How to remove rust from chrome surfaces

8 products to remove plaque from chrome plumbing parts

Chromium is a fairly brittle metal, most often used for coating other materials. In domestic conditions, the most common way to use chrome coating is by spraying parts of plumbing fixtures.

The positive side of this coating is that there is no need for special care of its components. There is no need to purchase expensive cleaning detergents. The disadvantage of chrome plating is its rapid darkening.

Therefore, to restore the shine of such a coating, it is necessary to carry out constant cleaning and maintenance procedures.

Using dishwashing liquid

To use it to clean chrome parts, it is necessary to prepare an aqueous solution of detergent. First of all, chrome parts should be cleaned of dirt, greasy substances and stains. The purpose of such an obstacle is to expose existing rust stains.

You need to mix the drops like this: take about 10 drops of detergent into a bucket of slightly warm water. The solution should be mixed until a small amount of foam appears, and use a sponge to wipe all necessary surfaces.

When performing this process, you should periodically wring out the sponge you are using.

If you need to clean a chrome surface in a hard-to-reach place, you should use a toothbrush, which significantly simplifies the successful completion of this procedure. After you have successfully cleaned the chrome parts sufficiently, you should drain the soapy water, rinse the bucket and fill it with clean water. After this, soak a sponge in it and thoroughly wipe all parts to remove any remaining cleaning solution.

Getting rid of the most stubborn stains

Sometimes when cleaning chrome-plated plumbing fixtures, you encounter contaminants against which a soapy water solution is completely powerless. A solution to this problem can be a moderately acidic solution of wine vinegar.

To obtain it, you should mix wine vinegar and ordinary water in equal proportions. Dip a sponge into this solution and try to wipe off the most stubborn stains.

After completing all necessary cleaning procedures, wipe the cleaned areas dry with a cloth.

After this, you should constantly wipe the surface itself, as stains from moisture remain on it. When wiping surfaces on which rust is constantly forming, you should clean it periodically. After finishing cleaning the necessary parts, they should be subjected to a cleaning and polishing procedure using aluminum foil cut into small pieces.

It is the most suitable material for such trips. You should not use an overly hard sponge, which may well leave scratches on the surface being treated.

8 products to remove plaque from chrome plumbing parts Link to main publication

Source: https://freelancehack.ru/other/8-sredstv-chtoby-otmyt-ot-naleta-hromirovannye-detali-santehniki

How to restore shine to chrome products

There are quite a lot of chrome-plated products in modern homes. These are faucets, heated towel rails, shower heads, hooks and rods for hanging things and even the housings of some household appliances. All these items look great and can be used even in very humid environments for many years without corrosion.

Of course, over time, chrome loses its shine and beauty, and it no longer looks so impressive. Stains on the surface appear very easily, but if you regularly clean the chrome product, there will be no problems. But it also happens that you don’t get around to maintaining a shiny thing and the idea to clean it comes only when it starts to look untidy.

What should you do to restore the shine to a chrome-plated item?

Main pollution factors

Before you start cleaning a chrome-plated item, it is worth understanding what the main factors of contamination are. Everyone is well aware of the low quality of tap water. It is the substances contained in it that are the main enemies of chrome shine.

Water can contain more than 1,000 different components, many of which can create a permanent coating on objects. The most unpleasant of all is limescale deposits - it appears quite quickly and, unfortunately, it will not be possible to get rid of it with ordinary detergents.

They also affect chrome-plated products and other substances. In the kitchen, most often, grease deposits can be found on chrome surfaces. Despite the fact that it is not comparable in durability to lime, in advanced cases you will have to tinker with cleaning, even if you have a good detergent to combat grease.

Water and soap

As trivial as it may sound, the most effective way to return chrome-plated items to their original shine is ordinary soap. The type and type of this detergent is not at all important, although more concentrated formulations make cleaning faster.

In this regard, we can recommend using laundry soap, which is ground on a fine grater and dissolved in warm water. Liquid soap for hands and face is also suitable, and in extreme cases, shampoo or shower gel.

The exact proportions of the detergent composition are not important, but it is better that the soap concentration is as high as possible.

The soap solution is applied to the chrome plated object using a soft cloth. After the entire surface to be cleaned is covered with the composition, you need to wait a few minutes and only then begin to wipe off the dirt.

We often have to deal with chrome-plated products of complex shape, such as faucets. It is not easy to clean these items properly due to their complex shape.

To make the task easier, use an old toothbrush to clean, which will allow you to get into the most secluded corners.

Vinegar

If grease can be defeated with soap, then in order to fight limescale, you will have to use “heavier artillery”. It is known that lime is destroyed in an acidic environment, so the ideal remedy to combat it is ordinary table vinegar.

When working with this liquid, you need to take certain precautions - avoid contact with eyes and, preferably, on exposed skin. Vinegar, like a soap solution, is applied to chrome surfaces using a soft cloth or household spray.

This substance begins to act immediately after application - the plaque literally dissolves before our eyes and all that remains is to wash it off from the item being cleaned with warm water.

Chrome polishes

Chrome, free of impurities, shines and is pleasing to the eye. But there are ways to give the surface a real mirror shine. To do this, you will have to purchase special polishes for chrome-plated products, which today are widely represented on the home care market and in auto chemical stores. Each of these compositions has its own technology of use, which is described in detail in the instructions or on the label, but they all give a magnificent effect that you and your loved ones will surely appreciate.

What you should never do

Even though chrome is a metal, it is quite easy to damage. This is due to the fact that, firstly, chromium is a rather soft metal, and secondly, the coating applied by manufacturers to products is designed only for corrosion protection and an aesthetic effect, so its thickness is a fraction of a millimeter.

A chrome-plated product can be scratched even with a hard dishwashing sponge, therefore, despite the temptation to do the job faster and better, under no circumstances should you use abrasive products and substances for cleaning. Chromium can also be destroyed by certain chemicals.

Because of this, if you are going to use commercial cleaners for the job, make sure that they can be used to clean chrome, otherwise you risk permanently damaging the shiny surface.

Useful tips 09.20.2019 12:51:11

Only registered users can leave reviews. Please register

Source: https://Krepcom.ru/blog/poleznye-sovety/kak-vernut-blesk-khromirovannym-izdeliyam/

How to remove rust

Cleanliness in the house not only pleases the household, but is also one of the most important in terms of hygiene. Various contaminants in the interior can aggravate the appearance of mold, mildew, and various bacteria harmful to our body.

Most stains are easily removed, and with timely cleaning, much effort will not be spent on removing them. Other types of contaminants, such as rusty stains on plumbing fixtures, pure metal, sanitary ware or plastic, even if they have recently appeared, are problematic to remove.

In this article we will tell you how to remove rust using simple means, without resorting to the use of expensive household chemicals.

Rules to follow when cleaning products

Rust stains, in most cases, are removed with acids, so be sure to wear gloves and protect your eyes and clothing. During the procedure, children and pets must be removed from the premises. Be sure to ventilate the apartment afterwards.
The methods described in this article for enamel surfaces can be applied once every 1-2 months. They are not suitable for everyday cleaning, as the substances used can damage the enamel. Of course, at first glance, you won't notice it.
But acids, interacting with the glaze, thin it, and microcracks form on the smooth surface, which in the future will even more attract various pollutants.

Advice!

Before applying the product, rinse and clean the product from other contaminants.
Rinse the surface with water and dry it with a clean cloth.
Then follow the instructions.

Coca Cola

This is a very modern and effective means for removing rust from metal.
Pour the drink onto a clean, dried surface and wait half an hour.
If it is heavily soiled, soak a dry cloth in the liquid and place it on the stain. If the item is small, it can be placed in a container filled with Coca-Cola. Exposure time is half an hour to an hour.
Then take a brush or non-metallic scrub brush and scrub the rust.
Finally, simply rinse the product with water.
If necessary, the procedure can be repeated.

Table vinegar and lemon juice

This method is more suitable for severe corrosion than for subtle rust marks.

Mix the ingredients in equal proportions.
Moisten a rag with this mixture and apply to the problem area for 2 hours.
Then clean, rinse with water and dry the metal.

Potatoes and salt

Cut the raw potato and sprinkle the flesh with salt.
Next, rub the metal surface with the cut. To enhance the effect, leave the potatoes on the rust for 15 minutes.
Rinse and dry the product.

How to remove red marks from nickel and chrome surfaces?

For this type of coating, the use of aggressive acids is contraindicated to avoid damage to the appearance. For example, to effectively remove red stains from a sink or nickel- or chrome-plated plumbing, you can use fish or any animal oil.

Simply apply the melted product to the stains and forget about them for a few days.
After the specified time has passed, wipe the product with a clean soft cloth soaked in ammonia.

To clean light rust marks on chrome, prepare a mixture: mix lemon juice and table salt in a 1:1 ratio.
Apply the mixture to the stain and leave for 10 minutes.
Finally, simply rinse the treated area with water and wipe dry.

Cleaning rust from sanitaryware and tiles

Advice! If rusty traces appear in the toilet, you need to start checking with the internal metal parts from the toilet cistern. This is the first reason for rust to appear on plumbing fixtures. Replace the part, thereby eliminating further leakage in the toilet and contamination with red spots.

Oxalic acid and ammonia

Sprinkle the acid powder directly onto the wetted surface and leave to act for 1 hour.
Then, without rinsing, wipe the contaminated area with a sponge soaked in ammonia.
Rinse with plenty of water.

Hydrochloric acid

Perhaps one of the most effective ways to combat rust marks on sanitaryware.

Attention!

Do not forget about precautions and protection of mucous membranes and skin!
Don't use a brush!

Carefully pour a small amount of acid directly onto the stain.
Leave the liquid for a couple of minutes to act.
Then rinse the surface thoroughly with plenty of water.

Peroxide and ammonia

Mix the two ingredients in the following proportions: for 10 parts of ammonia, take 1 part of peroxide.
Apply the solution to red spots for 2 hours.
Then scrub thoroughly with a sponge and rinse with plenty of water.

Table vinegar

Apply the liquid to a clean, dry cloth.
Apply to the problem area for half an hour.
Then rub the dirt with the same cloth and rinse with water.

Kerosene

We proceed in the same way as with vinegar.

Attention!

Don't forget to wear gloves and ventilate the room!

It is necessary to moisten a rag with liquid and leave it on the rusty spots for half an hour.
Wipe the problem area with a kerosene rag and clean the glaze with plenty of water.
If necessary, this method can be repeated until the rust marks completely disappear.

Removing rust from bathtubs and other enameled objects

In a clean, dry half-liter glass jar, mix 100 ml of ammonia and 50 ml of hydrogen peroxide. Using a dry sponge or rag, apply the mixture to the rust and wait 10-15 minutes. Then simply rinse the solution with water and clean the surface with any household cleaning powder.
Prepare the mixture in a glass jar: add 2 tablespoons of salt to 100 ml of wine vinegar, mix and heat the solution in the microwave to a temperature of 60-65 degrees. Use the resulting mixture to wipe off the dirt and then rinse everything off with cold water.
Hydrochloric acid is a solution that perfectly removes rust marks from enameled metal products. Don't forget about precautions! Apply the mixture to a dry cloth and apply to the problem area for 10-15 minutes. After the cleaning procedure, thoroughly rinse the treated surface with plenty of water, then, if the method was used in the bathroom, wash with detergent and rinse again.

What is the best way to remove rust stains from plastic and acrylic?

A method that will help you deal with stubborn stains on any plastic or acrylic surface. Take a lemon and make a fresh cut. Sprinkle the cut with salt and wipe away any rust marks. There is no need to wait: wash off the treatment composition immediately. Repeat the procedure if necessary.
Pure rubbing alcohol can easily remove minor rust marks. Apply the liquid to a cotton pad and wipe away any dirt.
Undiluted white will help remove red marks from plastic window sills. Simply apply bleach to the stain and rinse off after 1 minute.

Attention!

Use white only on thick and dense plastic! It is not recommended to use it for cleaning plastic panels!

We fight traces of rust on glass

On this type of material, you can use any method described in this article. But products containing acids and the proven method of using Coca-Cola have proven themselves best. One feature: the time to clean rusty marks from glass is unlimited, that is, the interaction of a particular substance on a given material can be as long as necessary to completely eliminate the contamination.

Dear visitor! If you know other methods on how to remove stains, please leave your experience in the comments.

Source: https://pyatenet.ru/izvestkovyj-nalet-i-rzhavchina/kak-udalit-rzhavchinu.html

10 Effective Inexpensive Home Remedies for Rust on Chrome Surfaces

Rust that appears on chrome-plated products can spoil their appearance and ruin a pleasant impression. But don’t worry, any corrosion that appears can be quickly eliminated using accessible, inexpensive and effective home remedies.

Baking soda and tooth powder

Soda is an alkali that quickly and effectively copes with almost any contaminant. Mixed with tooth powder, it can even remove rust stains from chrome-plated products. Thanks to the chalk contained in the tooth powder, it has excellent mild abrasive properties.

The dry mixture must be applied to a damp soft cloth. Use this mixture to thoroughly rub the areas damaged by corrosion. After treating the surfaces and removing rust, rinse the parts with water. Finally, wipe the products with a dry cloth.

Salt and lemon juice

Lemon contains acid that can remove rust. If you add salt to lemon juice, it will be much easier to clean the damaged chrome surface. The ingredients for preparing the mixture should be taken in a 1:1 ratio. It is necessary to use fine-crystalline salt so as not to scratch the coating of the products.

Using a piece of cloth, apply the resulting mixture to the damaged areas of the parts and wipe off the rusty coating. For old and extensive corrosion, it is better to leave the salt and lemon juice to act for several hours. After this, it is necessary to wash off the dirt with water and wipe the surface of the products with a soft, dry cloth.

Potato

The raw tuber should be washed in water and cut in half. Then use half a vegetable to thoroughly rub the corroded areas on the chrome parts. You can grate the potatoes and apply the resulting gruel to the rust. Leave the mixture for several hours, then wipe the surface with a damp cloth. When the rusty coating disappears, it is necessary to rinse the treated parts with warm water and wipe dry.

Copper sulfate and hydrochloric acid

To prepare the solution, take one liter of clean water and carefully pour 50 g of concentrated hydrochloric acid into it. Then add copper sulfate in the amount of 200 g. All ingredients must be mixed thoroughly. When working with acid, you must be careful: use rubber gloves, protect exposed parts of the body, clothing, and do not inhale fumes.

Dip a cotton or gauze swab into the resulting liquid and treat the rusted areas of chrome parts with it. The exposure time of the solution is approximately 15 minutes. After removing contaminants, the surface of the products must be rinsed well with water and dried.

Dry cement

The construction mixture can be used as an abrasive. Dry cement will not only effectively remove rust, but also polish chrome surfaces. The composition should be applied to a soft cloth and rubbed over the damaged areas until all contaminants are removed. Remains of cement should be shaken off, the treated parts should be rinsed with plenty of water and wiped dry.

All these harms quickly cope with corrosion and do not harm human health. It should be remembered that when using acid, certain safety rules must be followed.

Source: https://gidpoplitke.ru/remont-i-uhod/samye-effektivnye-sredstva-protiv-rzavciny-na-hromirovannoj-poverhnosti.html

How to restore chrome: cleaning and restoration of chrome plating

Restoring chrome previously applied to the surface of a metal or plastic product is not so simple. Despite the high level of development of modern technologies, there are not many truly effective methods for solving this problem. It is especially difficult to carry out the chromium restoration procedure at home.

Chrome car trim before and after restoration work

A layer of chromium is applied to products for various purposes in order to not only improve their decorative characteristics, but also to form a reliable protective coating on them. Chrome-plated parts are well protected from corrosion; in addition, the chromium layer increases their strength and, accordingly, wear resistance.

The most common technology by which a chrome layer is applied to a product is the galvanic method. This method involves treating the part in an electrolytic solution through which an electric current is passed, and allows the formation of a protective layer of chromium on its surface. The same technology is used to restore chromium.

To restore small parts you will need a simple installation of galvanic chrome plating

How to care for chrome plating

Chrome-plated products can be found almost everywhere today, but most often chrome is applied to parts used to complete automobiles. Due to the nature of vehicle operation, chrome-plated elements of a car are subject to the most negative influence of external factors.

That is why special attention should be paid to the care of such parts. In order not to restore or change them in the future if the chrome coating becomes damaged or loses its attractiveness, it is enough to monitor their condition and regularly perform simple preventive maintenance.

Every car enthusiast who cares about the appearance of his vehicle is able to perform such work.

Fresh oxides on shiny car parts can be removed with a special paste for restoring chrome coatings.

To maintain the chrome plating in its original condition and prevent damage that requires its restoration, it must be regularly wiped with a foam sponge or soft cloth soaked in warm water. When performing such work, you should not use a rough cloth or a hard sponge, which can leave small scratches and abrasions on the protective layer, which will lead to its tarnishing.

It is important to know that the chromium layer on the surface of the product is quite critical to temperature changes. Therefore, in order to eliminate the need for a chrome restoration procedure, when operating a car in the cold season, it is best to protect chrome parts with a special oil spray, and carry out their cleaning and maintenance in a warm garage.

Manufacturers of car cosmetics offer a wide range of products for the care of chrome surfaces

Cleaning chrome parts

Any vehicle owner is interested in the question of how to delicately clean a chrome part, so as not to have to deal with restoring the chrome. To carry out such a procedure efficiently, it is not necessary to contact specialists; you can do it yourself, using the simplest means:

chalk, crushed to powder;
ammonia;
chrome polish;
microfiber wipes;
regular Coca-Cola.

How to clean a chrome-plated surface and restore its original shine using such simple means?

The most budget-friendly option for cleaning chrome plating involves using a paste-like mixture of crushed chalk, tooth powder and ammonia. A part cleaned with this mixture acquires its original shine. To maintain shine for a long period, it is advisable to cover the treated surface with a layer of colorless varnish, which will reliably protect it from minor mechanical damage.
Many car enthusiasts prefer to clean chrome plating with Coca-Cola, which is also a fairly effective method. This is explained by the fact that this drink contains orthophosphate acid, which has strong oxidizing and, accordingly, cleaning properties.
Chrome polishing is done using special pastes that can be purchased at any automotive store. This paste is applied to a microfiber cloth, with which the treatment is carried out.

Chromium restoration procedure

Restoring chrome parts is a much more complex procedure than restoring painted products to their original appearance. A damaged chrome layer can only be properly restored using special equipment and consumables, many of which cannot be purchased at a regular hardware store.

Therefore, in cases where a chrome car wheel or other chrome-plated car element needs to be restored, it is best to contact specialists. However, knowing how to restore chrome plating to give it its original attractiveness and protective properties will be useful for any car enthusiast.

Scheme of electrolytic restoration of chrome parts

The chromium restoration procedure is performed as follows:

Typically, chrome coatings need to be removed from rust, which can not only worsen their decorative appeal, but also significantly reduce their protective properties: corrosion begins to actively attack the base metal on which chrome is applied. First of all, traces of corrosion must be removed from the chrome coating to be restored, for which a grinding machine is used. Using such a tool, all the unevenness that is present on it should be removed from the surface being treated. At the initial stage of such processing, a coarser disk is installed on the machine, which is later replaced with tools made of fine abrasive. Finishing using a sander is done using a felt disc.
An element of the product that has been cleaned using a grinding machine, the surface of which should become perfectly smooth, must be degreased. For such a procedure, which can be performed several times, if the surface to be treated is heavily contaminated with grease and oil stains, you can use gasoline or kerosene. At this stage of processing, various contaminants and plaque are also removed.
After degreasing, it is necessary to remove traces of its implementation and only then immerse the product in a bath with an electrolytic solution to restore chromium.
In order for the restoration of the chrome coating to be carried out efficiently, and for the chrome layer to last as long as possible, it is advisable to perform the technological operation of pickling. This procedure is performed in a special solution consisting of a mixture of hydrochloric and sulfuric acids, into which the product being treated is immersed. After pickling, the part is very carefully removed from the acid solution and washed with warm water. This should be done using forceps.
The chrome plating process itself is performed in a bath with an electrolytic solution, which includes chromic anhydride, chromine, cryolite and sodium nitrate. Chromium should be reduced in the electrolyte for 7–10 minutes (the duration of treatment depends on the temperature of the solution used).

You can assemble your own device for restoring chrome, but at home, as a rule, it can be used to process parts that are small in size and have a simple shape.

Source: http://met-all.org/obrabotka/prochie/vosstanovlenie-hroma-polirovka-ochistka.html

How to clean rust from a bathtub and kitchen

Do you want to know how to clean rust from your bathtub and kitchen and get rid of rust stains forever from any surface? We have some tips for you.

Where there is metal furniture and water in close proximity, rust will certainly appear. This is especially true in bathrooms and kitchens, where iron and water are present in excess. Removing rust stains can be a challenge for every homeowner, but this guide offers some effective strategies to solve the problem.

Ideally, rust removal should occur after the surface has been thoroughly cleaned. This will help you figure out where the dirt is and where the rust spots are, which will make the target task easier.

How to remove rust from linoleum

First, clean the rust stains with a rag, warm water and liquid detergent. Wash the affected area as well as you can, then let it dry.

If rust remains on the linoleum, it’s time to move on to more drastic remedies. When using any new potent products, do not forget to carefully study the approvals and instructions for use, and also ensure that your hands and face are properly protected. Rust removers contain powerful chemicals that must be handled with caution and in a well-ventilated area. Moreover, you should thoroughly rinse off the product upon completion of work.

There are also very effective home remedies for removing rust stains, including cream of tartar (one tablespoon) and water (two tablespoons), then you need to make a paste. Apply the paste to the affected area and scrub thoroughly with a brush, then rinse with water.

Typically, when you wonder how to remove rust from a bathtub or kitchen, we are talking about chrome fixtures or tiles, which will be discussed later.

An effective method for removing rust from chrome surfaces is to rub the stain with a small piece of aluminum foil that has been soaked in water or vinegar. This solution works by transferring electrons between two metals, which reverses the corrosion process.

Just remember to test this method on a small, inconspicuous area to make sure it won't damage the surface.

How to remove rust from ceramic and porcelain surfaces

First of all, to remove rust from your bathtub or sink, you need to try wet pumice stone. Once the affected area is dry, use a rust stain remover. Be sure to follow the product label directions exactly and test it on an inconspicuous area of the bathtub.

Alternatively, you can try another homemade rust remover: mix lemon juice with borax or cream of tartar to make a paste and apply it to the stain. After applying the paste, wait five minutes, then scrub with an old toothbrush. For best results, you need to add a little more lemon juice and finish with salt. This solution can be left on for several hours, allowing it to dry before cleaning.

Finally, rinse the affected area with warm water to remove all traces of cleaning products and rust.

A steel bristle brush can be used in the most extreme cases. Be careful, a wire brush can damage paint or varnish and will scratch most kitchen and bathroom surfaces.

Helpful advice

Ideally, you should thoroughly clean the surface before looking for rust stains and considering methods to remove them. Remember to read cleaning product labels carefully, then check that the product is suitable for cleaning a given surface in an inconspicuous area, testing any strong product first.

Source: https://meclean.ru/kak-ochistit-ot-rzhavchiny-vannu-kuhnyu

How to remove rust from a chrome surface? — Comfort of Your Home

In everyday life, we often encounter the appearance of rust on various types of metal objects. Chrome-plated products, such as bathroom fixtures, are also susceptible to this problem.

Although there is an opinion that chrome plating is the most resistant to corrosion, this is far from the case. Under certain circumstances, when chrome is affected by several unfavorable factors at once, products may become covered with red spots.

In this article we will tell you how to remove rust from a chrome surface and how to avoid this problem in the future.

Chrome plating: concept and applications

Chrome plating is a special technology of applying a thin layer of chromium to metal products. Today, galvanic chrome plating is most often used. The process involves the deposition of chromium using an electrolytic solution onto a metal surface directly under the pressure of electrical charges.

The popularity of this operation is due to the fact that the chrome-plated part acquires improved technical and operational characteristics: strength, resistance to negative environmental factors. All this allows the metal to be used not only for finishing, but also for decorative purposes.

Chrome elements are widely used in mechanical engineering; electrical and plumbing equipment is created, which can be seen in almost every bathroom.

The disadvantages of this type of surface undoubtedly include low resistance to mechanical stress - small scratches, holes and chips appear on the coating quite quickly. If the material is used for external finishing work, then under the influence of oxygen (oxidation reaction) rust may also appear.

Causes of rusty plaque

The main cause of corrosion on the surface of chrome-plated products is excessive force and mechanical loads.

They lead to the appearance of small scratches and cracking of the surface layer of the material.

This happens as follows: the metal is covered with chromium, it oxidizes due to the negative influence of oxygen and other organic substances. This is how rust appears.

It is also worth noting that metal household appliances are constantly exposed to the aggressive effects of chemical reagents (soap suds, detergents, dust formations, mold). The feeling of cleanliness and comfort is lost - the coating becomes cloudy and loses its original natural shine.

Rust removers

Removing rust from metal surfaces can be done both with the help of specialized chemical compounds and with the use of folk remedies. It all depends on your personal preferences and financial capabilities.

Specialized compounds

Currently, the market offers a wide selection of compounds for effectively eliminating corrosion and rust stains. When choosing, you should be guided by the labeling, indicating the possibility of using the product specifically for cleansing. Among such products is WD-40.

To prevent the subsequent occurrence of this problem, it would be a good idea to use a protective polish for chrome. Professionals clean metal products with Doctor Wax and Autosol metal polish. Such polishing pastes help reduce wear on nickel-plated and other metal surfaces.

To clean chrome plating, you can also use multifunctional cleaning products, for example, Mister Muscle for plaque and rust.

Source: https://yutvoegodoma.ru/chem-ubrat-rzhavchinu-s-xromirovannoj-poverxnosti.html

How to clean chrome car parts from oxidation

Car enthusiasts who attach great importance to the appearance of their iron pet often wonder how to clean the chrome parts of their car. The chrome coating is designed to protect the metal from aggressive environmental influences and at the same time serves as a decoration that gives the car an elegant look. But over time, it also succumbs to corrosion, oxidation, becomes cloudy and becomes covered with cracks. To keep it in its original form for as long as possible, care is required.

How to care for a chrome surface

To ensure that the chrome surface does not lose its original appearance, it is necessary to periodically clean it. This must be done from the moment you purchase the car.

Caring for chrome car parts includes two types of work:

Actually cleaning the surface from rust and plaque.
Polishing the cleaned part.

If the damage to the parts is not too deep, you can do all the work to eliminate them yourself, without resorting to the services of a car service.

If the chrome on a part has peeled off or crumbled in the places of recesses or holes, it is impossible to restore the coating at home. In this case, it is necessary to completely remove the chromium and re-chrome the surface.

There are many products available for cleaning chrome car parts. You can purchase them at a car dealership or use household products available in every home. When purchasing car cosmetics, you should pay attention to the designations on the label indicating that it has the ability to restore chrome plating.

Cleaning can be done using sponges, rinsing off the cleaning agent with water, and final polishing is best done using microfiber or fluffy woolen cloth.

Removing rust

On the Internet you can find many tips on how to remove rust from a car. The choice of a specific method depends on how deeply it is ingrained into the surface of the part. Corrosion can be present in the form of small spots, or it can manifest itself in the form of deeper damage, accompanied by swelling and shedding of chromium. This most often occurs under the influence of reagents that are used on roads in winter.

To remove rust spots you can use:

Gas stove cleaner. It is mixed with soda one to one and a little warm water is added to form a paste.
A mixture of citric acid and salt.
Coca-Cola. It does a good job of cleaning small damaged areas.
WD-40.

In addition to available means, you can clean damaged areas using compounds specifically designed for caring for chrome surfaces. These are Doctor Wax, Soft99 Chrome Cleaner and others.

Do not use sandpaper for cleaning. With its help you can only scratch the part more.

In addition to rust, dirt and various oil deposits can accumulate on chrome parts. They must be washed off before cleaning. After the surface has been washed, you can begin to remove rust. When using special compounds, it is enough to apply a few drops on a rag and rub until the part begins to shine.

If homemade mixtures are used, they are applied to the surface and left for a while so that they enter into a chemical reaction with rust.

If cleaning doesn't help

There are times when the car has been washed and cleaned using all possible means, but rust and stains still remain on the chrome parts.

In these cases, the following can help restore their appearance:

use of chrome film;
chemical metallization.

The film containing chrome is easy to use and allows you to choose the color shade of the chrome part. It is enough to simply paste it over the desired surface.

You should not use cheap Chinese film. It is short-lived and may soon swell and peel off at the edges.

Before using the film, it is necessary to achieve maximum smoothness of the surface being restored. If it is severely damaged, the old chrome coating is removed.

Chemical metallization is a more complex process. Compared to the galvanic chrome plating method, it is much cheaper, but it will be extremely difficult to do at home.

Source: https://hozsoveti.ru/avto/ochistit-hromirovannye-detali

How to clean chrome car parts?

Regular maintenance of your car's chrome will highlight its elegance and convey its special design style. Chrome coating can not only prevent the formation of corrosion on the metal, but also improve the appearance of the surface. With improper care and under the influence of external factors, the glossy shine, over time, loses its properties. Following some recommendations will help maintain the same appearance and clean the chrome surface from plaque and rust.

Cleaning methods

To keep the chrome finish clean, it must be maintained regularly. Experts suggest doing this as follows:

First of all, it is necessary to wash the surface from various contaminants using a damp cloth or rinse off the metal with running water.
You can clean dirt using products such as glass cleaning spray, dishwashing detergent, acetic acid, alcohol, etc.
Next, you need to moisten a rag in the selected product and wipe the parts with it, and then rinse the coating again with clean water.
The chrome parts of the car that have become tarnished over time are rubbed with lemon peel or a cloth intended for polishing metal. The remaining lemon juice after the procedure is washed off with water and then wiped dry with a rag.

To preserve the appearance, the clean surface of chrome parts can be covered with car wax, avoiding getting into hard-to-reach places from which it will be difficult to remove the wax. To avoid corrosion formations, during winter it is worth lubricating the chrome on the car with Vaseline.

Return

Plaque removal

There are traditional ways to restore shine to a car, for example, vinegar or foil.

You can clean the chrome on your car from plaque with your own hands using the following budgetary means: baking soda, rubbing alcohol, acetic acid, foil, dishwashing detergent or glass detergent.

Moisten a rag with the chosen product and wipe the surface, and in the case of foil, simply rub it on the area where there is plaque.

Experts do not recommend using aggressive chemicals that contain chlorine or caustic acids, as this can lead to the formation of small holes and destruction of the chrome coating.

Return

Removing rust

You can try to clean the chrome of a car from rust only if the source has a small area and depth of damage.

To do this, you can use a mild and safe product in the form of acetic acid, baking soda, dissolved citric acid, or a specially designed polish.

After using these products, it is best to treat the cleaned area with a protective spray, which is sold in any automotive store, designed to prevent metal oxidation and the formation and spread of corrosion.

Return

Chrome polishing

Proper and regular cleaning can ensure that your car's chrome parts shine. It is worth thoroughly cleaning the chrome from external contaminants using special means and only then proceeding directly to the polishing process. To do this, a microfiber cloth or a piece of wool is suitable.

Polish only dry surfaces. You can use a special car polishing spray for chrome, which, in addition, will create a protective layer on the surface. Polishing should be done in a circular motion, going over the entire surface.

After this, leave the car for a while until completely dry, and then rub the area again with microfiber to achieve the best effect.

Source: https://HozSekrety.ru/avto/chem-ochistit-hromirovannye-detali-avtomobilya.html

Clean chrome surfaces quickly and easily

So you want to learn how to clean metal. There are many types of metal, and each has unique properties. Cast iron is porous and hates soap and water. Copper develops a protective tarnish which can make it more valuable. Stainless steel may become stained.

Chrome usually likes to be galvanized. All of these metals have their own characteristics, but they also have something in common. Each of these metals can be cleaned at home. Every metal can be cleaned cheaply using methods that are safe for you and the environment.

Chrome is a very soft metal that is commonly used for a wide range of everyday products such as faucets, pots and pans, bumpers and even chrome wheels and chrome rims. It is so soft that you will never find anything that is made entirely of chrome.

The chrome on those new wheels you're so proud of is actually an extremely thin layer that was applied via electroplating. We're not saying it's bad. It's just the way it is.

Again, chrome is very soft, and if your wheels (or pans) were solid chrome, you wouldn't want them.

The robots that may eventually destroy the human race are precisely why they will not be made of chromium. The chrome is extremely soft and extremely shiny (bad camouflage for a combat robot). These robots, however, will toast and drink from chrome goblets to our destruction while riding in future cars with chrome wheels.

Besides being extremely stable at high temperatures (which makes chrome a great material for mufflers, etc.), chrome plating is what gives our metal objects that nice bluish sheen we all love.

The problem is that while chrome is a very durable metal and can last for years, it quickly becomes dirty and dull. You'll need to clean your chrome often, and it's important to know how to do it correctly. Improper cleaning may result in accidental removal of chrome.

Each of us can easily appreciate the beauty and functionality of chrome: just look at your faucets. He is beautiful! Let's learn to take care of him!

The best way to avoid damaging chrome objects is to not let them get (very) dirty. The dirtier the chrome, the more effort and force you will have to use to clean it and the greater the risk of damage.

Avoid washing chrome pans in greasy water. The oil will leave a film that will be very difficult to remove.

For chrome wheels, remove them in winter. The salt on them is very hard and almost impossible to remove.

If you need to clean pots and pans or anything else that gets submerged easily, a sink full of water, a good dish detergent and a soft cloth is all you need. Clean the chrome trim on your sink handles and faucets while you wash dishes. For grooves and hard-to-reach areas, use a soft-bristled toothbrush.

You may need to move on to something stronger. Continue using the soft rag, but this time use vinegar as a chrome cleaner. Because vinegar is acidic. If you need it even more, sprinkle a little baking soda on a rag soaked in vinegar.

If you see rust peeking through the chrome trim, you'll need some aluminum foil: scrunch it up, dip it in vinegar (or Coca-Cola), and buff it off. Be careful not to apply too much pressure.

Scrub with medium force and re-dip the foil in the vinegar. Great for bumpers and bicycles. Coca-Cola works well but makes things a little sticky. Try the vinegar first.

No matter what you use, this method of polishing chrome should be followed by a good rinse with water.

Once you're happy with the cleanliness of your chrome, make sure you dry it really, really well. Chrome is absolutely notorious for developing water stains. When you're done cleaning the chrome, take a soft, dry towel and wipe the entire object down.

Now the last step. After polishing, if you want to keep your chrome looking better longer and reduce the frequency of cleaning, prepare a good chrome wax. In fact, almost any car wax made from carnauba will do. Wipe with wax in several layers. The first coat will fill in any pores and the second coat will provide all that nice shine.

Chrome oil

How to give metallic chrome surfaces gloss and shine? Easily ! We're telling you a useful secret!

You can restore the chrome look of your faucet in a matter of seconds. We will need any fatty oil (ordinary vegetable oil from the kitchen will do) and a small napkin (we prefer microfiber).

So, wet the napkin and wipe the tap. All! The faucet shines like new! Now water and soap stains will not settle on the greasy surface. Just leave a napkin and wipe the taps once every day or two. You don’t even need to moisten it with oil every time: the napkin will work for a long time until it dries.

How to clean a soap dish?

As we all know very well, soap sticks to the soap dish and dries out, forming an unaesthetic soap crust. And oil will help here.

Oil for cleaning various things

Wash the soap dish and apply a thin layer of oil. The soap dish shines, the soap does not stick. Naturally, you also need to wipe it every day for the effect to last.

Repeat the same procedure periodically with the toilet paper holder.

By constantly switching the buttons on the hood, you touch them with oily hands, as well as the surface around them. We treat the hood with oil: it will always shine!

And don’t forget about glass - it also shines under oil!

A bread maker, microwave and kettle, and stove grates also benefit from this treatment.

Also read about methods for cleaning brass.

Source: http://www.hnh.ru/nature/Clean-metal-surface-easily-and-quickly

How to remove rust from a chrome surface [best methods]

In everyday life, we often encounter the problem of rust on various materials. In this article we will tell you how to remove rust from a chrome surface. There is an opinion that chrome parts are less likely to corrode. But this is not so - chrome becomes covered with red spots no worse than ordinary iron.

What is chrome plating?

Chrome plating is a technology for coating metal surfaces with a thin layer of chromium. The most common method of chrome plating is the galvanic method.

The essence of this process is the deposition of chromium from the electrolyte onto a metal part under the influence of an electric current.

Such actions significantly increase the strength of the material, make it more resistant to corrosion and allow the treated metal to be used for decorative purposes.

As a rule, chrome-plated metal is used in plumbing and mechanical engineering. Unfortunately, the beautiful, shiny chrome surface eventually develops small scratches that reveal the metal underneath the chrome. Under the influence of oxygen, an oxidation reaction occurs, as a result of which rust appears on the surface.

Recommendations regarding the care of chrome elements of the car

To prevent any damage to the chrome surfaces of your car, you should first of all take care of them:

When washing a car with chrome elements, it is advisable to use warm soapy water. It is necessary to wipe all chrome parts with a soft cloth or sponge immediately after washing.
It is better to wipe the chrome-plated bumper with a cloth moistened with warm water to make it soft.

To reliably protect the bumper from corrosion, after cleaning it with any rust remover, it is necessary to generously lubricate the inside of the lining with “Lithol”.
For the durability of chrome-plated parts, exposure to strong temperature changes and high humidity should be avoided.

The water pressure during cleaning should be low. This will allow you to gently clean delicate surfaces.

From time to time, you can wipe the chrome parts with kerosene, then rinse it off with warm water. It is necessary to ensure that kerosene, gasoline or white spirit never remains on the surface of the parts. Kerosene is also used to degrease chrome before polishing.

To protect chrome parts, you can use a special varnish or technical Vaseline. These substances provide good corrosion protection, but may slightly degrade the appearance of chrome.

To remove traces of stains and grease, use cleaners.
For effective and high-quality protection, it is better to use products specifically designed for this purpose.

How to remove rust from a chrome surface at home?

If stains of corrosion do appear, the first step is to localize the source of its spread, clean and remove the rusted area. After this, coat the surface with oil varnish. To remove rust from a chrome surface, you can do without special expensive cleaners. You can find the substances necessary for this at home.

Baking soda

It is necessary to use this product with great care, as soda can cause small scratches. But if you apply it correctly, you will be able to remove rust from a chrome surface without damaging it. For this:

Mix baking soda with water to form a paste.
Apply the mixture to the damaged surface and leave for a few minutes.
Remove baking soda and dirt with a damp soft cloth.

Ground chalk or tooth powder:

A similar fine abrasive substance is applied to a flannel cloth and the surface is treated.
After cleaning the rust stains, remove any remaining powder and rust with a damp soft cloth.

Coca-Cola + foil

For this method of removing corrosion, you can use not only Coca-Cola. Pepsi and other similar drinks can easily cope with rust on chrome surfaces:

Wipe all chrome surfaces with a soft cloth to remove dust and dirt.
Wash the parts with warm water.
Take regular food foil, moisten it with Coca-Cola and sand the chrome parts, removing rust stains.
It is advisable to polish the surface with felt or a soft cloth after treatment.

Table vinegar:

Fill a plastic bag with vinegar.
Secure the bag over the pieces with a rubber band and leave for several hours or overnight. Small parts can be thrown inside the bag.

Salt and lemon juice:

Mix lemon juice and salt in equal proportions.
Use a soft cloth soaked in the mixture to treat the damaged surface.

GOI paste + motor oil:

Dilute GOI paste with two drops of motor oil.
Using a piece of felt soaked in the resulting product, treat the rusty surface.
Carefully remove any remaining rye and product using a clean, damp cloth.

Potatoes and laundry soap:

Cut the potatoes into two parts.
Rub each part in the cut area thoroughly with laundry soap.
Place the potatoes on the rusty spots for several hours.
Remove any remaining corrosion after a while with a damp soft cloth.

Copper sulfate and hydrochloric acid:

Mix 200 grams of copper sulfate and 50 grams of strong hydrochloric acid in 1 liter of water.
Dip a swab into the resulting solution and blot all rust stains with it.
Afterwards, you need to wipe everything with a weak solution of baking soda, rinse with warm water and dry.

WD-40

In case of severe corrosion, as a last resort, you can use the common product WD-40. It is applied like this:

Spray generously and leave for at least 15 minutes.

After time has passed, wipe the parts well.

The chrome will shine like new.

Removing rust from chrome surfaces of plumbing fixtures and kitchen items

We come across chrome surfaces all the time in our daily lives. Initially, they delight us with their brilliance and radiance in the bathroom and kitchen.

Soap scum, mold on plumbing fixtures, dust and dirt in any form play a big role in the loss of the beautiful appearance of such elements.

Regular cleaning and maintenance of chrome components is essential to maintaining a clean, shiny appearance. To do this, you can use the following tools:

Multifunctional cleaning products, as well as glass washing liquids (“Mr. Muscle”, “Help”, “Clin” and others). Clean chrome with a soft cloth.
Baking soda and carbonated water are natural alternatives to commercial detergents.
Traces of soap scum from chrome parts of plumbing fixtures can be removed using antistatic wipes or cooking spray.
To remove soap scum, you can mix baking soda with water, apply it to the surface and leave for a few minutes. After this, wipe the surface with a soft damp cloth.

Helpful tips for removing rust from chrome surfaces:

If rust has eaten through the chrome coating, mechanical treatment is necessary. The grit level of the sanding materials is determined by how deeply the parts are damaged by corrosion. In some cases, fine sandpaper is sufficient, in others, coarser grains are needed.

If mechanical friction removes a significant amount of metal, it is necessary to protect it by applying primer to weld seams and other areas.
The use of acids is possible only if they are immediately removed from the surface of the parts after processing.
Polish can be used if the damage is shallow. The presence of acid or anhydrous ammonia in the composition of polishes is not allowed.
To remove rust from chrome surfaces without damaging them, you can use steel wool. For particularly stubborn rust, metal wool can be combined with other cleaning products.
You can apply a protective layer of chrome polish, rust spray or deep penetrating lubricant like Prolong, NANOPROTECH, Nordtech, etc. Although these products are quite expensive, they are cost effective in the long run because they The wear of surfaces will be significantly reduced, which will save you from expensive rust removal procedures.
It is best to restore chrome parts damaged by corrosion using specialized compounds that can be purchased at automotive stores.

Removing rust from metal

It's not just chrome surfaces that can be cleaned using home remedies. Almost all of the above methods are quite effective in removing traces of rust on ordinary metal. In addition to them, you can also use the following tools to get the desired result faster:

You can remove rust from metal as quickly as possible using chemicals. As a rule, they contain phosphoric or oxalic acid. Under the influence of acid, rust is completely dissolved.

You can also remove rust from metal by using rust converters, which will stop the rust from spreading. The products are in the form of aerosols and are applied to the iron in a light layer.

You can remove rust from metal using abrasive tools. For this purpose, steel brushes and grinding machines are used. Be prepared for the fact that this process will require significant physical effort from you.

material

As you can see, you can remove rust from chrome surfaces and metal using simple products that are found in every home, or using special chemicals.

Regularly wash the chrome parts of your home plumbing fixtures to maintain the beauty of your surroundings.

With a little effort, the results will delight you with shine and shine for a long time.

Source: https://purplemint.ru/materialy/chem-ubrat-rzhavchinu-s-hromirovannoj-poverhnosti-luchshie-metody.html

How to restore chrome parts: clean, polish

Despite the fact that chromium is one of the hardest elements in nature, the coating inevitably receives various types of defects during operation. Let's look at how to restore chrome parts, clean, polish, and prevent further destruction of chrome.

Coating defects

Chrome plating is a thin layer of chromium that is applied to a metal surface, often pre-plated with a layer of nickel, through electroplating.

When chrome plating plastic, that is, a dielectric, the surface is mechanically processed to create adhesion, then a preliminary conductive layer is applied. The surface becomes less vulnerable to mechanical stress, and in the case of metal, also protected from corrosion.

The quality of the coating is influenced by chrome plating technology. But even the highest quality chrome can suffer various types of damage over time:

scratches, minor roughness;
microcracks;
cloudiness, loss of original shine;
plaque formation, yellowness;
the appearance of corrosion spots.

Damage to chrome-plated elements that can be restored at home does not include: peeling of the top layer of coating or chrome along with the nickel backing, lack of chrome in recessed areas of the product or around holes.

This type of defect is a manufacturing defect resulting from a violation of technology or the use of low-quality reagents. To restore such car parts, you will need to completely remove the old coating and apply a new layer of chrome.

Despite the labor-intensive and costly process, do-it-yourself chrome plating is a completely feasible task. Let's look at the step-by-step restoration of all types of damage.

Corrosion removal

Chrome protects metal surfaces well from rust, but it is also susceptible to corrosion. This is facilitated by aggressive reagents used on roads in the winter.

Through corrosion, in which the chromium layer is completely destroyed, can only be restored by reprocessing the part. Also, areas where rusting of the metal has led to the detachment of the chrome layer cannot be restored.

In all other cases, to remove corrosion from parts, you can use:

a mixture of baking soda, powdered gas stove cleaner and warm water. To prepare, dilute baking soda and powder in a 1:1 ratio, and then add water, stirring until it forms a paste;
As a substitute for baking soda, you can use citric acid and regular salt in a 1:1 ratio. Coca-Cola can handle small areas of corrosion;
WD-40 (colloquially called “Vedeshka”);
specialized cleaners for chrome. For example, Soft99 Chrome Cleaner or Doctor Wax (DW8317), Chrome Cleaner from GRASS, etc. Manufacturers of the products assure that the composition of their chemical reagents and fine abrasives can not only remove oxides and cloudiness, but also create a protective film. This way you can protect the parts from further destruction. Often such products are positioned as polishing pastes for removing cloudiness and abrasions. Therefore, when there is a large amount of corrosion, it is recommended to use them as the final stage of imparting a marketable appearance.

Procedure

To clean chrome parts, foil or metal wool (steel wool) is often used; if not available, you can use a regular sponge.

Never use sandpaper. This will remove too much chrome and cause scratches, thereby damaging the parts even more. In addition, you will additionally “expose” the surface, opening up pockets of corrosion for access to oxygen and moisture.

Removing rye begins with thoroughly cleaning chrome parts and adjacent areas from dirt, bitumen stains, and grease deposits. You can use car shampoo (without wax), special products for removing tar stains, foam engine cleaner and a regular degreasing solvent.

To use commercial cleaners for chrome parts, just drop a few drops on a rag and rub the surface until it shines. If you are using your own product made from acids and salts, then you need to apply it to the surface, leaving it for a few minutes for a chemical reaction.

For more effective cleaning, wipe the part with the soft side of a dishwashing sponge; You can remove rust from recesses, grooves or joints using a toothbrush. It is better to do this procedure several times. This way you can control the effect of chemical elements on the part.

An overly aggressive composition left for a long time will lead to the destruction of the excess chromium layer.

Polishing

You can restore chrome elements to their original shine and remove minor scratches by polishing. As a polishing paste, you can use GOI paste, which, depending on the size of the abrasive particles, is presented in several variations (NN 1-4):

NN 4 is the coarsest abrasive. Suitable for removing oxides and sanding deep scratches from parts;
NN 3 – medium abrasive, which will give a smooth matte surface without roughness;
NN 1-2 – numbers for finishing. Polishing will give the original shine and smoothness.

The number of required numbers of GOI paste depends on the degree of damage to the chrome plated part. For high-quality restoration, NN 1-3 will be sufficient. Most often, the paste can be found in bars, so when polishing it is permissible to use a couple of drops of clean motor oil.

Door handles should be cleaned after polishing if any oily deposits remain on them. For other elements, engine oil will create a protective film, which will protect the chrome elements of the car from reagents.

Among cosmetics for cars you can find special polishes for chrome.

For example, Doctor Wax (DW8317), Chrome Polish from Sapfire, Liqui Moli Chrom-Glanz-Creme or similar products from other manufacturers.

For manual polishing, simply apply the composition to a cotton cloth or microfiber and rub the surface until shiny. The best way to polish the surface is by using a polishing machine or special polishing wheels with an adapter for a screwdriver. It is advisable to polish the part in two stages:

felt circle at medium speed;
felt or soft foam pad (usually black) to add a final shine. You need to polish at medium speed. To avoid overheating the surfaces of parts, do not stay in one place for a long time; Periodically the surface can be moistened with clean water.

Before polishing the chrome parts of your car, thoroughly clean the surface of dirt.

Alternative Methods

If restoring chrome elements with your own hands does not give positive results, you can stylize the part as chrome using vinyl film. This method will allow you to restore the shine of the car's chrome elements without labor-intensive galvanic treatment. Among the manufacturers of chrome effect films are:

Nippon Carbide
3M Scotchcal
Hexis
Avery

You should not expect elasticity and a mirror effect from cheap Chinese film; also, low-quality film may swell or peel off at the edges over time. It is worth considering that, compared to conventional vinyl materials, covering with chrome film has a number of features. The advantage of this restoration is that it becomes possible to choose the color shade of the chrome plating.

Therefore, if you want to do the work yourself, choose only high-quality materials - this way the chances of replicating the original chrome are much higher. If chrome peeling or large cracks and pockets of corrosion occur on an old part, then all the old chrome will have to be removed to obtain a smooth surface.

To do this, you can use abrasive devices (for example, a sandblaster) or chemical solutions.

The second alternative is chemical metallization. Despite the fact that the coating is cheaper than the electroplating method of forming chromium, the quality level is quite acceptable. The processing takes place using special equipment, so restoring chrome parts with your own hands will be extremely expensive.

Source: https://autolirika.ru/remont/kak-vosstanovit-hrom.html

THIS IS INTERESTING: How to clean blackened silver at home