How to remove rust from a car using a battery

How to remove a dent on a car?

Car dents are annoying and often cause high repair costs. It is recommended to repair dents only conditionally. A cheap alternative is dental repairs. Here's how it works.

➤ Removing dents and impacts yourself

➤ Methods for removing dents

Dents are not pleasant to look at, they reduce the value of the car and are guaranteed to spoil the mood of every car owner. However, often the damage is not repaired due to the high cost of repairs or is difficult to clean up on your own. But there are suitable specialists for this problem. How much does the repair cost, when is it worth it, and is it possible to fix a sheet metal dent with a little tact.

The specialist presses, pulls or rubs dents on the sheet with special tools.

Primarily, specially trained technicians who repair minor to medium-sized damage, such as dings from door edges or hail, without having to replace entire body parts or repaint them. In order to be able to remove every stroke, they undergo a training course that can take several months and cost several thousand euros. Such a specialist needs little for his work, but he needs expensive tools.

Small dent - high repair cost? Can't be! Impacts can be properly repaired by a professional for only 35 euros.

This type of repair provides a number of advantages: the original paint is preserved thanks to professional processing. It doesn't take much time to paint - it protects your wallet and the environment at the same time. Prices for small dents start from 35 euros. On average, a dent measuring two centimeters costs from 60 to 100 euros, of course, depending on the number, depth and location. After this, the damage is no longer visible.

Correct dents

To save on costs, some car owners want to remove small dents or bumps themselves. There are countless DIY instructions and repair kits available. Dent repair kits are available from just €15.

Most only contain a hot glue gun, matching glue sticks, and polishing pads.

If you add 100-150 euros you will get better and more extensive kits with a slide hammer, tension blocks with rubberized support legs and plastic scrapers to remove any remaining adhesive.

Dent removal methods

There are several ways to remove dents, independent of each other: using a strong suction cup, a vacuum that is placed on the dent and pulls the dented sheet metal back, pulling it out. Or using a glue gun.

A suitable adhesive button is required, onto which the appropriate amount of hot glue is applied, which is then pressed onto the body. The dent is then pulled out. It is important to make sure that the sheet does not stretch. This also applies to working with a rubber hammer, which can also be used to straighten damaged metal on a car.

Our advice: To prevent paint from cracking and elasticity, before each treatment, you must thoroughly dry the area in question with a hairdryer.

For beginners, it should be said that dent repair is an art in itself. Too bold hammer blows can pull the sheet in the opposite direction. Professionals always work their way from the edge to the middle of the bulge, “massaging” the damage, beginners usually start right from the center of the problem.

This can lead to damage that even a specialist can no longer repair. If you damage your car further, you may increase the cost of repairs due to failed attempts. When you compare the time and cost to having it repaired by a professional, doing the repairs yourself is usually not worth it.

Especially when you consider that it’s not just about appearance, but also about preserving the value of the car.

Even with great care and talent, one should refrain from flat hits, which extend to several auto parts.

conclusion

If you want to remove dents on your car, you can do it yourself or have it done professionally by calling in a professional. Therefore, we recommend that you find out about experienced companies in advance and get a price quote.

Source: https://infoshiny.ru/stati/kak-ubrat-vmyatinu-na-mashine

Apple Cider Vinegar and Its Unexpected Uses -

Apple cider vinegar, as it turns out, is used for more than just cooking! I’m just sure you didn’t even know about its simply incredible properties to influence rust and grease! Do you know how to use it to clean your refrigerator from unpleasant odors? If not, then this article is what you need.

Few people know that apple cider vinegar is not only a healthy addition to a variety of dishes, but this substance is an indispensable assistant for every housewife!

Today we will share with you the most unusual ways to use apple cider vinegar.

To improve the taste of a dish

If you accidentally over-pepper the soup, add 1 teaspoon of apple cider vinegar to the pan to neutralize the spice.

For polishing wood

To polish old furniture, simply wipe it with a solution of apple cider vinegar and water. To do this, mix apple cider vinegar and water in a ratio of 1:8, and then add a small amount of olive oil.

To get rid of fat

Vinegar is a great helper in the fight for cleanliness! To do this, just prepare a mixture of vinegar and water in a 1:1 ratio, apply it to the contaminated surface and remove it with a special napkin.

To get rid of weeds

Apple cider vinegar will help tidy up your flowerbed or seedling beds. To do this, make a solution of apple cider vinegar and water in a ratio of 2:1, then apply this solution to the weeds.

To get rid of hiccups

Take a piece of refined sugar, dip it in apple cider vinegar, quickly bite into it and swallow.

To extend the life of the bouquet

Add 2 tablespoons of apple cider vinegar to 1 liter of water, then place the cut flowers in a vase of vinegar water. You will be surprised, but the bouquet will last much longer than usual.

To wash glass, plastic and chrome

Dilute vinegar with water in a 1:1 ratio and wipe the contaminated glass or plastic surface with this mixture. By mixing a little vinegar with baking soda, you can clean stainless steel and chrome to a shine.

To remove musty smell

It’s not always possible to keep track of the food in the refrigerator: every now and then something will spoil much earlier than we expected. To remove musty smells from your refrigerator or food container, simply dip a napkin in apple cider vinegar and wipe the dirty surface with it.

To remove rust

To remove rust from small objects, just boil them in vinegar and then rinse with water.

To get rid of scale

Scale in a kettle is a problem for every clean housewife. Apple cider vinegar will help get rid of it: just boil a mixture of vinegar and water in a ratio of 1:8 in a kettle.

Do you want to save on cleaning products, but replace them with decent quality ones, without harmful chemicals? Then you should stock up on apple cider vinegar, which will become an indispensable assistant not only in cooking, but will also make your kitchen and bath shine, ridding them of rust and grease.

Source: https://veronikaa.ru/2020/01/20/10-strannyh-primenenijah-jablochnogo-uksu/

Removing rust from a car body: a simple solution

Metal corrosion is the main and most dangerous enemy of a car. Removing rust is a labor-intensive and unpleasant, but extremely necessary procedure. You need to remove rust from metal as early as possible - before it begins to spread and destroy the car.

Wheel arches most often suffer from rust.

[contents h2]

How to remove rust

They fight corrosion using two methods - mechanical removal of rusted areas and chemical stopping of destructive processes at the molecular level.

Most often, methods for removing rust from metal are combined, but in any case you need to know: it will not be possible to completely stop corrosion, you can only slow it down.

That is why prevention and reliable protection of surfaces from damage is so important: the slightest pinpoint rupture of the paint coating to the substrate means the beginning of a self-developing process of metal oxidation, which, if no measures are taken, will completely destroy the part and the car.

Mechanical removal. Rust can be removed from a car body mechanically - manually or using special devices. The choice of product for removing rust from a car body depends on the area and degree of damage. For manual cleaning use:

• abrasive coarse-grained skins;
• brushes with iron rods (wire).

The hardware used to remove rust from metal speeds up and facilitates the processing process:

1. drill attachment for removing rust;
2. orbital sander with a set of abrasive wheels;
3. angle grinder (grinder);
4. sandblasting machine.

Rust must be stripped down to metal.

It is advisable to remove rust manually with sandpaper or a brush in small areas, as this is painstaking work that takes a lot of effort and time. Among the advantages of this method is the possibility of careful processing, during which a thin layer of metal is removed.

Using attachments for a drill, grinder or grinder speeds up processing several times, but removes a thick layer of metal, which is not always advisable.

Not every car enthusiast has a sandblasting machine, but it intensively and efficiently cleans the metal surface. The operating principle of the device is to remove corrosion products using a strong jet of sand directed at the source of the lesion under pressure. A stream of fine grains of sand effectively removes rusty debris, leaving healthy metal intact.

Chemical transformation of rust. For these purposes, many different means are used, which are divided into three groups:

• rust converters;
• folk remedies for removing rust;
• acids (phosphoric, sulfuric, hydrochloric, acetic).

Chemicals for converting rust

The use of phosphoric acid to remove rust has become widespread among car owners. Treatment of rust with orthophosphoric acid occurs as follows: apply a thin layer of the composition to the rust stain, wait about half an hour while the reaction process takes place, then wipe the area dry.

The acid not only “eats” the rust, but also covers the metal with a phosphate film, which has moisture-repellent properties and stops the oxidation process (further development of corrosion).

Phosphoric acid for rust removal is used in the form of a 30% solution; compared to other acids, it destroys corrosion and has a more gentle effect on the metal.

Advice. It is not recommended to inhale chemicals formed during the evaporation of liquids used for metal processing, so wear a respirator or a special mask when working.

You can remove rust from metal using the old-fashioned method by mixing kerosene (10 parts) with paraffin (1 part). The composition prepared in these proportions is kept for a day, then applied to the rusty area and left for another half a day, after which the softened mass of red flakes must be removed.

Treatment of places where corrosion begins

Ready-made rust converters are accessible, popular and inexpensive products available in the form of pastes, sprays or liquids. Depending on which substance predominates in the composition, converters are divided into zinc, for example, “Zinkar”, and acid, with the aforementioned phosphoric acid (Hi-Gear, Runway). The elements of zinc and manganese form a protective film on the surface and increase the resistance of the metal.

How to choose funds

In practice, rust on a car body can only be combated using complex methods - mechanical cleaning plus chemical action. Therefore, every car enthusiast should have hardware in his arsenal to remove rust from metal and periodically purchase chemical converters.

To clean the surface from corrosion, you will need a set of abrasive sandpapers with a large fraction of P80, P120, P240. First, a coarse-grained sample (P80, P120) is used, and then the marks from it are sanded with medium-grain sandpaper (P240). It is convenient to carry out grinding with an orbital machine or grinder. In this case, try not to remove too thick a layer of metal.

To clean large pockets and large areas of corrosion, it is advisable to use a sandblasting machine - it will quickly and most gently separate the rusty layers without damaging the metal.

Large areas are sandblasted

Among chemical preparations, Tsinkar enjoys a good reputation. The effectiveness of this anti-rust product for cars due to the two active components zinc and manganese is 2 times higher than that of other converters produced by Russian manufacturers, which contain phosphates of one metal. In addition, the price of the drug is affordable, and reviews from car enthusiasts are positive.

The paste-like anti-corrosion agent for metal “Omega” based on orthophosphoric acid received good reviews. It is applied under normal conditions at room temperature, forms a phosphate protective film, and its feature is easy removal from the surface: after the reaction has occurred, the product peels off on its own.

We remove corrosion from the car body

After identifying the source of corrosion, the rusty metal is physically removed: red flakes, bubbles on the paintwork, as well as the top layer of paintwork from areas close to the affected area.

If it is a small chip, then you first need to pick it out with a regular knife or awl, and then continue removing rust from the car body using abrasive sandpaper or hardware.

The area to be treated should be cleaned to a flat, smooth metal surface, capturing areas close to the defect and making a smooth, wide transition border to the paintwork.

Mechanical rust removal using a special tool

The selected product is applied to the cleaned surface according to the instructions (most often it is a ready-made converter) and left for some time to react. For different compositions, the chemical reaction can last from 10 minutes to 12 hours - it is important to withstand the entire period.

After the period of exposure has expired, wipe the rust remover on the metal with a cloth and degrease the surface.

Chemical treatment can be repeated several times - the likelihood of complete destruction of corrosion, as well as the resistance of the metal due to the formation of a protective film, will increase. The optimal number of treatments is 2. After the last procedure, do not forget to degrease the surface - in this case it is completely ready for applying primer or paint.

What else do you need to know

While working, you should never forget about your own safety measures - you should not inhale chemical vapors or expose your skin and eyes to drugs. You should work in a ventilated or ventilated area, wearing long sleeves, gloves, and a respirator.

The ambient temperature affects the effectiveness of the treatment - in the heat, the metal corrosion agent evaporates intensively. To prevent the effectiveness of the composition from decreasing, you can moisten a sponge or cloth with it and place it on the treated area.

The best remedy for rust on metal is prevention and prevention of corrosion. You should carefully inspect the car body every month for chips and scratches, regularly carry out anti-corrosion treatment: apply a suitable rust remover to the damage, after 20 minutes clean off the flakes from the surface, degrease and paint over the treated area with a suitable color enamel or retouch.

During work, glass, untreated areas of paintwork, wiring, auto parts or interior trim should be protected with film or paper from contact with rust remover - acid can corrode not only rusty metal.

Effective cleaning of calipers from rust is possible with a sandblaster. Of the chemicals used, phosphoric acid or “Rust Destroyer B52”. Hydrochloric acid has a stronger effect, but it must be completely washed off after treatment.

WATCH VIDEO INSTRUCTIONS

Car owners can remove corrosion themselves. Even if you entrust this work to car service professionals, you still do the initial processing yourself. The further life of the part and the operation of the car depends on how conscientiously and carefully the procedure is carried out.

Source: http://krasimavtomobil.ru/repair/udalyaem-rzhavchinu-na-kuzove-mashiny-prostoe-reshenie/

OMLauncher - “classic” launcher for the game World of Tanks

“If you don’t like something, do something that suits you.”

— [ZBT] [1.7.0.2 #163/0.4.4] OMLauncher — “classic” launcher for the game World of Tanks (RU/EU) from DrWeb7_1. We remove forced WGC and remove surveillance of you.

Wargaming Game Center (WGC) is still a raw piece of shit. And the problems with forced transition to it have not become less. Updates for this are rarely released, fixes are not visible.

And since the fall, all sorts of new features from WG (bugs) have appeared: installing and downloading the game for 6 hours, has that happened? Forced reinstallation of the game from 0, has this happened? And a bunch of other errors. Many have come to terms with this, of course. But you (players) are users (consumers) of the product and should receive the service in its best quality!

Fortunately, World of Tanks has a strong community of modders, although it’s not as extensive as it was before, but it’s the modders who come up with new things (and not like big ones stealing ideas from CD) and help to play tanks more comfortably in the 10th year of their life.

So, user DrWeb7_1 from the [HJLO] clan has been quietly playing on the old WOT launcher since the beginning of the year, because WGC simply cannot stand it. He, in fact, made it possible to launch that same normal, old WoT launcher. It's called: OMLauncher.

Now the project is in the closed beta stage, because simply not everything is ready yet.
But overall everything works and is supported. Any reasonable person can get into the CBT. True, the design of the launcher (window) the author uses is from 2015, because the launcher window that was before the office. He also doesn’t like the termination of support at all: “I somehow like the old one better, not to mention that all my mods are in one way or another dedicated to the old World of Tanks.”

Greetings to all who stopped by! What you are seeing now is a restored launcher for World of Tanks that is still updating the game even after the official end of support on November 5, 2019. Currently undergoing closed beta testing, applications for participation are open.

Questions:

*Who is this for?
— For those who do not like Wargaming.net Game Center or technically cannot use it.

*Is this legal?
- Legal. And even the CPP replied that there are no restrictions on update methods. Answer:

* What clusters are supported?
- EU and RU.

* Is it possible to transfer it along with the game client to another folder?
— Yes, the launcher is not linked to the registry and user folder.

* What languages ​​are supported?
— For EU - the entire official set, for RU - exactly the same + English language based on localization for the European client. Before passing the client integrity check, switch the language to any other supported language, otherwise the process will fail.

* Where are the game files downloaded from?
— Launcher — from the OMLauncher update server. Localization, client, SD and HD content from the corresponding official Wargaming servers.

* Why is it not a new launcher design (the one that lasted until the official end of support)?
“It made me feel a little burnt when it was introduced in 2015.” And somehow I like the old one better, not to mention that all my mods are in one way or another dedicated to the old World of Tanks.

* Is it possible to transfer an already installed client from Wargaming.net Game Center to a restored launcher?
- Yes, you can. To do this, you will need the game_info.xml file, which is located in the game folder. Please note that the installed game version must be at least 1.6.1.0.

* Is it possible to perform a similar operation for an instance installed through the official WoTLauncher and subsequently blocked by the offer to switch to Game Center?
- Yes, you can. In this case, I need the WoTLauncher.cfg file from the game folder to change the update server address and unblock the launcher. The requirements for the client version are the same, minimum patch 1.6.1.0.

* What if he wasn’t blocked by the offer to switch to Game Center?
- Likewise, just send me WoTLauncher.cfg from the game folder, I’ll do the rest of the work myself. The requirements for the client version are the same, minimum patch 1.6.1.0.

*Is it free?
— Yes, there is no charge for using the launcher. But if you want to support the author with a pretty penny, you can do it through DonationAlerts.

*Which version does it run by default?
x32 or x64? — x32. The original launcher does the same.

List of changes (last three updates):

0.4.4 (07.01.2020)

• Cleaning the launcher from outdated code
• Updated "Play" button
• Fixed a bug with the presence of a context menu button even when there is no installed game client (or when passing an integrity check)
• Fixed a bug with the incorrect size of the text tooltip appearing above the “Play” button when hovering over it
• Fixed incorrect display of a pop-up window prompting you to wait for the client update to complete (applicable to the HD client)

0.4.3 (05.01.2020)

• All localizations supported by the launcher now have a context menu with a choice of game launch mode
• Fixed incorrect context menu proportions

0.4.2 (05.01.2020)

• The context menu has been restored, prompting you to run the game in safe mode or with graphics settings reset)

What's left to do?

• Automate the process of receiving information about updates from the Wargaming.net Game Center server and configure its “conversion” into the WoTLauncher format.
• Optimize the server side of the launcher.

Forum topic: koreanrandom.com/forum/topic/53940 -
Discord fashion community: discordapp.com/invite/muHc4yB
Author's profile at the office. forum: .cc/ag8c69

Did you like the news?
Then give her a like, and don’t forget to leave yours. And also, add our site to your favorites (press Ctrl+D), don’t lose us.

Starting tonight, players will receive individual, limited

Dear players! The DDoS attack we reported on last week

Hello. And according to our schedule, we have lags and high ping on the World of Tanks servers. Have a nice one

Tomorrow, January 21 from 15:00 to 16:30 (Moscow time) on the server of the general test version 1.7.1 of World of Tanks

Well, based on the results of test 1.7.1, have you changed your mind about downloading these double-barreled guns? By the way, the shells

Again we observe lags and high ping on the WoT and WoT Blitz servers. In particular servers

Mon Tue Wed Thu Fri Sat Sun

1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31

Source: https://wotexpress.info/news/world-of-tanks/omlauncher---klassicheskiy-loncher-dlya-igry-world/

How to remove rust using a battery and clean metal? | mk-soyuz.rf

Sometimes metal corrosion causes a lot of inconvenience. It usually appears wherever there is metal. For example, a sink, a bathtub, a car, a bicycle, a body, etc. Some craftsmen have learned to remove rust using a battery. But how to do this? Let's look at this below.

How to remove rust using a battery?

Before you begin this procedure, you will need to know the following things:

1. Special acid for soldering. One bottle is required. The price tag is within 25 – 35 rubles.
2. Salt chemistry AA batteries. They are checked using a magnet. If there is no attraction, then it is salty. These batteries are not expensive, about 20 rubles.

   This type of battery has a zinc casing.

3. A small cloth, cotton pads or bandage. You should choose one thing.
4. The wire.
5. Special clips for fastening or some kind of elastic band.
6. Water and a little baking soda to eliminate the acid.
7. Paint – will be required if the item has been painted. For example, a car may have a rusty scratch.

   We remove the rust and then paint over it.

Step-by-step action plan

1. Remove the label from the battery.
2. We wrap the power source with wire. Before this, we expose its two parts by 2 cm. Next, we divide the cores into two equal sides. After that, we wrap them around the battery. The part of the wire that has insulation is also wound around the battery for several turns.

3. We fix the wire using a regular rubber band.
4. The second part of the wire with the exposed area is connected to the crocodile.
5. Place a cotton swab in the center of the negative end of the battery and secure it with an elastic band.
6. After this, moisten the cotton wool with soldering acid.
7. We attach the free wire to the positive pole of the battery.
8. We lean our device on the side where the cotton wool is against the rust. The reaction begins to take place and after some time an applied layer of zinc is visible in the place of the red spot.

   Removing rust with a battery was successful!

After this procedure, the corrosion process will no longer occur. All that remains is to get rid of the acid using a soda solution.

You can watch the entire procedure in more detail in the video!

This makes it quite easy to remove rust from metal! Good luck!

Source: https://xn----ntbhhmr6g.xn--p1ai/batarei/kak-ubrat-rzhavchinu-s-pomoshhyu-batareyki

How to remove rust using a battery

Sometimes metal corrosion causes a lot of inconvenience. It usually appears wherever there is metal. For example, a sink, a bathtub, a car, a bicycle, a body, etc. Some craftsmen have learned to remove rust using a battery. But how to do this? Let's look at this below.

Step-by-step action plan

1. Remove the label from the battery.
2. We wrap the power source with wire. Before this, we expose its two parts by 2 cm. Next, we divide the cores into two equal sides. After that, we wrap them around the battery. The part of the wire that has insulation is also wound around the battery for several turns.
3. We fix the wire using a regular rubber band.
4. The second part of the wire with the exposed area is connected to the crocodile.
5. Place a cotton swab in the center of the negative end of the battery and secure it with an elastic band.
6. After this, moisten the cotton wool with soldering acid.
7. We attach the free wire to the positive pole of the battery.
8. We lean our device on the side where the cotton wool is against the rust. The reaction begins to take place and after some time an applied layer of zinc is visible in the place of the red spot.

   Removing rust with a battery was successful!

Read also: Radar detector sho me g800 str

After this procedure, the corrosion process will no longer occur. All that remains is to get rid of the acid using a soda solution.

You can watch the entire procedure in more detail in the video!

This makes it quite easy to remove rust from metal! Good luck!

In general, I bought a car with a wing. There were no saffron milk caps. Not even a hint of them, the previous owner drove in Bugulma with such a painted wing after an accident for a year and a half.
I will bring the car to Kazan, I drove here for 5 months and it was all covered in saffron milk caps, maybe their reagents are not sleeping on the roads .

And I accidentally came across a video on YouTube where they remove rust in this way and galvanize metal using a battery, and I also decided to try to experiment since he gave me a different wing where there was a small dent and the paint peeled off (I’ll probably install it in the future)

And so we will need 1 soldering acid, it costs from 30r2 salt batteries. it is the salt ones that are usually the cheapest, they can be checked with a magnet; they do not magnetize; 3 cotton pads or a bandage; 4 wire and a clip to secure it to the act; 5 soda and water; after this whole procedure, wash this place (to neutralize the acid)

6 Well, I bought some paint to tint it at a basin store

Source: https://skoda-rapid.ru/avtomobili/kak-ubrat-rzhavchinu-s-pomoshhju-batarejki/

What is electrolysis and how to use it to remove rust from a body

Corrosion on the car body is a popular problem for car drivers. Read on to learn what electrolysis is and how to use it to remove rust from a body.

What is electrolysis?

Electrolysis is a redox reaction that occurs on electrodes under the action of a constant electric current through an electrolyte melt or a special acid solution.

You can also point out that this is a set of processes that occur in a soda-ash solution when an electric current passes through it.

Electrolysis is used to remove rust. During its operation, iron ions go to a clean electrode and are removed from the metal. The process of using electrolysis in everyday life, industry and car service was called the electrochemical method.

It is worth pointing out that the electrochemical method is used only when the parts have complex geometry. Often combined with a chemical method.

The latter consists of exposing the body to cleaners, organic acids and professional products with protective components that form protective films on the metal.

As an aside, electrolysis is one of the best methods to gild or coat metal with copper and gold. It is also a way to produce aluminum, copper, hydrogen, hydrogen peroxide and manganese dioxide.

How to remove rust from a body using electrolysis?

Rust or corrosion is the decomposition of iron through oxidation, which is caused by exposure of the metal to particles of water and air. Corrosion can be electrochemical. It is caused by excess humidity in the air.

Often, metals become covered with rust because the storage conditions for the products are not met. It also appears on them if you choose the wrong detergent.

It is very difficult to get rid of corrosion, since most of the catalyst is removed, but it is impossible to completely get rid of it. As a result, rust appears again.

You can remove rust using an electrochemical method or electrolysis by taking a current source, an electrolyte and metal. First you need to clean up the resulting corrosion.

Then connect metal to the phase terminal and apply acid. When the current approaches the acid, oxygen begins to form and the substance located on the surface begins to boil.

As a result, corrosion begins to disappear. The metal cleaning process continues for some time. Upon completion, you only need to prime and paint the cleaned surface.

In general, electrolysis is a physical and chemical process that consists of the release of dissolved particles on electrodes and is considered the result of secondary electrode reactions.

It occurs when an electric current passes through a solution containing an electrolyte melt. Electrolysis helps remove rust from the body and do it as efficiently as possible.

Source: https://dixnews.ru/chto-takoe-jelektroliz-i-kak-s-ego-pomoshhju-udalit-rzhavchinu-s-kuzova/

This battery-powered device will protect your car from corrosion.

The master showed how to make a very simple but at the same time very effective device for combating corrosion on a car. The device is so simple that even a child can make it. To make it, we will need ordinary salt batteries, and it should be written on them that these are salt batteries. These are usually the cheapest batteries.

Alkaline batteries are not suitable for us, since their body is not made of zinc, but these ones have a body made of 99.9 percent pure zinc.

Inventors shop at a budget Chinese online store.

We take one battery and strip its body of the insulating film. To do this, simply cut the film. You will need a piece of wire. We wrap this wire around the battery, but to ensure that the wire holds well, we wrap it with a regular rubber band.

DIY electronics in a Chinese store.

We attach an electric clothespin to the other end. Then you will need regular cotton pads. We take one disk, wrap it around the battery and secure it with an elastic band. The result was a device to protect cars from metal corrosion.

Next, we take regular soldering acid orthophosphoric acid and moisten the cotton wool that we attached to the batteries. Well, that's all guys, the device is ready. All that remains is to connect it to the car battery.

We connect the electrical clothespin of the device to the positive terminal of the battery and now we can remove rust, not just remove it, but even galvanize the metal.

A typical source of corrosion on a car's wheel arch. We won’t even clean this rust, we will immediately treat this place with the device. We simply press the moistened cotton wool to the place of corrosion, the rust itself will go away, and the metal that was rusty will be covered with a layer of zinc.

You just need to press and hold for a few minutes. The zinc from the battery body will transfer to the metal on the car body and this place will no longer rust in the future.

You can see how the rust is almost all gone. After galvanizing, there was no trace of rust left, only a small thin layer of zinc appeared. This is clearly visible - it has a silver color.

Neutralize the acid

After the rusty area has been treated with a manual galvanizer, the effect of the acid must be neutralized. For this we need regular baking soda. Pour a little into a glass, dilute with water and the composition for neutralizing the action of the acid is ready. We simply soak a cotton pad in this solution and treat the area that we have galvanized. Look how it sizzles - this is the acid we used as an electrolyte being neutralized.

Varnish painting

Budget for painting this place with regular nail polish. Choose the varnish to match the color of your car. There will be the cheapest pencil for touching up chips on a car.

This was such a budget renovation. From a distance of two meters this place is almost invisible, and most importantly, it will not rust anymore.

If you liked my method of fighting rust, please like it.

Source: https://izobreteniya.net/eto-ustroystvo-s-batareykami-zashhitit-vash-avtomobil-ot-korrozii/

Removing rust from a body using an electrochemical method

Rust on the car body will appear sooner or later. Starting with a small, harmless “red”, it will eventually turn into a through hole. Traditional methods of combating this scourge - stripping down to metal, priming, painting - rarely give a lasting effect. Usually after six months the entire operation has to be repeated again. Removing rust from a car body using an electrochemical method gives the best results.

What causes rust

That red coating - loose or dense, which we traditionally call rust - is only a consequence of the process of destruction of iron, which bears the scientific name of corrosion. There are two objective reasons for its start.

1. The interaction of a metal with chemically active substances that oxidize it, thereby destroying it. They are all inorganic compounds consisting of oxygen and hydrogen. The “simplest” of them are water and oxygen from atmospheric air. More complex are water-soluble alkalis and acids resulting from this dissolution;
2. The interaction of metals with each other in the presence of an electrolyte - a conductive liquid. This is, for example, a dissolved anti-icing agent that is used to treat roads in winter.

Chemically pure water – without foreign impurities – water, like oxygen, does not interact very actively with iron. The process of its destruction can last for decades. Under natural conditions, the chemical oxidation reaction is accelerated by sea salt and acids formed during the interaction of substances emitted by volcanoes. The modern city is much more active than volcanoes and is actually a chemical factory for the production of everything that destroys the metal of the body.

Why is rust difficult to fight?

The most common cause of chemical corrosion encountered by car enthusiasts is the interaction of metal with water, resulting in the formation of iron hydroxide - Fe(OH)3, a loose reddish powder. It is a catalyst - an accelerator of chemical reactions for those substances that under normal conditions may not interact with metal. In addition, the electrochemical potential of the iron molecules it contains provokes the onset of an electrochemical reaction.

It is for this reason that thorough rust removal is recommended. However, for a number of reasons, this procedure cannot be carried out so that not a single molecule of iron hydroxide remains. Therefore, the oxidation reaction and corrosion of the metal do not stop, but only slow down significantly at the first stage. Subsequently, the speed of the process increases exponentially and swelling appears at the site of the previous body repair.

Removing rust from areas of electrochemical corrosion also brings little benefit due to the fact that it does not eliminate the cause - the difference in the electrochemical potential of metal from different batches. Many people know that the “saffron caps” on the lower rear corners of doors are almost invincible.

They appear again and again within a few months after careful cleaning, priming and painting. It's all about the design: this is where the external parts are joined mechanically (by bending the material) to the power ones.

A multilayer metal cake, which, due to operating conditions, is constantly wet, is an ideal place for the onset of electrochemical corrosion.

Since it is very difficult to combat corrosion using mechanical treatment methods, it is better to resort to active cathodic protection.

Essence of the method

The active cathodic protection method is based on the same principle that provokes electrochemical corrosion. Briefly, it is as follows: every metal, like a chemical element, has an electric charge on its surface, formed by the interaction of atoms of its crystalline structure.

Depending on the magnitude of this charge and its potential (from plus to minus), metals are arranged in an electrochemical series. Iron occupies an intermediate position in it. To the left of it are zinc and aluminum. To the right - tin, lead, copper, molybdenum, chromium.

The former are destroyed upon contact with iron in the presence of an electrolyte, while the latter destroy the iron itself.

Homemade rust removal installation

Cathodic protection is an electrolytic method of reducing one metal and destroying another upon mechanical contact. To implement it you will need:

• DC source;
• electrolyte;
• metals with different electrochemical activity towards iron.

First, the rust is cleaned off in the usual way - with sandpaper, a scraper, a brush. After this, take an electrode that is less chemically active than iron. For example, a strip of stainless steel, usually containing chromium or molybdenum. Connect it to the positive terminal of the car battery or charger.

The acid or alkali can be applied to the workpiece or the electrode can be dipped into it. When the electrode approaches the workpiece, seething should begin on the surface of the electrolyte. It occurs due to the release of oxygen during the decomposition of iron hydroxide.

The cleaning time is determined experimentally.

Machined body part without rust

To protect the repair site, a layer of more active metal is applied to it. Connect a zinc electrode to the positive terminal and do the same thing, but in the process you can observe how galvanization forms on the surface of the part being repaired.

Wash off the remaining electrolyte, dry, prime and paint.

If you don’t want to bother with finding a suitable electrolyte and electrodes, then use the Zinkor-Auto electrochemical rust removal kit. It has all the necessary ingredients. One package is enough to treat a square meter of body surface.

Removing rust and applying a protective layer of metal to the surface of the body using an electrochemical method will allow you not to think about corrosion for two to three years.

Source: https://KuzovExpert.ru/kuzovnoy-remont/udaleniye-rzhavchiny-elektrohimicheskim-sposobom.html

7 ways to remove condensation from a toilet tank forever

Condensation on the toilet is the accumulation of moisture in the surrounding atmosphere and its settling on the cold surface of the tank. It forms for various reasons and can cause a huge amount of inconvenience to home owners. In this article we will look at 7 ways to get rid of fogging in the toilet tank.

Why does condensation appear?

Most often, condensation is formed from temperature differences. When there is cold water in the toilet tank, and warm, humid air outside (in the room itself). For moisture to begin to accumulate on the tank, the temperature difference must exceed 11-15 degrees.

The following reasons are also possible:

• increased degree of humidity in the toilet;
• presence of hot pipes in the room;
• drain malfunction;
• pressing the drain too often (then the accumulated water does not have time to reach a warm temperature).

Before fixing the problem, it is important to identify the exact cause.

When to eliminate and when to ignore

You can ignore the problem only in one case. If the tank begins to fog up slightly, but dries quickly. And the presence of condensation on the toilet is almost invisible. If the toilet has time to dry before your next visit to the toilet, you can ignore it. There is no threat to the floor or other surfaces.

A striking example of fogging of the toilet cistern

If there is always fogging on the tank and nothing evaporates on its own, you need to act. And that's why:

• Water that flows onto the floor creates puddles. It's inconvenient and not aesthetically pleasing. I have to constantly wipe the floor.
• This ruins the finish. Moisture destroys many surfaces. Floors and walls quickly lose their attractive appearance.
• The volume of condensate may increase. Then there will be not just puddles on the floor, but a whole lake. There is a risk of flooding your neighbors.
• Water droplets penetrate small cracks and other unprotected areas. Gradually, the water accumulates and stagnates. An unpleasant musty smell appears in the room.
• Condensation increases the level of humidity in the room. Especially in combined bathrooms. When humidity is high, mold and other fungi grow in the house. This spoils the appearance of the bathroom, destroys the walls and causes an unpleasant odor. In addition, mold is dangerous to human health. Frequent headaches, allergies, decreased immunity - all this can appear due to fungi.
• Small cracks will appear on the tank. With time. Continuous exposure to moisture affects any material. By the way, mold can also grow in cracks.
• Wooden elements will begin to rot. Parquet, furniture, decorative items - everything is at risk.
• Rust will appear on metal parts. And there are a lot of them in bathrooms: from water pipes to small items.
• You may have to throw away the mirror. Because with high humidity, black mold often forms behind it. It is impossible to withdraw.

Thus, condensation worsens the indoor microclimate and damages surfaces. The lifespan of the repair will be reduced to approximately four years. Then you'll have to make a new one.

How to get rid

The problem can be resolved in different ways. We offer you 7 proven solutions.

1. Change the microclimate in the bathroom

If poor ventilation is to blame for the increase in humidity levels, then you need to take care of changing the microclimate.

What to do:

• Ventilate the room. If there is a gap between the floor and the doors, air will leak through it.
• If there is no gap, you need to check the ventilation duct. You can use a match/lighter for this. If the draft is weakened, it is necessary to clean the ventilation shaft.
• If cleaning the ventilation shaft does not produce results, you need to install an exhaust ventilation device. If the bathroom is combined, you should choose models with increased protection from moisture.
• Install an air dryer. This is a device that collects water molecules from the atmosphere. The larger the room, the larger the device should be.
• Install an air conditioner. The air conditioner will bring the temperature of the air around the toilet closer to the temperature of the water in the tank. Will reduce moisture content in the air.  

If the bathroom is combined, it is useful to use an exhaust fan while taking a shower. It is turned on a few minutes before water procedures and left for 10-15 minutes after them.

The time you take a shower or bath should be reduced. Afterwards, wipe the glass curtain, bathtub, and walls. Excess moisture harms the microclimate. The water on the walls will evaporate into the surrounding atmosphere and condense on the toilet.

2. Increase the water temperature

The goal is to reduce the difference between the temperature of the water in the tank and the air in the room to reduce the formation of condensation on the tank.

What can be done:

• Insulate the pipeline. This will increase the temperature of the water in the pipes.
• Connect the hot pipeline to the tank. Instead of cold. Important: This may increase your utility bills.
• Install a boiler. Water heating system.
• Make a heat exchanger. For example, using a thermal riser.

You can install a half drain. This will dilute the cold water with warmer water.

3. Modernize the cistern

Modernizing the drain tank will also have a positive effect on the degree of condensation formation. What should be done:

• Insulate it. From the inside. This is done with polystyrene foam, polyethylene foam or isover. The main thing is to remember to turn off the water before starting work. And drain all the liquid from the tank. The slightest dirt is removed from the walls. Brush, sponge, cleaning agent. Remove rust from the inside and bottom.
• Place a second plastic tank inside the tank. The distance between both is 2-3 mm. Rubber gaskets are placed in the gap. Can be silicone.
• Install a new toilet. The new ones are equipped with condensation protection. They have a double tank - made of earthenware and plastic. Such toilets are not cheap, but they are reliable and last a long time. There are also quenching tanks. The cold water line is fed into a separate tank, which heats the water before it is sent.
• This job requires open access to the waterline and sufficient space for the reservoir, among other complications. You will almost certainly have to hire a professional to do the installation.

An example of insulating a toilet cistern with foamed polyethylene

The insulation layer should have a thickness of up to 10 mm. Otherwise, the volume of the tank will decrease.

Insulation inside the tank protects the porcelain surface from cold water. This allows the tank to be in the same temperature range as the rest of the room. Significantly reducing the degree of condensation.

4. Insulate the toilet

Insulating your toilet can reduce the overall humidity level in the room.

This will also improve the microclimate in the bathroom. You can insulate both the floor and the walls. And all together.

5. Make a double wall

Double wall toilet cistern

A double wall inside the tank is one of the most effective solutions.

A plastic reservoir can be placed inside the main tank. Plastic transmits heat better. Therefore, the water will warm up faster and the formation of condensation on the tank will be minimized. As stated above, you can immediately buy a new double-wall toilet. Then the temperature of the water in the tank will always be approximately the same as in the bathroom.

6. Fix the drain

If the tank leaks, the water in it does not have time to warm up to the required temperature. Same with other problems. Breakage of the shut-off valve and seal, wear of the bulb - all this contributes to the fact that the contents of the tank are regularly drained into the sewer. This also provokes the formation of condensation. Up to 1.5-3 liters per day.

Therefore it is necessary:

• repair or replace non-functioning components;
• remove limescale;
• replace the seal.

It is important that the drain does not touch the walls of the tank.

7. Do not drain the water completely

The more water is drained, the more is collected again. The incoming water is cold and does not have time to warm up completely. If you do not drain completely, there will be less new cold water.

To reduce drainage, two ways are suitable:

1. Use a button with a minimum drain function. It is found on many modern toilets.
2. Reduce drain pressure. For example, pressing a button very lightly.
3. Adjust the drain valve so that pressing the button does not cause a complete flush.

There is an alternative option - visit the bathroom less. If you are a man, go to the sink, and the ladies will be patient.

Thus, condensation forms when warm, moist air hits a cold surface. A similar mechanism is observed in drinks with ice, when the walls of the glass fog up due to temperature differences. In the bathroom, a similar effect is eliminated by regulating the temperatures in the tank and in the surrounding atmosphere. The smaller the difference between them, the better.

Useful videos on the topic

Read also:

Source: https://eurosantehnik.ru/proverennye-sposoby-izbavitsya-ot-obrazovaniya-kondensata-na-bachke-unitaza.html

Methods for removing rust from metal surfaces

How to remove rust from metal surfaces - this question is relevant for owners of country houses and apartments. Before performing the final finishing, it is imperative to prepare the surface. There are various ways to remove corrosive plaque. Let's look at the most effective means that will help remove rust from metal at home.

General characteristics of cleaning methods

How to clean rust from metal? The process basically consists of several basic methods. For example, chemistry is the most effective means by which rust is removed. You can buy rust remover liquid in specialized stores. There are also folk mixtures and household products.

You can remove rust from metal using mechanical action. Removal is carried out using special devices: hard metal brushes, grinding machines, special sandpaper. It is also possible to remove rust using a special device - an auto cleaner. The degree of purification is much better than any of the above methods. But such a pleasure is expensive.

The most effective is a combination of several methods, when rust is removed partially using special means, and then through mechanical action. The result is secured by secondary processing with chemical production means.

Remove the layer of oxidized metal with a special cleaning agent. How to clean the rust in this case? The substance is applied to the damaged surface and after some time the layer will have to be washed off. Then secondary processing is carried out.

Experts recommend using in any case a chemical that will not only help remove rust from the metal, but also prevent its further appearance for a long time after the aesthetic finishing. How to get rid of rust at home? Any of the above methods can be used. The main thing is to comply with the work rules. The choice depends on the capabilities of the technical equipment.

Mechanical restoration

Rust can be removed from metal efficiently using mechanical action. First, it is worth assessing the degree of oxidation of the metal and the area over which it has spread. It is important to take into account the type of metal that will be cleaned and the features of further finishing.

How to clean surfaces accordingly and what cleaning objects are used? The main stages of machining are as follows:

1. It is better to start removing corrosion with a rust preventative. The substance should be chosen that is not too aggressive. Retention time is several minutes. This stage is necessary only to soften the oxidized part of the metal.
2. How to further remove rust from the surface? If the metal is strong enough, and the spoilage product has formed in a thick layer, then a small hammer and chisel would be the best option to remove the excess. With the help of these tools, you can beat off dense formations with light movements.
3. Further purification of the metal is carried out by basic mechanical action. If only plaque is observed, then manual cleaning is done with sandpaper. A wire brush is also great for this. You can either make it yourself from leftover wire or buy it at a hardware store.
4. It is more difficult to clean rust from metal with a thick coating of oxidized product. This is where automated devices come to the rescue. It’s better to decide which one you should choose based on the type of metal itself and its strength.
5. How to permanently remove corrosion? All waste residues that settle in the form of dust on the product should be completely wiped off the iron. The oxidizing product must be completely removed, otherwise it will soon return, showing through the paint. You can completely remove the rust using a thick cloth or sandpaper.

For removing rust, the mechanical method is ideal, but it is produced efficiently only if all the above steps are completed. To enhance the impact process, it is recommended to resort to chemical agents.

Source: https://GidPoKraske.ru/spetsialnye-materialy/rzhavlenie/kak-udalit-rzhavchinu.html

How to remove rust from a body using electrolysis

The process of metal rusting can take you by surprise at the most inopportune moment, and if you delay in preventing it, eventually a harmless spot will turn into a through hole. Unfortunately, it is impossible to completely prevent the appearance of rust on a car body.

The most popular method of removing rust to this day is to completely strip the product, prime it and then paint it. But this method has its drawbacks and the most important of them is the short duration of the procedure. As a rule, all of the above manipulations have to be performed regularly at least once every 6 months. Fortunately, this method has been replaced by cleaning the body using electrolysis.

This article will help you understand the process of cleaning a car body from rust using the electrochemical method.

Causes of rust

The more scientific name for the rusting process is corrosion. Metal corrosion is the decomposition of iron due to oxidation caused by exposure of the metal to water and oxygen. Corrosion is classified into:

1. Electrochemical. Most often it is caused by excess environmental humidity.
2. Chemical. Occurs when a metal interacts with any aggressive substance.
3. Biocorrosion. Due to the impact of bacteria and other microorganisms on the metal.

In domestic conditions, metals most often undergo corrosion due to non-compliance with the storage conditions of the product. It is also possible for rust to occur due to an incorrectly selected care product for the car body, for example, the wrong detergent.

Why is it difficult to get rid of corrosion?

When iron interacts with water, a brown powder is formed on the surface of the metal, which, in turn, is a catalyst or accelerator for the metal corrosion process. At the initial stages of rust, it is cleaned off, this is done in order to remove most of the catalyst and stop the process. But it is impossible to completely get rid of the resulting powder, so rust appears again and again.

Note! Despite the instant result, mechanical methods of removing corrosion are less effective, so it is worth paying attention to chemical methods of combating corrosion.

Electrochemical method

The process is the reduction of one chemical element by breaking down another when in contact with each other. In order to carry out electrolysis at home you will need:

• current source;
• electrolyte;
• a metal with electrochemical activity different from iron.

First you need to clean off any corrosion that has already formed. To do this, you need to carry out the manipulations inherent in the mechanical method, i.e. you need to clean the surface using a scraper or any other tool.

Next, you need to connect to the positive terminal of the current source any metal with less chemical activity than iron, for example, a piece of stainless steel. Acid is applied to the surface of the part that needs to be cleaned of rust.

As the electrode approaches the area treated with acid, the active formation of oxygen begins, and therefore the substance located on the surface of the product begins to boil.

If you observe this reaction, then the process of cleaning the metal from corrosion has begun. The duration of this procedure varies depending on the degree of rust and other factors. After time, the surface must be washed and prepared for priming and painting. Thus, it is best to remove corrosion from metals using electrolysis rather than mechanical methods.

Source: https://avtoelektrik-info.ru/sovety/kak-udalit-rzhavchinu-s-kuzova-s-pomoshhyu-elektroliza

How to get rid of rust using a battery: features of the method

Many people often face the problem of removing rust. Therefore, people often wonder how to easily get rid of rust using a battery. This labor-intensive process is carried out as standard.

You can choose two options: painting the problem area or removing it using a certain product. A rusty coating appears due to oxidation of the metal due to exposure to moisture. Therefore, if the rust is not removed in time, the metal structure may completely collapse.

In addition, the battery and other components can be damaged.

Features of the method

How to remove rust

There are various ways to remove rust from a car body. It is not at all necessary to contact a branded car service and pay extra money. Corrosion and chipped paint on the car body, doors or hood can be removed by yourself. Removing rust from the body using a battery will extend the life of the car and improve its appearance.

The sooner a person notices the first signs of rust, the easier it will be to get rid of this “infection.” If rust does appear on the surface of the car, but it has not eaten into the metal, then you can use a mechanical treatment method. Initially, the top surface is thoroughly cleaned. A stiff brush is used for this. The sanding method will remove some dirt.

Note! A special battery guarantees the removal of not only rust, but also carbon deposits, scale, and old paint. Sandblasting stain removal is a process that blasts metal with sand blasts. This procedure is carried out by applying pressure.

Required Tools

How can you remove rust using a battery?

A good way to easily remove rust is a cleaner for cars of any class/make. Any specialized stores have products that will help get rid of stains.

Before applying the product to a metal structure, you need to take a stiff brush and clean the affected area with this item. Once the procedure is completed, a cleaner should be applied to the outer surface. The product should dry within 15 minutes.

After the product has dried, all residues must be removed using a napkin or material. The damaged part of the structure must be thoroughly wiped. If the rust cannot be completely removed, then you should definitely repeat the procedure.

Important! All rust removers on the market are toxic without exception. They are sold in the form of acids, which can accidentally come into contact with the skin and cause burns. To avoid health problems, all safety measures must be followed.

Homemade solution

The results showed that folk experiments help in removing stains. Recipes created at home do the job perfectly. For their base, substances are selected that help dissolve the iron oxide formed on the surface. To prepare a product at home to remove rust, you must use the following components:

• water - 300 ml;
• ammonium - 50 g;
• 40% formalin - 250 g;
• caustic soda - 50g.

All these substances need to be mixed together, diluted with water (1 liter). After receiving the solution, the damaged metal element must be placed in a container. The item must be kept in the solution for 30 minutes. It is recommended to monitor how the process progresses. You need to remove the metal elements after the rust has completely disappeared. All these parts must be washed using hot water and then dried. Damaged items will look like new with a shimmering shine.

Application of acids

To properly clean damaged parts, it is necessary to use strong acids, for example, sulfuric, orthophosphoric and others. The use of pure solutions is not recommended due to their caustic properties.

Making the solution at home does not require any special difficulties. The acid described above is selected, which must be diluted with water. The result should be a 5% solution. Then, the finished product must be added with an inhibitor of 0.5 grams (1 liter of liquid).

Important! To treat a metal surface with this solution, you will have to spend a little time so that the product dries well.

Phosphoric acid product

How to properly remove rust - instructions

It is recommended to use a solution with phosphoric acid, which will instantly remove rust. Before preparing an effective product, many are interested in the question, what concentration should phosphoric acid be in? To search for this acid, you can visit specialized auto chemical stores or industrial departments.

Another effective way to remove stains is based on phosphoric acid. To prepare the product you need to use:

• butanol - 5 ml;
• tartaric acid - 15 ml;
• phosphoric acid - 1 l.

What is the secret of orthophosphoric acid, why does it have such a good effect? In fact, this product converts iron oxide into phosphate, resulting in the formation of a kind of film on the metal surface that thoroughly protects.

Rust removal instructions

Many people often wonder how to remove rust with a battery. The electrical clothespin of the device is connected to the positive terminal of the battery and now we can remove rust, not just remove it, but even galvanize the metal.

A typical source of corrosion on a car's wheel arch. We won’t even clean this rust, we will immediately treat this place with the device. We simply press the moistened cotton wool to the place of corrosion, the rust itself will go away, and the metal that was rusty will be covered with a layer of zinc.

Important! You just need to press and hold for a few minutes. The zinc from the battery body will transfer to the metal on the car body and this place will no longer rust in the future.

You can see how the rust is almost all gone. After galvanizing, there was no trace of rust left, only a small thin layer of zinc appeared. This is clearly visible - it has a silver color.

Neutralization of acid

After the removed plaque has been processed using a manual galvanizer, the effect of the acid must be neutralized. For this we need regular baking soda. Pour the product into a glass and dilute it with water. The result is a composition to neutralize the action of the acid. Then a cotton pad should be moistened in this solution and treated the area that has been galvanized.

Security measures

Compliance with rules and safety measures when performing work

Personal equipment provides protection while performing work. Therefore, before you begin any work with cleaning plaque, you need to get protective clothing and gloves.

All these components should protect the body and hands. To protect your face, experts recommend using a respirator. This device helps protect the respiratory tract.

Reduces the risk of foreign particles, such as chemicals, that can harm your eyes. Safety glasses should be used.

After removing rust from this battery , and before applying paint, you should use a primer, which is carefully applied to the metal surface. After the structure has dried, you can begin processing it.

Important! If you pay timely attention to the design, you can avoid plaque. When the metal surface changes color, you need to start processing it.

Source: https://kliningovyj-raj.ru/uborka/udalenie-rzhavchiny-s-pomoschyu-batareyki/

How to remove fat deposits under the shoulder blades: working on the most inaccessible areas - Place of Power 2.0

Today, a healthy lifestyle is becoming increasingly popular. More and more women want to lose weight, burn fat that accumulates in different parts of the body, and look attractive.

One of the most problematic areas is the back. This is the most difficult area to remove subcutaneous deposits. The worst folds of fat look under the shoulder blades and in the lumbar region.

Every woman who has seen this problem from the outside knows about this. However, it is possible to get rid of them.

Is it possible to remove fat deposits under the shoulder blades and improve your figure, and also how to do this?

Most of the fair sex concentrate on the legs, stomach and sides. Few people think about their back. Indeed, she is not visible. However, on the beach, the folds under the shoulder blades are very noticeable.

First of all, it is worth noting that, unlike the abdomen and sides, fat deposits on the back do not appear immediately. This takes a little time.

On the other hand, they are much more difficult to get rid of. In addition, this area requires less fat mass to form folds.

Why fat deposits accumulate in the shoulder blades and how to get rid of them

The main reason, as a rule, is physical inactivity. In other words, insufficient activity. With this lifestyle, the body burns fewer calories than it takes in, therefore, unused carbohydrates turn into unwanted pounds.

In addition, people often overeat, eat fast food and other unhealthy foods. Hence not only the high calorie content, but also an upset digestive system.

Also, over time, hormonal imbalances may appear. Before you fight back fat deposits, you need to get rid of the causes of their occurrence.

The most effective way to lose weight is exercise. For the following you will need a fitball, a horizontal bar and elastic bands for pull-ups.

Exercise 1

Technique:

1. Take the starting position - lie on your stomach on the fitball , legs straight. Place your toes on the floor. Cross your arms behind your head, as if doing an abdominal exercise. The body is directed slightly downward, the back is straight.
2. Maintaining balance, slowly rise and lower your body. When lowering, inhale; when rising, exhale. If the exercise is too easy, use weights. Barbell plates are suitable for this. They can be pressed to your chest with your arms crossed. Perform 4 sets of 12 reps.

Exercises 2

These are regular pull-ups. Some people find it too difficult to lift their weight, so special bands can be used.

Technique:

• fasten an elastic band or several pieces to the crossbar;
• stretch them, or ask someone for help;
• stand with your knees on the elastic bands;
• perform slow pull-ups;
• try to do 3 sets of 6-8 repetitions.

With proper nutrition and exercise, you can quickly burn back fat.

Source: https://vapeadept.ru/kak-ubrat-zhirovye-otlozheniya-pod-lopatkami-prorabatyvaem-samye-nedostupnye-uchastki/