How to clean gold with ammonia

How to clean gold at home

When worn, gold jewelry often becomes dull and becomes coated. Various means help restore them to their original appearance. You can buy professional cleaners in jewelry stores, but household methods also come to the rescue.

To clean gold at home, you need to follow these rules:

1. The container for the products is taken so that it does not oxidize during cleaning. It can be plastic or glass. The dishes are chosen to be deep so that all the decorations fit into it.
2. When soaking, the gold should be completely covered with the solution.
3. The mechanical cleaning method is used in exceptional cases when other methods have proven ineffective.
4. If the gold is below 585, it will not be cleaned with a soap solution.

There are many traditional ways to clean jewelry.

Hydrogen peroxide

To make gold shine, use a special solution, which is prepared from the following components:

• hydrogen peroxide - 50 ml;
• heated water - 200 ml;
• ammonia - 1 tsp;
• softening liquid soap - 1 tsp.

All ingredients are mixed. Get a product into which the gold jewelry is dipped. Keep it for a quarter of an hour, take it out and polish it with a soft cloth.

https://www.youtube.com/watch?v=Ko7YJJ6h9I0

Another method will require the following ingredients:

• hydrogen peroxide - 3 tbsp. l.;
• baking soda - 2 tbsp. l.;
• water - 250 ml.

Everything is combined, and the jewelry is placed in this liquid overnight. In the morning they are removed, wiped, dried and rubbed with a napkin until shiny.

Ammonia

Ammonia is often used to clean gold. This is the best remedy to help rid products from oxidation. Cleaning methods:

1. Pour 2 tsp into a pan of heated water. shampoo and 0.5 tsp. ammonia. Gold is dipped into the solution. After 15 minutes, it is taken out and placed on a napkin to dry.
2. In this case, ammonia with a higher concentration is used. Fill a container with this product and place gold jewelry there. How long they will lie there depends on the degree of contamination of the metal. In difficult cases, the products are kept overnight. In the morning, take it out and dry it.
3. The next method will require washing powder and ammonia. Pour boiling water into a glass container and add 1 tsp. ammonia and add 1 tbsp. l. powder. Jewelry is placed in the resulting solution for 1 hour.

Ammonia can remove any contaminant, but does not always cope with black oxidation. In this case, only mechanical cleaning can help.

Ammonia

There are different ways to clean gold with ammonia. The most effective include the following:

1. Using ammonia in its pure form. Use it to generously moisten a cotton swab and wipe the gold with it. Then the jewelry should be washed under running water.
2. To get rid of light contamination, take 1 tbsp. l. alcohol and 200 ml of water, mix. Valuable items are immersed in the resulting product for 40 minutes.
3. Use 2 tbsp. l. washing powder, 200 ml water and 1 tsp. ammonia. All ingredients are mixed. In this solution you can clean a gold ring with stones. This product can get rid of old stains.

Cleaning white gold jewelry with ammonia is prohibited.

Soda

There are many ways to brighten jewelry using baking soda.

Boiling method. To do this, take 2 tbsp. l. soda and 200 ml of water. The bottom of a metal pan is covered with a soft cloth and gold objects are placed on it. Pour soda into a glass of water, mix and pour into a saucepan. Place it on low heat and boil for 30 minutes. Then the products are removed, washed and dried.

Objects made of such metal can be boiled in a solution, for the preparation of which you take:

• sodium salt - 2 tbsp. l.;
• water - 200 ml;
• detergent - 1 tsp.

Place a soft cloth in an even layer in a metal dish and place the product on it. Prepare a solution by mixing these components. Fill a container with this liquid, place it on low heat and boil for 25 minutes.

Salt

Ordinary salt helps to brighten gold. To obtain a cleaning solution, dissolve 3 tbsp in 100 ml of water. l. salt. Valuable items are placed in it overnight.

Dishwashing liquid

Gold items can be brightened well with dishwashing detergent. To prepare the solution, add 1 tsp to a glass of water. substances. Cover the bottom of the pan with a cloth, pour in the resulting product and place the decorations there. Boil for 20 minutes. Then the products are rinsed and dried.

Sugar

Thanks to sugar, gold jewelry regains its former shine. Place 2-3 tsp in a glass of water. sugar and stir. Gold objects are placed in the liquid and kept overnight. In the morning they are taken out, washed and wiped dry with a napkin.

Cleaning gold with foil

You can soak the products in a soda solution with foil. To prepare it you will need:

• soda - 3 tbsp. l.;
• salt - 2 tbsp. l.;
• water - 200 ml;
• foil - 30x30 cm.

The bottom of the glassware is lined with foil and gold objects are placed on it. Place salt and soda in a glass of boiling water. The resulting product is poured into gold and left for 10 hours. Then the products are taken out, washed and dried.

Professional gold cleaning products

Gold cleaning can be done using professional means. This can be paste, aerosols, liquid solutions. This procedure does not harm the jewelry. The most popular means include the following:

1. "Aladdin". This is a specially developed product for cleaning gold items. It can be in the form of paste, polished napkins, solutions. Eliminates plaque, dirt, oxidation. If you strictly follow the instructions, any damage to jewelry is excluded. Gold brightens within 2 minutes.
2. Town Talk. This is a liquid for cleaning gold jewelry. To rid jewelry of dirt, place it in this solution for 1-2 minutes, and treat hard-to-reach places with the brush included in the kit.
3. "Asidol-M". This is a liquid containing abrasives, surfactants and additives. Helps get rid of dirt and oxidized film. Apply the product to a dry surface, hold for 1 minute, after which the decoration is wiped with a soft cloth.

There is a special device that helps clean jewelry with ultrasound. The bath is made of plastic and is closed with a transparent plastic lid. Through it, the purification process is observed.

The device works as follows: pour water into the bath container, put jewelry there and turn on the device. Small bubbles appear and begin to burst, creating a sound pressure effect.

This is how ultrasound cleans gold from impurities. The process lasts 3 minutes.

Cleaning gold with diamonds and other stones

If the jewelry contains precious stones, the item must be cleaned with extreme care. Many gems and minerals are damaged not only by interaction with alkalis and acids, but even with ordinary water. Therefore, you need to adhere to the following recommendations:

• It is prohibited to wash gold with stones using abrasives or to clean with hard brushes;
• topaz and emerald should not be rinsed with hot water;
• opal, amethyst, garnet are treated with a soft brush and soap solution;
• moonstone, tourmaline, turquoise are not cleaned with a special device;
• ammonia and soap solution are used to clean diamonds;
• chrysolite must not be cleaned with acid, and even lemon peel cannot be used;
• Pearls and turquoise can be damaged by high temperature, ultrasonic exposure and chemical agents.

We clean gold and cubic zirconia with washing powder or ammonia. Toothpaste that does not contain abrasive particles is allowed. Any of these products are applied to the item and gently brushed with a toothbrush. Wash under water and polish stone and metal with flannel.

Gold and diamonds are washed in a solution of soap shavings, cleaned with a brush and treated with ammonia. You can soak this decoration for half an hour in an ammonia solution (1 teaspoon of the substance per glass of water). Rinse with water and polish with flannel.

How to clean white gold

If white gold is heavily contaminated, use the following methods:

1. The decoration is soaked in a solution of soap shavings for 20-25 minutes. Then the gold objects are removed and cleaned with foam rubber. Wash and wipe with a flannel or woolen rag.
2. Toothpaste is used, which is applied to the surface of the product and treated with a brush to clean the teeth. The gold is washed and dried.
3. If the jewelry is with a diamond, use ammonia. A rag is soaked in it, the jewelry is wiped and washed with water. Use a soft cloth for polishing.
4. White gold can be cleaned with cosmetic lipstick. Thanks to this product, the decoration acquires shine. Polish the product with a flannel or woolen cloth.
5. You can soak gold in a cleaning solution, for the preparation of which you take white chalk and ammonia. This gold cleaning product is used for the most stubborn stains. 6-8 drops of ammonia and a small amount of chalk are added to 100 ml of water, and gold objects are dipped into this liquid for half an hour. Then the products are cleaned and wiped.

The latter method is prohibited if white gold is decorated with turquoise, moonstone, or opal.

How not to clean gold

Gold cannot be cleaned:

• bleach, which causes the metal to tarnish;
• vinegar and potassium permanganate - they oxidize the surface;
• iodine - it colors gold.

If the product contains stone, do not use acids or vinegar. It is contraindicated to clean such jewelry with a rough brush or wet it with water. White gold should not be cleaned with a brush or toothpaste.



Source: https://uborka-v-dome.ru/pravila-chistki/kak-pochistit-zoloto-v-domashnih-usloviyah.html

Useful tips for cleaning gold at home

How to clean gold at home, with peroxide, iodine, alcohol? This is a very pressing question that is asked by representatives of the fair sex who have jewelry made of precious metal. The thing is that it is a fairly soft metal, and to make it stronger, alloys (metals that make it stronger) are added to it, and they tend to oxidize under the influence of external factors.

Such processes lead to jewelry made from it becoming dull and darkened. But still, quite often jewelry has to be cleaned of dirt that appears as a result of contact with environmental products and substances. It could be:

1. Microparticles in the form of dust and dirt that clog hard-to-reach places on jewelry.
2. Exposure to oxygen.
3. Chemicals that are found in household chemicals.
4. Chlorinated water used in swimming pools.

Short description

Gold is a soft metal that has been known to mankind for a long time. It was used to make household items, jewelry, and weapons. Due to its chemical properties, this alloy has become very highly valued. Coins were minted from it, and the presence of this metal provided a guarantee of stability.

Today, there are several types of gold that differ in color. These are such as:

• To obtain a yellow tint, copper and silver are added to gold.
• In order for gold to have a red color, impurities in the form of copper are added to it; the more copper there is, the more saturated the color becomes.
• Green gold is quite an interesting shade and is obtained due to impurities of silver and rubidium.
• The white precious metal is considered one of the most expensive because platinum is added to the alloy, and nickel, manganese or palladium can also be used.
• And one of the unusual alloys is black gold. Its surface is coated with rhodium or ruthenium, or it is oxidized with cobalt and chromium.

It is these additives that help change the appearance of jewelry, since contact with the environment causes an oxidative reaction. As a result, the jewelry loses its shine and the color may change slightly, so it is very important to know how to clean gold at home.

Taking good care of your jewelry will allow you to maintain its brilliant shine for as long as possible and avoid frequent cleaning.

To do this you need:

1. Remove jewelry when performing household work that involves the use of chemicals.
2. It is also recommended to leave jewelry at home if you plan to go to the bathhouse or sauna.
3. Before playing sports, you should also remove your favorite jewelry.
4. Doing garden work contributes to contamination of products, especially in hard-to-reach places.
5. Cosmetics also negatively affect the appearance of rings, chains, and bracelets, so it is recommended to remove them before applying cosmetics.

How to properly clean?

Cleaning gold at home is not very difficult, since there are a large number of options available, but it is worth considering the fact that it is better to select an individual method for each type of product. The thing is that the presence of impurities in the alloy composition can be subject to oxidation, which can lead to a worse result. How to clean gold so that it shines again and how to do it correctly?

Here are some main aspects:

• You need to clean gold with stones very carefully. The whole point is that some may not be harmed by water and the presence of a cleaning agent, while others may be quite the opposite. For example, pearls, turquoise and corals should never be cleaned with a solution that contains ammonia. As for rubies, lapis lazuli and opals, stains can be removed using a solution of plain water and baby soap.
• Cleaning white gold at home requires great care. This precaution is due to the fact that if you do not know the real composition of this metal, the jewelry can be damaged. Nickel is more unstable in relation to platinum, so such a product can be negatively affected by aggressive cleaning agents.

It is recommended to clean gold with diamonds and cubic zirconia using ammonia. To do this, take a glass of water, add a small amount of ammonia and soak the jewelry in it for half an hour. After that, use a cotton swab to wipe hard-to-reach places and rinse well with water. It definitely needs to be dried.

In addition, a ring with a diamond can be cleaned with a toothbrush, but it must have soft bristles. It needs to be moistened in soapy water and lightly rubbed over the decoration.

But as for the question of how to clean gold with ammonia, where there is a soft stone (amber, pearls, opal, turquoise), then using it, vinegar or other products containing alkalis is strictly prohibited. It is best to use medical alcohol for this, diluted 1:1 with water or a regular soap solution, but you still cannot leave them in such an environment for a long time.

1. Most people prefer to clean gold with ammonia; it works very well for removing stains on white gold items. To do this, just apply a few drops of this product on a soft cloth and polish with gentle movements. But this method is most suitable for jewelry that has a smooth surface, for example, on a ring, where there are no stones or patterns.
2. It is recommended to clean with ammonia and peroxide when there are dark spots on the old gold or traces of oxide are visible. How to clean gold with ammonia at home? In this case, you need to take a glass of water, 1 tsp. ammonia, 30 ml 30% sodium peroxide and 1 tsp. liquid soap. All these components need to be mixed; it is best to use non-metallic dishes and place jewelry in it for no more than 15-20 minutes. Afterwards they need to be rinsed well and dried using flannel or suede.
3. You need to clean gold with ammonia at home very carefully, using a light solution in which you need to place the jewelry and hold it in it for no more than 5 minutes. Approximately 5 drops of this product should be diluted in a glass of water.
4. You can also use another cleansing method. It consists of taking a small piece of foil and placing it at the bottom of the glass. Then you should put the jewelry in it and fill it with hot soda solution. It is done with the calculation of 1 tbsp. l. soda for 1 tbsp. water. It is recommended to keep the jewelry in a container with foil for several hours, after which they will need to be thoroughly rinsed and dried.
5. You can clean gold jewelry with toothpaste, but to do this, it must not contain abrasive particles that can damage the surface of the alloy. You can easily clean your gold ring and chains using this method. To do this, you will need a soft-bristled toothbrush and toothpaste. Then they need to be thoroughly rinsed with water and then wiped with lemon juice. It is worth noting that it is possible to remove stains from precious metal with toothpaste without abrasive particles quite often.
6. How to clean gold from iodine if droplets of this product get on it? You can use a special solution - sodium hyposulfite, which can be purchased at photo salons or pharmacies. This is the most effective way to remove iodine stains on precious metal.
7. You can clean gold at home, for example, with vinegar or citric acid. In this way, you can remove not only dirt, but also restore the shine and glossy appearance of the product. To do this, you need to fill a non-metallic container with vinegar and put the jewelry in it for about half an hour. Afterwards, you need to take them out and lightly brush them with a toothbrush, then rinse and dry. You can clean your gold chain very easily this way.
8. You can also clean gold with soda. At the bottom of the container you need to put a piece of fabric on it, put rings, earrings, chains, bracelets on it and fill it with a solution that consists of 1 cup of boiling water, 1 spoon of soda and half a spoon of detergent. The container is placed on low heat and the whole thing should be cooked for half an hour. Next, remove from heat and let cool. After decoration, rinse with water and dry with a soft cloth.

But products made from a precious alloy very easily absorb any energy, especially for jewelry given as a gift rather than purchased in jewelry stores. Therefore, it is advisable to cleanse at the energy level. But how to cleanse gold of negative energy at home? For this it is recommended to use:

• Pour regular table salt into a small container and place the decorations there for several days. After which the salt must be buried in the ground or washed down the drain.
• If possible, it is advisable to carry out cleansing in a church using holy water and church candles.
• At home, you can light a candle and use it to draw circles over your favorite decoration.
• You can simply rinse with running water for 10-15 minutes or put in holy water for half an hour.

how to clean gold at home?

Medical gold

Gold jewelry is a very expensive piece of jewelry and not everyone can afford to buy it. But not so long ago, metal appeared on store shelves, which in appearance is practically no different from the real thing. Medical gold is the name of this metal.

It is made on the basis of brass, which in certain proportions gives that amazing yellow shine that is inherent in the noble metal. As for white medical gold, most of the alloy is titanium, and special impurities are added to give it strength.

https://www.youtube.com/watch?v=OjKogbTsmxs

Based on this, the question arises as to what can be used to clean products made from such material. It is immediately worth noting that this alloy is quite durable and also very resistant to external factors. But contamination of products still occurs, so you need to know how to clean gold jewelry. The main methods include:

1. For half a glass of water you need to add 2-3 drops of liquid soap or you can replace it with shampoo. This solution is recommended to be used when jewelry has become dull or blackened.
2. You can remove dust and light dirt using wine alcohol or beer. To do this, you need to soak a cotton swab in these liquids and gently wipe the jewelry with it.
3. It is also good to remove stains with vinegar, but before using it, you should rinse the products with water and dry.
4. In addition, there is one simplest and also effective way to remove dirt on gold jewelry, this is the use of ultrasonic cleaning. This device is used to remove various types of contaminants and restore them to their former shine.

The best option for getting rid of dirt from your favorite jewelry is to go to a workshop, where specialists can find out what alloys the jewelry is made of and clean it at a professional level.

Source: https://metmastanki.ru/kak-chistit-zoloto-v-domashnih-usloviyah

Cleaning gold at home

There are several methods for cleaning gold jewelry at home:

1. Soak. Jewelry must be placed in a special liquid, which can be made from what you have in your kitchen, bathroom or medicine cabinet. After a certain time, the plaque can be removed with a simple soft cloth.
2. Polishing with improvised materials. Suitable if you need to restore a breathtaking shine to a product.
3. Mechanical cleaning. Applicable if contaminants have not responded to previous methods. Use with caution to avoid damaging the surface of your treasured piece of jewelry.

Soak

1. Salt . Dissolve 3 tablespoons of table salt in a glass of hot water. Place the jewelry there overnight and rinse it in running water in the morning.
2. Dishwashing liquid. Mix a teaspoon of liquid detergent in a glass of water, add gold and place in a water bath.

   Boil the jewelry for a few minutes, then rinse off any remaining soap with water and wipe dry with a soft cloth.

3. Ammonia + washing powder. Dilute a teaspoon of ammonia and a tablespoon of powder in a glass of water and boil. Place the jewelry in the hot solution for 2 hours, and then wipe it with a cloth.

4. Liquid soap + hydrogen peroxide . Mix a teaspoon of soap and 2 tablespoons of peroxide with a glass of warm water. Place the gold in the solution for 20 minutes.
5. Soda + foil. Dissolve 2-3 tablespoons of baking soda in a glass of hot water and pour into a container with a sheet of foil at the bottom.

   Place the jewelry there overnight, and in the morning, rinse it under the tap and dry it with a towel.

Polishing

1. Velvet or felt rag . An old, proven method. Just take a piece of suitable material and sit comfortably in front of your favorite TV series: polishing can take quite a lot of time.
2. Eraser . A soft white eraser will not only add shine to the gold, but will also remove light deposits.
3. Vinegar . Soak a cloth in table vinegar and gently wipe the jewelry.
4. Lipstick.

   An interesting way for girls. Apply lipstick (preferably colorless) to a piece of cloth and rub it over the tarnished gold.

5. Beer and egg white . And this is more suitable for brutal men. Mix a little foam with the protein, soak a cloth in the solution and rub the jewelry.
6. Onion juice. The principle is the same: soak a cloth in the juice and polish your favorite gold items. Do not forget to thoroughly rinse and dry your jewelry at the end of the procedure.

Mechanical cleaning

Of course, you can buy a special paste at a jewelry store. But if you want to effectively clean gold without leaving home, you can easily prepare something similar from scrap materials.

Remember: you should not use aggressive abrasives such as soda or sandpaper to clean jewelry; there is a high risk of damaging the surface of the precious metal. Therefore, we will use softer and more delicate mixtures.

1. Dentifrice . A little powder, an old toothbrush and a little patience will remove old plaque from gold.
2. Toothpaste + Vaseline . Works just as well as tooth powder, but more gently and gently.
3. Chalk + laundry soap . Pound the chalk (ordinary white one from the children's art set will do) into powder and mix in equal proportions with grated soap. Mix until you get a smooth paste and then rub the jewelry using a piece of cloth. To avoid streaks, be sure to rinse the gold under running water.
4. Chalk + ammonia . Grind the chalk and mix with ammonia until a thick mass is obtained. Clean the gold thoroughly with a toothbrush or cloth, then rinse and dry.

How to clean gold jewelry with stones

Be especially careful with such jewelry. Remember that some gemstones require special care. For example, opal, turquoise or malachite can be scratched by abrasives, so forget about tooth powder, baking soda or salt. Ruby, garnet and topaz are sensitive to high temperatures and should not be washed with hot water. And amber, pearls, coral or ivory really do not like acids, alkalis and solvents - it is better to entrust cleaning to specialists.

If you are confident in your abilities, use the following methods for cleaning gold jewelry with stones:

1. Alcohol . Moisten a cotton swab with an alcohol-containing liquid (strong alcohol, cologne or alcohol lotion will do). Gently wipe the jewelry to remove grease and other contaminants.
2. Gasoline . Dampen an unnecessary soft toothbrush with it and treat the gold item. The fine bristles are great for removing dirt from hard-to-reach places.

How to clean white gold

White gold differs from regular gold in that it has silver, palladium or nickel added to it to create a lighter shade, and is often plated with rhodium on top. It protects the jewelry and gives it a white shine.

Harsh methods are not suitable for such products, but the following will be useful:

1. Ammonia + hydrogen peroxide . Mix both liquids in a container in a ratio of 1:2. Place the gold in the resulting solution for half an hour, and then rinse in running water and wipe dry with a towel.
2. Sugar . Dissolve 2 tablespoons of sugar in a glass of water. Soak the jewelry in the sweet solution for 10–12 hours: this will restore their former shine.

How to clean matte gold

Jewelry is made matte using a special polishing method. Therefore, polishing materials are not used to clean such products, but only remove visible plaque. To clean matte gold, just soak it in a 25% ammonia solution for a couple of hours, then rinse it in running water and wipe dry with a cloth.

What to do to prevent gold from darkening

1. Keep jewelry away from direct sunlight.
2. Remove rings and bracelets before cleaning, going to the bathhouse or sauna, and when removing nail polish.
3. Wipe gold items dry if they have been exposed to moisture.

Source: https://sovetik.club/chistim-zoloto-v-domashnih-usloviyah/

Proper cleaning of gold with ammonia and ammonia

Pure gold alloy is not susceptible to corrosion or oxidation, but the jewelry industry does not use pure gold. Alloys contain impurities and, if there are a lot of them, oxidation and darkening of the metal will occur faster. Ammonia and ammonia have always been considered the most effective means of returning a product to its original appearance due to their effectiveness and availability.

Ammonia and ammonia will easily dissolve both organic and inorganic substances. Most often they are used in medicine and cosmetology, but they can also be used at home to clean gold items. Ammonia is produced at high temperatures using a catalyst made of nitrogen, air and hydrogen. When combined with water, a solution of ammonia is obtained.

Ammonia tincture has a strong alkaline reaction and a specific odor.

Ammonia contains 10% aqueous ammonia solution. It is designed for gentle cleansing and is excellent at fighting oxidation. In combination with water, the concentration of the solution will be small, which will help to avoid loss of color in stones and cuts.

Cleaning gold with ammonia is carried out when it is necessary to clean fragile jewelry or white gold. While ammonia is an excellent antiseptic and perfectly cleanses dirt and stains.

This type of cleaning is considered aggressive and must therefore be done manually.

Pros and cons of purifying gold with ammonia and ammonia

Pros:

• Availability. Both products are sold without a prescription in pharmacies at a low price.
• Efficiency. Products regain their original appearance and shine (as after purchase), thanks to cleansing from many contaminants.
• Safety. By adhering to clearly defined proportions and following the instructions, the threat to health will be minimal.
• Suitable for cleaning items containing precious stones.

Minuses:

• Strong smell of ammonia.
• Not used when the decoration has a matte surface.
• Not suitable for pearl jewelry.
• Engravings and gemstones are cleaned by hand only.
• Gold will smell like alcohol for a long time.

Precautionary measures

Ammonia and ammonia are chemicals that have a number of properties that can be harmful to human health. When using, you must observe the following precautions:

• Use rubber gloves when handling gold.
• Due to the pungent odor of the solution, the composition should be diluted in a well-ventilated room or outdoors.
• Before starting work, you must wear a mask, as ammonia is a toxic substance.
• Avoid contact with eyes and facial skin.
• Patients with vegetative-vascular dystonia are prohibited from working with the drug.

How to clean gold with ammonia

There are several simple cleaning methods using ammonia at home.

The simplest methods

For simple stains, the following recipe is suitable:

1. Mix 250 ml of water with one teaspoon of ammonia.
2. Soak the gold for 30 minutes.
3. Then rinse everything thoroughly and dry with a soft towel.

Using ammonia, you can clean gold by mixing it with cleaning powder, which gives an amazing effect. At home they do it this way:

1. Take a plastic or glass bowl.
2. Pour one glass of pre-boiled, warm water into a bowl.
3. Then add four milliliters of ammonia.
4. Pour one spoonful of any cleaning powder that does not contain any additives into the container.
5. Stir until the powder dissolves.
6. Place the jewelry in the resulting solution. The water should cover the gold jewelry.
7. After two hours, take out the gold and rinse it with tap water, wiping the product with a soft piece of cloth that does not have patterns.

Cleaning with ammonia and hydrogen peroxide

The cleansing method with ammonia and peroxide is considered one of the most effective. This is a fast way with available components. Let's take a closer look at the preparation of the solution and the cleaning method:

1. Mix one teaspoon of liquid soap and ammonia in a large glass.
2. Then add 40 g of hydrogen peroxide to the resulting liquid.
3. Dip your gold jewelry into the solution.
4. For complete cleansing you need to wait 20 minutes.
5. Then wash the gold from the solution in running water, and then dry the items.

See another very effective method for cleaning gold using ammonia, peroxide and detergent.

Another effective recipe for which you only need peroxide and ammonia:

1. Mix 50 ml of ammonia with 100 ml of hydrogen peroxide.
2. Place gold items in the resulting solution for 12 hours.
3. Once the time is up, rinse and dry your jewelry. You can speed up the process by adding hot water.
4. To prevent toxic fumes, cover the solution with a lid.

Don't experiment with ingredients. If there are more than two reagents in the composition, this will permanently damage the product.

A method for cleaning hard-to-reach places

A solution of ammonia with chalk is the most effective way to clean products with a large number of hard-to-reach places. These can be chains with complex weaving or brooches. To prepare you need:

1. Mix ammonia with crushed chalk.
2. Thoroughly coat all contaminated areas with the resulting mixture. It will have a specific smell. In this regard, gold jewelry must be placed in a bag or closed container. Leave it in this form overnight, during which time the mixture will completely harden.
3. The next day, rinse and dry your jewelry.

Cleaning gold with ammonia can be problematic due to the decorative elements or gemstones set into the piece. Cleaning must be done very carefully, by hand. A cotton swab will help with this. Soak it in the chosen solution and simply wipe all dirty, hard-to-reach places.

How to clean gold with ammonia

Before you start cleaning, you need to study the nature of the contamination. Accumulations of dust that appear periodically or the reason lies in the oxidation of the metal. For simple contamination, water and soap are enough to make a solution. It will remove dirt and dust, and for more complex ones you can use this recipe:

1. Pour the concentrated ammonia solution into any container.
2. Then place the contaminated gold items there.
3. The cleaning time depends on the degree and nature of the contamination and is chosen independently.
4. In case of heavy contamination, it is necessary to soak the products in the solution overnight. In the morning, take out your jewelry, rinse and let dry.
5. Then polish them with cloth or flannel. Polishing will remove any remaining dirt and plaque. After it, the products will shine.

To keep the need to clean gold jewelry to a minimum, you need to follow the basics of care. Remove products before using a shower or sauna, or using cream or cosmetics. Cleaning and regular maintenance of your gold will help keep your jewelry in its original condition.

Gold cleaning Jewelry cleaning

Source: https://you.cleaning/chistka/kak-pochistit-zoloto-nashatyrnym-spirtom-i-ammiakom

Rules and methods for cleaning gold with ammonia

How to clean gold with ammonia? This question has been relevant recently. The fact is that cleaning jewelry at home is increasingly gaining popularity. Naturally, such procedures are difficult to compare with those carried out in the salon. But ammonia is indispensable if you need to quickly remove dirt from rings and earrings and bring them back to normal. How to prepare a solution and clean jewelry using ammonia and improvised means?

Cleaning gold with ammonia

At its core, ammonia is hydrogen and nitrogen; such a compound is a gas with a characteristic odor. But there is also liquid ammonia, which can be bought at any pharmacy. It is considered a powerful solvent, for this reason it can be used to easily remove plaque and dirt from the surface of gold or silver.

Ammonia can be used to clean gold jewelry.

A cleaning solution with this substance should be used to wipe the product made of noble metal; most often the product is used for cleaning:

• gold;
• platinum;
• silver

Gold is a metal that in itself is not prone to corrosion, it does not oxidize, but jewelry is not made from pure gold. The jewelry industry uses alloys; the more impurities they contain, the faster the metal oxidizes and the jewelry loses its color and shine.

Platinum, like gold, does not corrode, but in its pure form it is also not used for making jewelry. It is diluted with other metals that are not distinguished by their nobility. Due to these impurities, which are susceptible to corrosion, jewelry changes color and loses its shine.

Silver oxidizes quite quickly, even when in contact with water and air, but plaque from the surface of products is easy to remove. To do this, simply clean the jewelry.

So is it possible to remove plaque from the surface of jewelry using only ammonia? In principle, this is quite possible, even heavy dirt will disappear, and the jewel will begin to shine as before.

Here are several ways to clean gold with ammonia:

1. You can use ammonia and soap solution.
2. Prepare a solution of ammonia and hydrogen peroxide.
3. Polish the jewelry with ammonia and water.

How to clean gold with ammonia and soap solution? To begin with, simply rinse the jewelry in warm water. Then heat the water in a saucepan or cup. Then add a few drops of shampoo or dishwashing liquid into the water; liquid soap will also do. You need to add a few teaspoons of ammonia to the prepared solution (it is advisable to take a 25% solution, it is easy to find in a pharmacy). Afterwards, all gold items are placed in the container; the cleaning procedure will take about 20–30 minutes.

The gold must be stirred periodically using a spatula or spoon made of wood or plastic. You should not leave jewelry in the solution for longer than 30 minutes, as ammonia is considered a solvent and can cause damage to the jewelry, causing abrasion and staining on the surface.

If you need to prepare a solution of hydrogen peroxide and ammonia, then you need to mix these two components in water. To prepare the product, you need to take a glass bowl, pour a glass of water into it, then add three teaspoons of ammonia and two tablespoons of hydrogen peroxide to the water.

If there is no peroxide, then you can use hydroperite, you just have to wait a little until the tablets completely dissolve. Then the jewelry should be immersed in the solution.

The products must be left in the container for 30–40 minutes; If after cleaning the dirt does not leave the surface of the jewelry, the procedure can be repeated.

The next method: you need to wet the flannel or cloth, drop a few drops of ammonia onto the fabric, and then wipe the decoration with it. Ammonia will remove plaque and dirt from the surface, but this cleaning method will not be able to remove old, strong stains.

All three methods can be used to clean jewelry made from silver, platinum and gold. Products inlaid with stones can also be processed.

Naturally, this method of cleaning jewelry from plaque and dirt has its pros and cons.

Positive aspects include:

1. Availability of the product. Ammonia can be purchased at a pharmacy without a prescription, and it is quite inexpensive, unlike specialized pastes designed specifically for cleaning jewelry.
2. Ease of use and good performance. Preparing a solution from ammonia and soap is quite simple. In addition, this method of cleaning jewelry from dirt and dust is quite effective; it can be used for processing platinum, white gold and other metals of noble origin.

But the following can be considered negative aspects:

• Unpleasant odor that occurs during preparation of the product. It is impossible to get rid of it, for this reason it is necessary to carry out the procedure in a well-ventilated area.
• Inefficiency. In some cases, this type of jewelry cleaning will not bring the desired result. But the risk of spoiling the product is very real, for this reason it is worth being vigilant.

But there is no need to experiment with the components and prepare a solution that will include two or three reagents. This combination can harm the product or permanently damage it.

How to clean jewelry with stones?

Precious stones themselves are capricious, they are very afraid of reagents, for this reason most solutions cannot be used for processing products inlaid with gems. Jewelers say that cleaning jewelry with stones at home without the help of a professional is dangerous, since gems can:

• lose shine;
• crack;
• become cloudy;
• come unstuck.

To avoid such complications, it is necessary to properly clean jewelry with stones. Ammonia can be used to remove dirt and plaque from their surface.

Ammonia is dissolved in water, a small amount of soap is added, and the product is not left in the water for a long time. Afterwards, you should rinse the jewelry under running water and brush it with a soft-bristled toothbrush.

Products inlaid with stones cannot be boiled or kept in water for a long time; they are susceptible to humidity and high temperatures. If the stone is glued to the metal, it may simply come off.

Jewelry with gems often has decorative elements or openwork carvings. A cotton swab will help remove plaque and dirt from such jewelry. It must be moistened in a solution of ammonia and water and wiped all hard-to-reach places.

You can also use pure ammonia without diluting it with water, but it is worth considering that upon contact with air, ammonia releases gas. An unpleasant, pungent odor appears. For this reason, it is worth cleaning in a well-ventilated area or using protective equipment.

White gold can be cleaned in the same way - this metal does not tolerate contact with reagents very well, and cleaning with salt or soda can cause scratches on the surface of white gold jewelry.

After cleaning

Since ammonia is considered a powerful solvent, its use is associated with certain nuances. In addition to the fact that it is worth monitoring the cleaning process itself, it is necessary to follow a certain sequence of actions after the procedure is completed.

What to do with the jewelry after cleaning?

1. It is necessary to rinse under a stream of water.
2. Dry on a napkin.
3. Polish with cloth or flannel.

After the procedure, rinse the jewelry under running water.

After contact with reagents, jewelry must be rinsed under a stream of cold water. Water will wash away any remaining reagents from the surface of the product and prevent the product from being abraded. Aggressive chemicals have a negative effect on precious metals; they can cause harm and cause the appearance of cloudy spots, oxides and stains. Therefore, you need to thoroughly rinse the products in water.

After the products have been washed, they need to be wiped and dried. You can wrap your jewelry in a napkin; the fabric will absorb excess liquid and protect it from moisture.

When the jewelry is dry, it must be polished using cloth or flannel. The surface of the product is simply rubbed with a cloth. As a result of polishing, it is possible to remove residual dirt and plaque from the surface of metal and stones and give them shine.

You can polish your jewelry every day; it will not cause any harm to it. But polishing will help remove dust and dirt from jewelry that has accumulated on them during the day.

Ammonia is a good product; it is often used to clean jewelry at home. But if the product is special, is of high value, or is expensive to the owner for some other reason, it is worth giving it to a jeweler. The master will not only remove dirt and plaque from the surface of the jewelry and return it to its original shine, but will also minimize all possible risks.

Source: https://DedPodaril.com/zoloto/chistim/kak-ammiakom-pochistit-zoloto.html

How to clean white, yellow and matte gold at home

Any gold jewelry begins to fade over time, loses its original attractiveness and does not look as impressive as before. This happens because impurities of other metals are introduced into the composition of jewelry gold to impart strength, which over time begin to oxidize and change color.

What to do if gold jewelry begins to resemble ordinary jewelry? To prevent this from happening, we will tell you how to clean gold at home so that it always looks as luxurious as when you bought it.

Recommendations for yellow gold

We would like to share with you simple and cheap ways to clean gold at home. These recipes are great for cleaning red and yellow gold jewelry.

Cleaning gold using ammonia, water and washing powder

As you can see, the recipe is quite simple. You don't need special cleaning products. It is enough to buy ammonium hydroxide (ammonia) at the pharmacy and mix it with any detergent (washing powder, dishwashing detergent, liquid soap, etc.).

To prepare the solution you will need:

• 1 glass of water;
• 1 tablespoon of detergent;
• 1 teaspoon of ammonia.

Boil water and pour it into a deep container. Add detergent there and pour in ammonia. Mix the mixture well until the washing powder or detergent is completely dissolved. Place the jewelry in the resulting mixture for two hours, then rinse with running water and wipe dry with a soft cloth.

Cleaning gold with dish soap

Another easy way to clean gold at home. You'll need:

• water;
•  dishwashing liquid.

To prepare the solution, add a teaspoon of detergent to a glass of water and mix thoroughly until it is completely dissolved. Place a piece of soft cloth at the bottom of the container. Place gold jewelry inside the cleaning solution and place it on a hot stove.

Boil the water for 10 minutes, then rinse the jewelry with running water and dry with a soft, lint-free cloth.

Cleaning gold using water, hydrogen peroxide and liquid soap

To prepare the solution you will need:

• glass of water;
• 40 ml hydrogen peroxide;
• a teaspoon of ammonia;
• a teaspoon of liquid soap.

Pour warm water into a deep container so that the solution completely covers the jewelry. Immerse gold items in the cleaning solution for 20 minutes. Then the gold must be washed with water and wiped dry.

Cleaning with salt

The simplest way to clean gold is salt. To make a cleaning solution, you only need two ingredients: salt and water.

Add three tablespoons of table salt to half a glass of hot water. Immerse the jewelry in the solution and leave it overnight. Afterwards, rinse them in running water and dry with a soft towel.

Cleaning gold with foil

You will need:

Add two tablespoons of soda to a glass of hot water. Take a deep container and place foil on the bottom. Place decorations in the bottom of the container and fill them with cleaning solution. Leave the jewelry in the solution overnight. In the morning, rinse them thoroughly with water and dry with a soft cloth.

If black spots have formed on the surface of gold jewelry and the above-described remedies do not help, you will have to use mechanical cleaning. To remove sulfide deposits, exposure to special abrasive materials is necessary. However, we do not recommend that you use soda and other products with rough abrasive elements; they can scratch the surface of the jewelry and will have to be polished.

To carry out mechanical cleaning of gold, you can use special cleaning pastes that are easy to find on the Internet. The cost of such a product is 100-500 rubles. They are made from gold-friendly ingredients, so they are excellent for cleaning jewelry.

To mechanically clean gold jewelry, use a soft toothbrush. Apply cleaning paste to the surface of the brush, and with gentle movements, begin cleaning the product in one direction.

After the procedure, wipe the jewelry with a towel and treat with ethyl alcohol or vodka. An alcohol-containing solution will help remove the fatty film that has formed after using the paste.

At the final stage, rinse the gold items with water and wipe dry with a cloth.

How to clean gold jewelry with stones

Cleaning gold jewelry with stones deserves special attention. After all, many precious stones, for example, amber, turquoise, opal, do not tolerate humidity well. Conventional methods for cleaning gold jewelry are not suitable here. Then the question naturally arises, how to clean gold with stones?

An ear stick is ideal for cleaning dirt from stones. Dip it in cologne and begin cleaning the stones with smooth movements. Do not clean jewelry frames with sharp objects; you can easily damage them.

If gemstones are glued to the product, do not immerse them in water. To clean gold from grease stains, you can use a soft cloth previously soaked in an alcohol solution. After cleaning, wipe the jewelry with a clean damp cloth and dry it.

Very strong stains on gold jewelry can be removed with a soft toothbrush dipped in gasoline. It is not recommended to use scouring powders as you may damage the surface of the product.

Cleaning gold with a matte surface

Matte gold is becoming more and more popular every year. However, such gold jewelry requires delicate care. When cleaning matte gold, do not use hard cloths, brushes, or powders - the surface will immediately wear off.

The ideal option for cleaning matte gold is dry cleaning. To carry it out you will need a 25% ammonia solution. Completely immerse the product in the solution and leave for a couple of hours. Then rinse the jewelry and dry it with a soft cloth.

To clean matte gold, you can use a mixture: mix a teaspoon of lime with water to obtain a liquid mass, add table salt to it on the tip of a knife and half a teaspoon of soda.

Leave the mixture for several days. Then immerse the jewelry in the resulting solution for several hours. Rinse thoroughly and dry.

We told you how to clean gold at home yourself. In conclusion, we will give some useful tips:

• remove gold jewelry while doing housework;
• remove products before applying cosmetic lotions and creams, as well as external medications;
• Don't forget to clean your gold jewelry periodically.

And then your favorite jewelry will serve you for a long time!

Source: http://ladymadonna.ru/%D0%BA%D0%B0%D0%BA-%D0%BF%D0%BE%D1%87%D0%B8%D1%81%D1%82%D0% B8%D1%82%D1%8C-%D0%B7%D0%BE%D0%BB%D0%BE%D1%82%D0%BE-%D0%B4%D0%BE%D0%BC%D0% B0

How to clean gold with ammonia? How to tidy up jewelry at home using peroxide and ammonia

All modern women, and even men, love gold. This is a beautiful and status metal. Products made from it are passed down by inheritance or bought as a gift. But nothing in this world lasts forever. Gold jewelry often requires cleaning as it loses its original shiny appearance. You can carry out high-quality cleaning at home yourself, simply by purchasing ammonia at the pharmacy.

Gold is a metal that requires careful handling. Products made from it are very easy to damage and lose their protective film. From this it follows that gold must not only be cleaned, but also left undamaged.

Causes of pollution

All jewelry is made not only from pure gold. Impurities are definitely added. It is because of them that jewelry fades. They become dirty and lose their original appearance.

If you look at pure gold, you will see that it is a soft material that wears off quickly. It is easily exposed to the external environment. Jewelry made from pure material can be easily damaged mechanically. If you squeeze it lightly, it will turn into a piece of metal without any shape.

The main reason for darkening of gold is contamination of the surface of the jewelry.

You should not wear gold while doing housework to avoid contaminating it. It is not advisable to shower in jewelry; also remove rings when washing your hands.

The most common cause of darkening of jewelry is creams and cosmetics, which are very difficult to remove from gold at home. If you wear makeup frequently, wipe your jewelry with a soft cloth as often as possible.

It happens that jewelry does not darken, but loses its shine - this indicates the presence of a large number of small scratches on the jewelry. In this situation, it is recommended to give the gold to a jewelry maker. You can clean scratched jewelry at home using tooth powder and ammonia. The product must be thoroughly wiped with this mixture. This method is suitable for products without stones.

Ligature

Jewelers add other metals to gold so that the alloy sparkles with different shades and it can be used to make jewelry that amazes with its beauty. The disadvantage of the ligature is the rapid contamination of the product.

The following impurities are added to gold:

1. To give a white color to the metal, you need to add nickel or platinum. White gold is considered one of the most expensive.
2. To give it a red color you will need copper. This metal alloy was very popular in Soviet times. The more copper added, the brighter the color will be.
3. Rubidium is necessary to produce a metal with a green tint. Jewelry made from this alloy is not so popular, so the fair sex does not really like to receive them as a gift.
4. Black gold is a fairly rare alloy. To obtain it, jewelers coat a gold item with cobalt or ruthenium.

Cleansing at home

No matter how high-quality the material used to make jewelry is, they tend to lose their attractiveness and shine. All this happens due to prolonged use of the product or improper storage. In this situation, ammonia will help.

In addition to ammonia, it is enough to have boiled water and any brand of washing powder on hand. You need to place the gold in a vessel and fill it with a mixture of the above products, leaving it for a couple of hours. After that, you need to thoroughly rinse the jewelry with plain water and dry it.

You can also use a product containing ammonia and peroxide, which also helps give gold items an attractive appearance. But here you need to wait only twenty minutes so as not to spoil the decoration. also avoid cleaning natural or artificial stones with this product. For them, you need to take alcohol and a cotton swab and carefully clean the surface without immersing in any solution.

If we are talking about a type of gold such as white, then it is better to use professional cleaning, as it is easily damaged.

But you can, of course, take a risk and do it yourself. The best option is considered to be ammonia and water, in a mixture of which the products should be kept for no more than half an hour.

Important nuances

You need to know that no method of cleaning at home can guarantee a 100% result. If you value your product very much, for example, it was inherited from your great-grandmother, then it is still better to turn to a specialist. He will provide guarantees for his work and after a short time you will receive your product back beautiful and shining.

Be careful when cleaning gold jewelry with stones. Ammonia can affect them in the most unpredictable ways. Precious stones must be removed from jewelry before the procedure.

If you decide to clean it yourself at home, then you need to know exactly the composition of the alloy. For example, white gold uses either platinum or nickel. These two metals are completely different in their chemical composition.

And it is absolutely impossible to distinguish them with the naked eye. This can only be done by professional jewelers with many years of experience. Platinum is quite strong and difficult to damage. And nickel is easily damaged by aggressive cleaning agents.

This must be taken into account before the cleaning procedure.

Hard to reach places are a challenge for cleaning jewelry. In some parts, it is almost impossible to rid the product of dirt. In this case, only a professional can help. It is better to entrust this work to him.

Cleaning with hard brushes causes the most damage to the product. In second place is the procedure with cleaning powder. This mechanical action leads to scratches. If the top layer of jewelry wears off, then the product will be more susceptible to corrosion.

You are entirely responsible for the consequences of cleaning at home. It is necessary to follow all the rules to avoid damage to expensive jewelry.

Recipes

If the jewelry is not very dirty, just soak it for half an hour with a solution of a glass of water and about 7-8 drops of ammonia. After this, carefully wipe the products with a dry soft cloth. At home, you can clean almost any product without stones with ammonia.

, a saturated solution of granulated sugar and a teaspoon of ammonia will help to clean gold at home Leave the items in it overnight and wipe them in the morning with a soft cloth.

Gold items can also be cleaned at home using this method: pour water into a pan, add a spoonful of ammonia and dishwashing detergent, then boil the item for 15 minutes.

The following solution will also help you clean gold at home: mix a glass of water with liquid soap and add a few drops of ammonia. Soak the product for an hour and wipe with a soft cloth.

Citric acid will also help purify gold at home: take 25 g of citric acid and a spoonful of ammonia in half a glass of water. Pour this solution over the jewelry and boil for 5 minutes, after which they are washed under cold water.

The easiest way to purify gold at home is to use table salt . For half a glass of water, take 2 tablespoons of table salt and the same amount of ammonia. The gold is left in this solution overnight.

Contact lens cleaning solution can help you clean gold at home. Jewelry should be left in it overnight, and in the morning, thoroughly wiped with an unusable toothbrush dipped in ammonia. After this, they need to be rinsed thoroughly.

One of the most well-known methods of cleaning gold at home is this: beer is mixed with egg white in equal proportions, a tablespoon of ammonia is added, after which the products are wiped with this solution.

You can purify gold of purity below 700 at home using a slice of lemon or a 10% solution of citric acid mixed with ammonia. Wet a flannel cloth with this solution and wipe the jewelry thoroughly.

As you know, you can wash everything with laundry soap, including jewelry. At home, this method of decoration is used as follows: rub a little laundry soap into water, add a spoonful of ammonia, put gold in it and boil it. After this, carefully wipe the jewelry with a cloth.

You can also go to a jewelry store : they probably sell products for cleaning jewelry at home. These can be either liquid, paste or powder products, or special wipes, which make cleaning jewelry very easy. Using a cloth is convenient for smooth decorations without hard-to-reach places.

If you want to clean jewelry with stones at home, you should be quite careful. The methods listed above are suitable for any jewelry, but this is not entirely true. Some stones may be damaged by this treatment, so it is better not to clean them at home. A jeweler can clean gold without risking the stones.

You will learn more about cleaning gold at home in the following video.

Source: http://thewalls.ru/moda/kak-pochistit-zoloto-nashatyirnyim-spir.html

1. Why clean gold at home?

For many, the pressing question is how to maintain their jewelry in its original form.
I want the gold to be like new. Gold is widely used in jewelry: a variety of jewelry is created from gold. However, this metal is never used in its pure form for a number of reasons. Gold is a very soft metal, easily susceptible to deformation and corrosion.

In jewelry practice, gold is diluted with the following metals:

nickel

copper

silver

palladium

platinum

cadmium

zinc

It is possible to add other connections.
These compounds contribute to the appearance of plaque. When interacting with surrounding air or water, including sea water, oxidation occurs. It is necessary to clean gold not only because dirt spoils the appearance. Also, plaque on gold is harmful to health, because... may cause allergic and inflammatory reactions.

you may be interested in Gold samples 

2. Where to start cleaning gold at home

Before you begin cleaning your gold jewelry, you must:

Learn about convenient cleaning methods

Choose the one that suits you best than the rest

Prepare all the ingredients you will need

 Prepare a container made of glass or plastic of the required size so that all the decorations fit there perfectly.

Prepare a soft, lint-free cloth

✽ gold cleaning solution with ammonia

You can clean your gold jewelry with this homemade cleaner.

To prepare such a solution you need to prepare:

 - water - 1 glass

 - ammonia - 4ml (or teaspoon)

 - washing powder (without coloring additives) - 1 tbsp.

If you don’t have such a powder at home, you can use dishwashing detergent.

The mixture is stirred until the powder dissolves completely, leaving no lumps.

The products are placed in the solution for 2 hours, after which they must be rinsed with clean running water. Next, wipe dry with a soft, lint-free towel. This way we get gold jewelry that is clean and shiny!

✽cleaning gold using heating

If you don’t have ammonia at home, but you don’t want to go to the pharmacy at all, you can use this cleaning method.

You will need:

 - water - 1 glass

 - dishwashing liquid - 1 tbsp. l.

 - a container in which you can heat the solution

 - soft cloth

Mix the dishwashing liquid with the required amount of water. Next, put a soft cloth at the bottom of the container, then the decorations that require cleaning, and then pour in the previously obtained solution.

The heating process lasts 10 minutes. Then we take out the products, rinse with running water, and dry with a soft towel.

The method is suitable for cleaning jewelry and jewelry made of yellow and red gold.

✽ homemade gold cleaning solution with hydrogen peroxide

Take:

 - water - 1 glass

 - hydrogen peroxide - 40 ml

 - ammonia - 1 tsp.

 — liquid soap (preferably without additives) — 1 tsp.

Take warm water (approximately body temperature), add the remaining ingredients and mix thoroughly.

Place decorations that need cleaning into the container.

The holding time is 20 minutes.

Next, rinse the gold items with plain water and wipe with a lint-free cloth.

✽ clean gold using foil

Required:

 - water - 1 glass

 - soda 2 tbsp. l.

 - foil

Choose a suitable container. Place foil on the bottom so that it covers the entire surface.

Mix the required amount of baking soda with water. Pour the resulting solution into a container and place the decorations there.

Leave the decorations for 12 hours

Rinse the jewelry with clean water and dry with a soft cloth.

✽ method of purifying gold  with salt, sugar

Another great way to clean gold at home. To implement it you need to take:

 - salt - 3 tbsp.

 - water 1 tbsp.

Pour salt into hot water

Place the jewelry in the solution and leave for 8-12 hours

Rinse with water and wipe with a soft cloth

If desired, salt can be replaced with sugar - the result is the same

✽ gold cleaning solution with vinegar

A great way to clean gold jewelry using vinegar 

Take table vinegar and soak a clean rag in it.

Wipe dirty areas, rinse and dry with a soft cloth.

In order for gold to shine effectively and prevent plaque from forming, it is necessary:

★avoid contact of the product with alkalis and various acids (housework should be carried out with gloves);

★avoid exposure to solvents and other aggressive substances (including nail polish removers);

★do not expose gold to high temperatures or ultraviolet light;

★withdraw gold while doing homework, playing sports, going to the pool, sauna and bathhouse

★do not allow cosmetics (creams) to come into contact with gold jewelry;

★do not allow gold to come into contact with medications, iodine, ointments, etc.

★ wipe the jewelry with a soft cloth, such as microfiber

★store jewelry in soft bags or special velvet cases. Do not store jewelry in plastic or cellophane - jewelry without oxygen may darken

★avoid mechanical damage to gold jewelry

⛳️ When cleaning gold with slight dirt, you need to use a solution with ammonia:

for 1 tbsp. take 5-10 drops of water. ammonia, then wash the gold jewelry in this solution. Then rinse in clean water and dry the gold.

⛳️When cleaning heavily contaminated gold, we prepare the following solution:

1 tbsp. Mix water with mild dishwashing detergent (preferably for children, without additives). Place gold jewelry in this solution overnight. Next, rinse with clean water and wipe with a soft cloth.

⛳️ For gold jewelry without stones, not only methods with ammonia are suitable, but also with the following components:

• with lipstick
• with special pastes for cleaning jewelry

Gold cleaner

Using lipstick you can remove stains, dullness 

You can also use a soap solution for jewelry with stones. Using a cotton pad or cotton swab, quickly pass over the surface and wipe dry with a soft cloth.  

What else you need to know about cleaning gold at home:

⛳️A solution with mild baby soap is suitable for cleaning white gold

Do not use products containing chlorine or aggressive chemicals.

⛳️ Some jewelry with stones are better cleaned without using water solutions. Stones such as pearls, turquoise, opal and amber do not tolerate a humid environment.

⛳️ You can clean gold with diamonds (sapphire, topas) at home, as well as jewelry with zirconium and cubic zirconia using ammonia.

⛳️ Onion juice is another way to restore shine to a darkened product. After rubbing it with it, after a couple of hours it will shine brighter. Upon completion of the procedure, the product must be rinsed with clean water and allowed to dry.

⛳️If yellowness forms in gold jewelry on a stone with ivory, you can use laundry bleach (5-10 min)

⛳️ Emeralds also cannot stand:

 - aqueous solutions

 - solutions with hydrogen peroxide and other solvents 

In such cases, to clean the gold, we take a cotton swab and cologne. We soak a cotton swab in cologne and run it over the stone and gold jewelry.

Store and use gold carefully, then it will bring joy not only to you, but also to your family and descendants! 

 

Source: http://lucky-woman.com/kak-pochistit-zoloto-v-domashnih-uslovijah/