Metal weight calculation
The metal is widely used in various industries. When creating metal structures, it is necessary to first calculate two important indicators: strength and total weight.
The strength of the structure can be calculated using the methods of the theory of strength of materials. Weight is calculated taking into account the following characteristics:
- standard sample density (determined by physical characteristics);
- metal shape (according to the existing assortment - rolled sheets, channel, angle, pipe, etc.);
- geometric shape, part dimensions.
Metal weight calculation
The presence of various forms of metal products requires an individual approach when calculating the following parameters:
- the mass of the entire metal structure;
- required volume of metal.
We calculate the weight of rolled sheets
Calculating the weight of rolled metal is a fairly simple task of this class. Simplicity is determined by the shape of the sample being studied. To begin calculations, you need to know the following characteristics:
- geometric dimensions of the test sample;
- metal density (for steel you can use the average indicator, which is 7850 kg/m3);
The first stage involves calculating the weight of a sheet of metal with an area of one square meter and a thickness of one millimeter. The volume of this sample is calculated and multiplied by the density of the steel. It is obtained by standard multiplication of three geometric parameters: length, width, height.
Multiplying the result by the density, we get a value equal to 7.8 kg/m3. It will allow you to calculate the weight of a sheet of any geometric size and shape. Convenient because it does not depend on length, width, thickness. You can get the final value without resorting to preliminary recalculation.
Therefore, the main task will be to calculate the volume of the selected sheet.
Sheet metal
For example, the weight of a sheet whose size is one meter long, two meters wide, 0.35 mm thick will weigh 5.5 kg. A sheet 5 mm thick, measuring 1.5 m wide and 6 meters long will weigh 353.25 kg.
Before using a metal sheet as a ceiling or building structure, you should evaluate its weight.
Sheet weight
What is a conversion factor?
It allows you to calculate the weight of products made of any material. It is obtained as the ratio of the density of the selected material to the density of steel. Next, to calculate the required parameter, it is enough to calculate such a parameter of a steel product of a given shape. The resulting result will be multiplied by the conversion factor for this material.
The coefficient is a dimensionless quantity. It has its own specific meanings for various metals and alloys. For example, aluminum has 0.34, copper - 1.14, and 1.12 is used for OTS5-5-5 bronze.
To calculate the weight of a sheet made of the specified bronze, it is necessary to obtain the parameter of the same sheet of steel, multiplying with a conversion factor.
Metal conversion factor
The same calculation method, the use of a conversion factor, can be fairly applied to non-metallic rectangular products. For example, to textolite with a coefficient of 0.18, organic glass - 0.15. The results obtained will satisfy the accuracy requirements.
What makes calculating the weight of metal more difficult?
A serious difference in the data obtained for calculating the mass of a steel product is the technology of its production. The difference between cold-rolled metal and hot-rolled metal can be quite significant. We are talking about the accuracy of geometric characteristics while maintaining density along the entire length of the product.
The use of continuous heating and subsequent cooling leads to such negative phenomena as oxidation and recrystallization. The unevenness of these processes causes a change in such a parameter as thickness.
Metal weight
The accuracy of calculations for cold-rolled and hot-rolled metal profiles will differ. The error caused by thickness instability requires obtaining some average value.
How to calculate the mass of a rectangular profile?
A rectangular profile is a parallelepiped with a given wall thickness. The wall thickness is specified in the technical documentation for a specific sample.
Square profile
Mass calculation can be done in two ways. In the first method, the cross-sectional area is calculated: for a sheet of a given thickness. Calculate the mass of a rectangular parallelepiped based on its external dimensions. Then the same calculations are made for a parallelepiped with internal dimensions. The difference between the two values will be the desired characteristic.
In the second method, the weight of one wall of the structure is calculated. If the cross-section is square, multiply by four. If it is rectangular, the sizes of the smaller and larger walls will be calculated separately. Then multiply each value by two and add the results to get the final figure.
Square profile weight
To simplify the process, special tables have been developed.
Determining the weight of a round profile
Round metal products include solid rods, fittings, and pipes of various diameters. The approach to solving the problem remains the same. If the product is solid, it is necessary to calculate the volume, multiply by the density of the material. The volume of metal is calculated using known geometric formulas.
Round profile weight
If the round workpiece is hollow inside, you need to know the wall thickness. Next, you can use one of the methods applicable to calculate the value of rectangular rolled products. The only difference will be the calculated ratios for finding the volume.
How to find out the mass of a hexagonal profile?
Solid metal rods with a hexagonal cross-section are often used. The calculation method for such products remains the same. It is necessary to remember from the school geometry course how the volume of a regular hexagonal parallelepiped is calculated.
The task is greatly simplified if you know the size or number of such a rental. All numbers are given in a standardized table.
The hexagonal profile with the smallest number 10 weighs only 0.68 kg, the largest number 60 weighs 24.5 kg.
Hexagonal profile
The calculations are based on a formula for calculating the volume of a regular hexagonal prism. Having calculated this volume, it is multiplied by the density of the metal. A mass of hexagonal product is obtained.
It should be remembered that the use of simplified methods gives approximate results. They are used for express assessments. When developing design documentation in detail, more accurate indicators are used.
Finding the parameter of a metal pipe of any diameter is carried out similarly to the method for a round profile. Calculate the difference in the areas of two circles. The first has the outer radius of the pipe. The second has the inner radius of the pipe.
The resulting difference is multiplied by the length of the pipe, calculating the volume of metal. Multiplying by the density of steel, the mass of a pipe of a given length is found. Operations with non-ferrous metal products are simplified through the use of a conversion factor.
Pipe weight
When working with ready-made tables, you should find data for a 1 m bar with a radius equal to the outer diameter. Calculate the diameter of the rod, which is equal to the internal diameter. Subtract the smaller value from the larger value to get the desired result. It should be multiplied by the length of the sample.
How to calculate the mass of an angle, channel, I-beam
The parameter is calculated using data on the width of the shelf and the thickness of the metal. The product is considered as half of a rectangular profile.
There are ready-made calculation tables for the entire range of rolled metal products.
However, corners from different manufacturers have real weight characteristics that differ from the tabular data. They deliberately reduce the thickness of the shelf. They are motivated by the desire to reduce the cost of products. The parameter difference differs significantly from the parameters provided by GOST.
Weight of anglesWeight of channelWeight of I-beams
The weight characteristics of the channel and I-beams are determined according to the tables. This is caused by the difficulties of calculating the volume of complex geometric shapes.
Source: https://stankiexpert.ru/spravochnik/materialovedenie/raschet-vesa-metalla.html
Steel sheet assortment
Sheet steel is a type of rolled metal produced by hot rolling in rolling mills. It can be used as an independent metal product and as a rolling stock for cold-rolled sheets, production of bent profiles, and pipes. In its production, carbon unalloyed and alloyed steel grades are used.
Range of hot rolled steel sheets
The range of hot-rolled sheet products is regulated by GOST 19903-2015. In accordance with the standard, rolled products are produced in sheets (thickness 0.4-160 mm) or rolls (thickness up to 25 mm). The width of sheets is 500-4400 mm, rolls are 500-2200 mm. Manufacturing accuracy in thickness - increased and normal. Flatness – especially high, high, increased, normal.
This is the most common and popular type of rolled steel in the national economy. It is used in construction, shipbuilding, bridge construction, automobile and aircraft construction, and in the production of locomotive frames.
Table of sheet assortment and weight of hot-rolled steel in accordance with GOST 19903-2015
| Sheet thickness, mm | Sheet dimensions, m x m | Weight 1 m2, kg | Sheet weight, kg |
| 1,5 | 1.25x2.5 | 11,78 | 36,8 |
| 2,0 | 1.25x2.5 | 15,7 | 49,06 |
| 3,0 | 1.25x2.5 | 23,55 | 73,59 |
| 4,0 | 1.5x6 | 31,4 | 282,6 |
| 5,0 | 1.5x3 | 39,25 | 176,62 |
| 5,0 | 1.5x6 | 39,25 | 353,25 |
| 6,0 | 1.5x6 | 47,1 | 423,9 |
| 8,0 | 1.5x6 | 62,8 | 565,2 |
| 10,0 | 1.5x6 | 78,5 | 706,5 |
| 12,0 | 1.5x6 | 94,2 | 847,8 |
| 14,0 | 1.5x6 | 109,9 | 989,1 |
| 14,0 | 2x6 | 109,9 | 1318,8 |
| 16,0 | 1.5x6 | 125,6 | 1130,4 |
| 16,0 | 2x6 | 125,6 | 1507,2 |
| 18,0 | 2x6 | 141,3 | 1271,7 |
| 20,0 | 2x6 | 157,0 | 1884,0 |
| 22,0 | 2x6 | 172,7 | 2072,4 |
| 25,0 | 2x6 | 196,25 | 2652,0 |
| 30,0 | 2x6 | 235,5 | 2826,0 |
| 32,0 | 2x6 | 251,2 | 3014,4 |
| 36,0 | 2x6 | 282,6 | 3391,2 |
| 40,0 | 2x6 | 314,0 | 3768,0 |
| 50,0 | 2x6 | 392,5 | 4710,0 |
Range of cold rolled steel sheets
The production of these metal products is regulated by GOSTs 19904-90, 9045-93, 16523-97. Thickness – up to 5.0 mm. Width – 500-2350 mm. Manufacturing accuracy in thickness - high, increased, normal. Flatness – especially high, high, improved, normal.
General-purpose products are made from high-quality carbon steels, and for certain applications - from low-alloy or alloy steels. Such products are characterized by high dimensional accuracy and surface quality, as well as a hardened top layer.
To eliminate work hardening and obtain a fine-grained structure in the surface layer, recrystallization annealing is used.
Cold-rolled sheets are used in the production of profiled sheets, in the automotive industry, in the manufacture of dishes coated with enamel, and containers for canned food products.
Table of dimensions and weight of cold rolled steel sheets
| Sheet thickness, mm | Sheet dimensions, m x m | Weight 1 m2, kg | Sheet weight, kg |
| 0,7 | 1.25x2.5 | 5,5 | 17,17 |
| 0,8 | 1.25x2.5 | 6,28 | 19,63 |
| 1,0 | 1.25x2.5 | 7,85 | 24,53 |
| 1,2 | 1.25x2.5 | 9,42 | 29,44 |
| 1,5 | 1.25x2.5 | 11,78 | 36,8 |
| 2,0 | 1.25x2.5 | 15,7 | 49,06 |
| 2,5 | 1.25x2.5 | 19,63 | 61,33 |
| 3,0 | 1.25x2.5 | 23,55 | 73,59 |
Main characteristics of galvanized sheet
Galvanized sheets are produced by applying a zinc layer to cold-rolled coils or sheets, which protects the base metal from corrosive destruction. The most common methods of galvanizing in industrial conditions are hot and electrolytic. The main application of such a sheet is the production of corrugated sheets. It is also used for the manufacture of technological equipment, household appliances, and in the furniture industry.
| Sheet thickness, mm | Weight 1 m2, kg | Sheet thickness, mm | Weight 1 m2, kg |
| 0,45 | 3,73 | 1,2 | 9,62 |
| 0,5 | 4,13 | 1,5 | 11,98 |
| 0,55 | 4,52 | 2,0 | 15,9 |
| 0,7 | 5,7 | 2,5 | 19,83 |
| 0,8 | 6,48 | 3,0 | 23,75 |
| 1,0 | 8,05 |
Galvanized corrugated sheeting: characteristics and areas of application
Profiled sheet is a metal product obtained by profiling cold-rolled galvanized sheets with a thickness of 0.4-1.0 mm on special bending mills. Various grades of this material are used for wall coverings, fencing, and roofing.
Table of sizes and weights of profiled sheets of various brands
| Brand | Thickness, mm | Width, mm | Weight of 1 linear meter, kg |
| C8 | 0,5 | 1150 | 5,4 |
| C8 | 0,55 | 1150 | 5,9 |
| C8 | 0,6 | 1150 | 6,3 |
| C8 | 0,7 | 1150 | 7,4 |
| S21 | 0,55 | 1000 | 5,4 |
| S21 | 0,7 | 1000 | 5,9 |
| S21 | 0,8 | 1000 | 6,3 |
| S21 | 0,9 | 1000 | 7,4 |
| NS35 | 0,5 | 1000 | 5,4 |
| NS35 | 0,55 | 1000 | 5,9 |
| NS35 | 0,7 | 1000 | 6,3 |
| NS35 | 0,8 | 1000 | 7,4 |
| H57 | 0,6 | 750 | 5,6 |
| H57 | 0,7 | 750 | 6,5 |
| H57 | 0,8 | 750 | 7,49 |
| H75 | 0,6 | 750 | 6,3 |
| H75 | 0,7 | 750 | 7,4 |
| H75 | 0,8 | 750 | 8,4 |
| H75 | 0,9 | 750 | 9,3 |
| H75 | 1,0 | 750 | 10,3 |
| H114 | 0,7 | 600 | 7,35 |
| H114 | 0,8 | 600 | 8,4 |
| H114 | 0,9 | 600 | 9,3 |
| H114 | 1,0 | 600 | 10,3 |
| H114 | 0,8 | 750 | 10,5 |
| H114 | 0,9 | 750 | 11,62 |
| H114 | 1,0 | 750 | 12,88 |
Metal profiled sheet with polymer coating: range and main characteristics
To increase the corrosion resistance and decorative characteristics of galvanized corrugated sheeting, it is coated on one or both sides with a colored polymer layer. Depending on the brand, these products are used for façade cladding, fencing, and as roofing material. Thanks to the wide range of colors, corrugated sheeting can be selected in accordance with the overall color scheme of the building or the surrounding landscape.
Table of dimensions and weight of polymer-coated corrugated sheets
| Brand | Thickness, mm | Width, mm | Weight of 1 linear meter, kg |
| C8 | 0,5 | 1150 | 5,4 |
| C8 | 0,6 | 1150 | 6,3 |
| C8 | 0,7 | 1150 | 7,4 |
| S21 | 0,5 | 1000 | 4,9 |
| S21 | 0,7 | 1000 | 5,9 |
| S21 | 0,8 | 1000 | 6,3 |
| C44 | 0,7 | 1000 | 6,3 |
| C44 | 0,8 | 1000 | 7,4 |
| NS35 | 0,5 | 1000 | 5,4 |
| NS35 | 0,7 | 1000 | 6,3 |
| NS35 | 0,8 | 1000 | 7,4 |
| NS 44 | 0,7 | 1000 | 6,3 |
| NS44 | 0,8 | 1000 | 7,4 |
| H57 | 0,7 | 750 | 6,5 |
| H57 | 0,8 | 750 | 7,49 |
| H60 | 0,7 | 845 | 7,4 |
| H60 | 0,8 | 845 | 8,4 |
Corrugated sheet: types and characteristics
Corrugated steel sheet is a popular building material that has a smooth surface on one side and a corrugated surface on the other. The thickness of the main sheet is 2.5-12.0 mm. Produced in accordance with GOST 8568. Products are sold in sheets or rolls. Width – 600-2200 mm. The height of the protrusions is up to 30% of the thickness of the main sheet, but not less than 0.5 mm.
Due to its anti-slip characteristics, corrugated steel sheet is used in the manufacture of steps of stairs, ramps, passages, floors of elevators, cars, and change houses.
| Thickness of the main sheet, mm, type of corrugation | Sheet size, m x m | Weight 1 m2, kg | Sheet weight, kg |
| 3, "lentils" | 1.5x6 | 24,2 | 217,8 |
| 4, "diamond" | 1.5x6 | 33,5 | 301,5 |
| 4, "lentils" | 1.5x6 | 32,2 | 289,8 |
| 5, "diamond" | 1.5x6 | 41,8 | 376,2 |
| 5, "lentils" | 1.5x6 | 40,5 | 364,5 |
| 6, "diamond" | 1.5x6 | 50,1 | 450,9 |
| 6, "lentils" | 1.5x6 | 48,5 | 436,5 |
| 8, "lentils" | 1.5x6 | 64,9 | 584,1 |
Expanded metal sheet: characteristics and applications
Lightweight metal sheet with cells is made from rolled hot-rolled or cold-rolled steel in accordance with GOST 8706. Perforations can have different shapes. The cells are arranged in a checkerboard pattern at the same distance from each other. Expanded metal sheet (PVL) is used in the construction of fences, for the manufacture of bridges, passages, enclosures, sieves, and gratings for equipment.
Table of dimensions and weight of PVL
| Brand PVL | Sheet size, m x m | Weight 1 m2, kg | Sheet weight, kg |
| 406 | 1x3 | 15,7 | 47,1 |
| 506 | 1x3 | 16,4 | 49,2 |
| 508 | 1x2.4 | 20,9 | 50,16 |
| 508 | 1x2.6 | 20,9 | 54,34 |
| 508 | 1.2x2.55 | 20,9 | 63,95 |
| 510 | 1.2x2.07 | 24,7 | 61,35 |
Source: https://TreydMetall.ru/info/sortament-stalnogo-lista
Steel sheet weight – Calculator and tables
Sheet metal is a rolled piece of a specific material, most often steel, that is widely used in industrial production, construction, automotive and other industries.
Sheet steel is the most popular type of sheet blanks, which is produced using cold or hot rolling technology. In the first case, the steel will be called cold-rolled (maximum sheet thickness up to 5 mm), and in the second - hot-rolled.
The KALK.PRO sheet metal weight calculator allows you to calculate the weight of sheet steel based on known thickness and area. You can also familiarize yourself with the metal grade and regulatory documents in the corresponding tabs of the tool. The calculator operates on the basis of GOST 19903-74 “Hot-rolled sheet metal”.
Using the calculator, you can find the weight of rolled sheets of any size and thickness, for example sheets of 1, 3, 6, 8, 10 mm, etc., the standard material is carbon steel St3st with a density of 7850 kg/m3.
By default, the weight of 1m2 of sheet steel is considered.
In order to calculate the weight of sheet metal using our calculator, you must follow the instructions:
- Select the metal type (default is Steel ).
- Confirm the type of assortment - Sheet / Plate .
- Select the metal grade (default Steel St3st ).
- Specify the sheet parameters - thickness t (mm), width a (mm), length b (mm) .
- Enter the quantity of rolled metal, pcs .
Formula for calculating the weight of sheet metal
The weight of sheet metal can also be calculated independently using simple mathematical formulas and tables according to GOST.
- a – width;
- b – length;
- t – thickness;
- ρ – density.
Weight table for 1 m2 of sheet metal according to GOST 19903-74
| Sheet size (TxWxD), mm | Sheet thickness, mm | Weight of 1 square meter, kg | Sheet weight, kg |
| 0.5x1250x2500 | 0,5 | 3,93 | 12,27 |
| 0.7x1250x2500 | 0,7 | 5,5 | 17,17 |
| 0.8x1250x2500 | 0,8 | 6,28 | 19,63 |
| 1x1250x2500 | 1,0 | 7,85 | 24,53 |
| 1.2x1250x2500 | 1,2 | 9,42 | 29,44 |
| 1.5x1250x2500 | 1,5 | 11,78 | 36,80 |
| 2x1250x2500 | 2 | 15,70 | 49,06 |
| 2.5x1250x2500 | 2,5 | 19,63 | 61,33 |
| 3x1250x2500 | 3 | 23,55 | 73,59 |
| 3.5x1250x2500 | 3,5 | 27,48 | 85,86 |
| 4x1500x6000 | 4 | 31,40 | 282,60 |
| 5x1500x6000 | 5 | 39,25 | 353,25 |
| 6x1500x6000 | 6 | 47,10 | 423,90 |
| 7x1500x6000 | 7 | 54,95 | 494,55 |
| 8x1500x6000 | 8 | 62,80 | 565,20 |
| 1500x6000 | 9 | 70,65 | 635,85 |
| 10x1500x6000 | 10 | 78,50 | 706,50 |
| 12x1500x6000 | 12 | 94,20 | 847,80 |
| 14x1500x6000 | 14 | 109,90 | 989,10 |
| 16x1500x6000 | 16 | 125,60 | 1130,40 |
| 18x1500x6000 | 18 | 141,30 | 1271,70 |
| 20x1500x6000 | 20 | 157,00 | 1413,00 |
| 22x1500x6000 | 22 | 172,70 | 1554,30 |
| Sheet size (TxWxD), mm | Sheet thickness, mm | Weight of 1 square meter, kg | Sheet weight, kg |
| 25x1500x6000 | 25 | 196,25 | 1766,25 |
| 28x1500x6000 | 28 | 219,80 | 1978,20 |
| 30x1500x6000 | 30 | 235,50 | 2119,50 |
| 32x1500x6000 | 32 | 251,20 | 2260,80 |
| 35x1500x6000 | 35 | 274,75 | 2472,75 |
| 36x1500x6000 | 36 | 282,60 | 2543,40 |
| 40x1500x6000 | 40 | 314,00 | 2826,00 |
| 45x1500x6000 | 45 | 353,25 | 3179,25 |
| 50x1500x6000 | 50 | 392,50 | 3532,50 |
| 55x1500x6000 | 55 | 431,75 | 3885,75 |
| 60x1500x6000 | 60 | 471,00 | 4239,00 |
| 65x1500x6000 | 65 | 510,25 | 4592,25 |
| 70x1500x6000 | 70 | 549,50 | 4945,50 |
| 80x1500x6000 | 80 | 628,00 | 5652,00 |
| 90x1500x6000 | 90 | 706,50 | 6358,50 |
| 100x1500x6000 | 100 | 785,00 | 7065,00 |
| 110x1500x6000 | 110 | 863,50 | 7771,50 |
| 120x1500x6000 | 120 | 942,00 | 8478,00 |
| 130x1500x6000 | 130 | 1020,50 | 9184,50 |
| 140x1500x6000 | 140 | 1099,00 | 9891,00 |
| 150x1500x6000 | 150 | 1177,50 | 10597,50 |
| 160x1500x6000 | 160 | 1256,00 | 11304,00 |
All information on the site is provided for informational purposes only. The user is solely responsible for all possible consequences arising from the use of the information received. Under no circumstances or conditions can responsibility for the consequences that directly or indirectly result from the use of information or software posted on this site be assigned to the site owners and be the basis for legal proceedings or other prosecution. We accept payment: 2014 - 2020 Kalk.Pro: Online construction calculators - 3D calculations of stairs, roofs, foundations.
Source: https://kalk.pro/metal-rolling/hot-and-cold-rolled-sheet/
What determines the weight of a steel sheet and how to determine it
Nowadays, steel is in special demand as a durable and reliable building material. It is used in the form of blanks for mechanical engineering, construction work and other industries. The use of steel sheets is also popular. The latter differ in area, thickness, rolling strength, rolling method, edge character and flatness. The scope of application of the material and its mass, and, accordingly, the price, depend on these parameters.
Characteristics of steel
To determine the mass of a steel sheet, you can use special online calculators, which are presented on many websites. If you don’t have them at hand, a table will come to the rescue.
The thickness of the steel can be:
- Thin - thickness does not exceed 3.99 mm. This is usually a cold-rolled metal.
- Thick - thickness reaches 160 mm. These most often include hot-rolled steel.
By the nature of the edge:
- With cut edge;
- With uncut edge.
By flatness:
- Particularly high flatness or PO;
- High flatness or PV;
- Improved flatness or PU;
- Normal flatness or PN.
By rolling strength:
- A - increased accuracy;
- B - normal accuracy.
By production method:
- Cold rolled;
- Hot rolled - hot metal is rolled out using a special press to the desired thickness.
Additionally, galvanized and corrugated (rhombic and lentil) options are available. Depending on the selected parameters, the weight of the steel will also fluctuate.
General formula
To find the mass, the general formula is usually used:
Weight = surface area (length x width) x weight per kilogram per 1 square meter. meter,
where the weight is determined from the table, based on the thickness and rolling method. The length and width should be converted to meters.
If you don’t have a table at hand, you can use the following formula. It is suitable for determining the weight of sheets obtained by hot-rolled and cold-rolled methods.
Weight = length x width x thickness x 7.85,
where 7.85 kg/dm3 is the density of steel 1 mm thick. Length and width should be in meters, thickness - in millimeters.
Cold rolled steel
Depending on the parameters, the weight of the steel sheet can vary from 5.5 kg to 47 kg, with the weight of steel per square meter from 2.75 kg to 23.5 kg. The table below will indicate the weight for a steel sheet 1 meter wide and 2 meters long.
Material parameters range from 0.35 mm to 1 mm, pitch - 0.05 mm
Material parameters range from 1.2 mm to 2 mm, pitch - 0.1 mm
Material parameters range from 2.2 mm to 3.5 mm
Hot rolled steel
When hot rolled, the thickness of the steel sheet ranges from 1.5 mm to 160 mm. The weight ranges from 12 kg to 1256 kg.
Material parameters range from 1.5 mm to 3.5 mm, pitch - 0.5 mm
Material parameters range from 4 mm to 10 mm, pitch - 1 mm
Material parameters range from 10 mm to 40 mm
Material parameters range from 45 mm to 160 mm
Other classes of steel sheets
When calculating the weight of steel, it is important to consider the differences between hot-rolled and cold-rolled steel, zinc-coated sheets and corrugated versions. Due to the peculiarities of their creation, their weight and parameters differ significantly. For example, the thickness of galvanized metal consists of the metal itself and the coating on top and bottom. In the table they are already included in the specified parameters.
The parameters of galvanized material range from 0.35 mm to 1 mm
Galvanized material
Material with diamond and lentil corrugation size 1.25*2.5 m
Material with diamond and lentil corrugation size 1.5*6 m
Source: https://stanok.guru/stal/kak-opredelit-ves-stalnogo-lista.html
Weight of sheets, rolled steel sheets GOST 16523-89, GOST 14637-89
All rolled products, depending on their shape, can be divided into four main groups:
a) grade steel;
b) sheet steel;
c) pipes;
d) special types of rental.
Rolled sheets of steel and non-ferrous metals are used in various industries and construction. In this regard, sheet steel, for example, is divided into automotive, transformer, roofing tin, etc. The production of sheet steel with tin, zinc, aluminum and plastic coatings, polymer coating, as well as flat, smooth and profiled: corrugated sheets, expanded metal, perforated.
Sheet steel is divided into groups depending on the thickness of the section. Sheets more than 4 mm are classified as thick sheet steel, and sheets less than 4 mm are classified as thin sheet metal. In this case, there are the following types of sheet steel: shipbuilding, boiler, electrical, tin, acid- and heat-resistant, armor, etc.
The qualitative characteristics of flat products are determined by mechanical properties, chemical composition, molecular structure, use for further processing and, finally, smelting method. When producing rolled sheets, the thickness may have plus or minus tolerances, which entails changes in the actual weight of a square meter of sheet.
The larger the dimensional tolerance for a given flat product (the difference between the maximum and minimum dimensions of the flat product), the greater will be the difference between the theoretical weight of the sheet steel and the actual weight.
Hot rolled sheet of ordinary quality is made from thin sheet steel (thickness 0.5 mm - 3.9 mm) GOST 16523-89 and thick sheet steel (thickness 4 mm - 160 mm) GOST 14637-89. Flat sheet metal is widely used by the company "Skhid-budkonstruktsiya" in the production of steel containers.
The assortment of steel sheet corresponds to GOST 19903-74, the chemical composition of steel corresponds to GOST 380-88. The assortment for cold-rolled sheet steel provides for the supply of sheets with a width of 600–1400 mm and a thickness of 0.2–3.9 mm. Sheet length 1200-3500 mm. Assortment standards for cold-rolled steel coils provide for the supply of strips with a width of 200-2300 mm and a thickness of 0.2-4 mm.
The current standards stipulate specific gravity, tolerances for sheet thickness and thickness variations, depending on the dimensions of the sheet or tape and delivery conditions. The standard includes standards for tensile strength and elongation. The permissible warpage per 1 linear line is also specified. m along the length and width of the sheet and control for decarbonization.
In some cases, the technical conditions stipulate tighter tolerances than in the standards.
Cold-rolled and hot-rolled sheets
Cold-rolled sheet with a thickness of 1 mm, 1.2 mm, 1.5 mm, 2 mm, 3 mm, available from steel grades 08KP, 3SP/PS.
Hot rolled sheet thickness 2mm, 2.5mm, 3mm, sheet 4, 5, 6mm, 8-10mm, 12mm, 14-16mm, 18mm, 20-32mm, 35mm, 36mm, 40 mm, 45 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 103 mm, available in grade st 3SP/PS, steel 09G2S-12; thickness from 4 mm to 50 mm steel grade 45.
Galvanized sheet thickness 0.5 mm, 0.55 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm - galvanized iron + polymer coating.
Cold rolling has two great advantages over hot rolling: firstly, it allows the production of sheets and strips with a thickness of less than 0.8-1 mm, down to several microns, which is unattainable by hot rolling; secondly, it ensures products of higher quality in all respects - dimensional accuracy, surface finish, physical and mechanical properties. These advantages of cold rolling have led to its widespread use in both ferrous and non-ferrous metallurgy.
In the production of hot-rolled steel sheet, the metal is first heated and then deformed using special rolling mills by rolling. Cold rolling ensures uniform sheet thickness and also improves its properties by hardening the surface.
Hardening is formed as a result of changes in the structure of the steel sheet . sheet, metal grains are stretched and oriented along the direction of plastic flow of the metal with axes of greatest strength. A metal sheet acquires different properties along and across, i.e.
along the length and width of the steel strip . At large degrees of plastic deformation, all metal grains are almost identically oriented in the structure of rolled steel sheets . Plastic deformation during rolling of a steel sheet causes hardening of the metal - cold hardening or cold hardening.
In this regard, to restore plastic properties it is necessary to carry out annealing.
Hot-rolled and cold-rolled sheets are used in mechanical engineering, metal structures, construction, mining and other industries. The actual scope of application determines the requirements for sheet metal. For the manufacture of products by stamping, sheet metal is used: cold-rolled, hot-rolled, cold-rolled coil, galvanized steel in coils, strip metal.
This table is used when calculating the mass of rolled sheets based on the specific gravity of a square meter of sheet metal.
Sheet Metal Weight Table
Rolled sheet metal according to GOST| thickness, mm | weight, kg/m2 | thickness, mm | weight, kg/m2 | thickness, mm | weight, kg/m2 | thickness, mm | weight, kg/m2 |
| 0,5 | 3,925 | 1,4 | 10,99 | 6 | 47,1 | 18 | 141,3 |
| 0,55 | 4,32 | 1,5 | 11,77 | 7 | 54,95 | 20 | 157 |
| 0,6 | 4,71 | 1,8 | 14,13 | 8 | 62,8 | 22 | 172,7 |
| 0,7 | 5,5 | 2 | 15,7 | 9 | 70,65 | 25 | 196,25 |
| 0,8 | 6,28 | 2,5 | 19,62 | 10 | 78,5 | 30 | 235,5 |
| 0,9 | 7,06 | 3 | 23,55 | 12 | 94,2 | 40 | 314 |
| 1 | 7,85 | 4 | 31,4 | 14 | 109,9 | 50 | 392,5 |
| 1,2 | 9,42 | 5 | 39,25 | 16 | 125,6 | 60 | 471 |
Calculation of how much 1m2 of steel sheet weighs using the formula
How to calculate the weight of sheet metal by area?
Using a simple calculator you can easily calculate the weight of a steel sheet without having a table of thickness and weight of 1m2.
The weight of a sheet of metal is calculated using a regular calculator using the formula:
P = H*B*L* 7.85
where
P- theoretical weight, kg
L is the length of the metal sheet in linear meters, m;
H—sheet thickness, mm;
B—width of rolled sheets, m;
7.85 kg/dm3 - density of black steel, specific gravity - corresponds to the weight of a square meter of steel 1 mm thick.
The weight of sheet metal is calculated in kilograms (kg), if the dimensions of the sheet thickness are substituted into the formula for calculating the weight of a sheet of metal in millimeters (mm), and the length and width of the sheet in meters (m). Knowing the weight of a steel sheet, you can easily calculate how many sheets are in a ton or pack of a certain mass.
The weight of galvanized sheet will differ slightly from black, because... The thickness of the zinc coating is several micrometers.
To quickly calculate the weight of rolled sheets, use the “Metal Calculator” in the “Metal Assortment” section of the website. The sheet weight calculator calculates the weight for different grades of steel, which is important if you need to calculate the weight of a stainless steel sheet or made of non-ferrous metal. The sheet metal calculator calculates the weight based on the dimensions of the workpiece and thickness in mm, and the dimensions of the steel sheet (based on the total weight of the package and the thickness of the rolled sheet).
The assortment of sheet steel is needed primarily by suppliers for metal purchases to calculate the weight of rolled metal. If in the process of work the question often arises about how to find out the weight of sheet metal, but there is no assortment of rolled metal at hand, the best way to solve this problem is to calculate the weight of the sheet using the above formula on a calculator.
Source: https://sbk.ltd.ua/ru/sortament-ves-metalloprokata/133-ves-lista-stalnogo-listovogo-prokata-gost-16523-89-gost14637-89.html
Rolled sheet weight table
Constant improvement of the construction industry brings various new products into our everyday life, with the help of which modern builders have the opportunity to build new structures. Such innovations make it possible to invent more universal elements that find their application in mechanical engineering, the production of specific equipment and in other areas of human activity.
One of these elements is steel sheets, which act as an indispensable part in the construction of various building structures and are used in the development of modern cars and various equipment.
Steel sheets advantageously combine strength, reliability, durability and availability, which makes them very popular design elements among domestic and foreign manufacturing companies.
In more detail, the advantages of steel sheet allow it to be used for:
- construction of welded structures;
- creating hulls for cars or watercraft;
- production of equipment resistant to chemicals and elevated temperatures;
- production of agricultural and industrial machinery.
By the way, the weight of such a sheet is as acceptable as possible, which makes it available for delivery to any facility - customers can place an order for a large batch of steel sheet that will fit even in a not very spacious car.
Due to the specifics of the sheet, including weight, each individual element fits comfortably on top of the other, which ensures the most compact packaging, which has a positive effect on maintaining the integrity of the sheets during transportation.
Variety of steel sheet
In practice, with the use of modern equipment and a team of experienced professionals, steel products can be manufactured in a wide variety of designs, which allows company clients to implement almost any design solution! Consumers are offered products in the following versions:
- with a corrugated surface (used in the installation of production sites, for the production of high-quality comfortable stairs and other structures where it is necessary to minimize the possibility of sliding on the surface);
- with a corrugated surface (such sheets are mounted as a roofing surface; there is additional treatment with zinc or polyester to increase the original technical characteristics, including reducing the weight of such sheets);
- with a perforated surface (the structural element is produced for the purpose of using it to create unique designer interiors);
- with a cut surface (coated with polymer materials and used for technical purposes);
- stamped sheet (designed for processing external walls of buildings).
As you can see, multifunctional steel sheets can be used for a variety of purposes, the specifics of which are significantly different. Customers only need to indicate their requirements to manufacturers, who are ready to produce high-quality steel elements with specific features.
Weight of steel sheets
Do not forget that the less mass a component has, the easier and more profitable it is to use it to implement your projects. The weight of the steel sheet makes it stand out among other similar products. Detailed data on the mass of products (sheet weight and thickness) can be found in the table below:
| Rolled sheet metal according to GOST | |||||||
| thickness of steel sheet, mm | sheet weight, kg/m2 | thickness, mm | sheet weight, kg/m2 | thickness, mm | sheet weight, kg/m2 | thickness, mm | sheet weight, kg/m2 |
| 0,5 | 3,925 | 1,4 | 10,99 | 6 | 47,1 | 18 | 141,3 |
| 0,55 | 4,32 | 1,5 | 11,77 | 7 | 54,95 | 20 | 157 |
| 0,6 | 4,71 | 1,8 | 14,13 | 8 | 62,8 | 22 | 172,7 |
| 0,7 | 5,5 | 2 | 15,7 | 9 | 70,65 | 25 | 196,25 |
| 0,8 | 6,28 | 2,5 | 19,62 | 10 | 78,5 | 30 | 235,5 |
| 0,9 | 7,06 | 3 | 23,55 | 12 | 94,2 | 40 | 314 |
| 1 | 7,85 | 4 | 31,4 | 14 | 109,9 | 50 | 392,5 |
| 1,2 | 9,42 | 5 | 39,25 | 16 | 125,6 | 60 | 471 |
Of course, for a more detailed calculation of the quantity of required products and the dimensions of each individual unit, including the weight of the steel sheet, the process will require the involvement of qualified construction specialists who can analyze the specifics of the project and advise customers how much material is required to implement the plan, taking into account the weight of the sheet.
Competent assistance from our company employees
The Moskomplekt company specializes in construction and renovation work, so from us you can always get professional assistance in implementing the most daring decisions for the construction of original buildings and the creation of exclusive products.
Competent craftsmen are ready to complete work of any complexity in the shortest possible time or provide you with any quantity of high-quality sheet, the weight of which will allow it to be easily transported throughout the country, so you don’t have to worry about the reliability and speed of completing the task - taking care of the interests of clients is our priority.
Prices for rolled steel elements, depending on the specifics of the sheet, including weight, are presented in this table:
Hot rolled steel sheet
| Sheet thickness | Sheet sizes | Unit | Cost in rubles |
| 1.5 mm | 1.5*1250*2500 | PC. | 2011 |
| 2 mm | 2*1250x*2500 | PC. | 2441 |
| 2.5 mm | 2.5*1250*2500 | PC. | 3038 |
| 3 mm | 3*1250*2500 | PC. | 3625 |
| 4 mm | 4*1500*3000 | PC. | 6700 |
| 4 mm | 4*1500*6000 | PC. | 12943 |
| 5 mm | 5*1500*3000 | PC. | 8196 |
| 5 mm | 5*1500*6000 | PC. | 16420 |
| 6 mm | 6*1500*3000 | PC. | 10228 |
| 6 mm | 6*1500*6000 | PC. | 20048 |
| 8 mm | 8*1500*6000 | PC. | 26005 |
| 10 mm | 10*1500*6000 | PC. | 32460 |
| 12 mm | 12*1500*6000 | PC. | 40416 |
Hot rolled steel sheet
| Sheet thickness | Sheet sizes | Unit | Cost in rubles |
| 1.5 mm | 1.5*1250*2500 | m2 | 643 |
| 2 mm | 2*1250x*2500 | m2 | 780 |
| 2.5 mm | 2.5*1250*2500 | m2 | 970 |
| 3 mm | 3*1250*2500 | m2 | 1160 |
| 4 mm | 4*1500*3000 | m2 | 1500 |
| 4 mm | 4*1500*6000 | m2 | 1430 |
| 5 mm | 5*1500*3000 | m2 | 1820 |
| 5 mm | 5*1500*6000 | m2 | 1830 |
| 6 mm | 6*1500*3000 | m2 | 2270 |
| 6 mm | 6*1500*6000 | m2 | 2230 |
| 8 mm | 8*1500*6000 | m2 | 2900 |
| 10 mm | 10*1500*6000 | m2 | 3600 |
| 12 mm | 12*1500*6000 | m2 | 4500 |
You can obtain all other information on the weight of the sheets and other features of the products during a telephone consultation with the managers of our organization.
Source: http://ooo-asteko.ru/ves-listovogo-prokata-tablitsa/
Calculation of sheet steel weight
All rolled products, depending on their shape, can be divided into four main groups:
a) grade steel;
b) sheet steel;
c) pipes;
d) special types of rental.
Rolled sheets of steel and non-ferrous metals are used in various industries and construction. In this regard, sheet steel, for example, is divided into automotive, transformer, roofing sheet, etc.
The production of sheet steel with tin, zinc, aluminum and plastic coatings, polymer coating, as well as flat, smooth and profiled: corrugated sheets, expanded metal, perforated, is expanding.
Sheet steel is divided into groups depending on the thickness of the section. Sheets more than 4 mm are classified as thick sheet steel, and sheets less than 4 mm are classified as thin sheet metal. In this case, there are the following types of sheet steel: shipbuilding, boiler, electrical, tin, acid- and heat-resistant, armor, etc.
The qualitative characteristics of flat products are determined by mechanical properties, chemical composition, molecular structure, use for further processing and, finally, smelting method. When producing rolled sheets, the thickness may have plus or minus tolerances, which entails changes in the actual weight of a square meter of sheet.
The larger the dimensional tolerance for a given flat product (the difference between the maximum and minimum dimensions of the flat product), the greater will be the difference between the theoretical weight of the sheet steel and the actual weight.
Hot rolled sheet of ordinary quality is made from thin sheet steel (thickness 0.5 mm - 3.9 mm) GOST 16523-89 and thick sheet steel (thickness 4 mm - 160 mm) GOST 14637-89. Flat sheet metal is widely used by the company "Skhid-budkonstruktsiya" in the production of steel containers.
The assortment of steel sheet corresponds to GOST 19903-74, the chemical composition of steel corresponds to GOST 380-88. The assortment for cold-rolled sheet steel provides for the supply of sheets with a width of 600–1400 mm and a thickness of 0.2–3.9 mm. Sheet length 1200-3500 mm. Assortment standards for cold-rolled steel coils provide for the supply of strips with a width of 200-2300 mm and a thickness of 0.2-4 mm.
The current standards stipulate specific gravity, tolerances for sheet thickness and thickness variations, depending on the dimensions of the sheet or tape and delivery conditions. The standard includes standards for tensile strength and elongation. The permissible warpage per 1 linear line is also specified. m along the length and width of the sheet and control for decarbonization.
In some cases, the technical conditions stipulate tighter tolerances than in the standards.
Rolled sheets are divided into cold-rolled and hot-rolled
Cold-rolled sheet with a thickness of 1 mm, 1.2 mm, 1.5 mm, 2 mm, 3 mm, available from steel grades 08KP, 3SP/PS.
Hot rolled sheet thickness 2mm, 2.5mm, 3mm, sheet 4, 5, 6mm, 8-10mm, 12mm, 14-16mm, 18mm, 20-32mm, 35mm, 36mm, 40 mm, 45 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 103 mm, available in grade st 3SP/PS, steel 09G2S-12; thickness from 4 mm to 50 mm steel grade 45.
Galvanized sheet thickness 0.5 mm, 0.55 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm - galvanized iron + polymer coating.
Cold rolling has two great advantages over hot rolling: firstly, it allows the production of sheets and strips with a thickness of less than 0.8-1 mm, down to several microns, which is unattainable by hot rolling; secondly, it ensures products of higher quality in all respects - dimensional accuracy, surface finish, physical and mechanical properties. These advantages of cold rolling have led to its widespread use in both ferrous and non-ferrous metallurgy.
In the production of hot-rolled steel sheet, the metal is first heated and then deformed using special rolling mills by rolling. Cold rolling ensures uniform sheet thickness and also improves its properties by hardening the surface.
Hardening is formed as a result of changes in the structure of the steel sheet . sheet, metal grains are stretched and oriented along the direction of plastic flow of the metal with axes of greatest strength. A metal sheet acquires different properties along and across, i.e.
along the length and width of the steel strip . At large degrees of plastic deformation, all metal grains are almost identically oriented in the structure of rolled steel sheets . Plastic deformation during rolling of a steel sheet causes hardening of the metal - cold hardening or cold hardening.
In this regard, to restore plastic properties it is necessary to carry out annealing.
Hot-rolled and cold-rolled sheets are used in mechanical engineering, metal structures, construction, mining and other industries. The actual scope of application determines the requirements for sheet metal. For the manufacture of products by stamping, sheet metal is used: cold-rolled, hot-rolled, cold-rolled coil, galvanized steel in coils, strip metal.
This table is used when calculating the mass of rolled sheets based on the specific gravity of a square meter of sheet metal.
Weight of galvanized sheet according to GOST 0.5, 0.7, 1, 2 mm. Specific gravity table
The inherent disadvantage - corrosion - is eliminated by several methods:
- Application of corrosion-resistant substances that protect the top layer. The service life of such protection is 1-7 years.
- Introduction of elements of other metals into the upper part of the surface (zinc plating). The protection period is more than 20 years.
For critical structures, it is important to take into account the technology that determines the total mass. Among all the methods, the best parameters are the introduction of zinc into the surface, since the weight of the galvanized sheet varies over a wide range (depending on the thickness), and the adhesion strength is ensured by bonds at the molecular level. Unlike all types of coatings, this one provides the highest possible adhesion of 2 metals in a layer that is taken into account only in microns.
Galvanizing
Fe-Zn forms a galvanic couple, where zinc has a lower negative electrochemical potential. When interacting with an electrolyte (which can be ordinary or salt water, or even moisture), zinc takes on the corrosive load, keeping the iron intact.
The protection will work until the zinc layer is completely destroyed. In any case, for a 0.7 mm galvanized sheet, the weight will change over time within insignificant limits. In the case of local forced destruction of the zinc coating, zinc hydroxide is obtained, which prevents the formation of iron oxide.
There are 2 galvanizing methods used in industry:
- Hot - metal parts are immersed in a zinc solution. The residence time is strictly regulated, depending on the thickness of the desired layer. In addition, when heated, partial tempering of the metal occurs, which improves the mechanical parameters of the product.
- Cold is a more affordable way. A protective layer is formed when applying zinc-containing mixtures. The penetration of zinc ions occurs due to the potential difference. And despite the fact that the layer obtained by this method is much smaller, it also effectively protects the surface from corrosion.
Each enterprise has developed a coating technology that determines how much a galvanized sheet ultimately weighs, depending on the method, steel grade and other conditions.
Why do you need to know the mass of a leaf?
The weight of the structure is calculated at the design stage. This is an essential component of the safe construction and operation of buildings. Since galvanized steel 1 mm, the weight of 1 m² varies within a few kilograms, then, depending on the dimensions, the mass of the overall structure is taken into account in tons, which can already increase it.
The second reason why you need to know the specific gravity of galvanized steel is to determine the thickness of the material and its workmanship. Precisely maintained technology is determined by the exact ratio of the declared mass to the tabulated or formula-calculated value.
Assortment according to GOST
The products of any manufacturer of galvanized steel must comply with GOST 14918, on the basis of which technological maps are developed that are valid within one enterprise. The standard applies to thin-sheet galvanized steel made:
- cold drawing method;
- for delivery in rolls or sheets;
- hot or cold galvanizing method;
- for stamping and profiling.
In galvanized sheets manufactured according to GOST 14918 80, the weight varies between 3.34-19.82 kg/m².
Source: https://punktpriema.ru/articles/ves-otsinkovannogo-lista.html
Sheet metal weight in tables
Knowing the exact weight of sheet metal will allow you to avoid problems with an irresponsible supplier. It will help to preliminary estimate the amount of financial costs for a new project. Understand what load will put pressure on the metal structure being developed. As in any business, there are nuances here, so let’s not “go from side to side” and begin to study this issue.
General concepts
Before proceeding directly to calculating the weight, we need to understand what sheet metal is. A metal sheet is a rectangular profile, the thickness of which is disproportionately small compared to its length and width. Its parameters and dimensions are regulated by GOST 19903-2015 and GOST 19904-2015.
According to these state standards, sheet profiles are divided into the following categories:
- According to the production method.
- In terms of manufacturing accuracy.
- According to the level of surface flatness.
- By edge type.
- By type of material.
Let us now examine each point in more detail.
Production methods
Metal sheets are made by hot or cold rolling. These technologies involve rolling rollers onto a workpiece, as a result of which its surface is rolled out.
In general, the procedure for hot and cold rolling is similar. Only in the first case is the workpiece preheated to a temperature of 300-400 ºC. This is done in order to increase the malleability of the metal, which makes it possible to obtain sheets of greater thickness.
According to manufacturing accuracy
Depending on the purpose in production, the sheet can be manufactured with two degrees of accuracy: normal (B) and increased (A). High-precision rolled products have a more regular surface shape. For this reason, such a sheet has better strength and surface roughness.
By flatness
Flatness characterizes the parallelism of the faces to each other. As with shape accuracy, its value greatly influences the sheet's resistance to mechanical load.
There are sheets of especially high (PO), high (PV), improved (PU) and normal flatness (PN).
By edge type
The edge type characterizes the shape of the rolled edges. There are two varieties: edged (O) and unedged (NO). The first type requires additional surgery, which makes it more expensive. But at the same time, such a sheet is more convenient to use.
Weight calculation
The weight of a sheet profile is calculated in two ways:
- Using formula.
- Using ready-made tables.
The first method represents the following relationship between geometric and physical quantities:
Sheet weight (kg) = length (m)*width (m)*thickness (m)*material density (7850 kg\m3 for steel)
Weight tables are even easier to use than the above method. Correlate the thickness and material of the sheet and get a mass value of 1 m2. Multiply this number by the area of the desired sheet and get its weight.
Theoretical Sheet Metal Weight Table
| Cold rolled sheet GOST steel 08ps/kp | Weight of one meter square m2 (kg) |
| Cold-stained sheet 0.5 | 3,925 |
| Cold-stained sheet 0.6 | 4,71 |
| Cold-stained sheet 0.7 | 5,5 |
| Cold-stained sheet 0.8 | 6,28 |
| Cold-stained sheet 0.9 | 7,06 |
| Cold-stained sheet 1.0 | 7,85 |
| Sheet cold-stained 1.2 | 9,42 |
| Cold-stained sheet 1.4 | 10,99 |
| Cold-stained sheet 1.5 | 11,77 |
| Cold-stained sheet 1.8 | 14,13 |
| Cold-smoked sheet 2.0 | 15,7 |
| Cold-stained sheet 2.5 | 19,62 |
| Cold-smoked sheet 3.0 | 23,5 |
| Cold-stained sheet 3.5 | 27,47 |
| Hot rolled sheet GOST steel st3sp/ps5 | Weight of one meter square m2 (kg) |
| Hot rolled sheet 1.5 | 11,77 |
| Hot rolled sheet 2.0 | 15,7 |
| Hot rolled sheet 2.5 | 19,62 |
| Hot rolled sheet 3.0 | 23,5 |
| Hot rolled sheet 4.0 | 31,4 |
| Hot rolled sheet 5.0 | 39,25 |
| Hot rolled sheet 6.0 | 47,1 |
| Hot rolled sheet 8.0 | 62,8 |
| Hot rolled sheet 10.0 | 78,5 |
| Hot rolled sheet 12.0 | 94,2 |
| Hot rolled sheet 14.0 | 109,9 |
| Hot rolled sheet 16.0 | 125,6 |
| Hot rolled sheet 18.0 | 141,3 |
| Hot rolled sheet 20.0 | 157 |
| Galvanized sheet GOST steel 08ps/kp | Weight of one meter square m2 (kg) |
| Sheet ots. 0.4 | 3,34 |
| Sheet ots. 0.45 | 3,73 |
| Sheet ots. 0.5 | 4,13 |
| Sheet ots. 0.55 | 4,52 |
| Sheet ots. 0.6 | 4,91 |
| Sheet ots. 0.7 | 5,70 |
| Sheet ots. 0.75 | 6,09 |
| Sheet ots. 0.8 | 6,48 |
| Sheet ots. 0.9 | 7,27 |
| Sheet ots. 1.0 | 8,05 |
| Sheet ots. 1.2 | 9,62 |
| Sheet ots. 1.5 | 11,97 |
| Sheet ots. 2.0 | 15,9 |
| Sheet ots. 2.5 | 19,82 |
| Lentil corrugated sheet GOST steel st3sp/ps5 | Weight of one meter square m2 (kg) |
| Lentil leaf 3.0 | 24,5 |
| Lentil leaf 4.0 | 32,2 |
| Lentil leaf 5.0 | 40,5 |
| Lentil leaf 6.0 | 48,5 |
| Lentil leaf 0.8 | 64,9 |
| Lentil leaf 10 | 80,9 |
| Lentil leaf 12 | 96,8 |
| Corrugated rhombic sheet GOST steel st3sp/ps5 | Weight of one meter square m2 (kg) |
| Rhombic leaf 3.0 | 25,1 |
| Rhombic leaf 4.0 | 33,5 |
| Rhombic leaf 5.0 | 41,8 |
| Rhombic leaf 6.0 | 50 |
| Rhombic leaf 8.0 | 66 |
| Rhombic leaf 10 | 83 |
| Rhombic leaf 12 | 99,3 |
Source: https://prompriem.ru/stati/ves-listovogo-metalla.html
How much does sheet metal weigh?
· 09.09.2019
Weight of sheets of steel and other metals
The theoretical mass of a linear meter of rolled steel sheets and coils is calculated based on reference information according to GOST or using the simple geometric formula ρу = ρ · a · s, (kg/m), where ρ is the steel density 7850 kg/m3; s—steel thickness in mm; a is the sheet width in mm.
Steel sheet weight
Sheet steel range
Steel sheets differ in the manufacturing method: cold-rolled and hot-rolled.
In this section we will look at the weight of hot-rolled steel sheet
Weight per square meter of steel sheet (GOST 19903-74 and 19904-90)
Thickness of a steel sheet S, mmWeight of 1 m2 of steel sheet, kgThe weight of a steel sheet depends on the thickness of the sheet and the size of the sheet, for example we have a steel sheet measuring 1.2 m by 3 meters in length and 3 mm thick, we calculate 1.2 X 3 = 3 .6 square meters, and the weight of a square meter of steel sheet according to our weight table is 23.55 kg/sq.m. We get the weight of the steel sheet (3.6 sq. m. X 23.55 kg/sq. m.) equal to 84.78 kilograms. In order to always have the steel sheet weight table at hand, we suggest using our development to determine the weight of the entire assortment rolled metal, this is a universal tool that allows you to determine the weight of not only a hot-rolled steel sheet, but also the weight of a corrugated sheet in accordance with GOST 8568 - 77 (p - rhombic, h - lentil corrugation). Also in our tool, assortment of metal products “Ruler - S”, you will find data on determining the weight of reinforcement GOST 5781 -82, Welded water and gas pipes GOST 3262 - 75, weight of steel rope according to GOST 2688 - 80, weight of equal angle angle, steel strip GOST 4405 – 75, the weight of the I-beam and much more. Assortment of sheet steel We present to your attention a track impact tool used to accelerate rails when discharging rail strands outside the designed temperature range - this is a gripping device that is thrown onto the rail and takes on impact loads (size 400x400x80 and weight 100 kg).MAGNITOGORSK, May 18, news agency UralPolit.Ru. Today, the 21st International Specialized Exhibition “Caucasus Build – 2016”, dedicated to construction, begins its work in the capital of Georgia. The Magnitogorsk Iron and Steel Works takes part in the event, reports the MMK information department. In the first quarter of 2016, the Severstal Distribution group of companies (distribution network of the Severstal Russian Steel division) increased sales volume to 350 thousand tons, which is 18% more than the corresponding period of last year. In January-March of this year, 14% of the steel products of the Severstal Russian Steel division were sold through the distribution network. Seoul. Europe and the United States, blaming China for flooding their markets with cheap steel, “forget” about their allies from Japan and South Korea, who are also actively lowering prices in an effort to maintain market share. As Reuters writes today, the underestimation of the world's second and third steel exporting countries only underscores the pressure faced by the steel industry around the world. According to analysts surveyed by Reuters, Japanese and South Korean steel companies offer their products abroad at a third cheaper, than in the domestic market. Representatives of the companies refuse to publicly discuss pricing, but admit that they sell steel cheaper in order to compete with Chinese manufacturers. Zyuzin asked for help from minority shareholdersThe main shareholder of Mechel, Igor Zyuzin (controls 67.42% of the shares), announced a possible postponement of the start of the restructuring of most of the company’s debts from 2017 to 2020, also appealing to minority shareholders with a request to support its terms. According to him, agreements have already been reached with the largest lenders stipulate that the loan repayment period will be shifted to 2017, and for most loans the start date of repayment may be postponed to 2020. Weight of steel sheet / Assortment of rolled metal “Ruler”Assortment of steel sheets Steel sheets differ according to the manufacturing method: cold-rolled and hot-rolled. In this section we will consider the weight of hot-rolled steel sheets. Weight per square meter of steel sheets (GOST 19903-74 and 19904-90) Thickness of steel sheet S, mm Weight of 1 m2 of steel sheet, kg Weight of steel sheet depends on the thickness of the sheet and the size of the sheet, for example, we have a steel sheet measuring 1.2 m by 3 meters in length and a thickness of 3 mm, we calculate 1.2 X 3 = 3.6 square meters, and the weight of a square meter of steel sheet according to our weight table is 23.55 kg/sq.m. We get the weight of the steel sheet (3.6 sq. m. X 23.55 kg/sq. m.) equal to 84.78 kilograms. In order to always have the steel sheet weight table at hand, we suggest using our development to determine the weight of the entire assortment rolled metal, this is a universal tool that allows you to determine the weight of not only a hot-rolled steel sheet, but also the weight of a corrugated sheet in accordance with GOST 8568 - 77 (p - rhombic, h - lentil corrugation). Also in our tool, assortment of metal products “Ruler - S”, you will find data on determining the weight of reinforcement GOST 5781 -82, Welded water and gas pipes GOST 3262 - 75, weight of steel rope according to GOST 2688 - 80, weight of equal angle angle, steel strip GOST 4405 – 75, I-beam weight and much more. Sheet steel range Weight per square meter of sheet |
| Thickness S, mm | Weight of 1m 2 sheets, kg |
| 0,5 | 3,925 |
| 0,6 | 4,710 |
| 0,7 |
Source: https://vi-pole.ru/skolko-vesit-listovoj-metall.html
Sheet weight
24.12.2017
Manufacturers often have to deal with the manufacture or processing of any structures made of sheet metal of different thicknesses.
In this case, you have to transport it. And when transporting, it is simply necessary to know the weight of this metal so as not to overload the lifting mechanisms (crane, forklift, car).
The fact is that when sheet metal lies in a stack, its weight can be taken as the mass of a solid monolith, because there are practically no gaps between the sheets. To determine the weight of galvanized sheets, you need to know the mass of one sheet, and here you can go in two ways.
The first, most common, is to read the transportation markings painted on the end of the pack in accordance with GOST No. 14192-77. It should contain all the main parameters of steel, including weight.
The second method has to be used when for some reason this inscription with the metal data is not visible. Then you have to use the weight tables for steel and rolled products according to GOST No. 13567-78.
- 1 Calculation of the weight of 1 m2 of sheet and rolled stock
- 2 Weight of rolled steel
Calculation of the weight of 1 m2 of sheet and rolled stock
For example, we have a galvanized sheet with an area of S square meters. Using tabular data, we find out the weight of 1 m2 of rolled sheet with a thickness of 2,3,4,5,6,8,10 mm. By multiplying the value from the table by the area, we get the required sheet weight.
Calculation table for galvanized steel with polymer coating
If non-standard rolled sheets (of different thicknesses) are used, then you can safely use the formula:
M = L*W*T* (p) (7.85), where
T – rolled product thickness;
D – leaf length;
Р=7.85 – sheet steel data from the table;
W – product width.
When the weight of one steel sheet has been determined, it is necessary to calculate the weight of the entire bundle of rolled products, for which the result obtained is multiplied by the number of sheets in the package.
Rolled steel weight
And also to determine the weight of different sheets of hot-rolled steel st3sp/ps5, it is recommended to use another table:
For cold rolled steel the indicators will be completely different:
Cold rolled steel sheet 08ps/kp
And for galvanized steel, the regulatory data according to the GOST reference book are also different.
Galvanized steel 08ps/kp. Weight of 1m sheet
It must be remembered that the value from the table is the conditional weight of the steel sheet, since the actual weight of the steel sheet may differ slightly from the nominal value, depending on the grade of steel and the permissible rolling errors.
Weight of sheet steel Link to main publication
Source: https://viascio.ru/materialy/ves-listovoj-stali
