How to make gold shine

How to quickly and effectively clean gold and gold jewelry (bracelet, chains, rings, etc.) at home, what you can use for cleaning

Over time, gold items may lose their original glossy shine, which was so caressing to the eye upon purchase. How can you return your favorite jewelry to its original appearance and make it sparkle again, like the day you bought it? There are many ways - at least one of them will probably suit you.

Preparing jewelry for cleaning

To make cleaning gold take as little effort as possible, and to remove plaque and dirt more easily, you should soak the jewelry overnight in salt water before cleaning:

1. Dissolve two tablespoons of salt in one glass of water.
2. Place the jewelry in a saline solution for eight hours.
3. Rinse the gold thoroughly in warm running water.

How to clean gold at home

Not everyone has the desire or means to take their favorite jewelry to a master for professional cleaning. In this case, you can resort to effective DIY cleaning. In order to thoroughly and safely clean gold items, you can use both special chemical compounds and folk remedies.

Pay special attention to thoroughly removing the product after cleaning. Prolonged contact of gold with chemicals or household chemicals used in folk methods can end badly for jewelry. Any cleaning agent can settle on the surface of the jewelry, causing darkening and plaque

Traditional methods

If you don’t have the opportunity or desire to go to the store for special jewelry cleaning products, try one of the proven folk remedies. All of them are based on simple ingredients that are likely to be found in almost every home.

Traditional medicines can cause allergies. Before using any of them, make sure that you do not have an allergic reaction to this product. To do this, you can apply a drop of gold cleaner to the crook of your elbow. If the skin begins to become red, itchy, or swollen, it may be best to use a different product or take precautions, such as wearing rubber gloves while cleaning.

Ammonia and washing powder

To effectively clean gold jewelry from plaque and tarnish, use a simple and proven recipe:

1. Dilute a teaspoon of ammonia 10% and a couple of pinches of washing powder in a glass of water.
2. Boil the resulting solution for a minute and remove it from the heat.
3. Place the decorations in the hot solution for two hours.
4. Rinse the items in running water. Make sure that there is no product left on them - prolonged contact with such aggressive substances will negatively affect the condition of the gold coating.

Ammonia solution, or ammonia, is an effective means for purifying gold.

Dishwashing liquid

Jewelry can be removed from plaque and discoloration using dishwashing liquid, which can be found in any kitchen.

It turns out that with its help you can wash not only dishes, but also your favorite jewelry from plaque:

1. Dissolve 1 teaspoon of cleaning product in 250 ml of warm water.
2. Place the decorations in the solution and place the container with them in a water bath.
3. Boil the products for 5–10 minutes.
4. Rinse off any remaining product and dry the jewelry with a clean cloth.

Dishwashing liquid is found in almost every home -

Liquid soap and hydrogen peroxide

If you have liquid hand soap and a bottle of hydrogen peroxide in the house, use this simple method for treating gold from tarnishing:

1. Add one fluff of soap and two tablespoons of peroxide to a glass of warm water.
2. Stir to create a soapy solution.
3. Place the decoration in the mixture and leave for 20 minutes.
4. Thoroughly rinse the foam off the gold and dry with a towel.

Liquid soap is very inexpensive, but it cleans gold well of plaque and tarnish.

Soda and foil

To use this method, you will need regular baking soda and baking foil (you can use chocolate foil if you don't have a baking roll):

1. Place a sheet of foil at the bottom of the container.
2. Fill the container with warm water.
3. Dissolve a couple of tablespoons of baking soda in it. Stir thoroughly so that there are no lumps or large sediment left.
4. Place the decoration in the mixture for 20 minutes.
5. Rinse the product in running water.

Baking soda and foil are very effective at “pulling” dirt out of jewelry.

Egg white and beer

An unusual, but no less effective method will require the white of one egg and half a glass of any beer (you can use both dark and light):

1. Mix the beer with the egg white, whisking the mixture a little.
2. Dip a clean cloth into the resulting liquid. To further polish your jewelry, use microfiber.
3. Wipe the jewelry, paying special attention to hard-to-reach places where plaque has accumulated.

Beer removes plaque from gold jewelry well, and protein polishes the gold surface

Dentifrice

This cleaning is not suitable for delicate items: white, matte gold, jewelry with coral or pearls, as well as gilding. For this method, in addition to the powder, you will also need an old toothbrush with soft bristles:

1. Apply a little powder to the brush.
2. Gently, without pressing, clean the surface of the decoration.
3. Rinse off the powder with water, paying particular attention to the various small indentations and decorative patterns on the item. Make sure that small particles of powder do not get stuck in the jewelry - this will have an extremely bad effect on the condition of the gold surface.

Tooth powder is easy to find in stores - this is one of the most affordable ways to clean gold at home

Lipstick

Another simple and affordable method is to treat gold with lipstick. This method will help restore the jewelry’s bright color and former shine.

To do this, you will need a colorless hygienic lipstick and a clean cloth:

1. Apply a little lipstick to a piece of cloth.
2. Rub the gold piece gently, polishing any tarnished areas.
3. Rinse the jewelry in waste water, removing any remaining product.

Almost every person has chapstick, but not everyone knows that it can be used to clean gold.

https://www.youtube.com/watch?v=OjKogbTsmxs

There is an alternative way to treat jewelry with chapstick. Apply lipstick directly to the darkened areas, then use a cotton pad to wipe and polish the product, then rinse and dry.

Special means

In addition to simple folk remedies, there are special solutions and pastes designed specifically for cleaning jewelry. Their price, as well as their effectiveness, can be completely different. Check out our selection of the best (according to customers) home cleaning products for gold jewelry:

• "Flyurin." The preparation is suitable for cleaning different types of gold (yellow, white, matte), but is not recommended for use on products with inserts made of pearls, corals, mother-of-pearl. It is also not suitable for blackened metal - if there is an artificial coating of oxide on the gold, then Flurin can wash it off, leaving unsightly stains and removing the vintage treatment. The cost of the drug starts from 100 rubles for a 100 ml bottle. It can be seen that the chain has become much cleaner, but there is still no shine, like after cleaning at a jeweler. Yuliabart

Source: https://domovod.guru/chistka-i-uhod/kak-pochistit-zoloto-v-domashnih-usloviyah.html

How to clean gilding from darkening and restore shine - ways

Gold-plated products are popular due to their brightness and expensive appearance, at a relatively low price relative to gold products.

If stored improperly or frequently used, the product gradually loses its performance characteristics: it darkens and fades. Keeping your product clean and tidy is easy if you use the tricks and secrets of cleaning and care.

This article contains the most effective and proven methods for cleaning gold plating at home.

Cleaning Rules

A gold-plated item is different from silver or gold, so the methods used for them are absolutely not suitable. Gold plating is very easy to ruin. The first stage of cleaning is the removal of surface dirt - dust, stains, grease. To do this, it is enough to treat the surface with alcohol or turpentine.

Gold plating is soft, so it is not recommended to use strong mechanical impact, as there is a risk of damage to the surface. Suede fabric is excellent for care; it adds shine to products and removes stains. To clean a gold-plated watch, sometimes it is enough to treat it with suede. If you need to clean gold-plated silverware, remove any grease from it first.

Before processing, perform the following steps:

1. Take a clean, dry cloth and wipe the gold with it. Flannel, suede and wool are perfect for this.
2. Then remove surface dirt.

Methods for removing stains from gold plated

To clean gold plating at home, you need to select the product carefully so as not to harm the capricious surface. If the dark spots are in a small area and are not very ingrained, then at home it is enough to polish with a cloth. If the item is heavily soiled or has been stored for a long time without care, an effective cleaning method will be required.

Wine spirit

Gold-plated items can be easily cleaned from tarnish and dirt at home using wine alcohol. Saturate a soft sponge with the product and treat the surface of the product. You can replace alcohol with wine vinegar, which can be found in the kitchen. At the final stage, treat the surface with suede to rub the surface to the desired shine.

Cleaning with beer

You can clean a gold-plated chain, earrings, ring and other items dusted with gold at home using beer. Oddly enough, the mild action of this alcoholic drink effectively copes with darkening of the coating and any dirt, eliminating damage to the material.

Pour beer into a glass, dip the gold-plated item into it and leave for 30 minutes, then rinse thoroughly and wipe dry.

Soap solution

Take any hard soap and grate it on a coarse grater. Take 1 tsp. shavings and dilute in 1 liter. warm water. For best results, use a couple of drops of ammonia added to soapy water. Immerse the gold in the container for 30 minutes, rinse with cool running water, and wipe dry with a clean cloth. The product effectively fights stains that have a green tint.

Alcohol and turpentine

The products help fight grease stains, darkening and dirt on the surface of gold-plated products. Ethyl, medical, denatured alcohol is suitable for cleaning. Take one of the products available in the house, saturate a soft sponge with it, treat the gilding, rinse off any remaining dirt and product under running water, and polish with a cloth.

Table vinegar

The diluted product is used to wipe or soak the product.

1. Stir 2 tbsp. acids in 1 tbsp. water, moisten the sponge and treat the surface with the composition.
2. Stir 2 tbsp. acids in 1 l. water and place the item in the composition for 15 minutes.

After all procedures, it is important to rinse the gold plating from any remaining product and dry it thoroughly. Acid residue can destroy the gold plating and permanently damage your favorite jewelry or cutlery.

Egg white against darkening

Break the egg and separate the yolk from the white. In this recipe we need protein. Dip a cotton pad into the white and apply it to the gilding. Cleaning will restore the shine and brightness of the coating. The effectiveness of the product will be higher if you add a tablespoon of white to the protein. When working with chemicals, you will need to protect your hands with gloves.

Egg yolk and javel water

Take the yolk and beat it well, add 1 tbsp. sorrel water. Soak a cotton pad in the solution and wipe the surface thoroughly. Rinse the product in running water, dry and polish.

Processing nuances

1. Products with stones require the use of gentle products. When dipping or processing there is a risk of damaging the stone or the attachment to the product.
2. Carefully inspect the product; some elements may be made of simple metal, which may rust after cleaning. Therefore, it is not recommended to immerse the product; wiping is sufficient.
3. For cleaning, it is recommended to purchase special professional products that can be purchased at a jewelry store.

What can't you do to clean gold plate?

Any products used should not contain abrasive particles. Even the smallest particles can severely damage the spray. For example, you should not clean gold plate with chalk, toothpaste, soda or powder.

Any abrasive product will cause scratches.

Some products are coated with a very thin layer of coating; abrasives easily erase it. Do not use rough scourers or brushes, or aggressive acids for cleaning.

Prevention and care rules

The gold plating wears off over time. Constant use leads to a gradual thinning of the spray layer. By following some recommendations you can extend the service life. Rules for caring for gold-plated products:

1. Regularly polish cutlery and decorations using a suede cloth.
2. Minimize contact with water, perfume and body creams.
3. Place each product separately, so that they do not touch each other. After each use of jewelry, put it back in place. Distribute each decoration into separate suede bags, and cutlery into special boxes.

Clean regularly, regardless of whether the product has lost its attractive appearance or not.

Source: https://iHouseWife.ru/garderob/chem-pochistit-pozolotu

፠ How to polish gold at home?

There are many ways to save gold jewelry and restore its shine at home. We have already written about various mixtures for removing dirt. They are based on ammonia, water and soap (liquid soap or shampoo). We do not recommend cleaning with washing powders, because they contain a lot of abrasive particles that can damage soft metal.

Today we will figure out how to polish jewelry at home, at the same time removing surface contamination. For these purposes, we will use improvised methods and Goya paste.

Method one - polishing gold with chalk

Chalk can be used to polish gold in different ways. Some craftsmen rub the gold ring directly onto a piece of chalk, and then wipe it with a clean, fluffy cloth. This method makes it possible to quickly polish and rub out small scratches on gold.

With just a little effort, your ring or earrings will sparkle as if they just came from the store.

Disadvantages of the method. Small chalk chips are an abrasive. Scratches are erased due to the fact that the top layer of gold is removed. If you do not want to lose the weight of the jewelry, then do it differently.

Rub the chalk between your fingers into fine crumbs and polish with your hands, then wipe with a soft flannel. This method of cleaning gold with chalk is more gentle. It will add shine, but will damage the surface less.

Method two - Goya paste

If you have already tried at least a little to understand the issues of cleaning gold at home, then you have probably come across methods using Goya paste. This means you know that with the help of this abrasive you can clean not only gold items, but also copper coins, silver and much more. But do you know the insidious nuance of this paste?

In order not to spoil the product, it is worth considering that Goya paste has 4 different compositions. Accordingly, there are options on sale that differ in abrasive ability. Remember, gold is a soft metal and the top layer is very easy to remove. Therefore, you should approach the choice of pasta very carefully.

For gold, it is best to use a black paste, which is suitable specifically for polishing and has an abrasiveness of 0.3-0.1 microns. Due to chromium oxide, which makes up approximately 75% of the paste, you will get a pure mirror shine.

How does it work. Apply the paste to the fabric (for this it is best to take a waffle towel or flannel), rub the ring, earrings or bracelet, polish with clean and dry velvet.

Disadvantages of the method. If you use green, highly abrasive paste instead of black paste, you risk damaging your gold and reducing its weight. Of course, this will not be noticeable from the outside. But if you want to exchange the product for another one with an additional payment for the work, you will be unpleasantly surprised when weighing it in the store.

Bottom line. If you want to polish gold using GOI, then choose only black paste.

Method three - lipstick

We found this method on the Internet, where it was published as a life hack, and tested it. The soft chapstick that we rubbed on the wedding ring and then wiped with a soft cloth was as good as new!

Using this method, we were unable to hide the scratches on the ring, which simply inevitably appear with constant wear. But we were able to give it a very bright shine.

So, chapstick works, but does every woman have it in her makeup bag? Most often there is a colored lipstick, and we decided to try out how it would work.

You don't need to put in any special effort. Easily apply lipstick, wipe with a napkin and off you go.

Disadvantages of the method. Any lipstick, whether hygienic or not, contains fats. Accordingly, a greasy film remains on the gold. If the ring does not fit tightly on your finger, then you risk losing it after such a procedure. It is better to use this method if the ring is very tight.

Dentifrice

It works exactly the same as chalk. With its help you can not only polish, but also clean gold jewelry. We recommend cleaning not with a toothbrush, but in the same way as with chalk: rub the powder between your fingers and carefully walk over the gold.

As in the case of chalk, the powder has abrasiveness. But it is so insignificant that visible scratches will not appear, and the product will be polished.

How to polish gold jewelry with stones

The shine of polished gold will be an appropriate setting for precious stones. The methods for polishing the gold itself remain the same. But in the places where the stones are attached, we go much more carefully with our fingers, a brush, flannel or velvet.

Ring or earrings with one large stone

Dirt collects under the stone itself, which is difficult to remove. If you decide to clean and polish such a product at home, we recommend soaking it in a soapy solution for an hour. For these purposes, you can use liquid soap, cream dishwashing gel or shampoo. For shine after cleaning, add ammonia to this mixture and leave the gold in it for at least an hour. The water should be warm, almost hot.

Once you take the product out, you can quickly remove the dirt with a rag. But the residues that have collected on the stone from below can be removed with a toothpick.

Attention! If you do not want to lose the stone, then you should remove dirt very carefully, without trying to pry off the stone itself.

Gold items with a scattering of stones

You can easily clean them using the same chalk, GOI paste or tooth powder. Run your fingers over the fionits and they will delight you with their shine even faster than gold.

There are products that will be very difficult to clean and polish at home. These are chains with intricate weaving, rings and earrings with technically complex patterns, items with precious stones. You can buy a special gold cleaning liquid for them at home, but it is better to take them to a jewelry workshop.

And some tips on how to handle gold jewelry so you don't have to clean it.

Do you wash the dishes or clean the house? Wear cleaning gloves to protect not only your rings, but also your hands from caustic chemicals. Try not to let your gold ring come into contact with iodine - a chemical reaction may occur that will leave stains on the gold. Remove the ring when performing cosmetic procedures. If you follow these simple rules, you will have to resort to home gold polishing less often.

Source: https://xn----mtbechcrdba9adf6a.com/news/kak-polirovat-zoloto-v-domashnih-usloviyah.htm

How to restore shine to gold jewelry at home

Gold has long been considered a luxury item. All kinds of jewelry are made from it: rings, chains, bracelets and earrings. Unfortunately, they can lose their original appearance, fade and become dark.

Why does gold tarnish

Gold is a noble metal that does not react with oxygen in the air, like some others. However, over time it may fade and become dark in color. This depends on several reasons:

• Gold in its pure form is soft and cannot hold its shape. Therefore, to add rigidity, a mixture of copper, silver and palladium is added to it. The percentage of pure gold in an alloy determines its fineness. If the manufacturer is unscrupulous and decides to save money, then he can change the ratio of metals in the alloy. And this significantly deteriorates the quality of the jewelry. And after a short use, such a luxury item will begin to turn black and lose its shine.
• With constant wear, gold comes into contact with the skin. All secretions such as sweat, oil and skin particles can form a film on jewelry. As a result, they lose their original appearance.
• Some cosmetic products contain mercury compounds. They come into contact with the alloy components, which contributes to the appearance of gray spots on the jewelry.

Help Gray stains from interaction with mercury compounds cannot be cleaned, since the changes are irreversible. You will have to say goodbye to such decoration.

Methods for cleaning gold items

To return gold to its original appearance and make it shine, you can try the following methods.

Soak

Jewelry is placed in a container and filled with special solutions, professional or folk. The following products are suitable for soaking:

• Salt. In a ratio of 3 tablespoons per glass of water. The product is left overnight in the solution.
• Dishwashing liquid (1 teaspoon) is diluted in a glass of water, then heated in a water bath and boiled for 2-3 minutes.
• Liquid soap is mixed with hydrogen peroxide: one teaspoon and two tablespoons, respectively, and diluted with a glass of water. The jewelry is soaked in this solution for 20 minutes.
• Dissolve baking soda (2 tablespoons) in a glass of hot water. Leave the decoration overnight.

Help: After soaking, all jewelry must be washed with clean running water and wiped dry.

Polishing

Used to restore lost shine. Can be done at home.

For this purpose:

• Products made from velvet or felt fabrics.
• An eraser that, in addition to polishing, can remove small deposits.
• A cloth moistened with a 6% vinegar solution.
• A clear lip balm applied to fabric.
• Fabric soaked in onion juice or beer.

Mechanical cleaning

If the previous methods did not help, then you can resort to this method. You should purchase professional paste at a jewelry store, or use what you have in the house.

• Tooth powder is applied to a toothbrush and gently cleanses the gold.
• Toothpaste and Vaseline gently refresh the surface of jewelry.
• Laundry soap with crushed chalk. Mixes in a one to one ratio.
• A thick paste consisting of chalk and ammonia.

Rub the jewelry with one of these pastes using a cloth or toothbrush, then rinse with clean water and dry.

Important: Be careful not to damage the surface of the product. Do not use sandpaper or coarse abrasives. It is better to entrust such polishing methods to a professional jeweler.

Cleaning jewelry with chemicals

Another way to eliminate darkening is the use of chemicals. They are applied to a cotton swab and carefully wiped over the jewelry.

Such substances include:

• ammonia;
• hydrogen peroxide;
• alcohol or alcohol cologne;
• petrol.

Nuances of cleaning

There is quite a lot of gold jewelry. From the simplest without decoration - to products with stones, white gold, and also especially polished to a matte state. Therefore, each jewelry has its own nuances when cleaning from darkening.

Gold jewelry with stones

• Opal, turquoise and malachite should not be mechanically cleaned, as they are easily scratched.
• Ruby, topaz and garnet inserts do not withstand hot water.
• Ivory, amber, coral and pearls can deteriorate from exposure to chemical solutions, acids, alkalis and solvents. Such jewelry should be entrusted to a jeweler.
• For all jewelry with stones, alcohol and gasoline are suitable, with which a cotton pad or swab is moistened and the jewelry is carefully wiped.

White gold

The alloy of this metal has this color due to the addition of silver, palladium, nickel, and the surface is coated with rhodium. Mechanical cleaning methods are not suitable for this type of gold. Therefore, if it darkens, use soaking for 30 minutes in a solution of ammonia with hydrogen peroxide in a ratio of one to two. Or use sugar dissolved in water. Dilute two tablespoons of sugar in a glass of water and leave the decoration in it overnight.

Matte gold

The effect is obtained as a result of a special polishing method. To avoid damaging the product, mechanical cleaning and polishing are not used. A simple soaking in a 25% ammonia solution for two hours is sufficient. Then rinse with clean water and dry.

Homemade Recipes for Adding Shine

There are several ways to add shine to your favorite jewelry at home.

• Dissolve one teaspoon of ammonia and peroxide in 100 ml of water, add half a teaspoon of washing powder and mix. Soak the product in the resulting solution for 30 minutes. After this, rinse with clean water and dry.
• Soak a cotton swab or pad with a solution of table vinegar (6%), wrap the decoration and wait 15 minutes. After this, rinse with water and wipe dry. Acetic acid does not react with gold, but it can react with other metals in the alloy. In addition, vinegar causes turbidity in gemstones.
• A simple and modern way of cleaning. Place the jewelry in a glass and pour Coca-Cola into it. After 20 minutes, remove, rinse with water and dry the gold.
• Mix a tablespoon of baking soda with a glass of water. Pour the solution into the pan with the decoration. Boil for 5-7 minutes.

Help It is not advisable to place the decoration directly on the bottom of the pan; you need to place a piece of gauze or cotton cloth.

Examples of cleaning at home

Sometimes, to make a ring shine again, you just need to polish it. To do this, take a piece of cloth with soft bristles and rub the ring for 15-20 minutes. At the same time, minor scratches will be smoothed out and visible dirt will be erased.

If the previous method did not solve the problem, you can use toothpaste. You need to clean the ring with a soft toothbrush and toothpaste. It will remove grease and polish the metal.

There is another original way. Cut the onion in half and rub the ring with the cut several times. After this, set the ring aside for a couple of hours. Onion juice will remove all dirt from the product. Then rinse the ring with water and dry.

How to restore shine to a gold chain

The chain is more susceptible to darkening as dirt accumulates between its links. Mechanical cleaning will not bring the desired result. Therefore, such decoration is soaked and boiled. Pour 300 ml of water into an enamel pan, bring to a boil, add a few drops of liquid soap and soda (1 tablespoon). Place the chain in the pan and boil for 10 minutes, stirring occasionally. Then rinse with water and wipe dry.

What to do to prevent gold from darkening and tarnishing

There are a few simple rules that will help maintain the shine of gold jewelry.

1. Store gold in a dark box, as sunlight accelerates the oxidation process of the metal.
2. Do not expose jewelry to chemicals, especially when cleaning or going to the pool.
3. To prevent high temperatures from damaging the jewelry, it is recommended to remove it before taking a bath or sauna.
4. If jewelry gets wet, be sure to dry it with a cloth.

All of the above methods apply only to high-quality gold jewelry. By following certain rules, your favorite jewelry will delight you with its brilliance and beauty. But, if the gold has already tarnished, then there is always a way to restore its original appearance. You can eliminate darkening at home, but it is better to consult with a specialist so as not to accidentally ruin an expensive item.

We recommend reading

Source: https://womenlot.ru/raznoe/kak-vernut-blesk-zolotyim-ukrasheniyam.html

How to make gold shine at home yourself

Gold jewelry is an indicator of success, wealth, and also simply a good investment of money. But, unfortunately, over time, your favorite things lose their appeal if you don’t take care of them in time. Let's figure out how to restore shine to your favorite jewelry at home.

Method 1

If your jewelry has diamond inserts, then this method is ideal for you, as it is distinguished by its delicacy and ability to rid jewelry of dirt, dust and grease.

Basically, you just need to wash your jewelry.

1. Soak them in warm water with the addition of liquid soap, detergent or shampoo (1-2 drops).
2. After a couple of hours, use a soft toothbrush to clean the gold. Thin bristles penetrate into all holes and remove all accumulated dirt well.
3. Then rinse the items in clean water and dry thoroughly with a soft cloth.

To give the best shine, it is recommended to wipe the product with flannel.

This procedure must be carried out regularly to maintain the appearance of the gold.

Method 2

The well-known ammonia alcohol perfectly removes dirt and degreases metal.

1. Pour some alcohol into a non-metallic container.
2. Dip the jewelry into a plate of alcohol and leave it there until you notice a lightening of the metal. This usually takes at least a couple of hours. But you can soak the products overnight.
3. Then rinse the gold jewelry in clean water and wipe with a soft cloth.

Method 3

This method of cleaning at home is distinguished by its speed. It will take less than half an hour.

1. Mix 40 ml of hydrogen peroxide, as well as a teaspoon of liquid soap and ammonia in a glass of warm water.
2. Leave the jewelry in this solution for 20 minutes.
3. Take them out and rinse them in water.
4. Wipe with a piece of soft cloth.

Using the same components, you can perform faster express cleaning.

1. Pour hydrogen peroxide, ammonia and detergent (you can even use laundry detergent) into the jar in the same proportions as in the previous recipe.
2. Keep the products in the jar for 5 minutes.
3. Cover the jar with a lid and shake well.
4. Remove the jewelry, rinse with clean water and wipe dry.

Method 4

1. Pour half a glass of hot water and add 3 tablespoons of salt.
2. Leave the gold in this solution overnight, and in the morning rinse in water and wipe with a soft cloth.

Method 5

1. Take some fairly deep vessel, for example, a plate, and cover its bottom with regular foil.
2. Place gold items on foil.
3. Fill them with the following solution: a glass of hot water with 2 tablespoons of soda.
4. Let the decorations sit in the plate for 8-10 hours.
5. Rinse them and dry them.

Method 6

This method is not aimed at purifying gold, but at giving it a dazzling shine.

1. Dissolve 3 teaspoons of sugar in a glass.
2. Soak your jewelry in it overnight.
3. Rinse them and dry them with a soft cloth.

Method 7

A must-have attribute of a woman's handbag will help clean gold from accumulated dirty deposits. We are talking about lipstick. Its composition will help restore the shine of gold and is simply ideal for this procedure. Although you can use tooth powder, lipstick is still softer and more delicate in texture.

1. Apply lipstick to cloth or cotton wool.
2. Wipe the jewelry until it shines.
3. Remove any remaining lipstick or powder with a clean napkin.

Method 8

1. Apply some gel toothpaste to a cloth or brush.
2. Clean the product carefully.
3. Rinse it in running water and wipe dry.

It is not advisable to clean gold jewelry with a toothbrush. It is better to limit yourself to a piece of matter. But if the bristles of your brush are soft enough, you can use it to clean hard-to-reach places.

Method 9

This method works well against darkening on gold.

1. Prepare some onion juice.
2. Soak a cloth in the juice and rub the product with it.
3. Leave it for about 2 hours.
4. Rinse and wipe dry.

Method 10

The melting point of gold is extremely high (1064°C), so it can be boiled without any fear.

1. Take some water into a saucepan and put it on the fire.
2. Add a few drops of detergent or a little washing powder to the water.
3. Boil the gold in a saucepan for 10 minutes.
4. Then rinse and wipe.

You can also boil the jewelry in a solution of water with citric acid (half a sachet).

Method 11

You can soak the gold in contact lens cleaning solution and leave the jewelry on overnight.

White gold cleaning

White gold items are more easily damaged, so they should be cleaned with great care, avoiding hard brushes, powders and other abrasive substances.

To tidy up the appearance of white gold, you can use the following method.

1. Mix one spoon of ammonia and a drop of detergent (liquid soap, dishwashing detergent or a little washing powder) in a glass of clean water.
2. Immerse the jewelry in this solution for just an hour.
3. Then rinse and wipe with a cloth.

White gold does not like moisture, so it should be wiped very carefully and thoroughly.

Cleaning items with stones

When there are stones on a gold product, you should be careful in choosing the cleaning method. Some types of precious stones (turquoise, amber, opal, etc.) are afraid of water and can lose their color or become deformed from excess moisture. In addition, you should not soak gold jewelry, the stones to which are attached with glue.

A simple procedure will help to add shine to gold and restore its former attractiveness. You just need to soak a cotton swab or cloth in cologne or alcohol and wipe the metal surface. Then do the same only with a cloth soaked in water. And complete the procedure with dry wiping.

Source: http://HozObzor.ru/garderob/aksessuaryi/kak-vernut-zolotu-blesk-v-domashnih-usloviyah.html

Methods and rules for cleaning gold yourself - Shine Samotsvet

Not only women love gold jewelry, but also men often wear chains and rings made of this metal. But over time, gold items begin to darken and stains appear on them.

To prevent this, they need to be properly cared for. There are several recommendations for cleaning gold. Following these rules will keep your jewelry in good condition.

Now factories make such jewelry with a low gold content. The metal itself does not lose its shine; this phenomenon is caused by additional components that are included in the jewelry.

Unfortunately, you can’t do without them, since pure gold has a huge price. In addition, such impurities increase the strength of the product.

Maintaining the appearance of a chain or ring is quite simple; all you need to know is how to clean gold yourself.

Cleaning methods

It is not necessary to take your jewelry to a specialized workshop. You can also clean it at home.

There are several effective recipes for this:

• Toothpaste copes well with this problem. It is applied to the product and cleaned with a soft brush. Then, simply wash off with water.
• They often use a product that is used when washing dishes. It is dissolved in water, which must be purified, and not from the tap. For 200 g of water, 1 teaspoon of chemical is enough. Place a cloth in a container with warm water and pour in detergent. The gold item is placed on a cloth. The water should completely cover the decoration. Then boil for 7 minutes. Then the gold is taken out and washed with running water. This method is suitable for jewelry that has complex patterns and is heavily soiled.
• If the gold has simply darkened, then it is better to use a simpler cleaning method. Add 3 tablespoons of salt to a glass of boiling water. When the solution has cooled, the product is dipped into it and left overnight. In the morning, rinse and dry. The decoration will become shiny again.
• Sometimes they clean with soda. For a glass of boiling water - 2 tablespoons of soda. Place a piece of foil on the bottom of the cup, on which the gold is placed. Pour in the cooled solution and leave for 12 hours.

If these methods do not help, you will have to take it to a workshop. But, basically, these methods are sufficient.

Preserving the shine of gold jewelry

Knowing how to clean gold is good, but it's better to learn how to keep your gold in great condition for a long time.

Here are some helpful tips you can use:

• Always remove jewelry when doing any work.
• You can take water procedures and play sports without gold.
• It is better to remove jewelry when applying cosmetics. They moisturize the skin and eliminate wrinkles, but greatly harm the noble metal. The slightest chemical reaction will ruin an expensive product. By the way, this also applies to various drugs, such as iodine or brilliant green.

Following these simple rules will help keep your gold jewelry in excellent condition.

Source: https://kabirski-store.ru/osobennosti/metody-i-pravila-samostoyatelnoj-chistki-zolota.html

How to clean gold at home: 5 simple and effective ways

Gold jewelry is a source of pride for its owner. In order to maintain their attractive appearance, it is necessary to clean them, since during use the products become coated and lose their shine.

To make your ring shine: how to prevent contamination

For many people, the question is how to clean gold at home in order to get a good and durable result. Knowing the composition of gold jewelry will help you achieve good results.

Gold in its pure form without the addition of other substances is not used, since this metal is very soft, therefore jewelry contains a number of substances that help improve physical and chemical properties.

The appearance of plaque is promoted by:

• zinc (in small quantities);
• copper;
• silver;
• cadmium (a little).

When interacting with surrounding air or water, including sea water, oxidation occurs. It is necessary to clean gold, since contaminants not only spoil the appearance, but also harm health: plaque can cause inflammatory and allergic reactions.

In order for gold to shine effectively and prevent plaque from forming, it is necessary:

• do not allow the product to come into contact with alkalis and various acids (housework should be carried out with gloves);
• Avoid exposure to solvents and other aggressive substances (including nail polish removers);
• protect from exposure to paints and abrasives (remove or wear gloves);
• Do not expose to high temperatures and ultraviolet radiation.

To prevent contamination, the cleaning process should be carried out regularly even if these recommendations are followed.

Nuances of the cleaning process

Before you start cleaning, there are some important things to consider.

• Many jewelry have complex shapes and places that are difficult to reach on your own, for example, places where stones are inserted, bends, and joints.
• The container for preparing the cleaning mixture must be selected so that the product can fit completely in it.

If you take these nuances into account, the work will go faster and the result will be of better quality.

Cleaning process: preparing a solution with ammonia

We clean gold correctly using ammonia and regular washing powder. It is necessary to give preference to containers made of glass or plastic to eliminate the possibility of oxidation. To obtain a cleaning solution with ammonia you will need:

• boiled water – 250 ml;
• ammonia – 4 ml;
• washing powder (without coloring additives) – 1 tbsp.

If there is no powder, then you can safely use dishwashing detergent.

The mixture is stirred until the powder dissolves completely, leaving no lumps.

The products are placed in the solution for 2-2.5 hours, after which they must be rinsed with clean running water and wiped dry using a soft, lint-free towel or the same cloth.

Other cleaning solutions

If you couldn’t buy ammonia, you can use other recipes that will effectively clean yellow or red gold at home.

1. Use dishwashing detergent as the main component. To do this you will need to take:

• water – 1 glass;
• dishwashing detergent (preferably with a softening effect) – 1 tsp.

The container that should be used for the cleaning process should be selected taking into account the fact that the composition will be heated for several minutes.

A soft cloth should be placed at the bottom, then the jewelry that needs to be cleaned, and then all the components to create the solution are added to the container. The heating process lasts 10 minutes. Then the products should be removed and rinsed under running water, and dried with a soft towel.

The method is suitable for cleaning jewelry and jewelry made of yellow, which is the most popular, and red, which is gaining popularity, gold.

2. Liquid soap and hydrogen peroxide are also used when there is a need to clean gold from dirt and plaque. You will need to mix:

• water -250 ml;
• hydrogen peroxide – 40 ml;
• liquid soap (it is better to choose a soft one, without unnecessary additives) – 1 tsp;
• ammonia – 1 tsp.

The water needs to be heated, but not boiled - it should be warm, about 37 degrees, then add all the other ingredients and mix. Then put the jewelry that needs cleaning into the container. The holding time is 20 minutes. Finally, gold items should be rinsed with plain water and dried using a lint-free cloth.

3. Salt, which is probably found in every home, is also used to clean gold from dark deposits. An effective method for those who want to achieve a good and long-lasting result includes the following components in the solution:

• water – 160ml;
• salt – 3 tbsp.

The ingredients should be mixed until the salt is completely dissolved. The jewelry is placed in the solution for 12 hours, then washed under running water.

4. Another easy way to clean gold is to use foil. The products will shine and sparkle. Required:

• water -1 glass;
• soda – 2 tbsp.
• foil.

Place foil on the bottom of the selected container so that it completely covers the surface. You need to mix water and soda, pour it into a container and put decorations in the solution. The cleaning process also continues for 12 hours, after which the gold should be washed and dried with a soft cloth.

Cleaning gold with a matte finish requires special attention.

5. The number of jewelry made using this type of metal is increasing every day. Therefore, the question of how to clean gold at home without damaging the surface is especially relevant. Accuracy, slowness and delicacy are important here. Powders and brushes cannot be used.

You can use the following solution - ammonia (25% solution). The product is placed in it for 2 hours, then washed with water and wiped dry with a soft cloth.

Lime mixed with water is also suitable for cleaning matte gold items. Lime (3-4 g) needs to be mixed with water, add a little soda (1 g), and mix. The mixture should sit for 3 days. Then the products are placed in it for 4 hours. At the end, the gold is washed as usual and dried with a soft towel.

Mechanical cleaning of yellow and red gold products

In some cases, this method is necessary. For example, if none of the proposed methods has any effect and the contamination remains, mechanical action cannot be avoided. It is important to consider that abrasive pastes are not used in this process, especially if products are made with cubic zirconia, since the surface of jewelry and stones is very easily scratched.

It is recommended to prepare your own cleaning paste. Required:

• toothpaste (without additional elements);
• petrolatum;
• crushed chalk;
• laundry soap;
• water.

All components should be mixed well. The soap should first be grated. The proportions of each substance should be the same. The resulting paste is applied to the product using a soft cloth. Then you need to rinse the gold item to get rid of the Vaseline. At the end, the product is additionally rinsed under water and dried.

Source: https://adella.ru/home/cleaning/chistim-zoloto-v-domashnih-usloviyah.html

How to make gold shine

When purchasing jewelry, few people think about how to preserve their original, unique shine in the future. Over time, gold becomes tarnished, and dust accumulates in the links of chains and bracelets, which significantly spoils the appearance of expensive jewelry.

But if you properly care for the product and know how to clean gold at home, you can return your jewelry to its unique shine.

There are many recipes and techniques for easily cleaning the surface of precious metal yourself. But, before cleaning gold jewelry, it would be nice to have basic information about how to properly handle the items so as not to harm them.

What you need to know before cleaning gold at home Over time, gold becomes tarnished, and dust gets stuck in the links of chains and bracelets, which significantly spoils the appearance of expensive jewelry.

But if you properly care for the product and know how to clean gold at home, you can return your jewelry to its unique shine.

There are many recipes and techniques for easily cleaning the surface of precious metal yourself. But, before cleaning gold jewelry, it would be nice to have basic information about how to properly handle the items so as not to harm them.

What you need to know before refining gold at home

• Do not use strong force when cleaning thin cast parts, as the soft material can be easily deformed.
• Avoid hard brushes when brushing. The bristles may leave scratches, and you will not be able to correct this defect on your own.
• Remember that exposure to an aggressive environment has an adverse effect on gold. For example, cleaning products, chlorine, and household chemicals in contact with gold surfaces can leave marks and light spots on them.

How to purify gold at home? We return shine to products

To understand how to purify gold at home, you should familiarize yourself with the following simple techniques. The best option is to purchase a special care product at a jewelry store. However, you can also use improvised means.

1. Soak the jewelry in soapy water. Pour hot water into a glass bowl, add shampoo, shower gel or liquid soap, and immerse gold in this solution for 1.5-2 hours. After this time, rinse the product with warm water and wipe with a soft cloth. This method will help you deal with minor stains the first time.
2. An ordinary ammonia solution (or ammonia) removes dirt well. Add pharmaceutical ammonia to warm water (5 drops per regular glass), place jewelry in this solution. After an hour, rinse in warm water. Additionally, you can clean your jewelry with a soapy toothbrush. Be sure to wipe the products from moisture with a clean cloth.
3. You can remove heavy dirt, traces of grease, and dust that has accumulated in the links as follows. Mix 5 ml of hydrogen peroxide, the same amount of ammonia and a little washing powder (about 1 teaspoon) in a half-liter jar. Dip the decorations into the solution, close the jar with a lid and leave for 5 minutes. Shake the jar at the end. You can remove the products. Rinse thoroughly in water and dry with a soft cloth.

There are also folk tricks on how to purify gold at home. For this purpose mechanical cleaning is used. You can pour tooth powder onto a cotton pad and rub the product with it. You can use vinegar or onion juice instead. Be sure to rinse the jewelry after cleaning.

https://www.youtube.com/watch?v=H4y4KIX5zHw

In addition, special pastes are excellent at helping to remove dirt. They are made from a soap solution with the addition of vegetable oil and petroleum jelly.

.ru

How to clean gold

There are several methods for cleaning gold jewelry at home:

1. Soak. Jewelry must be placed in a special liquid, which can be made from what you have in your kitchen, bathroom or medicine cabinet. After a certain time, the plaque can be removed with a simple soft cloth.
2. Polishing with improvised materials. Suitable if you need to restore a breathtaking shine to a product.
3. Mechanical cleaning. Applicable if contaminants have not responded to previous methods. Use with caution to avoid damaging the surface of your treasured piece of jewelry.

How to clean gold at home: 10 simple ways

Who likes to part with their favorite gold jewelry and accessories? It is especially painful when they simply get dirty, darken, turn pale and lose their former beauty. Of course, this can be avoided if you regularly care for the metal, because even unpretentious gold needs care. But what to do when trouble has already happened? Let's talk!

1. Dishwashing liquid

The best way to combat grease, oil traces and plaque of any origin is a product created specifically for this task. Take dishwashing gel, dilute it in water and leave the decorations in it. You can even boil gold without coatings and stones in a solution for a few minutes - a good way to clean out all the small links and other hard-to-reach places.

2. Salt

Saline solution is the simplest, most affordable and fairly gentle means for cleaning gold jewelry. Pour a couple of tablespoons of fine salt into a glass and leave the gold in the concentrated solution overnight, and in the morning just rinse with water. The method is not suitable for soft stones that do not tolerate long soaking.

3. Peroxide

Add 2 tablespoons of peroxide to a glass with a spoonful of liquid soap or your shampoo, and then fill it with warm water. Mix the solution and leave the gold in it for 15 minutes, then polish with a cloth.

4. Tooth powder or paste

The beauty of the method is in its simplicity: you only need them and an old toothbrush - nothing more. Keep in mind that powder cleans better, but it is rougher, and with paste you will have to tinker longer - but it is more delicate. Another method is to apply bleaching paste to the gold and leave it until it dries - this will bring back the lost shine.

5. Ammonia

It is used in its pure form, diluted with water or mixed with other components to enhance the effect. For example, with washing powder in the proportion - one spoon of each per cup of boiling water. The jewelry is placed in the solution for 1-2 hours, after which most of the dirt comes off on its own.

6. Chalk

Chalk is good for cleaning gold, but it should be jewelry without stones or coatings that are easy to scratch. Mix chalk powder with grated laundry soap or ammonia to a thick, dense paste. To apply the mixture well to the surface, use an old toothbrush. Don't forget to wash your jewelry to avoid stains later.

7. Soda and foil

Dissolve a couple of tablespoons of baking soda in hot water and place a sheet of regular kitchen foil on the bottom of the container. Place gold jewelry on the bottom and leave to soak overnight. After this, your favorite bracelets and chains need to dry on their own - lay them out on a towel or paper napkin.

8. How to clean white gold?

The thing about white gold is that it is actually an alloy of several different components. It may contain nickel, copper, palladium, rhodium plating and other additives, depending on the decoration. The main rule here is not to erase the top light and shiny layer, so no abrasives.

You can refresh such decorations in a sugar solution (2 large spoons per glass of water), in which they are soaked overnight. The same soap solution, where you need to place the jewelry for half an hour, will help with minor blackness.

When the white gold is pretty dirty, leave it for half an hour in a solution of ammonia and shampoo.

Cleaned chains and rings should be thoroughly rinsed with running water and gently wiped with a soft microfiber or paper towel. Keep in mind that restoring the lost shine of white gold is a task close to impossible. Therefore, it is better to entrust any serious manipulations and complex stains to master jewelers.

Source: https://lafoy.ru/kak-pochistit-zoloto-v-domashnih-usloviyah-10-sposobov-463

How to clean gold at home: ways to restore shine, remove dirt and dark deposits, polish

Precious jewelry is an alloy of metals, which is important for durability. However, this feature makes them vulnerable to oxidation processes. Products become dull and do not look as good as in the store. In this case, there are several factors that contribute to increased oxidation of the precious metal:

• constant contact with cosmetics and perfumes;
• increased sweating, in which sebum is actively secreted;
• dust and too humid climate.

How to clean gold: yellow and red

Is it possible to clean gold at home to make it shine like new? Quite. Moreover, even simple improvised means will help restore gold to its original shine. There are separate recommendations for each type of gold. Below are methods for yellow and red decorations.

Peroxide

Peculiarity. A gold cleaning solution based on hydrogen peroxide will help effectively remove grease stains and slow down the oxidation process.

What you will need:

• 3% hydrogen peroxide – 30 ml;
• water – 250 ml;
• liquid soap;
• ammonia - one small spoon.

Sequencing

1. Pour hot water into a ceramic or plastic cup and add the remaining ingredients.
2. Dip the chain rings into the solution.
3. Leave for 15 minutes.
4. Rinse jewelry in clean water.
5. Dry gently using a towel or paper napkin.

Foil and soda

Peculiarities. This procedure takes 8-12 hours. But this method can add shine to gold and quickly remove dark deposits.

What you will need:

• water – 250 ml;
• a piece of foil for baking;
• baking soda - one and a half large spoons.

Sequencing

1. Wrap the inside of a ceramic bowl with foil and place jewelry on top.
2. The cleaning solution must be hot, so you need to heat the water and add baking soda in advance.
3. Pour the resulting composition into gold.
4. Leave until morning.
5. Rinse in clean water and dry using a towel or paper napkin.

2 recipes for white

This precious metal becomes yellow and cloudy over time. The white tint is obtained due to the nickel in the composition. Similar products are also coated with rhodium, which gradually wears off. Therefore, jewelry should not be rubbed with brushes, abrasive powders or pastes. It would be correct to use a special jewelry napkin to care for such things. But there are also “home” ways to clean gold from such an alloy.

Sugar

Description. In order to polish gold from scratches and give it its original shine, you can use the “sweet” washing method.

What you will need:

• water – 200 ml;
• sugar - three small spoons.

Sequencing

1. Mix the liquid with sugar in a glass until completely dissolved, put the earring bracelets in it.
2. Leave until morning.
3. Rinse the product, dab it with a napkin or towel.

Ammonia

Description. To clean white gold with diamonds at home, a method using an ammonia solution is suitable.

What you will need:

• water – 50 ml;
• liquid soap or “Fairy” type gel – half a teaspoon;
• ammonia – 50 ml.

Sequencing

1. Mix all the ingredients in a glass, immerse the ring or chain in it.
2. Wait 25-30 minutes.
3. Remove the jewelry and rinse it thoroughly with clean water.
4. Be sure to wipe dry with a napkin, because white gold cannot be left wet.

Fashionable matte products

This type of jewelry is becoming increasingly popular. But caring for them is more troublesome, because it is not recommended to use hard brushes or abrasive powders to clean such products. Therefore, professional options for cleaning gold at home are most often used. For example, using ultrasonic baths or special jewelry solutions. However, you can try other methods. These same methods work great for gold-plated jewelry.

Ammonia soaking

Peculiarity. Ammonia is safe for matte gold and can remove blackness from the surface.

What you will need:

• 10% ammonia - 50 ml;
• dry soft rags.

Sequencing

1. Place the product in an ammonia solution.
2. Leave for several hours.
3. After rinse, dry with a cloth.

Salt-soda mixture with lime

Peculiarity. Baking soda and salt are gentle not only on gold items. They are safe, for example, for both silver and copper.

What you will need:

• bleach – one teaspoon;
• water – two teaspoons;
• a pinch of soda;
• salt on the tip of a knife.

Sequencing

1. Combine all ingredients, knead well, set aside for two days.
2. Dip the bracelet or chain into the resulting mixture for one to two hours.
3. Afterwards, wash the product thoroughly and pat dry with a cloth.

If rings with stones

Earrings or rings with inserts made of various stones are cleaned more gently and delicately, most often without ammonia or toothpaste. The exceptions are diamond, aquamarine, quartz and jewelry with cubic zirconia. Do not use hot water or boiling water - this will cause the stone to change color.

Alcohol

Description. This method will degrease the surface of the stone and make it sparkle with renewed vigor. Effective in the case of ruby, lapis lazuli, opal.

What you will need:

• two flannel napkins;
• cologne or alcohol solution.

Sequencing

1. Moisten the flannel generously in an alcohol solution or cologne and wipe all darkened areas to remove dirt and stains.
2. Take a second napkin and wipe the product dry.

To clean jewelry with stones, ear sticks are used, which allow you to work on hard-to-reach places. If the stones are glued to the jewelry, it should not be immersed in water or cleaning solutions.

Description. Softer stones (pearls, turquoise, amber, emerald or coral) do not tolerate cleaning with chalk, vinegar, or lemon. Then how can you clean gold with stones of this kind? You just need to soak the jewelry in a rich soap solution.

What you will need:

• a teaspoon of liquid soap;
• water – 50 ml;
• a pinch of salt.

Sequencing

1. Prepare a soap solution, beat it into thick foam, add salt.
2. Place all jewelry that needs to be washed from darkening into the solution.
3. Leave for a couple of hours.
4. Then rinse the gold with clean water and lay it on a cloth to dry.

When processing products with inserts, do not use “too popular” means such as treating with lipstick or soaking in Coca-Cola. This is the case when it is better not to experiment.

Prevention measures

Caring for gold jewelry involves three components.

1. Take breaks. It is especially important to remove jewelry before cleaning, as well as before using body cosmetics. Don't wear gold if you're going to the gym, pool, beach or sauna. Remove during manicure to prevent nail polish remover from getting on your jewelry.
2. Use gloves. To protect your wedding band, get into the habit of using rubber gloves for various chores.
3. Do prevention. At least once a month, carry out routine cleaning with soapy water or alcohol.

Store your jewelry in a box lined with soft, velvety fabric. Cardboard is not suitable for these purposes. Protect jewelry from moisture. And be sure to make a note in your notebook about how to clean the gold so that options for solving the problem are always at your fingertips.

Source: https://DomZnatok.ru/uborka/uhod-za-veshhami/kak-pochistit-zoloto/

How to properly clean gold to make it shine

The shine of gold in fine jewelry undoubtedly pleases its owners and evokes the most pleasant emotions. I want the jewel to always sparkle and not lose its attractiveness. But sometimes gold, which until recently was blinding with its radiance as new, becomes dull, darkens and even turns black. The question arises how to give gold its former beauty.

Return

Handy household products

The most popular cleaning method

There are many ways to remove dark deposits from jewelry. The simplest of them is used using products that everyone has: shampoo, toilet soap, a toothbrush.

 You should wash gold under warm running water - this will remove grease and dirt better. It’s also a good idea to clean expensive diamond necklaces and earrings in this way.

 The main thing is to remember that you need to wash the products periodically to prevent the formation of complex plaque, since this is easier than cleaning gold that has already tarnished.

To begin, place the jewelry in a bowl of water for two hours, adding a little hair shampoo or liquid soap. Some people prefer to use dishwashing liquid; this is also an effective method for restoring the shine of gold. After the specified time has passed, you need to remove the items from the water and clean them with a toothbrush. Its fine hairs will clean out deposits from all crevices. At the same time, the smooth surface of the decoration will not be scratched.

After finishing the work, you should dip the gold in water again to remove any remaining dirt, and then wipe it dry with a towel with soft bristles. One of the best types of fabric for this procedure is flannel.

Return

Home medicine cabinet remedies to remove tarnish from jewelry

What other ways can you clean your jewelry? Medicines from the first aid kit, which, as a rule, are in every family, will help restore the shine and radiance of everyone’s favorite gold. Ordinary ammonia and hydrogen peroxide will come to the rescue.

When using the first one, you need to have a lot of patience, since the cleansing procedure will take quite a long time. The smell of ammonia is not at all pleasant, so you should be prepared for this. It is necessary to pour a little alcohol into a container (not a metal one) and place the products there.

If the contamination is not very strong, three hours will be enough to remove it, and if the coating is thoroughly absorbed into the metal, you will have to wait about 10-12 hours.

Special device for cleaning jewelry

Immersing the jewelry in hydrogen peroxide (about 40 ml) for 20 minutes will help to add shine to gold that has been lost during long wear. In addition to hydrogen peroxide, the solution must include other components, including:

• 1 tsp soap
• the same amount of ammonia.

When 20 minutes have passed, the product will need to be rinsed with plain water and then wiped dry with a suitable cloth.

Return

Removing plaque with salt and foil

Many representatives of the fair sex who like to cook and spend a lot of time in the kitchen always have a pack of salt and foil for baking. These products can help housewives not only in the process of preparing dishes, but also in cleaning beautiful jewelry.

Instead of cleaning gold with complex chemical solutions, it is much easier to turn to the common table salt. Just 3 tbsp. of this product in half a glass of hot water - this is the calculation of the mixture necessary to remove dirt from the surface of the metal. The product should be placed in liquid in the evening and left there until the morning. The next day, simply rinse in running water and remove the moisture with a towel.

You can also use baking soda and foil to make the gold shine. You need to place a piece of foil in a bowl, put gold items on it, and pour pre-prepared liquid on top (2 tablespoons of soda per 200 ml of hot water). It is better if the products are kept in a container with the solution all night. In the morning they should be wiped dry with a cloth.

Return

Proper care of white gold

White gold has a very fragile surface. It is fragile in the sense that if handled harshly or improperly cleaned, it can easily become damaged. Considering this, you should approach the matter of caring for such a product with great care. The question of how to clean gold if it is white is better rephrased: what should not be used in the process of removing plaque? Brushes with hard bristles, toothpastes and washing powders are strictly prohibited.

The most appropriate solution in this case would be a solution of the following components:

• running water in the amount of 1 glass;
• ammonia - 1 tsp;
• a little dishwashing liquid.

Soaking in solution before cleaning

The product must be placed in the prepared liquid for 60 minutes, then rinsed in water and wiped dry. Take your time - the jewelry must become completely dry, otherwise the condition of the metal will deteriorate.

Source: https://grammzolota.ru/uhod/chistit-chtobyi-blestelo-pridat-vernut-blesk.html