inexpensive jewelry. It is recommended to entrust the cleaning of expensive finely crafted items, primarily fine jewelry with hallmarks, to professionals or use proven means for cleaning silver jewelry. Such formulations are usually available in spray form.

Mechanical cleaning of silver

Cleaning and polishing the metal using soft powders and pastes will help make your silverware shiny. They can also be used to care for simple jewelry. The most common means of mechanical cleaning are:

• Baking soda. Pour baking soda into a small container and add a small amount of water to make a paste. Apply moistened soda with a soft cloth to the surface of the product and rub vigorously.
• Chalk. Only high-quality white chalk without hard inclusions that can leave scratches is suitable. It is used in a similar way to soda.
• Tooth powder or white toothpaste (not gel). When cleaning with paste, it is convenient to use a brush. This cleaning option is considered more delicate compared to using chalk or soda.

To remove tarnish from solid silver items, use a mixture of toothpaste with baking soda and a few drops of ammonia. The product will cope with metal oxidation. After mechanical cleaning, the product should be thoroughly rinsed in a stream of cool water and wiped dry with a soft cloth.

Soak

When considering how to make silver shiny, pay attention to safety precautions. If you use caustic substances with a strong odor, be sure to wear protective rubber gloves and ensure the room is ventilated by opening a window or turning on the hood.

Ammonia

Products washed with soap are dipped in ammonia solution in a container that can be tightly closed with a lid and shaken. Soaking lasts 30-40 minutes, shake the container periodically during this time. After processing, the products are washed with cold water.

If necessary, to remove individual dark spots from the surface of a silver object, simply moisten a soft cloth with ammonia and wipe the problem area.

Ammonia has an unpleasant, pungent odor, and if you are individually intolerant to it, use any other cleaning method.

Acetic acid

To prepare the solution, table vinegar or essence is used; in the second case, a minimum amount is required so that the composition does not become overly concentrated.

Table vinegar 6% is poured into a metal container and heated on the stove. Jewelry or other silver items are placed in the warm liquid. After 15-20 minutes, wipe with a soft cloth or a piece of natural wool.

Important! This method is contraindicated for jewelry with organic stones, corals, and pearls. Acetic acid will spoil the appearance or destroy decorative inserts.

Hydrogen peroxide

Used for products made entirely of metal, without decorative inserts. The soaking solution is prepared from hydrogen peroxide and alcohol in a 1:1 ratio. After soaking for twenty minutes, the jewelry is wiped with a lint cloth.

Aluminium foil

To get sparkling silverware and jewelry, use food foil, torn into palm-sized pieces. Warm water is poured into a glass or ceramic container, baking soda is dissolved and foil rolled into loose balls is thrown in. The products are soaked for 15 minutes and then washed.

To remove old dark deposits, pour baking soda onto a sheet of foil, place the product soaked in water, and wrap it in foil. After half an hour, unwrap and rinse the cleaned shiny item.

Source: https://VsePoDomu.ru/uborka/chem-chistit-serebro-chtoby-blestelo/

How to clean silver at home quickly and effectively | Everything will be fine

15.05.2019

It also happens that after long wear, silver turns black. Read how to clean silver at home and why it turns black.

Most often, silver turns black due to high humidity in the room in which the jewelry is stored. Darkening of jewelry also occurs with prolonged contact with skin. Moreover, the speed of the process is individual in nature - on one person silver may not darken for years, but on another it will darken in a matter of days. This usually indicates health problems .

Also, a change in the color of silver and loss of shine can occur upon contact with cosmetics and substances containing sulfur ions. Rapid darkening of silver occurs upon contact with household gas, rubber, onions, egg yolks, table salt and some detergents.

 To restore the precious metal to its former shine, you need to know how to properly clean silver , and this can be done at home .

More on the topic: How not to buy jewelry instead of gold? Advice from Taras Shpyra

Of course, you can buy a special silver cleaner at a hardware or jewelry store, but it is not cheap. Therefore, it is much better to use proven folk remedies, which are likely to be found in every home. It is worth noting that silver is a fairly soft material, so aggressive cleaning agents with abrasive particles should be avoided.

Simple methods for cleaning silver

For the first method you will need water, baking soda and foil . Dilute 1-2 tablespoons of soda in 500 ml of water, put this solution on the fire and, when the water boils, put in silver and a piece of ordinary food foil. In 10-15 minutes the silver will shine like new!

The second method will help get rid of various layers on the jewelry. First make a solution: for 1 liter of boiled water you need 50 grams. soda Take a pan, line the bottom with foil and place the silver in it. Then fill the decoration with this solution. The reaction of soda and aluminum with silver sulfide will help get rid of blackness and deposits on jewelry.

Instead of soda, you can also use salt (1 tsp per 200 ml of water): in this case, you will have to soak the silver for a couple of hours or boil it for 10-15 minutes.

How to clean silver at home with alcohol

One of the most common silver cleaners is ammonia. So, prepare a solution - 2 tablespoons of ammonia per liter of water. To enhance the effect, you can add a little hydrogen peroxide and soap to the mixture. Soak your silver items in the solution for 15 minutes and then wipe them with a lint cloth.

More on the topic : How to clean a mattress from stains: tips from Konstantin Grubich

How to clean silver at home with citric acid

will help restore shine to jewelry and remove plaque . Dilute 100 grams of citric acid in 0.5 liters of water and place the solution in a water bath. Place a silver item and a piece of copper wire in it, boil for 15-30 minutes, and then rinse with water.

How to clean silver at home with vinegar

A bite will help get rid of plaque and mold on silver. Heat a 6% vinegar solution, dip a soft cloth in it and wipe the metal. Many also advise boiling the product in Coca-Cola for 5 minutes. Its “useful” composition will help remove dark plaque in a matter of minutes.

How to clean silver at home with lipstick

An effective means for cleaning silver is regular lipstick . Take an old cosmetic product and apply it liberally to your jewelry. Then wipe thoroughly with a cotton pad. This method will help you clean your jewelry from blackness without any extra effort! But there is one drawback: cleaning jewelry only with a smooth surface will be effective.

Using the same principle, you can use toothpaste : apply the product to a soft-bristled toothbrush, rub the jewelry with it, and then rinse in warm water. After this, polish the jewelry with a soft cloth.

More on the topic : How to cleanse your aura: advice from Yana Pasynkova

How to clean silver at home using egg yolks

Another simple means of cleaning silver is egg yolks . Soak a cotton pad in the yolk and rub it onto the surface of the jewelry. Then leave it to dry for a couple of minutes and rinse with warm water.

If radical cleaning of the silver is required, use an abrasive such as toothpaste and a brush. It is best to mix water with ammonia and tooth powder in a ratio of 5:2:2. Rub the product with a brush with this composition, and then rinse with water. But it is worth noting that, despite the effectiveness of such cleaning, it is quite rough and scratches the surface of the precious metal .

Read more interesting news on Viber Everything will be fine

Source: https://dobre.stb.ua/ru/2019/05/15/kak-pravilno-chistit-serebro/

How to clean silver to make it shine - Cleanliness Club

Silver is a magnificent noble metal, found in nature in large nuggets and mixed with other metals. Its chemical activity is greater than that of gold, therefore in jewelry it is often used in the form of alloys with copper. Silver is ductile, perfectly cut, polished, twisted, and rolled into the thinnest plates.

These features of silver, at a relatively low cost, make it the No. 1 metal for the manufacture of cutlery, jewelry, and interior items - ashtrays, figurines, and decorative elements. The highest quality 925 silver is called sterling. It is an alloy of pure silver with a small percentage of copper. It is ideal for making tableware and jewelry.

 Rhodium plated silver is very resistant to mechanical stress and corrosion. The thinnest coating of precious white rhodium gives the products an expressive brightness.

Blackening is an incredibly beautiful and unusual way of finishing silver. Treating the surface of engraved silver objects with lead and copper oxides allows you to create exquisite patterns. With all the advantages of this metal, it has an unpleasant feature - silver products darken, sometimes so much that they become almost black. Why does this happen, and how to clean silver when it turns black?

Causes of silver blackening

Silver jewelry is made with the addition of copper. Under the influence of sweat and moisture, copper oxidizes. The silver sulfide deposit that forms on the surface thickens and darkens over time.

Intense sweat production during sports, hormonal changes (for example, during menopause), and active physical activity accelerates the process of darkening of jewelry, especially in the area of ​​​​a large number of sweat glands - on the chest. Changes in the color of silver items occur due to illness or when taking medications.

There is no mysticism here; the blackening is associated with skin secretions. When going to the beach, pool, or bathhouse, it is better to take off your silver items. Are the decorations already blackened? Try cleaning them yourself.

Cleaning silver with soda

Having wondered how to clean silver from blackness at home, go to the kitchen. There will definitely be soda, ordinary baking soda, it is added to the dough so that it rises. Advice! Before cleaning silver with soda or any other means, wash the items with soap and warm water, dry on a napkin or wipe with a soft cloth. Prepare in advance:

• container for solution;
• a soft toothbrush (an old one will do just fine);
• baking soda (sodium bicarbonate);
• salt;
• aluminum foil.

Method 1. Mix baking soda and water in a container to a paste-like consistency. Using a toothbrush, apply the mixture to the product and brush it vigorously. Place a pendant or chain directly on the countertop and brush over it several times with a toothbrush.

Turn over to the other side and peel again. After rinsing the cleaned jewelry under running water, wipe dry with a soft cotton cloth. The main thing is not to use hard metal objects or abrasive sponges during the cleaning process.

The kitchen countertop will not only not be damaged by soda, but will also be cleaned perfectly.

Method 2. Mix salt and soda in equal proportions, add a little water, mix into a thick paste. Apply the resulting mixture to the product for 10 minutes. Then rub vigorously with a soft cloth, hands or toothbrush. Rinse the cleaned product and wipe dry. This method is good for embossed products. Salt, getting into the relief lines of the surface, perfectly cleans them.

Method 3. Pour two glasses of water into a container, add two tablespoons of soda. Bring the solution to a boil. Wrap the silver item in foil and dip it in a soda solution, boil for 15 minutes. Cover the top of the saucepan with foil as well. After 15 minutes, remove the product, rinse, and wipe dry with a soft cotton cloth. Soda recipes not working? Try cleaning silver with ammonia.

Cleaning silver items with ammonia

Cleaning silver with alcohol is very easy. After cleaning with soda slurry, place the decoration in water with ammonia. The proportion for preparing the solution is 1:10, i.e., for 10 parts of water, one part of alcohol (for 100 ml of water, 10 ml of ammonia). Soak the product in the solution for 45-50 minutes, remove, rinse with fresh water, and wipe dry.

Are you looking for a way to clean your silver to make it shine? The ideal option is ammonia + tooth powder + water.

Mix in a container two parts ammonia, five parts water, one part tooth powder (50 ml water, 20 ml ammonia, 1 heaped teaspoon of tooth powder).

Soak a flannel/cotton cloth in this mixture, thoroughly rub the silver item with it, rinse with clean water, and wipe dry. With thorough cleaning and following the proportions of the mixture, the product will acquire an extraordinary shine.

You can really achieve an amazing shine by mixing crushed chalk and ammonia. Apply a mixture of alcohol and chalk to the silver surface and let it dry. Clean the dried solution with a soft cloth (optimally a piece of suede). Rinse the items brought to a perfect shine and wipe dry.

Cleaning methods with citric acid, vinegar, lemon juice

The simplest thing is to soak the silver object for some time in a strong solution of citric acid, followed by obligatory rinsing with clean water.

Heating in a water bath cleans more effectively. Heat a solution of 100 grams of citric acid and half a liter of water in a water bath, add 10-15 cm of copper wire to it, put in silver objects and leave for 10 to 30 minutes, periodically removing the jewelry to check the degree of their cleansing. To add shine, rinse the silver well in a cold soda solution and wipe thoroughly.

You can replace citric acid with lemon juice, and a vinegar solution will come in handy if a greenish coating appears on the silver. Objects are placed in a warm acidic solution, kept until completely cleansed, then washed and dried.

Is it possible to clean silver with hydrogen peroxide?

Peroxide gives up an oxygen atom to oxidize or reduce the substance. Silver products are made from various alloys. Some are restored by peroxide, while others, on the contrary, are destroyed. During restoration, the surface of the silver product will lighten and shine, and during the oxidation process it will become stained and darken.

Before cleaning silver with peroxide, test its effect on your jewelry, for example, inside the ring, by wiping it with a dampened cotton swab. If the jewelry is valuable and is not worth the risk, you can resort to other cleaning methods. It is better not to use “killer” chemicals, sulfuric acid, formic acid at home.

They require additional safety measures and special care when using.

Interesting ways to clean silver:

1. With the help of sodas containing phosphoric acid - Sprite, Cola, Pepsi. Pour the drink over the silver item, heat it, and boil for 10 minutes.
2. Polishing with a regular eraser. Rub the object vigorously with an eraser on all sides. This cleaning is not suitable for embossed and openwork surfaces; recessed lines are inaccessible to the eraser.
3. Using household chemicals - window cleaner. Apply detergent to the product and polish with a soft cloth.
4. Lipstick. Apply lipstick to the entire surface of the jewelry and polish with a soft flannel cloth.
5. Raw potatoes.

   Pour a small amount of water over the potatoes, peeled and chopped, add silver items there, wait a few hours, then remove the items and wipe them.

6. Potato broth. Place silver jewelry in the potato broth, leave for 15 minutes, then dry with a soft cloth and rub with a piece of woolen cloth.
7. Cigarette ash.

   Boil silver items in water with added ash or rub with a piece of soft cloth dipped in lemon juice and ash.

8. Water from boiled eggs. After boiling the eggs, place the silver in water and keep the items in it for as long as needed for cleaning.
9. Curdled milk.

   Immerse silver jewelry in curdled milk, leave until completely clean, rinse and wipe thoroughly with a cotton napkin.

10. Toothpaste. Squeeze the paste from the tube onto an old toothbrush, thoroughly clean the product on all sides, rinse and wipe.
11. Cosmetic powder – compact or loose.

    Apply the powder to a piece of fabric (velvet, suede), and thoroughly polish the metal. Rinse and wipe.

Cleaning associated with boiling, soaking, and treatment with solutions is not suitable for exclusive silver jewelry with decorative enamel, gilding, pearls, and stones. It is wise to use strong chemical and abrasive products for simple jewelry. You should entrust the cleaning of expensive, exquisite items to a professional; it is better to take them to a jewelry workshop.

Jewelry stores and household chemical stores sell silver cleaning products - Silbo, Talisman, Aladdin. Products developed for this purpose are produced in the form of wipes, sprays, pastes, solutions; they clean products quickly and effectively. When using them, it is important to carefully study the instructions and follow them exactly.

Advice! After cleaning your silver jewelry, do not wear it immediately, but let it sit for a few days. Freshly cleaned silver is more susceptible to dirt and gets dirty and darkens faster.

Store silver in a specially designated place so that the items do not touch or scratch each other, preferably in separate bags or cases. Keep silver items separate from items made of other metals. The storage place should be dark and dry. From moisture and light, silver darkens and loses its shine.

Do not store silver close to heat sources and avoid sudden temperature changes. Even under perfect storage conditions, silver loses its beauty without use. Wear your favorite silver jewelry more often! This metal only gets better with constant wear.

And our tips for cleaning silver will help you keep it in perfect condition.

Source: https://chistoclub.com/sovety/chem-chistit-serebro-chtoby-blestelo/

How to clean silver from blackness

Everyone knows that silver can darken. Sometimes there are good reasons for this, and sometimes it is blacker for nothing, even when stored and worn correctly. To quickly restore the beauty of metal, you need to know how to clean silver from blackness at home.

• Toothpaste. This is the most elementary method and accessible to everyone. Apply a little paste to a soft toothbrush and use it to clean off dirt from the silver. It is very important to use only a soft brush; if you don’t have one, you can use a cloth or napkin. To make it easier to wipe off the blackness, you can apply a paste to the silver and clean it off with a cloth after 5-10 minutes. Clean silver items are washed to remove the paste and wiped with a dry cloth.

  How to clean silver from blackness using foil and soda

• Vinegar . This is another option to remove the blackness. To do this, a little table vinegar is heated to +45 degrees and the silver is soaked in it. It should be soaked in vinegar for a quarter of an hour, then it can be taken out.
• With foil . How to clean silver at home is of interest to all housewives. There is one very simple and interesting method. Take 15 g of soda per glass of water. A crumpled ball of foil must be placed in this liquid and placed on the stove until it boils, then silver jewelry is placed there for 60 seconds and taken out clean.
• baking soda to restore the shine of silver. A thick paste is mixed from soda and water. It is necessary to rub silver items with it. After 15 minutes, you can wash off the soda and admire the result.

Important!

Silver is often washed with soda, but you should understand that silver is a soft metal, grains of soda can scratch it. So it is better to use this method as little as possible.

• Ammonia and peroxide It's quite easy to remove the blackness. For a glass of water, take half a tablespoon of ammonia and peroxide. Silver is dipped into the resulting liquid for a quarter of an hour. As it oxidizes, the metal will react with ammonia and the blackness will disappear.

  Baking soda is also easy to restore the shine of silver

• Lemon acid . Pour 250 ml of water into an enamel container and add 50 g of citric acid. This mixture must be placed in a water bath. Silver items are placed on a copper stick so that there is direct contact between copper and silver. The structure with silver is placed in liquid in a water bath for a quarter of an hour. The decorations are boiled until they lighten.
• Vinegar solution . For ½ cup of boiling water, use the same amount of vinegar. Foil is placed at the bottom of a small bowl and 1 tbsp is poured on top. l. soda and salt, and then pour in a water-vinegar solution. Silver is placed in this mixture so that it is in maximum contact with the foil. In just 5 minutes, the mixture will clear silver from darkening.
• Coca-Cola is used to clean various things and metal as well. The silver needs to be soaked in it for half a day, then taken out, rinsed and wiped with a cloth. After this procedure, a chain with small links, a ring, a cross, or any other decoration, including cutlery, will shine like new, and the blackness will disappear.

Silver turns black most quickly when in direct contact with sulfur. So if possible, you should avoid such a combination and use silver items carefully, then they will not turn black for a long time.

How to clean silver to make it shine

It often happens that you managed to clean silver at home, but you couldn’t achieve shine, what should you do? The easiest way to make silver shine is to use special products.

To make silver shine, for example, Aladdin and Sunlight preparations are suitable.

• Liquids for cleaning valuable metal contain fragrances, water, phosphates, surfactants, and organic solvents, so they always work well. There are many such products on sale. For example, the drugs “Aladdin” and “Sunlight” are good. They quickly clean silver and restore its shine, but may have an unpleasant odor. Use these products only as directed.
• Napkins also help a lot. There are special ones that are sold in stores or on the Internet; they always indicate what metal they are intended for and provide detailed instructions for use. They can be reusable or disposable, depending on the type. Usually they are used simply to rub silver until it shines.
• Jewelry paste is also suitable for cleaning silver. It comes in different types, for metal products, matte, with stones or other types. It is quite gentle, has a gentle effect and does not scratch. Typically, this mixture is smeared on the metal and left for a while, then cleaned with a cloth.

These specialized products can be used without fear. Of course, you need to spend money on purchasing them, but they do the job efficiently and quickly and make the silver shine and not just look clean.

Important!

To prevent silver from getting too dirty, it should be stored in separate soft boxes or bags.

How to clean gold-plated silver

How to clean gold-plated silver

Silver with gilding is not uncommon. Such products are cheaper than gold, but look expensive, just like pure gold. However, the gold plating can come off if not cleaned correctly. Abrasives will easily remove gold, so it is best not to use them. In addition, it is advisable not to take brushes for cleaning; it is better to use a cloth (suede).

To remove plaque and dust, you can dip a cloth in alcohol or a light solution of vinegar (a glass of water, 2 tablespoons of 8% vinegar) and wipe the gold plate. If souring is necessary, you can pour beer into a cup and put the product there for half an hour. After time, the silver is taken out and wiped with suede until it shines.

In case of severe contamination, make the following solution for cleaning: a glass of warm water, 5 g of soap and 6 drops of ammonia. The gold-plated silver is soaked for up to half an hour and the result is enjoyed.

Cleaning enamel products at home

Cleaning silverware with enamel at home

Various enamel designs are often used as decoration on silver. They make the product unusual and interesting, but because of the same enamel, such jewelry is much more difficult to clean.

Enamels should not come into contact with most cleaning products. So they are excluded immediately. Strong temperature changes are also dangerous for her. But how then to clean such decoration?

To wash silver with enamel, use cool water with 3-5 drops of ammonia. After washing the product, you need to blot it with a soft cloth. For darkening, you can use a little tooth powder.

Important!

When using tooth powder or toothpaste, you need to wash the silver carefully so as not to leave scratches.

Cleaning silver items with stones

Minerals are often inserted into silver items. They add additional shine and nobility to silver and increase its value. The demand for such goods is always high. But how to effectively clean silver with inserts? In order not to harm the mineral, it is worth using gentle methods.

Cleaning silver items with stones

• If the stone is hard, like sapphire, aquamarine, emerald, diamond, it can be cleaned using any method.
• Ruby, topaz and garnet are washed exclusively in water of medium temperature!
• In the case of malachite, opal, moonstone, turquoise, it is worth using soft washing solutions and baths. Abrasive substances can cause harm.
• Amber, pearls, and coral do not tolerate cleaning with vinegar or any corrosive preparations. A silver chain, cross or other jewelry with stones is usually simply washed in plain water or taken to a jeweler for cleaning.

Do not forget that in products with minerals, most of the dirt accumulates in the place where the stone is attached, that is, in the most inaccessible places. But you shouldn’t be too zealous about washing out the blackness in the place where the mineral is attached, because if the stone was attached with glue and the metal doesn’t hold it in any way, it will simply fall out. If you want to return your jewelry to its original beauty, it is better to use the services of a professional jeweler.

How to clean blackened silver

How to clean blackened silver

The blackened silver created by the jeweler is striking in its beauty. Certain parts of such products have a typical silver color, while others are darkened, black, like old, darkened silver. But how to clean such silver so that the very blackness that attracts attention so much, for which this silver is valued, is not lost?

Cleaning blackened silver is carried out very carefully so that the top layer is not damaged. To do this, take a soap-soda mixture. Pour a tablespoon of soap shavings and a teaspoon of soda into a glass of water. Silver is dipped into this liquid for no more than half an hour and then taken out.

Interesting!

A silver chain, cross, bracelet with an abundance of small parts should be cleaned with special soft brushes. In this case, dirt is removed not only from above, but also between the links, in hard-to-reach areas.

Another option is cleaning with potato infusion. To do this, you need to peel 2-3 potatoes and put them in a bowl of water. It is also necessary to identify blackened silver there. After 3.5 hours, you can remove the metal and wash it in water. If there is an unpleasant residue left on the silver, it can be removed with a simple eraser.

How to clean matte silver at home

Matte silver has been popular lately. But if you don’t know how to clean silver at home, it will soon stop being dull and begin to shine. So the main rule is not to polish the product even with a cloth and not to use acids or abrasives for cleaning.

The best option is to dilute soap (shavings or liquid soap) in water and use the cleaning solution. A tablespoon of this product is enough for a glass of water. The cleaning will be gentle, it may not be possible to remove all the dirt, but the appearance will not deteriorate.

Silver is used to create a wide variety of jewelry, tableware, and decorative items. And since this metal is never used in its pure form, it quickly becomes dirty and darkens when worn or even if it just lies in one place.

So it is important to know how to clean silver at home. As you can see, there are many methods, depending on the type of product, you can select the most profitable option.

If in doubt, it is better to take your silver to a jeweler to have it professionally cleaned.

Source: https://sapfira.net/kak-pochistit-serebro-v-domashnih-usloviyah.html