How to clean gold earrings at home

How to clean gold earrings

Fashionistas use various techniques to decorate their looks for any event: clothing, accessories and jewelry. Of course, gold earrings have a special place. Not only ladies, but also men can wear earrings made of gold. Over time, plaque may form on the product and dirt may appear, so it is important to know how to clean gold earrings at home.

:

Recommendations for caring for gold jewelry

To ensure that the problem of cleaning gold earrings concerns you as little as possible, you need to provide the products with proper and timely care.

• Contact of gold jewelry with acids and alkalis is prohibited. These components are found in various detergents and modern powders. It is forbidden to wipe the jewelry with nail polish remover, otherwise black spots will appear.
• In the solarium and bathhouse you must be without gold jewelry.
• It is prohibited to store gold earrings and other gold jewelry in cardboard boxes, as this material contains sulfur, which will cause the jewelry to turn black.
• Sometimes it is necessary to clean gold jewelry.
• Before cleaning the house, it is recommended to remove gold earrings, as they may come into contact with hazardous substances. You can also lose your jewelry.
• After you have removed the earrings, you need to wipe them with a flannel napkin. Using rough cloth will result in scratches and other mechanical damage to the surface of the product.
• After each removal of earrings, they should be wiped to remove traces of sweat and cosmetics.

How to properly clean gold earrings

Before you start cleaning your gold earrings, it is important to pay attention to the presence or absence of stones in them. Jewelry with stones must be cleaned in a special way.

In order to clean gold earrings, you will need to follow a number of simple steps:

1. Prepare a soap solution in which to immerse the decoration.
2. Use an old toothbrush to clean problem areas.
3. You can put the diluted solution in a bottle, put the earrings in it and shake it gently, after which it is recommended to send the jewelry to dry on a towel.
4. If the earrings are decorated with stones, then dirt accumulates in the area under them, which needs to be gotten rid of. To perform this procedure, you can use ordinary cotton swabs and an ammonia solution. Soak the sticks in ammonia and wipe the dirty areas.
5. You can use the following home remedy. Prepare a solution of ammonia, detergent and water. This composition cannot be used if the following stones were used to decorate gold earrings: turquoise, coral and pearls. For such earrings, it is recommended to use a water-alcohol solution. It’s easy to prepare: dilute water and alcohol in a 1:1 ratio. Rinse the earrings thoroughly and dry with a flannel cloth.

Traditional cleaning methods

Our grandmothers remember how they cared for their mother's gold earrings. Using traditional methods for cleaning gold jewelry will help you save time and money.

• You can use ordinary tooth powder. Apply a small amount of product to a soft cloth and wipe problem areas. Then wipe thoroughly with a clean damp cloth.
• Egg white and a small amount of beer will help restore your earrings to their original purity and shine. Apply a small amount of the mixture to a flannel napkin and wipe the product.
• Prepare onion juice. Wipe the product with it, then rinse thoroughly and dry with a soft cloth.
• Fashionistas can use lipstick to remove black marks from their earrings. Use a dry and soft swab; use it to apply a little lipstick to the surface of the product and wipe.
• To clean white gold earrings, you must use a solution of water and ammonia. Wipe the product with this composition.
• Prepare water, 15 ml. ammonia, 15 ml. liquid soap, a tablespoon of hydrogen peroxide. Add the listed components to warm water. Wipe the product with the composition.
• To carefully clean gold earrings, you can use a simple recipe: prepare one glass of water, heat it, add 2 tablespoons of soda to the glass. Prepare a deep container; place foil on its bottom. Then place the earrings in a glass and fill everything with a soda solution. Leave in this position for 12 hours, then rinse the product thoroughly under running water and wipe with a soft cloth.

The attractive appearance of gold earrings depends on proper care for them. Clean your items carefully and enjoy the shine of gold!

Source: https://krasna-devica.ru/article/6726-kak-pochistit-zolotye-sergi

How to clean gold jewelry with precious stones

Every woman has jewelry. Some people wear them all the time, while others have rings and bracelets “waiting” for a special occasion.

No matter how often you wear jewelry, you need to know how to clean gold with stones yourself. This must be done regularly, since dust, particles of sweat and other contaminants get on the metal, and being in the box does not guarantee 100% protection against darkening.

How to clean gold earrings with stones

If your earrings or ring are decorated with stones, you need to take into account their features and work accordingly. If you do not know how to properly and safely clean gold with various stones at home, follow these rules:

• do not use hard brushes or abrasives;
• Emeralds, topazes, sapphires and rubies are contraindicated in high temperatures, so they cannot be washed in hot water;
• For garnets, amethysts, opals, rubies and lapis lazuli, a soap solution (or shampoo) and a soft brush are suitable as a cleanser;
• Ultrasonic cleaning cannot be used for turquoise, tourmaline, moonstone, opals and pearls;
• Diamonds are cleaned using soapy water and ammonia;
• chrysolite should not be treated with acid; even cleaning with lemon peel is contraindicated for this stone;
• For turquoise and pearls, high temperatures, humidity, chemicals, ultrasound and mechanical stress are harmful.

You can clean your jewelry from sebum and traces of sweat with cologne or alcohol; you should not do this only in cases where you are dealing with pearls or turquoise.

How to clean gold with cubic zirconia

Cubic zirconia is a stone of artificial origin and is quite resistant to various influences. If you need to clean gold with cubic zirconia, use ammonia or any washing powder. You can also use toothpaste, the main thing is that the composition does not contain abrasive particles.

https://www.youtube.com/watch?v=OjKogbTsmxs

Apply the cleaning agent to the jewelry and gently scrub with an old toothbrush. And then rinse the product under running water. After this, polish the metal and stone with a soft flannel cloth.

How to Clean Gold Diamond Jewelry

Diamond is a durable mineral of natural origin. When cut appropriately, it is very attractive due to its ability to literally “attract” sunlight, the rays of which are refracted on the facets of the stone, creating a unique radiance.

How to clean gold and diamonds? To put this product in order, you can use several methods:

• Wash the jewelry in warm soapy water, clean it with a brush, and then wipe it with ammonia.
• Keep the product for 30 minutes in an ammonia solution (1 teaspoon of product per glass of water), and then rinse under running water and polish with flannel.
• Clean with a paste of 1 tablespoon of crushed chalk and 1 teaspoon of ammonia, then wash the jewelry in soapy water, rinse in running water and wipe dry.

Gold and diamonds need to be cleaned at home once a month, then the stone will look great.

How else can you clean gold with stones?

To clean gold with stones at home, you can use various means, both special-purpose and improvised, inexpensive preparations.

Liquids and sprays for the care of precious metals

Most often these products are sold in sets. Before you start working, you must read the instructions for use.

If it is a liquid, then most often the decoration must be kept in it for a certain time. Sprays are applied to the surface, after which polishing is performed with a special cloth included in the kit.

Saline solution

Remember that no matter how dirty the decoration is, you should never rub it with undissolved salt. It is better to add a few spoons of the product to a glass of water, wait until it is completely dissolved and keep the gold rings or earrings in this liquid for 10-12 hours.

Then you will need to dry and polish the jewelry using a soft cloth.

Sugar syrup

Add a few tablespoons of granulated sugar to hot water (200 ml) and cool the solution. Place your stone rings or earrings in a container of syrup overnight, then rinse and polish them.

Remember that this product will help remove minor stains from jewelry that is regularly maintained and properly cleaned.

Baking soda solution

When preparing the solution, please note that it should not be very concentrated. 1-2 teaspoons of baking soda per glass of water will be enough to make an effective cleaning agent.

Place the jewelry in the liquid for 15-20 minutes and then polish it with a flannel.

Citric acid solution

Pour a small amount of granules into water, stir thoroughly and place the necessary items in the container with the product. After 5-7 minutes, remove the jewelry from the solution, rinse under running water, then dry and polish.

Remember that if there are chrysolites on the products, this method cannot be used, you will destroy the stones.

Table vinegar 3%

This product successfully copes with various types of stains, including those on jewelry. To clean gold at home, soak a cotton swab in vinegar and wipe the problem areas until the item returns to its original appearance. Afterwards, wash the item in running water and wipe dry.

Please note that you cannot soak jewelry in the solution, and it is also prohibited to use essence instead of vinegar. In addition, this substance should not be used when cleaning chrysolites, which cannot withstand the effects of acids.

Onion

Squeeze the juice from the onion, soak a cotton sponge in this liquid and clean off any dirt on the product. After this, wash the jewelry in warm water and polish it with a piece of flannel or woolen cloth.

Lipstick

This method is somewhat unusual, but the reviews about it are positive. You will need to apply a small amount of this cosmetic to your ring or bracelet and then thoroughly polish the metal and stone.

If your jewelry is very dirty, or you are simply not confident in your abilities and are afraid of ruining an expensive item. It is better not to try to save money and seek professional help.

How to care for gold jewelry with stones

Jewelry is something that is bought for more than one year. They often serve as family heirlooms and are passed on from generation to generation.

So, what should you do to prevent your jewelry from deteriorating and your stones from becoming dull several years after purchase? Follow these guidelines for caring for your jewelry:

• If you wear jewelry regularly, clean it at least every 4-5 weeks.
• Clean stones that decorate earrings or a ring with a cotton swab. If there are greasy stains on it, use cologne as a cleanser and then polish the product.
• If the jewelry is not smooth and there are many “hard-to-reach places” on its surface, clean these areas of dirt with glycerin applied to a cotton swab.
• Large stones can be cleaned with match ash. Light a match and immediately blow out the fire, and use the resulting ash as a cleaning agent.
• For items with glued stones, cleaning methods that involve keeping the jewelry in liquids for a long time are not suitable. In such cases, use soft cloths soaked in a weak soap solution.

When preparing a soap solution, do not use the household, alkaline version. This will result in loss of shine. Better take toilet soap or shampoo.

• If you cannot determine what kind of stone your product is decorated with, and you need to clean it, use alcohol. This product is suitable for all types of stones; you just need to soak the jewelry in the liquid and then polish it with a soft cloth.
• When using powdered products, such as salt or soda, do not use them in their “pure” form, but dissolve them in water. Abrasive substances cause scratches on metal and stones.
• To add shine to gold, soak the jewelry for 30 minutes in a sugar solution (2 teaspoons of sand per 200 ml of warm water), then dry and rub with a soft cloth until shiny.

Jewelry should be stored in boxes or fabric bags and protected from direct sunlight. By following these recommendations, you will keep your “gold reserves” in their original form for many years.

Source: https://hoznauka.ru/veshhi/dragotsennosti/kak-pochistit-zoloto-s-kamnyami.html

Effective methods

To clean your favorite gold items from dirt and make them shine with the same power, you can use the following tips:

1. The easiest way is to use a special composition for cleaning jewelry. The main thing here is to follow the included instructions.

2. Pour wine vinegar into a plastic or glass container. Dip a washcloth or small brush into it and clean the earrings.

3. Place dense material folded several times into a small fireproof container. Place the gold item on it, add water, add a teaspoon of liquid soap and soda, then boil for 10-15 minutes, and at the end of the procedure, rinse the item.

4. Prepare a solution from equal amounts of ammonia and hydrogen peroxide, place earrings in it and keep for 60 minutes under a closed lid. At the end of the specified period, rinse with water and wipe with flannel.

5. Pour a little shampoo into warm water, place the earrings there and leave for 30-40 minutes. After this, take out the earrings, clean them with a small brush and rinse with cold water.

Additional Information

Here are some more recommendations that will help restore the original appearance of your favorite earrings:

1. Drop 5-6 drops of ammonia and a little soap into the water, put the earrings in the resulting solution and keep it in it for an hour. Contamination in various bends is eliminated with a cotton swab with the prepared product applied to it.

2. You can clean gold earrings with a cotton swab by scooping up lipstick with it.

3. You can use tooth powder as a cleaning agent, but without a toothbrush.

4. For heavily soiled earrings, you can use a product prepared from water slightly above room temperature, half a tablespoon of laundry detergent, 10 ml of ammonia and 10 ml of hydrogen peroxide. Mix all this well, pour into a glass container, put the gold item there, close tightly and hold for 5 minutes, shake, remove the earrings and hold under warm water.

Any of the tips listed above will make your gold earrings shine again.

Source: http://kupidonchik.org/kak-pochistit-zolotyie-sergi/

፠ How to clean gold earrings at home?

All gold jewelry needs cleaning. And gold earrings are no exception. They may develop a coating of dust, which gets clogged in small joints and can also accumulate under stones. Then they lose their shine and no longer look as great as they did immediately after purchase.

There are several ways to clean gold earrings, which will be discussed below. You don’t have to make any special efforts, and in order to clean the earrings you will need available materials that are found in every home.

What you will need:

1. soft flannel fabric;
2. washing solution - dishwashing liquid is found in every home;
3. ammonia solution - for heavily soiled gold jewelry and to make the metal shine;
4. dentifrice;
5. a soft old toothbrush;
6. other ingredients according to the chosen recipe.

And let's start with the simplest method - cleaning gold with soapy water . Warm water and the most common dishwashing solution. Place the earrings in it for an hour, then rinse with warm water and wipe with a flannel.

What does it give? You will clear the surface of dust and dirt, but if your earrings have stones in them, then there is a high probability that you will not be able to remove the dirt underneath them.

Ammonia or ammonia solution

Dissolve a few drops of ammonia in warm water. Place the gold earrings for an hour, rinse, and wipe with a flannel.

What does it give? The gold will acquire a bright glossy shine. But again, this method will not clear the gold under the stones.

https://www.youtube.com/watch?v=H4y4KIX5zHw

Ammonia solution has an unpleasant odor, so you can easily replace it with vinegar. When cleaning with a vinegar and ammonia solution, it is important to know that this method is not suitable for precious or semi-precious stones. Vinegar can cause the surface of the stone to become cloudy. It will simply stop shining.

It is better to clean diamond earrings in a special workshop from a good jeweler.

Removing dirt with a toothbrush

Gold is a soft metal and is susceptible to surface damage. Therefore, if you decide to use mechanical cleaning, then choose a very soft toothbrush .

The first option for mechanical cleaning is a special paste for cleaning gold. It is commercially available and is suitable not only for gold earrings, but also for rings, necklaces and other items.  

But, if you don’t have it on hand, you can use baby tooth powder to clean gold earrings with a stone. It will gently dissolve and will not damage the gold, carefully removing the plaque. After cleaning, rinse with warm running water and wipe with a flannel. You can also use a piece of velvet, a napkin for glasses, or other fabric that will not leave lint on the gold.

Products with stones or matte gold

If the stones are not attached with special tendrils, then they are set with glue. Such gold earrings should not be soaked in water for a long time. They can be carefully washed with soapy water and running water, and then wiped with alcohol.

Stones are a separate big topic. The best way to clean and not damage their surface is to wipe with alcohol . In this case, we mean pure medical alcohol without dyes. At worst, you can use regular vodka. The main thing is that you should not use cotton wool for wiping gold earrings with stones. Its fibers easily get stuck under the fasteners, and it will take a lot of effort to pull them out.

We do not immerse earrings made of matte gold with stones in water, but only wipe them with a napkin moistened with a solution of ammonia. Matte and white gold cannot be cleaned with Goya paste or tooth powder. The surface of this metal is easily scratched and is softer than ordinary gold.

2019-03-15 09:43:06

1827

Source: https://xn----mtbechcrdba9adf6a.com/news/kak-pochistit-zolotye-serezhki-v-domashnih-usloviyah.htm

How to clean gold earrings with stones at home: tips with video

:

1. General recommendations
2. Cleaning Rules
3. Home Remedies
4. Rules of care

Jewelry looks beautiful and elegant, but over time it loses its shine, becomes covered with a greasy film and is subject to other contaminants. To restore purity and shine to your products, it is important to know how to clean gold earrings with stones, chains, bracelets, etc.

Every housewife can cope with the task without leaving home, the main thing is to choose the right cleaning method and means.

Gold earrings with precious or semi-precious stones require special care. To maintain the shine and cleanliness of your jewelry, clean it periodically using home or professional products.

The article contains popular and effective methods that will help restore shine, radiance and purity to precious metals and minerals.

Read this article about cleaning silver earrings.

General recommendations

In order to quickly clean gold earrings with stones at home, follow the basic rules and recommendations:

• do not use aggressive chemicals for cleaning to avoid clouding the crystal and darkening the metal;
• do not use hard brushes, rough sponges or products with abrasive particles, otherwise you will get scratches that spoil the aesthetic appearance of rings, earrings and chains;
• if possible, use special compounds that are designed for cleaning gold items;
• You should not clean items made of white or yellow gold with laundry soap, as it leads to darkening and clouding of the metal;
• When choosing a cleaning product, consider the nature of the stone and its density.

Do not use the boiling or soaking method for products with glued stones. The glue will become soggy in water and the decorative element will be easy to lose.

Jewelry with hard stones

Precious stones differ in density and according to this criterion they are classified into hard and soft. Depending on the hardness, you should choose the method of cleaning them.

Hard ones include: emerald, ruby, topaz, diamond, peridot, garnet, sapphire, zirconium . To clean such jewelry, use one of the following methods:

1. Stir 1 tbsp in 75 ml of water. l. ammonia and dip the earrings into the solution. After 10-20 minutes, wash the product under running water and wipe with a soft cloth.
2. A regular soap solution will help remove light stains. Dissolve a small amount of soap in warm water. Soak the jewelry for a couple of minutes, and then treat it with a soft brush, removing dirt from hard-to-reach places.
3. Ash will help restore shine and shine to stones - burn a match and rub the product with burnt wood. You can also simply wipe the jewelry with hydrogen peroxide for this purpose.
4. Gasoline will help remove greasy and greasy stains. Soak a cotton pad in the flammable substance and wipe all surfaces with it.

To clean some types of stones, you can only use professional products with a special composition. You can buy them and familiarize yourself with the rules of application in a jewelry store or workshop.

Jewelry with soft stones

Soft stones ( opal, amber, turquoise, coral, pearls, malachite, etc.) require a special approach and a more careful selection of cleaning products and processing methods. Do not use tooth powder.

To clean items with stones, use soft cloths with special impregnation. They carefully and effectively remove dirt, add shine to metals and shine to minerals. At the same time, they do not damage the surface and do not lead to darkening of the gold or clouding of the stone.

You can clean and polish gold items using special impregnated wipes or a soft cloth.

To clean turquoise or coral, use alcohol. Soak a cotton pad in the liquid and rub the earrings well with it. To clean soft stones, do not use ammonia - it will cause them to become cloudy and lose their presentable appearance.

You can wash your jewelry using soapy water and a soft cloth. Do not soak the items, but simply wipe them well, then rinse and wipe dry.

Do not use citric acid to clean pearl-encrusted earrings. It will corrode the stone and irreversibly damage the jewelry.

Home Remedies

Available folk remedies will help clean dirty gold earrings from fat deposits and other contaminants:

1. Grate peeled onion Squeeze the raw material through cheesecloth to obtain pure juice. Soak the jewelry in the onion liquid for 10 minutes and then brush with a soft-bristled brush.
2. Sugar will help give products shine and shine . Dissolve granulated sugar in a small amount of water and soak the jewelry in the sweet syrup overnight. You can use baking soda in a similar way.
3. egg white and beer in equal proportions . Beat the ingredients well with a fork. Soak a flannel cloth in the resulting mixture and wipe the gold earrings with it.

To keep gold jewelry shiny and looking like new, after each cleaning, wipe it dry and rub it well with velvet.

To clean gold earrings with stones, use a special paste. To prepare it, mix Vaseline, grated soap, chalk and a little water . The result should be a creamy consistency.

Apply the resulting paste in an even layer to the decoration and leave for 1.5-2 hours. After the allotted time, rinse the earrings under running water and wipe dry.

Rules of care

To make your gold earrings look beautiful and shine, provide them with proper care:

1. Once a month, be sure to carry out preventive cleaning, especially if you wear the product without taking it off. It is much easier to remove fresh and small stains than old greasy marks and dirt.
2. For cleaning, you can use glycerin - soak a cotton swab in the liquid and thoroughly treat all the hidden corners of the decoration with it.
3. To give your gold item shine and shine, wipe it with an alcohol-based product.
4. Avoid prolonged exposure of gold to direct sunlight. Protect it from sudden temperature changes and high humidity.
5. After cleaning, polish the item with velvet or soft suede.

If you are afraid of damaging or ruining your precious jewelry, entrust such a delicate process to a jeweler

You can clean your earrings at home using improvised or professional products. Preventative cleaning will preserve the shine and decent appearance of the product for many years. You will find even more tips on cleaning various gold jewelry in our other article.

Various means and methods are used to clean gold earrings. To find out how to use them correctly and which of them are the most effective, watch the following videos:

About the author: Marina Nabilskaya

Young mother, wife and part-time freelancer. Being a lawyer by training, I am accustomed to collecting and providing the most complete and reliable information. Constantly improves in the professional field and strives for personal growth and development.

Found a mistake? Select the text with the mouse and click:

Do you know that:

The easiest way to remove scale and carbon deposits from the soleplate of the iron is with table salt. Pour a thick layer of salt onto the paper, heat the iron to maximum and run the iron over the salt bed several times, applying light pressure.

If your favorite things show the first signs of gestation in the form of untidy pellets, you can get rid of them using a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to their proper appearance.

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from neighbors above.

The habit of using an automatic washing machine “sparingly” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.

Fresh lemon is not only suitable for tea: clean dirt from the surface of an acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt can simply be wiped off with a sponge.

Threads made of gold and silver, which were used to embroider clothes in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the required fineness. This is where the expression “to drag out the rigmarole” came from - “to do long, monotonous work” or “to delay the completion of a task.”

The dishwasher cleans more than just plates and cups. You can load it with plastic toys, glass lamp shades and even dirty vegetables, such as potatoes, but only without using detergents.

There are special traps to combat moths. The sticky layer with which they are covered contains female pheromones that attract males. By sticking to the trap, they are eliminated from the reproduction process, which leads to a decrease in the moth population.

Before removing various stains from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the item from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

Source: https://hozpedia.ru/kak-pochistit-zolotye-sergi-s-kamnjami.html

How to clean white gold at home? — The second life of your jewelry

Knowing how to clean white gold will help you quickly restore the shine to your favorite jewelry without spoiling its thin, fragile outer coating.

:

Determining the scale of the problem

Before you begin the cleaning procedure, it is worth identifying the cause of the contamination. This will help you quickly choose the most effective cleaning method.

• If your favorite ring gets dirty and sticky, there is a huge choice of cleaning methods. The main thing is to carry out all manipulations as carefully as possible, do not use abrasive cleaning products.
• If the white surface turns yellow, the situation is worse. Yellow color is a signal that the rhodium plating has worn off. Only a master jeweler can correct the situation.
• The jewel turned black. Polishing can eliminate this drawback. It is also better to entrust this procedure to an experienced craftsman in a jewelry workshop.

What is the difficulty of care?

Cleaning objects made of this noble metal requires special care and precision. The thing is that the white surface is nothing more than yellow gold coated with a thin layer of rhodium.

It is what enhances the noble pearl shade, shine, and makes your favorite piece of jewelry more durable.

Despite all the positive aspects, it is worth remembering the rule that the rhodium layer wears off very quickly. Such products are cleaned only as a last resort if they have lost their original shine, become sticky, or changed shade.

If you know a jewelry maker, entrust this work to him. An experienced specialist knows how to handle such things so as not to damage the thin rhodium layer.

If you don't have a jeweler, you'll have to do the cleaning yourself. The main thing is to be careful and not to rush, and clear instructions on how to do this will help. So, let's begin.

How to clean gold at home

• Like any hard surface, gold is very convenient to clean with toothpaste. It will perfectly remove dirt and polish the top layer.

Attention: the paste for cleaning this type of noble metal must have a soft, gel structure, without abrasive particles. You should also give up brushes. It is better to give preference to a soft cloth.

• Prepare a mixture of ammonia and water (1:1 ratio). After placing your favorite trinkets in this liquid, leave it there for at least thirty minutes. Then wash them and place them on a towel to dry.
• Baking soda will help remove dirt very quickly. It must be used in the following way. Pour water into a small bowl and boil it. Add a spoonful of baking soda to boiling water and place your favorite ring, earrings or chain in it. After just fifteen minutes, the product should be taken out and washed.

Under no circumstances should you rub the pearly white layer with dry baking soda powder.

• Regular laundry soap will also help remove dirt. It is grated on a fine grater and mixed with liquid to form a paste-like slurry. The gold jewelry is placed in the resulting mixture and left for sixty minutes. Afterwards it is taken out, washed and dried.
• If the contamination is not significant, sugar water will help restore its beauty. To prepare it, mix water (200 ml) and sugar (dessert spoon). The gold item is dipped into the prepared solution for at least an hour.
• Mix a spoonful of dishwashing detergent and half a liter of water in a single container. The liquid should be allowed to boil a little, after which the jewelry is placed in it.
• In a similar way, use a mixture of liquid soap, hydrogen peroxide, ammonia, and water. All ingredients are mixed at the rate of 200 ml of liquid and a teaspoon of all other components. The immersion time required to remove contamination is thirty minutes.
• Table salt mixed with liquid will quickly clean your ring.

Attention: if all of the above methods do not help, you can look for a special paste for cleaning jewelry in the store (or from a jeweler you know). It will definitely cope with any contamination.

How to properly clean gemstone jewelry

Dirt deposits not only settle on the gold surface, but also become firmly lodged between the precious stones. Cleaning out such dirt is a difficult task and requires patience, as well as certain skills.

When working with precious metals, do not use sharp, hard objects. They easily scratch the setting of stones.

The following information will also be helpful:

• Do not rub the stones unless they are secured. Otherwise, there is a risk that the gem will simply fall off;
• Never clean stones with powder or abrasive paste. Regular gasoline can easily remove complex contaminants;
• If the stone has a hardness level below 5, it can only be cleaned using a soap solution.

Low hardness stones include turquoise, apatite, malachite, and moonstone.

A few traditional methods

There are several rather unusual, but as practice has shown, effective methods of cleaning precious metal. Here are some of them:

• Regular women's lipstick will help clean gold jewelry. The thing is that it contains titanium dioxide, which copes well with any contamination. Recommendation: apply lipstick not to the jewelry, but to a cotton pad, which is used to wipe the contaminated areas;
• Onions are useful not only in the kitchen, but also when peeling gold. It is rubbed, and the resulting gruel is used to wipe the contaminated areas;
• Another non-standard method of cleaning using lime. It is thoroughly ground in a porcelain bowl, gradually adding water. The result should be a mass reminiscent of sour cream. Then add a little salt and soda. The resulting mixture is left to brew for several days, after which you can begin to work. The products are placed in the prepared mixture and left in this form for several hours. In just two hours, your favorite rings, earrings, and chains will shine like new.

A few tips and cautions

As practice has shown, it is not so difficult to clean gold with your own hands. But to make the work go quickly, it’s worth remembering some secrets:

• When cleaning gold jewelry with your own hands, you should not use abrasive products: powders, gels and fabrics with hard particles.

When choosing a brush for working with precious metals and stones, give preference to options with soft bristles.

• When polishing the golden layer, do not use liquids containing chlorine. Special products will help soften hard chlorinated water.
• Before you begin the cleaning procedure, it is important to check your jewelry for damage to the clasp and other important connections. Pay attention to loose stones, damaged pendants, check clasps and hooks. There is a risk that when cleaning a damaged product, you may lose some of its parts.
• After the process is completed, the jewelry must be thoroughly rinsed under clean running water (preferably distilled) and then dried and polished with a soft microfiber cloth.

Is it possible to restore scratched and tarnished gold?

Has your favorite ring lost its shine or has unsightly scratches appeared on it? A master jeweler can solve this problem by using the method of polishing the rhodium coating.

This process is delicate, requiring experience and utmost attention. You should not polish it yourself, so as not to completely ruin your favorite item. Trust the professionals.

Knowing how to clean this noble metal at home will help not only quickly restore your jewelry to its original shine, but also protect it from scratches and other damage.

How to properly store the product

You can preserve the original appearance of the jewelry by following simple storage rules:

1. Before hiding treasures from prying eyes, pack it in a separate box.
2. Keep rings and earrings away from acid and chlorine. This means that before visiting the pool (the water in it is highly chlorinated), while washing dishes and other cleaning around the house, it is better to remove jewelry.
3. Even with very careful handling of jewelry, over time you begin to notice that the top layer wears off. Important: such jewelry must be worn extremely carefully, avoiding mechanical damage and active friction. When the top layer begins to turn yellow, it must be taken to a jeweler for galvanic treatment.

The gold surface cannot come into contact with other metals for a long time. This can cause it to change its color.

By following all the rules and recommendations of specialists in cleaning white gold jewelry, your rings, earrings and chains will last for decades, while maintaining their original appearance.

Source: https://bleskk.com/chem-chistit-beloe-zoloto/

How to clean gold

Jewelry lovers often face the problem of cleaning their favorite accessories. Even gold earrings, rings, and chains lose their luster from constant wear, change color, and acquire small scratches. This happens because they contain an alloy of zinc, copper, nickel, silver and other metals that react with water and air.

Is it possible to clean gold at home?

Wealthy people who have a lot of jewelry in their jewelry boxes often take their favorite earrings or bracelets to the jeweler for cleaning for a while. For those who have one wedding ring on their finger, this is not so appropriate. So they are interested in how to clean gold at home, what materials are needed for this, and what the result is. It must be said right away that the effect is different.

Cleaning gold at home is an economical option, but not all items can be cleaned well without special jewelry tools. Jewelry with an openwork pattern, a convex pattern, or a concave shape with many irregularities is difficult to bring to perfect condition even with the help of a toothbrush. It is also difficult to care for products with precious and semi-precious stones. Simple rings, bracelets, earrings without numerous irregularities are easy to clean yourself.

How to clean gold at home

This question is of interest to most of those who want to use the means at hand without buying anything. They are attracted to folk remedies such as baking soda, dish detergent, toothpaste, lipstick, onion, and vinegar.

Yes, you can wipe the products with these substances, even some result will be visible (not for long). Chemicals are used much more often. After all, how to clean gold at home, if not with ammonia or borax solution, many people think.

Products with stones require careful wiping with cologne, alcohol, even gasoline.

How to clean gold

Why can it happen that even expensive jewelry can darken (blacken) over time, you figured it out. Now let’s talk about how to clean gold at home and how to do it without harming the product itself. Many people even decide to use washing powder (not liquid) to get their jewelry in order, but here we suggest considering the most common options.

Ammonia

This method is considered perhaps the simplest and most frequently used. To prepare the cleaning mixture, you need pharmaceutical ammonia (a teaspoon), boiled hot water (a glass), washing powder or dishwashing detergent (a tablespoon).

All these components are mixed until the last ingredient is completely dissolved. Next, the product is lowered into a container with the prepared liquid; the waiting time is 2 hours. After decorating, rinse under warm water and wipe with a dry, soft cloth.

Hydrogen peroxide

Many people are interested in how to clean gold with ammonia with the addition of peroxide, because they have heard that the effect is very good. Preparing the mixture is very simple. Yes, it really is that effective: gold will shine like new with this product. It's all about the reaction that occurs when ammonia combines with peroxide. These products can fight not only simple impurities (sebum, dust, traces of cosmetics), but even oxide. Cleaning proceeds as follows:

• pour a glass of water into an enamel bowl or pan;
• then three teaspoons of ammonia are sent there;
• 2 tbsp. spoons of hydrogen peroxide;
• a little regular liquid hand soap;
• The gold jewelry is left in this container for several hours, then thoroughly washed and wiped.

Vinegar

Table vinegar (for adding to food) can be used to clean gold jewelry. It is mixed with onion juice in equal proportions, applied to a soft cloth and wiped over the product. This method helps to get rid of minor dirt and restore its original appearance. It makes sense to use such cleaning for preventive purposes. If iodine stains appear on the jewelry, hyposulfite liquid (sold in a specialized store for amateur photographers) can remove them.

How to clean gold jewelry at home

Each gold product has its own characteristics, this must be taken into account when cleaning. If you use one method on all your jewelry, you may simply ruin some of it. Before cleaning white gold (or any kind) at home, you should take the choice of method seriously. The thing is that different jewelry not only has its own individual composition, but is also made in a certain style. Find out how to clean a gold chain, and how to clean earrings and rings without harming their condition.

Chain

The peculiarity and main difference of the chain is that it consists of small links connected to each other in a certain way. Dirt gets packed very well between such small parts, but it is difficult to get out.

Careless cleaning often leads to the product breaking on one of the links. To prevent this, you should know how to properly handle the chain when cleaning.

It's simple: just put it in a solution of ammonia with peroxide (recipe above) for half an hour, then hang it in there, take it out. Next, all you have to do is rinse under running water and enjoy the result.

Ring

Women's rings are distinguished by ornate patterns, the presence of small and large stones, and other concave or convex details. Such products are more likely to become contaminated. The engagement ring loses its shine over time, but there is nowhere for dirt to accumulate.

It is cleaned with toothpaste using a soft old brush. But this method should not be used for intricate decorations. The patterns on the ring will be cleaned, but they will wear out and will no longer look so attractive.

Therefore, the best method is to leave the gold in soapy water or ammonia solution for a while, then wipe it gently.

Earrings

How to clean gold if it's earrings is a pressing question. Not only dust and sebum, but also many cosmetics become clogged in small parts. The problem is that earrings consist of small connected parts, and they are often decorated with stones.

The fastener is wiped with ammonia solution, soapy water, even toothpaste. In the part with the stone, cleaning is allowed only with a cotton swab moistened with alcohol or another suitable liquid. This only applies to those products in which precious “details” are glued to the jewelry.

How to clean gold jewelry with stones

You should clean gold with pearls, diamonds, and other precious and semi-precious stones very carefully. To prevent glued parts from falling off, do not wet the product with water or solutions. If the stone is well secured (with golden “paws”), you can not be afraid of such an unpleasant surprise and calmly clean it. There is one more important point. Each type of stone is special and therefore requires an individual approach. If you have a product with:

• turquoise, it cannot be wetted. Cleaning is carried out with a professional paste or by the jeweler himself.
• pearls, they should be washed in soapy water and then gently wiped.
• Swarovski crystals, it is also not recommended to wet it. You should wipe it with a special napkin, velvet, felt.
• quartz, diamonds, diamonds, topazes (hard stones), you can clean such jewelry with ammonia, a toothbrush and other possible methods. It is still not recommended to use sharp objects.

How to wash gold

It's worth thinking about more than just how to clean your gold at home. It is possible that it just needs a simple wash. Only after this procedure will you be able to find out whether the product requires stronger agents.

In order to wash gold, heat water (up to 50 degrees), pour in soap, shampoo, detergent (of your choice). The gold is completely immersed in the liquid for 2 hours. At the end of this time, the products are rinsed, cleaned and wiped with a soft brush.

If your jewelry is shiny and pristine again, no more serious cleaning is needed.

532

Was this article helpful?

Yes

No

0 people responded

Thanks for your feedback!

people answered

Something went wrong and your vote was not counted.

Found an error in the text?

Select it, press Ctrl + Enter and we will fix everything!

Source: https://sovets24.ru/532-kak-pochistit-zoloto.html

How to properly clean gold earrings at home

671
Reading time: 4 min.

Gold pleases us with its durability and beauty. It comes in different colors - yellow, red, pink, white. All types require care and regular cleaning, otherwise the gold will look like a cheap, oxidized metal.

Gold earrings with stones are especially good. They frame our face and complement the image, making it more feminine and elegant. But not everyone knows how to properly care for and how to clean gold. They are afraid of scratching or spoiling the stone, and besides, earrings with stones have more nuances regarding cleaning. Contaminants get on the inside of the stone and in the narrow bends of the fastening.

How to clean gold earrings

The earrings are all different, there are models with and without stones, in yellow and white gold, with fixed stones and with glued ones, studs and pendants. And the methods for cleaning them will differ.

IMPORTANT! Not all earrings can be cleaned at home to perfect condition. Convex patterns, openwork patterns and other irregularities require special jewelry tools.

People have come up with dozens of recipes, some effective and safe, others not suitable for every decoration. And jewelry stores have long been selling a special cleaning product for gold that can be used at home. You can take them to a workshop, where an experienced master will clean them. But both methods have a disadvantage - you have to pay for them. In addition, you need to not only know how to clean earrings, but also how to properly care for them.

Gold Care Basics

To reduce the need for dry cleaning, you need to properly care for your earrings. By following the operating rules, you will extend the life of the product, and you will have to clean it less often.

Rules of care:

• remove earrings before swimming, especially if they have stones. Remaining foam will get into narrow parts and bends and will accumulate there, creating a plaque. Once on the stone, the foam will settle as a coating on its back, and when the stone has accumulated, it will no longer shine without careful cleaning;
• Wipe the areas in contact with the skin with alcohol every day, especially the pin. While wearing them, sweat and cosmetics get on them, which leave plaque and a favorable environment for the growth of bacteria;

IMPORTANT! Do not wipe gold with nail polish remover, otherwise it may darken.

• In the bathhouse and solarium, remove earrings and other jewelry. This has less to do with their cleanliness than it does with your safety;
• Wipe gold only with soft fabrics - flannel, suede, velvet. Hard fabrics may scratch it;
• Clean your gold regularly. Accumulated dirt and dark deposits spoil the appearance of jewelry. It’s worse when bacteria develop in the dirt and cause inflammation upon contact with the body;
• Do not wet earrings with glued stones, they may get lost.

IMPORTANT! The white gold alloy contains nickel and copper; the products are coated with rhodium, which causes the surface to quickly wear off. Do not use abrasive powder, brush or hard cloth for cleaning.

A couple of cleaning recipes

ADVICE! Hyposulfite pharmaceutical liquid will remove iodine stains.

Soap solution

Soapy water is used to wash gold rather than clean it. Try this method, you may not need further cleaning:

1. Mix water and soap.
2. Heat the mixture to 50-60 degrees.
3. Place the earrings there and leave for 2 hours.
4. Rinse and brush with a soft brush, or an old toothbrush.
5. Wipe with a napkin.

If the earrings are updated, the job is done. The contaminants remain - proceed to more serious methods.

Hydrogen peroxide, ammonia

In addition to peroxide, you will need ammonia, water and soap. The solution cleans products from stubborn dirt due to the reaction of the main components. So let's get started:

1. Pour 200-250 ml of water into a container. Use enamel cookware to prevent it from reacting with the cleaning agent.
2. Mix it with 3 teaspoons of ammonia + 2 tbsp. spoons of peroxide + a couple of drops of soap.
3. Place the earrings in the solution and wait 60-120 minutes. During this time, all reactions will pass.
4. Rinse and dry.

Tooth powder, paste

This is a good alternative to products where abrasive particles scratch gold. Tooth powder gently cleanses and serves as a replacement for jewelry paste. Ideal for White Gold with Diamonds:

1. Add water to 3-4 tablespoons of tooth powder to form a paste.
2. Apply the paste to a soft brush or cotton pad and clean the earring.
3. Rinse and wipe dry.

Features of cleaning products with stones

The fastening of stones varies, and so do the stones. It can be secured in a foot or other metal fasteners, or maybe glued. Jewelry workshops use a special glue that holds the stone firmly, but you still need to be careful. We don't know what kind of jewelry glue was used, so harsh cleaning products may dissolve it.

There are nuances with stone in a metal fastening. It may become cloudy when cleaning as described above. Therefore, soak a cotton swab in the cleaning product and use it to treat the earrings with stones. You can take a piece of cotton wool, a cotton pad or a soft cloth, but a stick is more convenient.

IMPORTANT! If your earrings have stones, do not clean them with vinegar. The stone may become cloudy. Replace it with onion juice, it will help clean the jewelry and will not spoil the shine of the stone.

Soak the stick in the product and wipe the earring. Pay special attention to the area behind the stone - dirt and remnants of soap, shower gel or shampoo accumulate there if you do not remove the jewelry while bathing. Carefully wipe the part that is inserted into the earlobe - sweat and sebum accumulate there. If you don't clean this area regularly, your ears will respond with inflammation and pain.

The product and the cleaning itself also depend on the stone:

• Turquoise cannot be wetted or cleaned using traditional methods. Buy jewelry cleaning paste or take it to a workshop;
• wash pearls with soapy water and wipe with a soft cloth;
• Swarovski crystals - do not get them wet, wipe with suede, felt or flannel cloth;
• Clean hard stones - diamond, quartz, topaz with ammonia and a soft bristle brush.

ADVICE! If the product has thin curves where a cotton swab cannot reach or the stone is very small, wrap a thin layer of cotton wool around a toothpick. This way you will clean the dirt and you won’t have to resort to hard brushes.

Subscribe to our Social networks

Did you like it?

Source: https://tkaner.com/aksessuary/sergi/kak-pochistit-zolotye-sergi/

How to clean gold with diamonds: 15 best home remedies

It is difficult to find a woman who is indifferent to expensive jewelry, does not dream of new earrings with precious stones, and does not rejoice at a ring with a pearl or diamonds. To make your jewelry shine as before, you don’t have to go to a workshop; you can clean your gold at home and restore your diamonds’ elegance and shine. Plaque is removed using special compounds and products that housewives always have at hand.

 Main causes of pollution

Other metals are added to the gold used to make jewelry to make the jewelry harder and not deform. Although the precious mineral gains strength, it darkens over time, neither silver nor copper protects it from wear and tear.

Gold becomes dull and less shiny as it touches the skin, which produces sweat. Dust settles on rings and earrings; cosmetics, ointments, and lotions leave traces. Products come into contact with fat produced by the sebaceous glands and get dirty when cleaning the apartment or weeding flowers. Sun rays, high temperature, and hot water have a negative effect on gold and deteriorate the appearance of diamonds.

Precautionary measures

To prevent jewelry from darkening and gemstones from looking like simple pieces of glass, you should not wear jewelry in hot weather, or wear it to the beach, pool or sauna. You need to remove the rings when washing and washing your hands with hot water.

At least once every 6 months to a year, earrings or rings with diamonds should be taken to a workshop, where the jeweler will clean the plaque using ultrasound, adjust the stones, and disguise scratches.

It is impossible to do this on your own without special tools.

Preparatory work

Precious metal oxidizes in air upon contact with water. Plaque formed on a gold product worsens its appearance, sometimes provokes inflammation of the skin, and causes allergies. If you decide to clean your jewelry yourself, you need to:

1. Wear gloves for work.
2. Select a container that will completely fit the item.
3. Prepare the composition.

Do not soak gold in an acid or alkaline solution, allow it to interact with abrasive materials, aggressive substances, heat it to high temperatures, or keep it in hot water.

What kind of soap can I use?

Oil released from the sebaceous glands of the skin forms an oily coating on gold and diamonds. Dust settles on the surface and the object begins to darken. The wedding ring is wiped with soda, but the abrasive material scratches the precious stone on the ring, and boiling water changes color. The soap is gentle, removes plaque from pearls and coral, topaz and diamonds, and leaves no marks on gold.

Children's

To restore shine to jewelry or remove stains on earrings or a pendant, heat water, fill a bowl with it, add a little baby soap, and whisk into foam. Gold items are dipped into the solution, wiped with a soft brush, after an hour, removed from the container, rinsed and placed on a napkin.

Dermatological

This type of soap consists of synthetic substances that have antibacterial properties. The detergent produces a small amount of foam, but disinfects and removes plaque that forms on gold jewelry.

Self made

The jewelry is cleaned of dirt with a paste prepared from water, chalk and grated soap, which is made from olive or castor oil and wax. Rub the stone and gold with the mixture and polish it to a shine with a dry cloth.

Liquid

Jewelry retains its beauty and sophistication when it is cared for regularly. You don’t have to seek help from a professional for a long time if you soak gold objects with an attached stone in a liquid soap that forms a thick foam. The plaque dissolves, and the dirt is easy to wipe off with a soft brush. The product is rinsed and dried with a napkin or cloth.

Cream soap

Rings and signet rings with loose diamond inserts should not be soaked in liquid composition. Such jewelry is cleaned with a special paste or wiped with a swab and soaked in cream soap.

other methods

When choosing a product for caring for gold objects, it is necessary to take into account the properties and structure of the precious stone inserted into the product. You cannot clean jewelry with laundry soap; under the influence of alkali, rings and earrings stop shining. In jewelry stores you can purchase the Aladdin solution, which copes with dirt and plaque on white and yellow gold. Clean and polish jewelry with Talisman paste.

Alcohol and gasoline

It is possible to restore a precious metal item with a diamond to its normal appearance even in the absence of professional means, not only with the help of soap compounds, but also with alcohol, vodka, and cologne. A cotton swab is moistened in any of these products and the plaque is wiped off.

Gold is purified with gasoline. The solvent is applied to a soft brush and the contaminated areas are treated. The chain with links is simply placed in a container filled with ethyl alcohol or vodka.

The items are washed in soapy water, dried with a napkin, and the diamond is wiped with a velvet rag.

Liquid soap and toothpaste

A dull piece of yellow gold jewelry with a stone can be restored to shine by rubbing it with a soft brush and applying powder or squeezing a little toothpaste out of a tube. The treated product is washed in water with liquid soap, rinsed and dried.

Baths

If the cut diamond is firmly fixed in the frame, the yellow gold jewelry is immersed in cleansing compounds that fill the baths:

1. Ammonia is combined with the same amount of water, the product is soaked for a quarter of an hour, and the deposits are removed with a brush.
2. In case of severe contamination, pour 5 g of sodium thiosulfate into a glass of cooled boiling water, place a ring or ring in the solution, wipe the diamond and setting with a soft brush or sponge, and place it in a soapy liquid.
3. Add 8-10 drops of ammonia to 200 ml of water, and leave the decoration for 5-6 hours.

Mix a teaspoon of soda with boiling water, cool the liquid, wipe the stone, but do not clean the metal. After using the bath, the gold is polished with velvet, soaking the fabric in ammonia.

Felt and flannel

Precious metal jewelry darkens when hands are washed with laundry soap that contains alkali. To restore shine by cleaning jewelry from plaque, the surface is polished with a flannel or felt flap.

Ammonia

Ammonia can deal with old stains. It is enough to load the ring into the medicine for a quarter of an hour, and then rinse under the tap. If ammonia is mixed with water, the gold object is left in the solution for 2-3 hours and then placed in a soapy liquid.

Ammonia cleans the metal and does not have a negative effect on the diamond.

Onion

Housewives who cook borscht or soup, prepare main courses and salads know how to remove plaque from their jewelry. The onion needs to be divided into 2 parts, rub the surface of the ring or chain. After 2 hours, the vegetable releases juice, which dissolves deposits and dirt.

To remove a specific odor, the products are rinsed under the tap and dried with a napkin.

Combination of peroxide and alcohol

If gold jewelry is not cleaned for a long time, plaque accumulates on the surface, which is difficult to remove using detergent. A special solution removes old stains. To prepare it, combine together:

• a cup of water;
• 15 ml of ammonia;
• 2 tablespoons of peroxide;
• 5 drops of liquid soap.

Fill a glass container with the composition, immerse the objects for 2 hours. The medications react and soften the deposits.

Hyposulfite and borax solution

To wash off old stains on jewelry, you should buy sodium thiosulfate at the pharmacy. The inexpensive drug is sold in ampoules and cleanses the body of toxins, lead and decay products. A teaspoon of the medicine is added to a glass of water. Place a diamond ring in the solution for 20 minutes and wipe off the plaque inside and out.

Liquid borax washes away contaminants, moisten a cotton swab in the composition and treat the surface of the products, after which the jewelry is rinsed under the tap.

Sweet water

Dissolves rust, removes dried blood Coca-Cola. Soak gold objects in a carbonated drink, rinse under the tap, and dry with a napkin. Sweet water effectively cleans darkened jewelry. The products are immersed in it for at least 3 hours, rinsed thoroughly under the tap so that no sticky composition remains.

How to clean white gold

Jewelry is made from different metals. Very carefully you need to wipe rings, signet rings, chains, earrings with diamond, pearl, and diamond inserts. The rhodium used to coat white gold quickly wears off and the mineral oxidizes. To remove dirt from precious metal jewelry, pour 2 tablespoons of sugar into a glass of water and keep the item in it for at least 12 hours. The composition is washed off under the tap, the metal is dried, and the diamond is polished with velvet or felt.

If you need to wear earrings or a ring for the evening, you can clean the jewelry in a faster way. A glass of water is combined with 20 ml of ammonia, a few drops of shampoo are added, and white gold items are added to the composition for only half an hour.

Products made from this metal are placed in a bag and boiled for a couple of minutes. To restore shine, the item is wiped with colorless lipstick, which contains titanium oxide, which dissolves stains and removes dirt. The cloudy diamond insert is treated with isopropanol.

What not to clean

It is not recommended to wipe white metal products with soda; the substance scratches the surface and reduces shine. Do not wash diamond jewelry with products that contain chlorine. Acetic acid removes plaque, but damages the coating.

Dishwashing liquid contains alkalis that oxidize metal. This household product is not suitable for cleaning white gold. Do not soak jewelry in a solution of potassium permanganate; the substance does not remove dirt. It is better not to rub rings and rings with onions. Vegetable juice contains small amounts of sulfuric acid, which can cause stains.

Tips and tricks

Jewelry with diamond inserts cannot be cleaned with products that contain soda. The substance degrades the shine of gold and can scratch the surface. It is not recommended to wipe metal and stones with iodine; the product does not remove plaque, but changes the shade of the products.

It is not recommended to immerse rings and earrings:

• in alkaline solutions;
• in compositions with chlorine;
• into potassium permanganate.

Jewelry should not be boiled or heated with a hairdryer. Chemicals can damage the stone, and heat can damage the precious metal.

Care and storage rules

To ensure that gold jewelry does not lose its shine and looks elegant and elegant, you do not need to wear it in the heat, to the beach, to the sauna, or to the pool. It is not recommended to wash dishes in rings, since the water supplied to houses and apartments through pipes is chlorinated. White gold items with rhodium should be worn and removed carefully to avoid scratching the surface.

Once every 2 or 3 months, it is necessary to clean items from dirt and plaque; items with inserts of diamonds or other precious stones are advised to be taken to a workshop every six months. It is better to store white gold rings and earrings in a separate box with a velvet backing, rather than with other jewelry, which will protect them from cracks and scratches.

You should wash jewelry not in boiling water, but in warm water, wipe it dry, and do not leave it wet. It is not recommended to clean gold objects and stones with abrasive substances; only old stains should be wiped with ammonia. If you follow the rules of care and storage, jewelry made of precious metal with diamonds or diamonds will not lose their shine and attractive appearance for a long time.

Source: https://hozzi.ru/chistka/zolota-s-brilliantami

How to clean earrings: advice from a jeweler

Gold earrings shimmer so brightly in the sun and you want to preserve this beauty for as long as possible. Maintaining the original appearance of earrings is not easy, especially if the jewelry contains stones. They need to be cleaned periodically and be very careful. How and with what to clean earrings, read about this in our article.

Why should you clean your earrings?

Any earrings are susceptible to contamination. Dust and dirt settle on them, like on any other thing. And gradually the jewelry loses its shine, becomes dull and does not look the way you would like. That is why earrings need to be looked after periodically. This also applies to many pieces of jewelry.

Why do silver earrings darken?

Silver has its own characteristics and can turn black. Many silver jewelry, including earrings, contain copper molecules, which tend to oxidize, as well as amino acids containing sulfur. It is sulfur that causes blackness on silver. Silver easily reacts with sulfur and sulfur compounds, forming black silver sulfides. This plaque is the very darkening of silver

Problems in the body, endocrine system, and increased sweating can also contribute to the blackening of silver earrings.

Is it possible to clean earrings at home?

Almost any earrings can be cleaned at home. In this case, you need to be as careful as possible and follow certain rules. Let's start with the simplest methods that are available to everyone at home.

Wipe the earrings with a cloth. The material with which you will wipe the jewelry should be soft so as not to leave small scratches on the jewelry. This method is suitable for the lightest stains.

Soap solution or shampoo. Dilute the soap solution and leave the earrings for a few minutes, and then wipe thoroughly with a cloth.

These methods are universal, suitable for gold and silver earrings, but still each metal has its own characteristics, including cleaning features.

How to clean silver earrings?

The most famous way to clean silver is with toothpaste or tooth powder. Take a toothbrush and toothpaste and gently clean your earrings. When cleaning, do not rush or use much force to avoid breaking the jewelry.

Ammonia. Dilute ammonia in a ratio of 1 to 1 with plain water and place the earrings in the resulting solution. Depending on the degree of contamination, earrings can be kept in this solution from several minutes to several hours. Then rinse the earrings thoroughly under running water and dry them well.

How to clean gold earrings?

Table vinegar cleans gold very well. Dilute table vinegar with water in proportions of 1 to 1 and rinse (wipe) gold earrings in this solution using a cloth. Then rinse the jewelry in running water and wipe it dry.

Ammonia helps preserve the appearance of not only silver, but also gold, but the method of application is somewhat different. Apply a few drops of ammonia to a cloth and thoroughly wipe the earrings.

But toothpaste and a toothbrush are not very suitable for cleaning gold. There may be minor scratches on the gold.

How to clean stones in earrings?

If the earrings have stones, then long-term cleaning in an aqueous solution may not be suitable. Stones can be attached to earrings not with special metal “claws”, but with a special glue, which can lose its properties after prolonged water procedures.

By the way, any jewelry with stones requires more careful care, and earrings with stones - even more so. Most often, earrings with stones are washed under running water using a cotton swab or cotton pad.

You can clean the stones themselves using alcohol. Apply alcohol to a cotton swab and gently wipe the jewelry, then rinse under running water.

Advice : do not allow temperature changes, that is, do not wash your earrings alternately in hot and cold water.

What is the most effective way to clean earrings?

The most effective way to clean earrings is at a jewelry salon. For example, in jewelry stores they use a special paste, or an ultrasonic bath, or other methods depending on the condition of the earrings. The choice of cleaning method is chosen by the jeweler after examining the jewelry.

Source: https://zoloto55.ru/sovety-yuvelira/kak-pochistit-sergi-iz-zolota-serebra-s-brilliantami-kamnyami