How to make a hole in a stainless steel sink

Drilling a hole in an artificial stone sink

When purchasing a sink made of artificial stone, the buyer often faces a problem such as the lack of a hole for the faucet. Of course, you should turn to professionals, but you can solve this issue yourself.

In order to understand how to drill a sink made of artificial stone , you must first understand what it is made of. There is no clear definition of “artificial stone”, so different manufacturers use this term for various materials that differ in density and properties.

The most common are:

• porcelain stoneware;
• agglomerate (fragranite, silgranite and their analogues);
• acrylic stone.

Working with any of these materials has its own characteristics. To decide which drill to use to drill a stone sink, you must first understand what exactly was purchased.

The photo shows a porcelain stoneware countertop

Porcelain tiles are the strongest and most durable of the above materials. It is not afraid of temperature and chemical influences, and is resistant to mechanical damage. It stands out due to its ringing “glass” sound.

Other types of artificial stone produce a duller sound due to the addition of plastic and polymer materials. Despite the fact that making a hole in other materials is easier than drilling a porcelain stoneware sink , very often the choice of clients falls on it. Given the extraordinary density of the material, ordinary drills will be powerless here.

Only a crown or a carbide-tipped drill, preferably diamond, can handle porcelain stoneware. Sintered ring drills will also be able to work with it, but their cost is much higher, so they are rarely chosen only if there is a need for a large amount of work. Due to its high strength, when working with this material it is necessary to cool the drill and working surface with water. You need to work with porcelain stoneware at minimum speed (300-400 no more).

Read also: Cerama marazzi - high-quality tiles for the bathroom

Read more about how to drill porcelain stoneware in this material.

Where to cut the hole?

Another important question that will arise regardless of what material the sink was purchased from: should I cut a hole in it from the front after installation? Or should I do this before installation and from the back?

Each method has a number of pros and cons:

1. In the first case, the edges on the front side will be much smoother, but there is a possibility of damaging the front side of the sink with a drill, and if it has a narrow side, then splitting the edge.
2. In the second option, the risk of damaging the bowl is much lower, but there is a possibility of getting a sloppy edge of the hole on the front side. In most cases, this is not critical, since the edges of the hole are closed by the mixer. When turning over, there is a possibility of unintentionally making a hole on the wrong side, so it is advisable to mark the side on which you want to install the faucet.

Nuances of algomerate shells

If you purchased a sink made of stone agglomerate, it will be a little easier to work with.

Agglomerate sink shown

Well-known manufacturers usually include a cutter or core, which is used to knock out a piece of stone that has already been drilled, but not completely. If they are missing, then it is best to use a cutter or diamond-coated crown and proceed as when working with porcelain stoneware.

The Fostner cutter will also cope with a hole in a stone agglomerate product. But be prepared for the fact that after this you will need to sharpen it, or even throw it away completely.

Read also: What is the best way to clean bathroom tiles?

Acrylic stone

If the sink is made as one piece with the countertop and the same color as it, then it is an acrylic artificial stone. Of the above materials, this one has the lowest density, so it is the easiest to work with. If the purchased sink is made of acrylic stone, then you can drill it with ordinary drills for working on metal or wood.

The hole for a standard mixer, in most cases, has a diameter of 35 mm. In a product made of acrylic stone, it can be easily drilled with a feather drill for woodworking or a forstner cutter of a similar diameter. It is necessary to work at low or medium speeds. When drilling this material, a large amount of chips is formed, and the plastic contained in the acrylic stone emits an unpleasant odor, somewhat reminiscent of epoxy glue.

An example of a sink made from this material

Acrylic stone is the most pliable of all types of artificial stone, which is why most countertops are made from it.

If there is a need to make a hole in it for a sink or hob, it is better to first practice in the middle of the cut part so as not to spoil the entire countertop. Despite the fact that acrylic stone can be sawed with a jigsaw without any problems, it is not advisable to make cuts with it.

When working with a jigsaw, so-called stress concentrators often arise (sharp transitions, sharp corners, microcracks), which will affect the service life of the product.

If you are thinking about how to drill a stone countertop, then the best option would be a router , but it is not always available. Look at the prices for milling cutters and you can choose the one that suits you.

In this case, it is permissible to cut a hole 5 mm smaller than required with a jigsaw. After the work with the jigsaw is completed, bring it to a clean size using a cutter. It is imperative to make an R3 chamfer along the edges; it will also reduce stress and increase the service life of the tabletop.

Read also: Restoring bathtub enamel - choosing the best method

More information in this video.

If you are not ready to take on this work yourself, delegate it to experts in your field . The contact form is located at the bottom right. Consultation on issues and cost calculation is free.

Source: http://hopper-time.ru/sverlenie-otverstiya-v-moyke-iz-iskusstvennogo-kamnya/

Kitchen sinks made of composite materials

Kitchen renovations are not done for a year or two, but for a much longer period. Kitchen equipment is purchased with the expectation that it will survive more than one renovation. And in such a choice, its reliability is important. In this article we will talk about sinks made of composite materials for the kitchen.

Kitchen sinks

Installing a sink in the kitchen, especially one installed on or in a countertop, is not an easy task, with many nuances and pitfalls. Agree, I don’t really want to buy and install a sink, and then replace it after a couple of years due to rust or a chip in the coating.

However, there are kitchen sinks that are free from such disadvantages. The manufacturer's warranty on them is from 10 to 15 years of operation. These are sinks made of composite materials.

Sinks made of composite materials

The second name for these types of kitchen sinks is artificial stone sinks. It is the strength and reliability of composite materials that make it possible to apply the epithet “stone” to them.

In fact, a composite material is a polymer mixed with special additives and poured into a sink mold. After the polymer hardens, its properties become close to natural stone in terms of strength. Thanks to special additives and inclusions, the composite sink becomes close to stone in texture and color.

On sale you can find sinks very similar to granite, quartz and marble sinks. For example, in the online store “Metal-San”, website http://metal-san.ru/catalog/kuhonnyie-moyki-i-oborudovanie/kuhonnyie-moyki-iz-kompozitnyih-materialov/. This similarity with natural materials is not accidental. It's all about the technology of making sinks from composite materials.

What types of sinks are made of composite materials?

Composite sinks based on the binder material used for manufacturing are of the following types:

• Acrylic: binder material is acrylic resin;
• Polymer composites: methacrylated polyester resin.
• Porcelain stoneware: the base material is porcelain mass.

According to the filler, sinks can be:

• Quartz: Filler quartz sand;
• Granite: Filler granite chips;
• Granite-quartz: granite + sand;
• Marble: marble chips.

It is important to note here that acrylic sinks are easier to manufacture and therefore cost less.

Differences between sinks made of composite materials

The cheapest type of sinks are acrylic sinks; they are easier to produce. This ease of manufacture (pouring a liquid composition into a mold and then naturally hardening) makes each acrylic sink unique.

However, the uniqueness of the sink, as a plus, competes with the disadvantages: acrylic is afraid of hot metal (pans) and is very easily scratched. Moreover, this is the only type of sink that can be repaired on site.

Composite sinks made of methacrylated polyester resin practically copy natural stone, very durable, varied in color, combined with metal, the widest possible range of shapes, 10-15 year warranty. Disadvantages: expensive price and heavy weight.

Porcelain stoneware sinks are the most durable, with a very long warranty period, but the most expensive and heaviest.

About weight and installation

Speaking about the large weight of a kitchen sink, you need to understand that the method of installing such a heavy sink will only be an overhead one. That is, it will be placed on the countertop in a pre-made hole for the sink. It will not be possible to fit such a sink into a groove in the countertop.

Conclusion

Sinks made from composite materials for the kitchen are an excellent alternative to stainless steel sinks. True, the choice of such a sink is a little more difficult, due to, in principle, simple technology and the possibility of handicraft production.

Source: https://gipsokart.ru/kukhonnye-mojki-iz-kompozitnykh-materialov

How to make a hole for a faucet in a stainless steel sink?

From the author: I am glad to welcome you again, my dear readers! When we renovate a kitchen or bathroom, we are certainly faced with the installation of a sink. For some people, the hole for the faucet in a stainless steel sink becomes a real mystery that is quite difficult to solve. I have repeatedly encountered cases where a person decided on untested methods, thereby simply rendering an expensive product unusable.

One of my friends, who not only did not have special education and skills, but also did not even know how to hold a drill in his hands, decided to make such a hole using a hammer and chisel. Naturally, it turned out to be very crooked, and besides, it was larger than it was necessary. While trying to correct his mistake, he deformed the shell so much that it could not be restored.

Be careful, now I will tell you two ways that will help you solve this problem.

What are the benefits of a stainless steel sink?

I get asked very often why a stainless steel sink is so good. Naturally, installing this item in the bathroom is not aesthetically pleasing, not practical, and generally not entirely normal. To decorate this part of the apartment, it is best to use specimens made of artificial stone.

Installation of the product discussed is more appropriate as part of a kitchen renovation project. An alternative could be a product made from quartz, but not everyone can afford it.

Let us highlight the advantages of steel samples:

• price. The most important thing when performing repair work is rational savings. Yes, if the budget doesn’t bite you and you can afford a more aesthetic product, do it,
• mobility. More than once, even I have encountered moments when a new sink was installed, and the old one was sent to another place for service. For example, to the country house. The issue of removal and re-installation in this case is more convenient,
• reliability. Not every housewife can boast of being careful when working in the kitchen. She can drop something heavy at any moment, and if it is a cast-iron cauldron and it falls on marble, then a crack in the latter is guaranteed. On the steel sink, only a small dent will remain, which can be easily removed with a regular hammer and a wooden block, and the scratch can be covered with special means so that it will not be visible at all.
• it does not need to be embedded into the countertop. This way you can optimize its use and not pay extra when ordering the kitchen itself.

From the above, it becomes clear that a stainless steel sink is the optimal, and most importantly, budget option for the average resident of our country.

Let's use a drill

You can make the necessary hole using a power tool, which every self-respecting owner should have at home. An ordinary electric drill must be equipped with a specialized attachment, which is designed for working on metal. This point is very important, since using a drill with a pobedite tip or diamond coating will simply render it unusable, and there will be no result.

The nozzle is something similar to a compass. If you ask the appropriate question at a construction hypermarket, they will kindly provide you with the necessary product. Let's describe the process step by step.

1. First of all, decide on the place where the mixer will be located. In order to understand whether pouring water will splash onto the walls of the kitchen, simulate the pressure using a filled plastic bottle.
2. Next, you need to create a small hole that will serve as the center point of the cut circle. To do this you will need a metal drill. Arm yourself with it and follow the procedure.
3. Change the nozzle and install it exactly in the place that we created in step No. 2. Before you start drilling, set the desired diameter.
4. Drill a hole.

Just four simple steps solve the problem with a bang!

There is also a special tool that allows you to do the same job, but using your physical strength. It is called "Fixa" and consists of two cylindrical bases connected by a bolt. One of them is sharpened in such a way as to create a standard hole for a faucet.

A little secret

When I worked as a salesperson in a construction hypermarket, the guys from the plumbing department were supposed to provide the service we are talking about for free. However, given that this needs to be done for free, not everyone advertises it. Remember that when purchasing a sink, you can take advantage of the additional functions of a sales assistant!

I am sure that my advice was useful to you, and there will be no problems completing the task!

Source: http://PechiStroy.ru/remont/kak-sdelat-otverstie-pod-smesitel-v-moyke-iz-nerzhaveyki.html

Hole for faucet in kitchen sink

Currently, there are many models of sinks that have a symmetrical shape. Such sinks are extremely convenient, as they can be installed on both the left and right sides.

Some models of modern faucets: a – kitchen sink faucet; b – kitchen sink faucet with shower net on a flexible hose.

In order for the sink to be installed on any side, during manufacturing there is no outlet for the mixer.

It is assumed that a hole for a mixer of the required diameter will be made immediately before installing the plumbing. On the one hand, this is very convenient, because it is not always possible to choose a sink with ready-made outlets due to discrepancies in parameters.

Single hole kitchen sink faucet: drawing.

Most ready-to-install kitchen sinks have a factory outlet of 32mm, while the faucet diameter can be over 34mm. Currently, versions of sinks without a ready-made outlet are produced in both stainless steel and ceramics. For many, making a hole of the required diameter may seem like an impossible task, but in this case there are a number of measures that can be taken.

In some points of sale of such sinks, it is quite possible to use the services of specialists: they will select the outlet for the mixer of the required diameter, and will do everything using special tools. But such services are not provided everywhere, and owners of sinks without a ready-made outlet for the mixer will have to make it themselves.

It’s worth saying right away that you can only make a neat hole yourself in stainless steel, while experimenting on a kitchen sink made of granite or ceramics is fraught with risk, as the material may crack.

Work on the manufacture of communication outlets in a ceramic sink must be carried out as carefully as possible so as not to spoil the appearance of the sink.

If possible, you need to purchase tools: for stainless steel, special cutters for making holes are sold; for ceramics, it is best to use diamond-coated drills.

It will not be possible to drill ceramic plumbing fixtures with a conventional drill, as the ceramics will simply crack. However, it is quite possible to get by with some available means, but you need to act extremely carefully.

Hole for faucet in stainless steel sink

Diagram of approximate dimensions of a kitchen sink.

There are several proven ways to drill a straight hole in stainless steel. It’s worth noting right away that you cannot make an exit for the faucet in already installed plumbing fixtures, since due to the support on the countertop, there is a possibility that the plumbing fixtures will crack. Before carrying out work, you need to turn the sink upside down so that all its edges rest on the surface of the table, and only then begin work.

If you have the opportunity to purchase or rent a special cutter for making holes, the work will not be difficult. First of all, you need to make the initial hole using a drill and a 10 mm drill bit.

Next, the cutter screw is inserted and tightened with the help of 2 keys, so it turns out that the metal is compressed from 2 sides and pressed through using a press. The diameter may vary depending on the type of cutter used.

If it is not possible to purchase a special device, you can resort to other methods.

So, in order to make an outlet for communications of the required diameter in a stainless steel sink without the use of special tools, you will need the following tools and materials:

Diagram of a kitchen faucet.

• marker;
• mounting tape;
• hammer;
• round file;
• center punch

In order for the diameter to correspond to the standard, first of all it is necessary to make a circle of the required size and shape from the mounting tape. The cut circle must be attached to the selected location under the mixer and circled with a marker in order to subsequently cut out a smooth hole.

In addition, you need to mark the center to make the initial hole with a center punch. The tip of the center punch should be directed to the center of the circle of mounting tape and lightly tapping to punch out the initial hole. If you have a drill, you can drill with it.

Next, the initial hole must be expanded with a round file to the previously marked boundaries.

Simply drilling an outlet for the faucet in a stainless steel sink is not enough, since the edges may turn out crooked, and aligning them later will be very problematic. Once you have an exit for the mixer of the required diameter, you need to carefully sand the edges of the cut, then you can begin installation. To prevent further oxidation of the metal, the edges of the fresh saw cut must be treated with a sealant. After it hardens, you can begin installing the sink.

You may also find these articles useful:

Source: http://mvkursk.ru/oformlenie-doma/otverstie-pod-smesitel-v-kyhonnoi-moike.html

Diameter of the hole for the faucet in the sink

Sinks made of artificial stone do not always have a special cutout, so there is a need to make a hole in the sink yourself. A common obstacle is the fear of damaging or crumbling the sink. Although artificial stone is close in properties to natural stone, in essence it is more like plastic: or, better said, like a polymer mass mixed with stone chips.

Drilling Precautions

The ratio of resin to stone chips can be very different. Regardless of the proportions, this material lends itself better to a drill than stone. However, you should still be careful and cautious. A sink made of artificial stone requires careful handling: it is not recommended to carry out any work until its temperature reaches room temperature.

How to avoid mistakes

Let's say you decide to make a hole using a drill with a cutter.

Often, experts make a hole when the sink is already installed in the countertop. This solution has only one advantage - the edge on the front side will be smooth. But it has many more disadvantages: you can scratch the stone, damage the sink, chip the edge, and so on.

Therefore, it is better to drill a hole from the back. But there is a possibility that the hole will have an uneven appearance from the outside. However, a mixer will be located in this place, which will cover the uneven edges. There is no risk of damaging the front side of the sink.

There are two fundamentally different methods of work. The first involves working with a drill, and the second involves knocking out the weakened cast plugs provided for by the design. Let's consider each of them in order.

Drilling a hole

We make a hole in the artificial stone sink using a drill step by step:

Punching a hole in the sink

Some artificial stone sinks have cast plugs that are knocked out during installation. They are usually color coded on the front. First of all, the sink is installed in place in the countertop, but is not fixed.

Then you need to choose the right tool and beat off the plugs with a strong blow with a hammer. A punch with a diameter of 8 mm is suitable for this role, but not a screwdriver. You only need to knock out the cork from the top: that is, from the front side. Use a rasp to smooth out the uneven edges of the hole.

Using this method, you can make a hole for the mixer.

1. The center is outlined and the circle is drawn.
2. Using a drill, holes are drilled along the circumference, the distance between which is 4 mm.
3. To prevent cracks from appearing when knocked out, firmly fix the sink.

If there is a need to increase the radius of the hole, you need to draw another circle of the required size. All cuts are made from the same front side along the circumference at a distance of 4 mm. Using a punch or chisel, remove unnecessary parts.

Source: https://trubytruby.ru/raznoe/diametr-otverstija-pod-smesitel-v-mojke.html

How to install a kitchen faucet - My site

The faucet is integral to the kitchen sink and the work involved in installing the sink includes installing the faucet on the sink. Read about options for installing a faucet in a kitchen sink in this article.

Two options for installing the mixer

There are two fundamentally different options for installing a sink mixer. These options for the selected sink differ, or more precisely, whether there is a hole in the sink for installing a mixer.

In the next two photos we see two different types of kitchen sinks. The first sink has a standard diameter factory hole for installing a faucet. The second sink does not have such a hole. This means that you can make a hole for the faucet yourself or install the faucet on the countertop next to the sink.

faucet on the sink faucet on the countertop

The option of drilling a hole yourself is possible, but has a number of disadvantages. First of all, in the place of the factory hole for the faucet, manufacturers of metal sinks strengthen the sink.

Thanks to this, the mixer stands firmly on the sink and does not “play” with the metal. If you drill a hole yourself, the mixer may vibrate after installation.

In addition, drilling the sink yourself will damage its anti-corrosion coating at the drilling site.

Therefore, if there is no hole in the sink, then the mixer is placed on the countertop. In the photo we see options for installing a mixer next to the sink.

Stages of installing a faucet on a sink

The mixer is installed on the sink before it is installed on the countertop. It is more convenient and technologically better.

Connecting the mixer to the water supply is carried out after installing the sink with the installed mixer on the countertop or kitchen cabinet. It is better to assemble the mixer on a comfortable surface.

For assembly, prepare the mortise sink itself, a faucet with an installation kit and a flexible hose. The installation kit is included with the mixer and includes:

• Gaskets;
• Fastening washer;
• Studs (stud) fastenings with nuts.

Related article: 4 types of water faucets for the kitchen

This is the most common option for attaching the faucet to the sink, which can be called standard.

Important! Faucets vary in how they are connected to the water supply. Here I show a mixer with a connection option through a flexible connection (connection hoses), which are screwed to the mixer separately.

There are options for faucets on sale with factory-installed permanent connection hoses. When purchasing them, you need to take into account that it is impossible to repair such mixers if the connection hoses are damaged.

Faucets with removable connection hoses also have a drawback. Faucets are sold complete with short hoses. Usually they have to be changed to longer options, NOT 15 cm, but 30-40+ cm. This makes it more convenient to connect and easier to maintain.

The flexible hose is screwed to the faucet before installing the faucet. There is no need to wind the flax under the thread.

To tighten the liner at its end there is a hexagon for an open-end wrench No. 10. The tightening must be done with a slight increase in order to avoid cracking the gaskets on the hose.

After attaching the hose, screw the fastening sleeves into the mixer body (if they are included separately and not assembled at the factory).

After assembling the mixer, it is installed in the sink hole. Don’t forget to install the gasket between the sink and the mixer, which comes with the mixer. The gasket can be pressed into the mixer body.

On the back side of the sink, we put a special gasket and a washer of the same profile on the mounting bushings. Next, screw the faucet to the sink with nuts, tightening the nuts until they stop.

Installation of the faucet on the sink is completed

To ensure that the fastening does not weaken over time, we fix the first nuts with second nuts, which are not included in the mixer kit and must be purchased in advance.

The result of the installation should be a strong fastening of the mixer, it should not wobble, the liner should be on the mixer.

Next, the sink is placed on the countertop, as in the article: Installing a mortise sink with your own hands with a bulkhead of the lower kitchen cabinet

Related article: Suspended ceiling Grilyato

Stages of installing a faucet on a countertop

In this option, the sink can be placed before or after installing the mixer on the countertop. There is no difference, it all depends on ease of access.

A hole for the mixer with a diameter of 35 mm is pre-drilled in the countertop. The thickness of the countertops is 28 or 40 mm, and the length of the faucet mounting pins is 100 mm, so they should be enough to secure the faucet to the countertop.

conclusions

Installing a faucet on a kitchen sink with your own hands does not involve any big problems. Especially if the connection is made through a flexible hose. It is much more difficult to change the faucet on an installed sink or connect the faucet to a rigid connection. More on this in the following articles.

5 steps to install a faucet in the kitchen yourself

So, you bought a faucet to replace an old one or to equip a sink with a new set and decided to take on the installation yourself. On the one hand, connecting and installing a faucet on the sink with your own hands is very simple - anyone can do it.

On the other hand, even having some experience, but not knowing the basic rules, you can do the work poorly or completely ruin the product, for example, by knocking off the thread, bending the connections, etc. Another reason why you still have to contact a plumber is this is the lack of a set of plumbing tools.

But this problem is completely solvable, because you can always ask your friends for something.

We tried to explain as clearly as possible how to install a faucet in the kitchen with your own hands, reliably and correctly.

List of required tools and spare parts

Before you begin installing kitchen plumbing with your own hands, you need to prepare and purchase everything you need. You will need:

1. FUM sealing tape - it’s better not to use flax tow, as it swells with water, and then it will be difficult to remove the liners;
2. Open-end wrench 10 or 11;
3. Tubular wrench – needed to tighten a hard-to-reach nut when installing the faucet to the sink;

1. Installation kit - it should contain rubber O-rings, that is, half washers (2 pcs.), one horseshoe-shaped metal half washer, a stud (1 or 2) and a nut. This set is included with the mixer, but if you wish, you can buy a thicker and stronger O-ring, since manufacturers do not always include high-quality gaskets in the kit;

1. Pliers, a small wrench, a screwdriver - sometimes these are also needed;
2. A rag, a basin and a flashlight will also come in handy so that you can see everything;
3. And finally, the main thing - 2 plumbing connections - are included in the kit, but it is better to buy others, since the factory ones are often short and made of silumin;

Perhaps it’s worth paying attention to the eyeliners. Keep in mind that:

• The eyeliners need to be of such length that they do not break, but bend in the form of a semicircle, that is, they should not be too long or, conversely, short when tight. The most common length is 86 cm;
• If the factory eyeliner is too short, then it is better not to try to extend it, but to buy a new one;
• In addition, do not buy silumin hoses, especially if you bought a silumin mixer - at least the connections should be reliable;
• Installation of flexible hoses is easier than connecting rigid ones, but they are considered less reliable, so it is better to install them together with tap taps;
• The set of eyeliners must include gaskets;
• Replacing an old faucet in the kitchen most often involves replacing the old connections, because they also wear out.

Step 1. Dismantling the old mixer and preparing for installation

Before installing a faucet in the kitchen, you need to turn off the water (there is no need to turn off the riser) and, just in case, put a rag on the bottom of the sink so that small parts do not fall into it, and large parts do not damage it.

Of course, replacing a kitchen faucet requires dismantling the old faucet. To do this you need:

• First, disconnect the old hoses from the cold and hot water pipes by hand or with an open-end wrench. Do not forget to place a basin under them and drain all the remaining water, after which the threads of the pipes must be wiped clean.
• Then, using a tubular wrench, you need to unscrew the clamping nut on the stud (or two studs), which secures the faucet to the sink (right under it). When you unscrew this nut, the metal half washer will also come off.
• Now you need to pull out the mixer along with the hoses from the sink hole. Well, that's all, you can proceed to the next step.

Step 2. Assembling the mixer and connections

Installing a faucet in the kitchen begins with its assembly, that is, with connection to flexible hoses or rigid connections.

• If you have a two-handle mixer like the one in the photo on the right, then most likely you need to assemble it first. To do this, insert the spout (faucet) into the body up to the restrictive ring and manually, without tightening it too much, screw them to each other.

Now take the FUM tape and wrap it a little around the end of the eyeliner.

• Wrapping tape around the tip is not necessary since the hose already has a gasket.

Then we insert the end of the first line into the corresponding hole in the mixer as in the photo below and screw it on first with our own hands, and then slightly tighten it with a 10-mm open-end wrench. Screw on the second hose in the same way.

• It is very important not to tighten too much, otherwise the lining will be damaged! But not making it is also bad.

And finally, screw the pin-pin (or 2 pins) with the thread up into the hole provided for it. Our assembled faucet is almost ready for installation. All that remains is to thread both hoses into the o-ring, bring it to the base of the mixer body and secure it there as shown in the photo on the right.

Step 3. Install the faucet on the sink

Now it's time to put the faucet on the sink.

• By the way, it is more convenient to install the faucet on a sink that is not yet built-in, since it is not very convenient to work by climbing under the countertop (in this case, installation is done this way).

We insert the ends of the hoses into the mounting hole of the sink, place the mixer and ask someone to hold it so that you are comfortable.

Source: http://tvoijisnb.ru/kak-ustanovit-kuxonnyj-smesitel.html

How to cut a hole in different types of sinks

The lack of holes for taps or mixers in modern sinks is not a defect, but a necessity. Installation technologies for such products require a couple of positions for the sink itself.

The product line offers a couple of basic diameters for plumbing fixtures - try to guess which one you need! We won’t guess, we’ll install it.

Two types of sinks

The most popular at the moment are two types of kitchen sinks:

• Stainless steel sinks;
• Porcelain stoneware products.

With both stainless steel and porcelain stoneware, manufacturers are in no hurry to drill holes, leaving these little details to the sellers.

For your information! It is possible to agree on drilling holes in sink sales stores. The price of the manipulation is up to you, show the location and diameter, pay and purchase the finished product with places for installing taps and mixers.

The trouble has been resolved, and it is possible to close the topic under discussion, but there are situations that radically change the original intentions. Moreover, the desire to do everything with your own hands, and the pleasure you get from a job well done, is incomparable.

Independent work

Simple things can change the world. The initial desire to install the tap on the right side in the corner will be nullified if your wife is left-handed.

On a note! In the kitchen, more than anywhere else, great importance is given to beauty, functionality, and also ergonomics. Left-handed people find it very uncomfortable to open the tap on the right with their left hand. Water gets on your hand.

We recommend that you first place the sink in place, take a closer look, and then decide and choose places for the nests. Have you decided to do the work yourself?

Our instructions:

1. Carry out all work on the product before installing it in a permanent location; with these simple steps you will prevent premature damage and deformation of the item;
2. Place the sink horizontally on a wood base. Drill a small hole with a metal drill, enough 5-6 mm to locate the center of the circle;

Advice! If you use a hammer and punches, then the above manipulation is not necessary.

1. And then there are three paths to choose from:

• punch and hammer. Here you pierce the easily secured bowl with special nozzles manually, the nozzle is initially selected to match the diameter of the hole in the sink for the mixer or faucet;
• Punch of a special design. This is a mechanical toy that uses the squeezing method. Such a punch consists of a threaded pin and two nozzles, a pressing washer and a tap with a wrench head. By installing the pin into the hole from the outside, screwing on the washer with the head, you use a wrench to tighten and press. The result of this manipulation is a hole in the stainless steel sink for the mixer;
• The third way is a special drill called a carrot. The name has stuck so well that, in addition, on the factory packaging of the product it is otherwise not referred to as a carrot drill. The drill is presented as a cone, with a cutting edge diameter from 6 to 32 and 38 mm. We will not outline the principle of using a drill, everything is clear.

To the piggy bank! From time to time, the consumer's choice stops at mixers with cups of enormous diameter. A sink siphon with a huge hole requires a huge seat. Then there are a couple of options: the first is to order a hole in the store, the second is to drill a pair of holes of a smaller diameter around the circumference. After that, put them together, removing the inner circle with a chisel. Indeed, precision and accuracy of movements will be required.

How to drill a hole in a stainless steel sink - we've sorted it out, let's move on to the stones.

Stone and under stone

Much more interesting is the topic of drilling sockets in stone sinks.

What are we doing?

• At the location of the proposed hole, we make a mark and drill;

Note! A simple manipulation—working with a drill—is not overly complicated in practice. A drill with a pobedit insert is contraindicated for this work; it doesn’t drill so much as it chips and peels the material. The metal drill has proven itself well, but low speeds of the drill itself are needed (in the ideal case, it is better to use a hand drill). At high speeds, the edges melt.

• During drilling, the material can heat up quickly, but this is difficult to control. Drilling a hole in a sink made of non-natural stone is best done with a narrow drill. We work around the perimeter of the entire future nest;
• It is recommended to “pass” the partitions between the holes using two methods:
• We cut the strokes with an electric soldering iron, followed by knocking out the plug with a hammer;
• The material can be cut well with a jigsaw. Despite the fact that this process is longer, the edge is the smoothest;
• Grinding the hole circumference is done using a round abrasive attachment for the entire circumference. If you don’t have one on your farm, use a simple round file.

To the piggy bank! It is also possible to drill a hole in a sink made of non-natural stone with a diamond drill, if you have one.

We inform you! Some bowls have special marks. These are places where, by striking accurately with a hammer, it is possible to punch a hole. This must be done with caution; the tags themselves are marked with paper stickers, which can slide off during transportation. A blow to another point can only lead to destruction of the material.

Finally

We have covered the topic of how to cut a hole in a sink for a faucet. It remains to watch the video in this article for a complete presentation and visualization of the process. But if you are not sure about the investigation, it is better to contact the experts.

Source: https://uchebniksantehnika.ru/kanalizatsiia/kak-prorezat-otverstie-v-raznykh-vidakh-rakovin.html

How to embed a sink without a template

Hello, dear reader of bokovina.ru! Finally, I took a series of photos that reveal the secret of cutting the sink into the countertop without requiring a template. I am more than sure that you will easily cope with the task after reading this article.

We throw the template out of the packaging and let amateurs use it. Now you will learn how experts in their field mark the tabletop. There are a few important points you should consider:

• Tabletop overhanging cabinet
• The width of the wall plinth.
• The width of the sink cabinet.

Then we turn our basin over and place it on the countertop, taking into account the above nuances. You should definitely invite the hostess, show her the boundaries of maneuvering and ask her to make the final choice.

Otherwise, if she doesn’t like the location of the sink, she will have to buy a new countertop. When all the wishes of the female half have been taken into account, we outline the dimensions of the sink with a pencil or a thin marker, depending on the color of the countertop.

Within walking distance of you, there is a service for calculating cabinet furniture.

Sink insert

We need to insert a jigsaw into this circle; to do this, we select from our arsenal a drill with the largest possible diameter. And we make a hole, retreating inside the circle from the line, at least 16 mm. Read on and you will understand why.

It is necessary to draw the marking line not along the jigsaw file, but along the inner edge of the jigsaw sole. The distance from the file to the edge of the inner sole of the jigsaw is equal to the distance from the edge of the sink to the sink lock. That is, this is the necessary side that the sink holds on to.

By the way, to prevent the table top from falling on your feet, you need to tighten black self-tapping screws to any length along the cut line. Although being at three diagonal points. And then you won’t need a third hand and your legs will be intact.

Moisture protection

Having first checked the cutout for unhindered entry of the sink and degreased it with acetone. apply silicone. Having protected your finger with a glove, carefully rub the silicone into the end, not sparing it. We make a silicone ring along the edge of the cut to prevent moisture penetration.

Within walking distance of you, there is a service for calculating cabinet furniture.

Preparing the sink

Sink manufacturers have not yet learned how to make high-quality self-tapping screws, and I don’t think they will learn soon. If this happens at all. Therefore, difficulties constantly arise during fastening. If they are not replaced with black PH thirty.

We carefully put on the locks. Be sure to glue the seal if the sink is not crooked. We pull in the mixer with the hoses already screwed on. We install an elbow to drain the water and only then secure the sink with locks. Do not under any circumstances overtighten the fasteners.

How to install a faucet into a stainless steel sink

• Two types of sinks
  • Independent work
  • Stone and under stone
• Finally

The lack of holes for taps or mixers in modern sinks is not a defect, but a necessity. Installation technologies for such products require several positions for the sink itself.

The product line offers several basic diameters for plumbing fixtures - try to guess which one is needed here! We won’t guess, we’ll install it.

Photo is a problem that we have to solve.

The most popular types of kitchen sinks now are:

• Stainless steel sinks;
• Porcelain stoneware products.

With both stainless steel and porcelain stoneware, manufacturers are in no hurry to drill holes, leaving these little details to the sellers.

The sinks are different, and so are the appliances.

Please note! In sink sales stores you can arrange for holes to be drilled.

The price of the manipulation is negotiable, you indicate the diameter and location, pay and receive the finished product with places for installing taps and mixers.

The problem has been solved, and this topic can be closed, but there are situations that radically change the original plans. Moreover, the desire to do everything with your own hands, and the pleasure that you get from a job well done, is incomparable.

Independent work

Simple things can change the world. The initial desire to install the tap on the right side in the corner will be nullified if your wife is left-handed.

Note! In the kitchen, like nowhere else, great importance is paid to beauty, functionality, and also ergonomics. It is very inconvenient for left-handed people to open the tap on the right with their left hand.

Water gets on your hand.

You can press out a hole.

We recommend placing the sink in place first, taking a closer look, and then deciding and selecting nest locations. Have you decided to do the work yourself?

Our instructions:

1. Carry out all work on the product before installing it in a permanent location; with these simple steps you will prevent deformation of the item and premature damage;
2. Place the sink horizontally on a wooden base. Drill a small hole with a metal drill, enough 5-6 mm to locate the center of the circle;

Advice!
If you use punches and a hammer, then the above manipulation is not necessary.

Carrot drills and their capabilities.

1. And then there are three paths to choose from:

• Hammer and punch. Here you simply pierce the fixed bowl with special nozzles manually, the nozzle is initially selected to match the diameter of the hole in the sink for the mixer or tap;
• Punch of special design. This is a mechanical toy that uses the extrusion method. Such a punch consists of a threaded pin and two nozzles, a tap and a pressing washer with a wrench head. By installing the pin into the hole from the outside, screwing on the washer with the head, you use a wrench to tighten and press. The result of this manipulation is a hole in the stainless steel sink for the mixer;
• The third way is a special drill called a carrot. The name has taken root so much that even on the factory packaging of the product it is not called anything other than a carrot drill. The drill is presented as a cone, with a cutting edge diameter from 6 to 32 and even 38 mm. We will not describe the principle of using a drill, everything is clear.

Punchers included.

In the piggy bank! Sometimes the consumer's choice is on faucets with glasses of large diameter. A siphon for a sink with a large hole requires a large seat. Then there are several options: the first is to order a hole in the store, the second is to drill several holes of a smaller diameter around the circumference. Then simply connect them together, removing the inner circle with a chisel.

True, accuracy and precision of movements will be required.

How to drill a hole in a stainless steel sink - we've sorted it out, let's move on to the stones.

Finally

We have covered the topic of how to cut a hole in a sink for a faucet. All that remains is to watch the video in this article to visualize and fully present the process. However, if you are not sure of the result, it is better to contact specialists.

Source: https://potolki-72.com/kak-vrezat-smesitel-v-moyku-iz-nerzhaveyki/