How much does 1 meter of 10 mm reinforcement weigh?

Reinforcement a3 6 mm weight 1 meter

• Aluminium, duralumin
• Copper, bronze, brass
• Tin
• Lead
• Zinc

Classes and designations of reinforcement: Maximum deviations of the specific weight of reinforcement are indicated in the reference books of the GOST according to which it was produced. Rebar weight calculator and theoretical weight tables. Most often, the required reinforcement weight table, for example 12, is not at hand, in which case our calculator will help you.

Rebar weight calculator and theoretical weight tables. The weight of the reinforcement calculated using this formula coincides with the nominal values ​​of GOST, but if you select the appropriate class and standard of the reinforcement you are interested in in the calculator, the value will be taken from the table. In real calculations of metal structures, it is worth considering that during the production of reinforcement, deviations in geometric dimensions from the nominal are permissible.

Check with manufacturers for exact information.

Fittings a3 6

The mass of 1 meter is equal to the theoretical mass of a circle of the same diameter, and is calculated using the simple formula m = D * D * Pi / 4 * ro, where ro is the density of the material, in this case 7850 kg/m3, D is the nominal diameter. The weight of steel reinforcement is a reference value; exact values ​​are best taken from the relevant GOST reference books.

Reinforcement a3 6 mm weight 1 meter

see also

• FITTINGS 16 WEIGHT 1 METER TABLE List the items you need in the “Message” field, indicate their quantity. Upon request, it is possible to supply fittings of other lengths. ! Shipment of fittings a1
• REINFORCEMENT 12 WEIGHT OF 1 METER TABLEHaving found out the theoretical weight of a meter of reinforcement, he just needs to multiply this number by the total length of the required metal rods to determine what
• REINFORCEMENT A3 12 MM WEIGHT 1 METERWeight of reinforcement calculator and tables of theoretical mass. Reinforcement classes and designations: The weight of steel reinforcement is a reference value, exact values ​​are better
• REINFORCEMENT A1 WEIGHT OF 1 METER TABLE Table of mass and number of meters per ton of reinforcement according to GOST “DSTU 3760–98” Just below are tables of reinforcement weight. This data will help you when calculating
• REINFORCEMENT 25 WEIGHT 1 METER Maximum deviations of the specific weight of reinforcement are indicated in the reference books of the GOST according to which it was produced. Reinforcement classes and designations:

Source: https://trastmetal.ru/blog/armatura-a3-6-mm-ves-1-metra

Reinforcement weight 10 mm

Reinforcement with a diameter of 10 mm is used for the production of metal structures of various complexity, for the manufacture of parts of various diameters and types, which are used to reinforce reinforced concrete buildings, and are also used in the construction of high-rise buildings and other heavy structures.

Rolled metal has excellent anti-corrosion properties, strong toughness and increased resistance to deformation, loads and cracking. In this case, a thermally strengthened version (AT) and products that are strengthened by hood (B) are distinguished.

Features of fittings

Metal rods are produced in the following forms:

• With a periodic profile or class A2;
• Corrugated type (A3 or A4);
• Smooth shape (A1).

At the same time, reinforcement 10 weight per linear meter forms the cost due to the following characteristics, which play a big role when choosing products for construction work:

• The brand and quality of the metal made (low-alloy steel (or 08g2s), but carbon steel has a different index - ST3);
• The edge pitch of the rods, their class (A240-A1000, A1-A4).

How much does 10 mm reinforcement weigh?

Metal products for the foundation are calculated as the amount of reinforcement in meters. In this case, in the end you receive data that will be useful to you for reinforcing the structure. In industrial production, it is customary to consider such a measure not in meters, but in tons, therefore a linear meter is simply multiplied by a thousand kilograms, and then you get the total cost of the material.

At the same time, you should know that the number of meters in a ton will also depend on the diameter of the reinforcement itself: the thinner the structure itself, the more meters there will be in a ton. At the same time, the weight of 1 meter of 10 millimeter reinforcement, according to GOST data, is 0.617 kg.

Steel products of this diameter are usually used to install strip foundations in country cottages.

Knowing the data on the footage and weight of 10mm reinforcement will allow you not only to get an idea of ​​the expected costs of the work, but will also give you the opportunity to control the activities of your hired team of builders.

You can independently calculate this value only if you do not have a ready-made project estimate, or significant changes have been made to the documents for your project.

Source: http://cheltruba.ru/ves-armaturyi-10-mm/

Armature 12: weight 1 meter

Reinforcement is a combination of elements that bear the main load when working with concrete. Reinforcement is mainly used in various construction works.

These are metal rods that are designed to strengthen reinforced concrete structures. It bears the main tensile and bending loads, due to which the structure acquires strength and reliability and lasts a long time.

By the way, be sure to look at our table of the specific gravity of reinforcement.

Application of fittings

Reinforcing elements are necessary when constructing foundations and walls of buildings made of monolithic concrete. A very important stage in the construction of any structure is the formation of a reinforcement frame for further work.

The weight is regulated by special standards, and a linear meter is one reinforced metal rod one meter long. The weight of the profiles is in relation to the steel reinforcement in diameter. All this data is reflected by GOST.

It is very important that the material is manufactured in accordance with accepted standards, because the stability of the entire structure will ultimately depend on its quality. Therefore, it is better to purchase it from trusted manufacturers who work only with products in accordance with GOST. Moreover, this applies to both steel and composite reinforcement of the new type.  

Clutch nuances

Reinforcement 12, the weight of 1 meter of material in linear meters depends on the shape that a given periodic profile has. The plane of the rod, as is known, can be smooth or grooved.

By the way, reinforcement with a ribbed or corrugated surface provides the best adhesion to concrete. Depending on the production technology used, reinforcing steel can be presented in the form of cold-drawn wire or hot-rolled rod.

The mass of 1 m of hot-rolled reinforcement is not influenced in any way by its main mechanical features . In turn, the latter are divided into six classes based on steel grade and material strength.

What indicators play a role in determining the actual weight of reinforcement? This is a mass of reinforcement frames for a building element, which will subsequently be filled with concrete mortar along the formwork.

Where is fittings used 12

The most commonly used reinforcement is 12 mm in diameter. The most optimal option due to its convenience and ease (relative, of course). However, when connecting the mesh and frame, it acquires the necessary rigidity.

In addition, when working on the construction of country brick houses, the required diameter of the reinforcing mesh for the foundation should be minimal, just 12 mm. Most often, this option refers to a strip foundation for which there is its own reinforcing bond.

To correctly calculate the cost of building a house, you need to know how much reinforcement is 12, the weight is 1 meter. True, such calculations are only needed if there is no house design or if the diameter of the reinforcement mesh has to be changed.

Weight is generally calculated individually for each building and is indicated in special design documentation.

How to calculate the weight of reinforcement

To calculate the weight of metal rods for the entire system, it is necessary to multiply the entire footage of the rods by the weight of the reinforcement in linear meters.

When its full weight is known, you can calculate how much it will cost to purchase at market value. Only here you can’t do without knowing the weight of 1 meter of 12 mm reinforcement. It is quite possible to do this on your own.

But if you have difficulties, be sure to contact professionals in this field or those people who have already worked and have experience in a similar field.

The length of the reinforcement is known (1 m), it is multiplied by the specific gravity of the reinforcement (7850 kg/m3), and then multiplied again by the area of ​​the circle, with the diameter squared.

The following expression is obtained: 1m x 7850kg/m3 x (0.785 x 0.012m x 0.012m) = 0.887 kg. In other words, the reinforcement is 12 mm. 1 m long. Weighs 0.887 kg. And yet, a reinforcement diagram can help you here, which also provides information for the calculations.

By the way, it is even more convenient to carry out all the calculations if you have at hand a special table with calculations of the mass of reinforcement of different diameters. We have such tables on our website.

You can buy reinforcement from specialized companies by weight or by meter in the required quantity. Due to the fact that today reinforcement is used very widely and construction is actively developing on both a large and private scale, there will be no problems with the acquisition of reinforcement.

Deliveries are carried out in small wholesale and larger quantities. Thus, you can order as many fittings as you like for a specific construction. Therefore, it is very important to know how much the reinforcement weighs.

Usually in sales price lists they write how much one meter of material costs, but serious suppliers can also indicate the price per ton.

In any case, having weight figures of 1 m. 12 mm. fittings, there will be no difficulties in purchasing a wide variety of volumes. But in any case, consult with the consultants who sell you this product. With their help, you have the opportunity to order as many fittings as you need.

Source: https://dom-fundament.ru/armatura-12-ves-1-metra.html

A1 fittings - table of weights and assortment according to GOST 5781-82

A1 reinforcement is a type of rolled steel with a round cross-section and a smooth surface. Produced in accordance with the requirements of GOST 5781-82 using hot rolling technology. The main areas of application are the production of reinforcement frames, mounting loops for reinforced concrete structures, plaster nets, enclosures, fences, for the installation of permanent formwork, reinforcement of plaster layers and floor screeds.

Characteristics

In the production of these products, St3 of various degrees of deoxidation is used - boiling, semi-calm, calm. Products made from completely deoxidized steel (calm) are used in critical structures designed to withstand high loads. Rolled products can be heat-strengthened (T) or stretch-strengthened (B).

Main physical characteristics:

• yield strength – 235 N/mm2;
• temporary tensile strength – 373 N/mm2;
• relative elongation – no less than 25%.

Performance properties of steel reinforcement A1 (A240):

• Good weldability due to low carbon steel construction.
• Environmental friendliness. These products have safety certificates indicating their compliance with regulatory requirements.
• Possibility of bending at the angle necessary to create a structure.
• Low resistance to corrosion. Increased by painting, galvanizing, aluminum zinc plating.
• Lower cost compared to periodic profile reinforcement.

Assortment of fittings A1

According to regulatory documentation, products are produced in the diameter range of 6-40 mm. It goes on sale in coils - up to 10 mm in diameter - or rods 6-12 mm long. The weight of products can be determined by the formula M = ρ* l*(π*d2)/4 , in which:

M – product mass, kg;

ρ – average steel density, taken equal to 7850 kg/m3;

π – 3.14;

d – cross-sectional diameter, m;

l – length, m.

Another option for calculating the mass of a batch of reinforcement is using a table from which the mass of 1 m is determined, and then this value is multiplied by the total footage of the batch.

Weight table for 1 m reinforcement A1

Source: https://TreydMetall.ru/info/armatura-a1-tab-vesov

Reinforcement diameter 10 weight

If I understand correctly, then you are not interested in the weight of 10 mm reinforcement in general, but most likely the weight of one meter of reinforcement. This question could be asked in the Yandex PS a little differently: the weight of a meter of reinforcement is 10 mm, the weight of a linear meter of reinforcement is 10 mm, the conditional weight of reinforcement is 10 mm, the specific or theoretical weight of reinforcement is 10 mm, the calculated weight of reinforcement is 10 mm, and so on.

Despite the fact that these questions are formulated slightly differently, in general we are talking about the same thing. In fact, you want to calculate how much the 10 mm diameter reinforcement that you have in stock weighs, or the 10 mm reinforcement that you want to buy, but for some reason, it is not convenient for you to weigh the 10 mm reinforcement on a scale and it is more convenient to turn to reinforcement weight table. Such a table of reinforcement weights is in GOST for reinforcement.

From the table of reinforcement weights, you need to find out the theoretical value of the weight of one linear meter of reinforcement with a diameter of 10 mm.

Weight of reinforcement 10 mm diameter #8212; according to GOST

We did some not very complicated work for you, so that you do not need to download a free table of reinforcement weights or download the entire range of reinforcement, and we found the exact value of the mass of one linear meter of 10 mm reinforcement.

REINFORCEMENT WEIGHT 10 mm #8212; is 0.62 kg per linear meter.

How to use the value you found now: the weight of reinforcement 10 mm in diameter?

In fact, using the table for calculating the weight of reinforcement is very simple and convenient, although it looks somewhat #171;intimidating#187; at first glance. There are quite detailed tables of the weight of linear meta reinforcement . taking into account different types of fittings according to GOST (there are actually three of them). I'll show you with an example. So, for example, you want to buy 25 meters of reinforcement with a diameter of 10 mm.

Perhaps you need to reinforce the foundation for a fence or solve some other construction problem. When selling 10 mm reinforcement, the seller usually sets the price of the reinforcement in tons; it is in tonnage that he buys it at the factory. He sells you 10 mm reinforcement in meters, in linear meters, of which you need exactly 25 m. That is, the price of 10 mm reinforcement per ton tells you absolutely nothing.

In order to somehow convert the number of linear meters of 10 mm reinforcement you have into categories close to: price per ton of 10 mm reinforcement, you need to calculate how much your 25 meters of reinforcement with a diameter of 10 mm weigh. We find line #8212 in the table for calculating the weight of reinforcement; the weight of a linear meter of 10 mm reinforcement (we have already done this for you #8212; see above), opposite shows the weight of a meter of 10 mm reinforcement in kilograms #8212; 22.25 kg.

Now, knowing the weight of one meter of 10 mm reinforcement, we must multiply it by the number of meters #8212; 0.89 x 25 = 22.25 kg. That is, your 25 linear meters weigh exactly 22.25 kg. This is the THEORETICAL WEIGHT OF A METER OF REINFORCEMENT 10 mm in diameter.

Reinforcement weight 10 mm theoretical and actual

But the actual weight of reinforcement 10 mm in diameter and its theoretical weight #8212; these are two different quantities. Unfortunately, the actual actual weight of the reinforcement never exactly coincides with the calculated theoretical weight of a linear meter of reinforcement specified in GOST. There are several reasons for this of a purely technical nature, features of the production of fittings, tolerances within a certain standard, and so on.

Therefore, when selling and purchasing 10 mm fittings, preference is ALWAYS GIVEN to the actual weight obtained when weighed on a scale. Not a single trading organization or company selling fittings will agree with the weight estimate obtained by calculation.

I won’t even mention the specifics of obtaining additional profit when selling fittings with a diameter of 10 mm, due to #171;fine-tuning the scales#187;. This is a separate topic. However, it is reasonable to practice CHECKING THE ACTUAL WEIGHT of 10 mm reinforcement by comparing the scale readings with the calculated or conditional weight of the reinforcement.

This allows you to avoid GROSS MISTAKES and significant overweighting of 10 mm fittings by an unscrupulous seller. You should always check the weight indicated by the seller of the fittings by #171;quick estimate#187; according to tabular data.

Source: https://vsjaarmatura.ru/ves-armaturyi/armatura-diametr-10-ves.html