How much does 3 mm steel sheet weigh?

Weight of galvanized steel sheet 0.5, 0.7 and 1 mm 1m2 - table and how to calculate

According to technical literature, the service life of galvanized sheets ranges from 15 to 20 years. But does all galvanized steel meet this requirement? You have probably already witnessed how not even a year has passed, and rust is already visible on the surface of a sheet. This happens due to the thickness of the protective coating being too thin. So how to recognize such an unscrupulous manufacturer? The weight of the galvanized sheet will help us answer this question.  

Galvanizing

To better understand the situation, let’s first look at what the galvanizing process is. Galvanizing is the application of a galvanic coating to the surface of a metal, the main element of which is zinc. The thickness of zinc depends on the coating class:

• 1st class - 38 microns;
• 2nd class – 22 microns.

The main task of galvanizing is to guarantee protection against corrosion to steel sheets.

It is known that most metals tend to oxidize under normal atmospheric conditions. The oxidation process is destructive for them and leads to a kind of surface abrasion (corrosion).

Some metals (zinc, copper, aluminum) prevent these reactions by forming a dense film of oxides that prevent further penetration of oxygen deeper. Others, which include iron, when interacting with oxygen, form a loose, fragile film, which contributes to the occurrence of oxidation processes. As a result, the sheets begin to become rusty. Applying zinc to the surface of such a metal solves this problem.

Why do you need to know the mass of a leaf?

The following points need to be highlighted here:

• To determine the dimensions of the profile of supports and floors. Based on the weight of the sheets, the load on the load-bearing elements of the metal structure is determined. Neglect of this point leads to premature destruction of the structure;
• The weight of the sheet steel gives an idea of ​​the thickness of the galvanized surface. If the sheet weight exceeds its nominal value, while the total thickness corresponds to the declared value, this indicates that the sheet is galvanized of poor quality. The amount of zinc on the metal surface is underestimated, which will negatively affect its service life.

Methods for determining the weight of galvanization

There are 2 methods for determining the mass of galvanized sheet steel:

• Calculation from tabular data;
• Calculation using formulas.

The tables are more or less clear. They give a reference value for the mass of 1 sq.m. galvanized steel depending on its thickness. You can find them in technical literature.

As an example, let’s calculate the weight of galvanized sheeting of 0.5 mm with an area of ​​2 square meters. meters.

According to the Aviation Scales Handbook:

• Galvanized sheet 0.5 mm - 4.13 kg/m2
• Galvanized sheet 0.7 mm - 5.70 kg/m2
• Galvanized sheet 1.0 mm - 8.05 kg/m2

Multiplying the value we need by the size of our area, we find that the sheets weigh 8.26 kg.

Table

Sheet, mm	Weight 1 m2, kg
0,40	3,34
0,45	3,73
0,50	4,13
0,55	4,52
0,60	4,91
0,65	5,31
0,70	5,70
0,75	6,09
0,80	6,48
0,90	7,27
1,00	8,05
1,10	8,83
1,20	9,62
1,50	11,97
2,00	15,90
2,50	19,82

The second method is somewhat more complicated. The basic formula for calculating the weight of galvanizing looks like this:

Total sheet weight=steel weight + galvanized part weight

The weight of steel is found from the following ratio:

steel weight=sheet length*sheet width*steel thickness*steel density

Density for steel alloys is a reference value and is 7850 kg/m3.

As for the thickness of the steel, it depends on the class by which the sheet is galvanized (the value of the thickness of zinc is indicated above):

Steel thickness = total sheet thickness – zinc thickness

The weight of the galvanized layer is determined in a similar way. When calculating, it is necessary to pay attention to compliance with the dimensions of the quantities.

Source: https://prompriem.ru/stati/ves-ocinkovannogo-lista.html

Weight of sheets, rolled steel sheets GOST 16523-89, GOST 14637-89

All rolled products, depending on their shape, can be divided into four main groups:

a) grade steel;

b) sheet steel;

c) pipes;

d) special types of rental.

Rolled sheets of steel and non-ferrous metals are used in various industries and construction. In this regard, sheet steel, for example, is divided into automotive, transformer, roofing tin, etc. The production of sheet steel with tin, zinc, aluminum and plastic coatings, polymer coating, as well as flat, smooth and profiled: corrugated sheets, expanded metal, perforated.

Sheet steel is divided into groups depending on the thickness of the section. Sheets more than 4 mm are classified as thick sheet steel, and sheets less than 4 mm are classified as thin sheet metal. In this case, there are the following types of sheet steel: shipbuilding, boiler, electrical, tin, acid- and heat-resistant, armor, etc.

The qualitative characteristics of flat products are determined by mechanical properties, chemical composition, molecular structure, use for further processing and, finally, smelting method. When producing rolled sheets, the thickness may have plus or minus tolerances, which entails changes in the actual weight of a square meter of sheet.

The larger the dimensional tolerance for a given flat product (the difference between the maximum and minimum dimensions of the flat product), the greater will be the difference between the theoretical weight of the sheet steel and the actual weight.

Hot rolled sheet of ordinary quality is made from thin sheet steel (thickness 0.5 mm - 3.9 mm) GOST 16523-89 and thick sheet steel (thickness 4 mm - 160 mm) GOST 14637-89. Flat sheet metal is widely used by the company "Skhid-budkonstruktsiya" in the production of steel containers.

The assortment of steel sheet corresponds to GOST 19903-74, the chemical composition of steel corresponds to GOST 380-88. The assortment for cold-rolled sheet steel provides for the supply of sheets with a width of 600–1400 mm and a thickness of 0.2–3.9 mm. Sheet length 1200-3500 mm. Assortment standards for cold-rolled steel coils provide for the supply of strips with a width of 200-2300 mm and a thickness of 0.2-4 mm.

The current standards stipulate specific gravity, tolerances for sheet thickness and thickness variations, depending on the dimensions of the sheet or tape and delivery conditions. The standard includes standards for tensile strength and elongation. The permissible warpage per 1 linear line is also specified. m along the length and width of the sheet and control for decarbonization.

In some cases, the technical conditions stipulate tighter tolerances than in the standards.

Cold-rolled and hot-rolled sheets

Cold-rolled sheet with a thickness of 1 mm, 1.2 mm, 1.5 mm, 2 mm, 3 mm, available from steel grades 08KP, 3SP/PS. 

Hot rolled sheet thickness 2mm, 2.5mm, 3mm, sheet 4, 5, 6mm, 8-10mm, 12mm, 14-16mm, 18mm, 20-32mm, 35mm, 36mm, 40 mm, 45 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 103 mm, available in grade st 3SP/PS, steel 09G2S-12; thickness from 4 mm to 50 mm steel grade 45.  

Galvanized sheet thickness 0.5 mm, 0.55 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm - galvanized iron + polymer coating.

Cold rolling has two great advantages over hot rolling: firstly, it allows the production of sheets and strips with a thickness of less than 0.8-1 mm, down to several microns, which is unattainable by hot rolling; secondly, it ensures products of higher quality in all respects - dimensional accuracy, surface finish, physical and mechanical properties. These advantages of cold rolling have led to its widespread use in both ferrous and non-ferrous metallurgy.

In the production of hot-rolled steel sheet, the metal is first heated and then deformed using special rolling mills by rolling. Cold rolling ensures uniform sheet thickness and also improves its properties by hardening the surface.

Hardening is formed as a result of changes in the structure of the steel sheet . sheet, metal grains are stretched and oriented along the direction of plastic flow of the metal with axes of greatest strength. A metal sheet acquires different properties along and across, i.e.

along the length and width of the steel strip . At large degrees of plastic deformation, all metal grains are almost identically oriented in the structure of rolled steel sheets . Plastic deformation during rolling of a steel sheet causes hardening of the metal - cold hardening or cold hardening.

In this regard, to restore plastic properties it is necessary to carry out annealing.

Hot-rolled and cold-rolled sheets are used in mechanical engineering, metal structures, construction, mining and other industries. The actual scope of application determines the requirements for sheet metal. For the manufacture of products by stamping, sheet metal is used: cold-rolled, hot-rolled, cold-rolled coil, galvanized steel in coils, strip metal.  

This table is used when calculating the mass of rolled sheets based on the specific gravity of a square meter of sheet metal.

Sheet Metal Weight Table

Rolled sheet metal according to GOST

thickness, mm	weight, kg/m2	thickness, mm	weight, kg/m2	thickness, mm	weight, kg/m2	thickness, mm	weight, kg/m2
0,5	3,925	1,4	10,99	6	47,1	18	141,3
0,55	4,32	1,5	11,77	7	54,95	20	157
0,6	4,71	1,8	14,13	8	62,8	22	172,7
0,7	5,5	2	15,7	9	70,65	25	196,25
0,8	6,28	2,5	19,62	10	78,5	30	235,5
0,9	7,06	3	23,55	12	94,2	40	314
1	7,85	4	31,4	14	109,9	50	392,5
1,2	9,42	5	39,25	16	125,6	60	471

 Calculation of how much 1m2 of steel sheet weighs using the formula

How to calculate the weight of sheet metal by area?

Using a simple calculator you can easily calculate the weight of a steel sheet without having a table of thickness and weight of 1m2.

The weight of a sheet of metal is calculated using a regular calculator using the formula:

P = H*B*L* 7.85
where

P- theoretical weight, kg

L is the length of the metal sheet in linear meters, m;

H—sheet thickness, mm;

B—width of rolled sheets, m;

7.85 kg/dm3 - density of black steel, specific gravity - corresponds to the weight of a square meter of steel 1 mm thick.

The weight of sheet metal is calculated in kilograms (kg), if the dimensions of the sheet thickness are substituted into the formula for calculating the weight of a sheet of metal in millimeters (mm), and the length and width of the sheet in meters (m). Knowing the weight of a steel sheet, you can easily calculate how many sheets are in a ton or pack of a certain mass.

The weight of galvanized sheet will differ slightly from black, because... The thickness of the zinc coating is several micrometers.

To quickly calculate the weight of rolled sheets, use the “Metal Calculator” in the “Metal Assortment” section of the website. The sheet weight calculator calculates the weight for different grades of steel, which is important if you need to calculate the weight of a stainless steel sheet or made of non-ferrous metal. The sheet metal calculator calculates the weight based on the dimensions of the workpiece and thickness in mm, and the dimensions of the steel sheet (based on the total weight of the package and the thickness of the rolled sheet).

The assortment of sheet steel is needed primarily by suppliers for metal purchases to calculate the weight of rolled metal. If in the process of work the question often arises about how to find out the weight of sheet metal, but there is no assortment of rolled metal at hand, the best way to solve this problem is to calculate the weight of the sheet using the above formula on a calculator.

Source: https://sbk.ltd.ua/ru/sortament-ves-metalloprokata/133-ves-lista-stalnogo-listovogo-prokata-gost-16523-89-gost14637-89.html

Steel sheet assortment

Sheet steel is a type of rolled metal produced by hot rolling in rolling mills. It can be used as an independent metal product and as a rolling stock for cold-rolled sheets, production of bent profiles, and pipes. In its production, carbon unalloyed and alloyed steel grades are used.

Range of hot rolled steel sheets

The range of hot-rolled sheet products is regulated by GOST 19903-2015. In accordance with the standard, rolled products are produced in sheets (thickness 0.4-160 mm) or rolls (thickness up to 25 mm). The width of sheets is 500-4400 mm, rolls are 500-2200 mm. Manufacturing accuracy in thickness - increased and normal. Flatness – especially high, high, increased, normal.

This is the most common and popular type of rolled steel in the national economy. It is used in construction, shipbuilding, bridge construction, automobile and aircraft construction, and in the production of locomotive frames.

Table of sheet assortment and weight of hot-rolled steel in accordance with GOST 19903-2015

Sheet thickness, mm	Sheet dimensions, m x m	Weight 1 m2, kg	Sheet weight, kg
1,5	1.25x2.5	11,78	36,8
2,0	1.25x2.5	15,7	49,06
3,0	1.25x2.5	23,55	73,59
4,0	1.5x6	31,4	282,6
5,0	1.5x3	39,25	176,62
5,0	1.5x6	39,25	353,25
6,0	1.5x6	47,1	423,9
8,0	1.5x6	62,8	565,2
10,0	1.5x6	78,5	706,5
12,0	1.5x6	94,2	847,8
14,0	1.5x6	109,9	989,1
14,0	2x6	109,9	1318,8
16,0	1.5x6	125,6	1130,4
16,0	2x6	125,6	1507,2
18,0	2x6	141,3	1271,7
20,0	2x6	157,0	1884,0
22,0	2x6	172,7	2072,4
25,0	2x6	196,25	2652,0
30,0	2x6	235,5	2826,0
32,0	2x6	251,2	3014,4
36,0	2x6	282,6	3391,2
40,0	2x6	314,0	3768,0
50,0	2x6	392,5	4710,0

Range of cold rolled steel sheets

The production of these metal products is regulated by GOSTs 19904-90, 9045-93, 16523-97. Thickness – up to 5.0 mm. Width – 500-2350 mm. Manufacturing accuracy in thickness - high, increased, normal. Flatness – especially high, high, improved, normal.

General-purpose products are made from high-quality carbon steels, and for certain applications - from low-alloy or alloy steels. Such products are characterized by high dimensional accuracy and surface quality, as well as a hardened top layer.

To eliminate work hardening and obtain a fine-grained structure in the surface layer, recrystallization annealing is used.

Cold-rolled sheets are used in the production of profiled sheets, in the automotive industry, in the manufacture of dishes coated with enamel, and containers for canned food products.

Table of dimensions and weight of cold rolled steel sheets

Sheet thickness, mm	Sheet dimensions, m x m	Weight 1 m2, kg	Sheet weight, kg
0,7	1.25x2.5	5,5	17,17
0,8	1.25x2.5	6,28	19,63
1,0	1.25x2.5	7,85	24,53
1,2	1.25x2.5	9,42	29,44
1,5	1.25x2.5	11,78	36,8
2,0	1.25x2.5	15,7	49,06
2,5	1.25x2.5	19,63	61,33
3,0	1.25x2.5	23,55	73,59

Main characteristics of galvanized sheet

Galvanized sheets are produced by applying a zinc layer to cold-rolled coils or sheets, which protects the base metal from corrosive destruction. The most common methods of galvanizing in industrial conditions are hot and electrolytic. The main application of such a sheet is the production of corrugated sheets. It is also used for the manufacture of technological equipment, household appliances, and in the furniture industry.

Sheet thickness, mm	Weight 1 m2, kg	Sheet thickness, mm	Weight 1 m2, kg
0,45	3,73	1,2	9,62
0,5	4,13	1,5	11,98
0,55	4,52	2,0	15,9
0,7	5,7	2,5	19,83
0,8	6,48	3,0	23,75
1,0	8,05

Galvanized corrugated sheeting: characteristics and areas of application

Profiled sheet is a metal product obtained by profiling cold-rolled galvanized sheets with a thickness of 0.4-1.0 mm on special bending mills. Various grades of this material are used for wall coverings, fencing, and roofing.

Table of sizes and weights of profiled sheets of various brands

Brand	Thickness, mm	Width, mm	Weight of 1 linear meter, kg
C8	0,5	1150	5,4
C8	0,55	1150	5,9
C8	0,6	1150	6,3
C8	0,7	1150	7,4
S21	0,55	1000	5,4
S21	0,7	1000	5,9
S21	0,8	1000	6,3
S21	0,9	1000	7,4
NS35	0,5	1000	5,4
NS35	0,55	1000	5,9
NS35	0,7	1000	6,3
NS35	0,8	1000	7,4
H57	0,6	750	5,6
H57	0,7	750	6,5
H57	0,8	750	7,49
H75	0,6	750	6,3
H75	0,7	750	7,4
H75	0,8	750	8,4
H75	0,9	750	9,3
H75	1,0	750	10,3
H114	0,7	600	7,35
H114	0,8	600	8,4
H114	0,9	600	9,3
H114	1,0	600	10,3
H114	0,8	750	10,5
H114	0,9	750	11,62
H114	1,0	750	12,88

Metal profiled sheet with polymer coating: range and main characteristics

To increase the corrosion resistance and decorative characteristics of galvanized corrugated sheeting, it is coated on one or both sides with a colored polymer layer. Depending on the brand, these products are used for façade cladding, fencing, and as roofing material. Thanks to the wide range of colors, corrugated sheeting can be selected in accordance with the overall color scheme of the building or the surrounding landscape.

Table of dimensions and weight of polymer-coated corrugated sheets

Brand	Thickness, mm	Width, mm	Weight of 1 linear meter, kg
C8	0,5	1150	5,4
C8	0,6	1150	6,3
C8	0,7	1150	7,4
S21	0,5	1000	4,9
S21	0,7	1000	5,9
S21	0,8	1000	6,3
C44	0,7	1000	6,3
C44	0,8	1000	7,4
NS35	0,5	1000	5,4
NS35	0,7	1000	6,3
NS35	0,8	1000	7,4
NS 44	0,7	1000	6,3
NS44	0,8	1000	7,4
H57	0,7	750	6,5
H57	0,8	750	7,49
H60	0,7	845	7,4
H60	0,8	845	8,4

Corrugated sheet: types and characteristics

Corrugated steel sheet is a popular building material that has a smooth surface on one side and a corrugated surface on the other. The thickness of the main sheet is 2.5-12.0 mm. Produced in accordance with GOST 8568. Products are sold in sheets or rolls. Width – 600-2200 mm. The height of the protrusions is up to 30% of the thickness of the main sheet, but not less than 0.5 mm.

Due to its anti-slip characteristics, corrugated steel sheet is used in the manufacture of steps of stairs, ramps, passages, floors of elevators, cars, and change houses.

Thickness of the main sheet, mm, type of corrugation	Sheet size, m x m	Weight 1 m2, kg	Sheet weight, kg
3, "lentils"	1.5x6	24,2	217,8
4, "diamond"	1.5x6	33,5	301,5
4, "lentils"	1.5x6	32,2	289,8
5, "diamond"	1.5x6	41,8	376,2
5, "lentils"	1.5x6	40,5	364,5
6, "diamond"	1.5x6	50,1	450,9
6, "lentils"	1.5x6	48,5	436,5
8, "lentils"	1.5x6	64,9	584,1

Expanded metal sheet: characteristics and applications

Lightweight metal sheet with cells is made from rolled hot-rolled or cold-rolled steel in accordance with GOST 8706. Perforations can have different shapes. The cells are arranged in a checkerboard pattern at the same distance from each other. Expanded metal sheet (PVL) is used in the construction of fences, for the manufacture of bridges, passages, enclosures, sieves, and gratings for equipment.

Table of dimensions and weight of PVL

Brand PVL	Sheet size, m x m	Weight 1 m2, kg	Sheet weight, kg
406	1x3	15,7	47,1
506	1x3	16,4	49,2
508	1x2.4	20,9	50,16
508	1x2.6	20,9	54,34
508	1.2x2.55	20,9	63,95
510	1.2x2.07	24,7	61,35

Source: https://TreydMetall.ru/info/sortament-stalnogo-lista

What determines the weight of a steel sheet and how to determine it

Nowadays, steel is in special demand as a durable and reliable building material. It is used in the form of blanks for mechanical engineering, construction work and other industries. The use of steel sheets is also popular. The latter differ in area, thickness, rolling strength, rolling method, edge character and flatness. The scope of application of the material and its mass, and, accordingly, the price, depend on these parameters.

Characteristics of steel

To determine the mass of a steel sheet, you can use special online calculators, which are presented on many websites. If you don’t have them at hand, a table will come to the rescue.

The thickness of the steel can be:

1. Thin - thickness does not exceed 3.99 mm. This is usually a cold-rolled metal.
2. Thick - thickness reaches 160 mm. These most often include hot-rolled steel.

By the nature of the edge:

1. With cut edge;
2. With uncut edge.

By flatness:

1. Particularly high flatness or PO;
2. High flatness or PV;
3. Improved flatness or PU;
4. Normal flatness or PN.

By rolling strength:

1. A - increased accuracy;
2. B - normal accuracy.

By production method:

1. Cold rolled;
2. Hot rolled - hot metal is rolled out using a special press to the desired thickness.

Additionally, galvanized and corrugated (rhombic and lentil) options are available. Depending on the selected parameters, the weight of the steel will also fluctuate.

General formula

To find the mass, the general formula is usually used:

Weight = surface area (length x width) x weight per kilogram per 1 square meter. meter,

where the weight is determined from the table, based on the thickness and rolling method. The length and width should be converted to meters.

If you don’t have a table at hand, you can use the following formula. It is suitable for determining the weight of sheets obtained by hot-rolled and cold-rolled methods.

Weight = length x width x thickness x 7.85,

where 7.85 kg/dm3 is the density of steel 1 mm thick. Length and width should be in meters, thickness - in millimeters.

Cold rolled steel

Depending on the parameters, the weight of the steel sheet can vary from 5.5 kg to 47 kg, with the weight of steel per square meter from 2.75 kg to 23.5 kg. The table below will indicate the weight for a steel sheet 1 meter wide and 2 meters long.

Material parameters range from 0.35 mm to 1 mm, pitch - 0.05 mm

Material parameters range from 1.2 mm to 2 mm, pitch - 0.1 mm

Material parameters range from 2.2 mm to 3.5 mm

Hot rolled steel

When hot rolled, the thickness of the steel sheet ranges from 1.5 mm to 160 mm. The weight ranges from 12 kg to 1256 kg.

Material parameters range from 1.5 mm to 3.5 mm, pitch - 0.5 mm

Material parameters range from 4 mm to 10 mm, pitch - 1 mm

Material parameters range from 10 mm to 40 mm

Material parameters range from 45 mm to 160 mm

Other classes of steel sheets

When calculating the weight of steel, it is important to consider the differences between hot-rolled and cold-rolled steel, zinc-coated sheets and corrugated versions. Due to the peculiarities of their creation, their weight and parameters differ significantly. For example, the thickness of galvanized metal consists of the metal itself and the coating on top and bottom. In the table they are already included in the specified parameters.

The parameters of galvanized material range from 0.35 mm to 1 mm

Galvanized material

Material with diamond and lentil corrugation size 1.25*2.5 m

Material with diamond and lentil corrugation size 1.5*6 m

Source: https://stanok.guru/stal/kak-opredelit-ves-stalnogo-lista.html

Buy Steel sheet, hot rolled 5 mm Steel: steel 20 Samara (application No. 126998 from 01/21/2020 11:49)

Supplier prices Tenders Buyer requests ads Print application Name Quantity Length Steel Price (no more) Note 1 Steel sheet, hot rolled 5 mm 2.03 tons — v.20 — — 2 Steel corner 75x75x5 0.15 tons — v.20 — — Comment on the application: Please make a commercial offer. Rolled sheet 5 mm st. 20 tn 2.029 Angle 75x75x5 st. 20 tn 0.15 Delivery required Delivery address: Novokuibyshevsk Customer To authorize yourself as a rolled metal supplier, we suggest you post your price list on our portal. After posting the price list, you will have full access to Buyers' Applications. You will receive direct calls from customers to your office and transitions to your website from the pages of the METAL100.RU portal The buyer’s transition to your website is highly converting, since the visitor has already chosen the size of rolled metal he needs, found out your price and went to your website to make a purchase. Example of placing a price list of suppliers - Steel sheet, hot rolled RATING METAL100.RU - http://top.mail.ru/Rating/Industry-Ferrous/Month/Visitors/ If you are ready to log in, please send us an email to [email protected] containing the following information: — your website address (if available); — link address for downloading the current price list in Excel format. (if there is a link, prices are updated automatically twice a day), if the link or this format is not on the site, send your price list in Excel format. to [email protected] . (updating prices at your request); — Your details for invoicing. More details - Services section: http://metal100.ru/service/ More information about placement in the Advertising section: http://metal100.ru/advertising/

Source: http://metal100.ru/orders/126998

Rolled sheet weight table

Constant improvement of the construction industry brings various new products into our everyday life, with the help of which modern builders have the opportunity to build new structures. Such innovations make it possible to invent more universal elements that find their application in mechanical engineering, the production of specific equipment and in other areas of human activity.

One of these elements is steel sheets, which act as an indispensable part in the construction of various building structures and are used in the development of modern cars and various equipment.

Steel sheets advantageously combine strength, reliability, durability and availability, which makes them very popular design elements among domestic and foreign manufacturing companies.

In more detail, the advantages of steel sheet allow it to be used for:

• construction of welded structures;
• creating hulls for cars or watercraft;
• production of equipment resistant to chemicals and elevated temperatures;
• production of agricultural and industrial machinery.

By the way, the weight of such a sheet is as acceptable as possible, which makes it available for delivery to any facility - customers can place an order for a large batch of steel sheet that will fit even in a not very spacious car.

Due to the specifics of the sheet, including weight, each individual element fits comfortably on top of the other, which ensures the most compact packaging, which has a positive effect on maintaining the integrity of the sheets during transportation.

Variety of steel sheet

In practice, with the use of modern equipment and a team of experienced professionals, steel products can be manufactured in a wide variety of designs, which allows company clients to implement almost any design solution! Consumers are offered products in the following versions:

• with a corrugated surface (used in the installation of production sites, for the production of high-quality comfortable stairs and other structures where it is necessary to minimize the possibility of sliding on the surface);
• with a corrugated surface (such sheets are mounted as a roofing surface; there is additional treatment with zinc or polyester to increase the original technical characteristics, including reducing the weight of such sheets);
• with a perforated surface (the structural element is produced for the purpose of using it to create unique designer interiors);
• with a cut surface (coated with polymer materials and used for technical purposes);
• stamped sheet (designed for processing external walls of buildings).

As you can see, multifunctional steel sheets can be used for a variety of purposes, the specifics of which are significantly different. Customers only need to indicate their requirements to manufacturers, who are ready to produce high-quality steel elements with specific features.

Weight of steel sheets

Do not forget that the less mass a component has, the easier and more profitable it is to use it to implement your projects. The weight of the steel sheet makes it stand out among other similar products. Detailed data on the mass of products (sheet weight and thickness) can be found in the table below:

Rolled sheet metal according to GOST
thickness of steel sheet, mm	sheet weight, kg/m2	thickness, mm	sheet weight, kg/m2	thickness, mm	sheet weight, kg/m2	thickness, mm	sheet weight, kg/m2
0,5	3,925	1,4	10,99	6	47,1	18	141,3
0,55	4,32	1,5	11,77	7	54,95	20	157
0,6	4,71	1,8	14,13	8	62,8	22	172,7
0,7	5,5	2	15,7	9	70,65	25	196,25
0,8	6,28	2,5	19,62	10	78,5	30	235,5
0,9	7,06	3	23,55	12	94,2	40	314
1	7,85	4	31,4	14	109,9	50	392,5
1,2	9,42	5	39,25	16	125,6	60	471

Of course, for a more detailed calculation of the quantity of required products and the dimensions of each individual unit, including the weight of the steel sheet, the process will require the involvement of qualified construction specialists who can analyze the specifics of the project and advise customers how much material is required to implement the plan, taking into account the weight of the sheet.

Competent assistance from our company employees

The Moskomplekt company specializes in construction and renovation work, so from us you can always get professional assistance in implementing the most daring decisions for the construction of original buildings and the creation of exclusive products.

Competent craftsmen are ready to complete work of any complexity in the shortest possible time or provide you with any quantity of high-quality sheet, the weight of which will allow it to be easily transported throughout the country, so you don’t have to worry about the reliability and speed of completing the task - taking care of the interests of clients is our priority.

Prices for rolled steel elements, depending on the specifics of the sheet, including weight, are presented in this table:

Hot rolled steel sheet

Sheet thickness	Sheet sizes	Unit	Cost in rubles
1.5 mm	1.5*1250*2500	PC.	2011
2 mm	2*1250x*2500	PC.	2441
2.5 mm	2.5*1250*2500	PC.	3038
3 mm	3*1250*2500	PC.	3625
4 mm	4*1500*3000	PC.	6700
4 mm	4*1500*6000	PC.	12943
5 mm	5*1500*3000	PC.	8196
5 mm	5*1500*6000	PC.	16420
6 mm	6*1500*3000	PC.	10228
6 mm	6*1500*6000	PC.	20048
8 mm	8*1500*6000	PC.	26005
10 mm	10*1500*6000	PC.	32460
12 mm	12*1500*6000	PC.	40416

Hot rolled steel sheet

Sheet thickness	Sheet sizes	Unit	Cost in rubles
1.5 mm	1.5*1250*2500	m2	643
2 mm	2*1250x*2500	m2	780
2.5 mm	2.5*1250*2500	m2	970
3 mm	3*1250*2500	m2	1160
4 mm	4*1500*3000	m2	1500
4 mm	4*1500*6000	m2	1430
5 mm	5*1500*3000	m2	1820
5 mm	5*1500*6000	m2	1830
6 mm	6*1500*3000	m2	2270
6 mm	6*1500*6000	m2	2230
8 mm	8*1500*6000	m2	2900
10 mm	10*1500*6000	m2	3600
12 mm	12*1500*6000	m2	4500

You can obtain all other information on the weight of the sheets and other features of the products during a telephone consultation with the managers of our organization.

Source: http://ooo-asteko.ru/ves-listovogo-prokata-tablitsa/

Calculation of sheet steel weight

All rolled products, depending on their shape, can be divided into four main groups:

a) grade steel;

b) sheet steel;

c) pipes;

d) special types of rental.

Rolled sheets of steel and non-ferrous metals are used in various industries and construction. In this regard, sheet steel, for example, is divided into automotive, transformer, roofing sheet, etc.

The production of sheet steel with tin, zinc, aluminum and plastic coatings, polymer coating, as well as flat, smooth and profiled: corrugated sheets, expanded metal, perforated, is expanding.

Sheet steel is divided into groups depending on the thickness of the section. Sheets more than 4 mm are classified as thick sheet steel, and sheets less than 4 mm are classified as thin sheet metal. In this case, there are the following types of sheet steel: shipbuilding, boiler, electrical, tin, acid- and heat-resistant, armor, etc.

The qualitative characteristics of flat products are determined by mechanical properties, chemical composition, molecular structure, use for further processing and, finally, smelting method. When producing rolled sheets, the thickness may have plus or minus tolerances, which entails changes in the actual weight of a square meter of sheet.

The larger the dimensional tolerance for a given flat product (the difference between the maximum and minimum dimensions of the flat product), the greater will be the difference between the theoretical weight of the sheet steel and the actual weight.

Hot rolled sheet of ordinary quality is made from thin sheet steel (thickness 0.5 mm - 3.9 mm) GOST 16523-89 and thick sheet steel (thickness 4 mm - 160 mm) GOST 14637-89. Flat sheet metal is widely used by the company "Skhid-budkonstruktsiya" in the production of steel containers.

The assortment of steel sheet corresponds to GOST 19903-74, the chemical composition of steel corresponds to GOST 380-88. The assortment for cold-rolled sheet steel provides for the supply of sheets with a width of 600–1400 mm and a thickness of 0.2–3.9 mm. Sheet length 1200-3500 mm. Assortment standards for cold-rolled steel coils provide for the supply of strips with a width of 200-2300 mm and a thickness of 0.2-4 mm.

The current standards stipulate specific gravity, tolerances for sheet thickness and thickness variations, depending on the dimensions of the sheet or tape and delivery conditions. The standard includes standards for tensile strength and elongation. The permissible warpage per 1 linear line is also specified. m along the length and width of the sheet and control for decarbonization.

In some cases, the technical conditions stipulate tighter tolerances than in the standards.

Rolled sheets are divided into cold-rolled and hot-rolled

Cold-rolled sheet with a thickness of 1 mm, 1.2 mm, 1.5 mm, 2 mm, 3 mm, available from steel grades 08KP, 3SP/PS. 

Hot rolled sheet thickness 2mm, 2.5mm, 3mm, sheet 4, 5, 6mm, 8-10mm, 12mm, 14-16mm, 18mm, 20-32mm, 35mm, 36mm, 40 mm, 45 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 103 mm, available in grade st 3SP/PS, steel 09G2S-12; thickness from 4 mm to 50 mm steel grade 45.  

Galvanized sheet thickness 0.5 mm, 0.55 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1 mm - galvanized iron + polymer coating.

Cold rolling has two great advantages over hot rolling: firstly, it allows the production of sheets and strips with a thickness of less than 0.8-1 mm, down to several microns, which is unattainable by hot rolling; secondly, it ensures products of higher quality in all respects - dimensional accuracy, surface finish, physical and mechanical properties. These advantages of cold rolling have led to its widespread use in both ferrous and non-ferrous metallurgy.

In the production of hot-rolled steel sheet, the metal is first heated and then deformed using special rolling mills by rolling. Cold rolling ensures uniform sheet thickness and also improves its properties by hardening the surface.

Hardening is formed as a result of changes in the structure of the steel sheet . sheet, metal grains are stretched and oriented along the direction of plastic flow of the metal with axes of greatest strength. A metal sheet acquires different properties along and across, i.e.

along the length and width of the steel strip . At large degrees of plastic deformation, all metal grains are almost identically oriented in the structure of rolled steel sheets . Plastic deformation during rolling of a steel sheet causes hardening of the metal - cold hardening or cold hardening.

In this regard, to restore plastic properties it is necessary to carry out annealing.

Hot-rolled and cold-rolled sheets are used in mechanical engineering, metal structures, construction, mining and other industries. The actual scope of application determines the requirements for sheet metal. For the manufacture of products by stamping, sheet metal is used: cold-rolled, hot-rolled, cold-rolled coil, galvanized steel in coils, strip metal.  

This table is used when calculating the mass of rolled sheets based on the specific gravity of a square meter of sheet metal.

How much does a 3mm sheet of metal weigh?

· 09.09.2019

Cold rolled sheet GOST steel 08ps/kp

Weight of one meter square m2 (kg)

Hot rolled sheet GOST steel st3sp/ps5

Weight of one meter square m2 (kg)

Hot rolled sheet 1.5

Hot rolled sheet 2.0

Hot rolled sheet 2.5

Hot rolled sheet 3.0

Hot rolled sheet 4.0

Hot rolled sheet 5.0

Hot rolled sheet 6.0

Hot rolled sheet 8.0

Hot rolled sheet 10.0

Hot rolled sheet 12.0

Hot rolled sheet 14.0

Hot rolled sheet 16.0

Hot rolled sheet 18.0

Hot rolled sheet 20.0

Sheet metal weight

Galvanized sheet GOST steel 08ps/kp

Weight of one meter square m2 (kg)

Lentil corrugated sheet metal weight

Lentil corrugated sheet GOST steel st3sp/ps5

Weight of one meter square m2 (kg)

Lentil leaf 3.0

Lentil leaf 4.0

Lentil leaf 5.0

Lentil leaf 6.0

Lentil leaf 0.8

Lentil leaf 10

Lentil leaf 12

Rhombus corrugated sheet metal weight

Corrugated rhombic sheet GOST steel st3sp/ps5

Weight of sheets of steel and other metals

The theoretical mass of a linear meter of rolled steel sheets and coils is calculated based on reference information according to GOST or using the simple geometric formula ρу = ρ · a · s, (kg/m), where ρ is the steel density 7850 kg/m3; s—steel thickness in mm; a is the sheet width in mm.

Weight of steel sheet / Assortment of rolled metal “Ruler”

Sheet steel range

Steel sheets differ in the manufacturing method: cold-rolled and hot-rolled.

In this section we will look at the weight of hot-rolled steel sheet

Weight per square meter of steel sheet (GOST 19903-74 and 19904-90)

Thickness of steel sheet S, mm

Weight of 1m2 steel sheet, kg

The weight of a steel sheet depends on the thickness of the sheet and the size of the sheet, for example, we have a steel sheet measuring 1.2 m by 3 meters in length and 3 mm thick, we calculate 1.2 X 3 = 3.6 square meters, and the weight of a square meter of sheet steel according to our weight table is 23.55 kg/sq.m. We get the weight of the steel sheet (3.6 sq. m. X 23.55 kg/sq. m.) equal to 84.78 kilograms.

Source: https://vi-pole.ru/skolko-vesit-list-metalla-3mm.html

Encyclopedia for steel sheet

In order to buy steel sheets from METAL BUREAU always at the lowest prices, you need to go to the main menu and in Ferrous Metal click on the Steel sheets link.

You can specify your request by selecting GOST, thickness, width and steel grade of the position you need in the filter. To confirm the availability of goods of the required volume, send the details and application to our specialists.

Within 15 minutes you will receive an invoice to pay for sheet metal at the lowest prices. The next day, the rolled metal will be at your place at a pre-agreed time!

For quick access, use the links:

What is flat metal sheet

A flat metal sheet is a rolled sheet product with a cut or uncut edge.

How to calculate the weight and price of steel sheet

Metal sheet sizes:

• t—thickness of the metal sheet
• a is the width of the metal sheet
• b is the length of the metal sheet

1. Calculation of the theoretical weight of 1 steel sheet:
   Weight of 1 sheet (t) = t (mm) x h (mm) x a (mm) x 7.85 (kg/m3)
2. Calculation of the cost of 1 steel sheet:
   Price of 1 sheet (RUB) = Weight of 1 sheet (kg) x Price per 1 ton (RUB): 1000 (kg)
3. Calculation of the weight of 1 m2 of steel sheet:
   Weight of 1 m2 = Weight of 1 sheet: Area of ​​1 sheet (a x b)
4. Calculation of the price of 1 m2 of steel sheet:
   Price of 1 m2 = Price of 1 sheet: Area of ​​1 sheet (a x b)

See the minimum prices per ton of rolled sheet metal at metal depots in Moscow and Moscow Region here: metal sheet prices.

Types and technical characteristics of rolled sheets

1. Flat steel sheets in sheets:

2. Sheet metal in rolls:

• GOST 19904-90 cold rolled coil
• GOST 14918-80 galvanized roll

3. Steel sheet with polymer coating (RAL).

For the production of steel sheets, depending on the rolling method in production, the following steel grades are used:

• Hot rolled steel sheets (GOST 19903-90):
• ordinary quality steel: 3 sp/ps, 2 ps
• low alloy steel: 09G2S, 17G1S
• structural steel: 10, 20, 35, 40Х, 45, 65Г
• Cold rolled steel sheets (GOST 19904-90):
• high-quality carbon steel, structural (08 kp/ps, 15 kp/ps, 25, 35, 45; 10 kp/ps, 20 kp/ps, 30, 40).

Factory packaging of galvanized flat and coiled sheets

Galvanized sheets are supplied from manufacturing plants in rolls or in bundles tied with metal tape.

Which factories produce sheet steel?

The main producers of steel sheets are:  

• West Siberian Metallurgical Plant (ZSMK OJSC)
• Magnitogorsk Iron and Steel Works (OJSC MMK)
• Chelyabinsk Metallurgical Plant (ChelMK Mechel OJSC)
• Cherepovets Metallurgical Plant (JSC Severstal)
• Zaporozhye Metallurgical Plant (JSC Zaporizhstal)
• Ashinsky Metallurgical Plant (JSC Ashinsky Metallurgical Plant)
• Metallurgical plant "Azovstal" (OJSC MK "Azovstal")
• Novolipetsk Iron and Steel Works (JSC NLMK)
• Metalloinvest (JSC Ural Steel)

Loading norm for vehicles

Transportation with a maximum load of up to 25 tons per vehicle is possible, while 3-4 rolls of sheet steel are loaded into one trailer (length 12 meters). In terms of volume, 4-5 packs of flat sheets fit into the same transport.

Loading norm for railway transport

When transporting sheet metal by railway trains, up to 70 tons are carried in one car, where flat sheet steel is in bundles. For example, steel sheets of 1 mm and 2 mm, as well as steel sheets of 3 mm, 4 mm and 5 mm, can accommodate 13-14 pieces. As for steel coils, some manufacturing plants use special platforms to deliver them to metal depots in Moscow. The loading rate on such platforms is 5-6 rolls.

Where is steel sheet used?

Black or galvanized steel sheet has a wide range of applications and is used in industries such as industrial and civil construction, mechanical engineering, carriage and shipbuilding, machine tool building, and agriculture.

What is the name of sheet metal in English?

Rolled sheet bar

Source: http://metalburo.ru/list/_entsiklopediya-stalnoy-list/

Wave slate sheet sizes

Slate is the most common roofing material, a leader in its field of application for several decades.

The name “slate” is not entirely correct; real slate is a natural layered mineral.

The exact designation of the roofing material sounds like asbestos-cement sheet, but the name “slate” has stuck for a long time and there is no point in changing it.

There are two main types of material available : flat and wave. Flat is used for facing work or for the construction of partitions for auxiliary and utility rooms.

Only wave roofing is used as a roof covering ; it is stronger and stronger than flat roofing due to the stiffening ribs created by the waves.

The long-term widespread use of slate is a consequence of high reliability, durability and ease of installation. The relatively recent appearance on the market of many alternative roofing coverings made of synthetic materials, metal or bitumen, has not been able to radically change the situation, since the traditional, time-tested approach to materials prevails among builders.

Technical characteristics of wave slate

Wave slate is a roofing material in the form of wavy sheets of rectangular shape. To produce slate, a plastic molding composition is used, the components of which are:

1. Portland cement. The grades used are M300-500, the percentage of material present is 80-90%.
2. Chrysotile asbestos. (10-20%).
3. Water.

Traditionally, the material is produced in a light gray natural color , but recently coating samples made with additives of dyes to give a certain color have appeared on the market, which has significantly improved the aesthetic perception of the material.

Installation is carried out by attaching overlapping sheets using slate nails to the rafter system. Ridges and connecting elements that make up the roof covering are also produced by industry, but often builders do not know about this and use metal elements, which worsens the appearance of the roof.

Wave slate sheet sizes (7 and 8 waves)

According to GOST, there are only two standard sizes:

1. 40/150 — wave height 40 mm, wave length — 150 mm.
2. 54/200 — wave height 54 mm, wave length — 200 mm.

The dimensions of 8-wave slate also vary depending on the type. By profile type, sheets are divided:

Unified

Marked with the abbreviation UV.

Slate 8 wave sheet size:

• Sheet width - 1130 mm;
• Length - 1750 mm;
• Sheet thickness is 5.8 mm for profile 40/150 and 6-7.5 mm for profile 54/200.

Slate size 7 wave:

• Sheet width - 980 mm;
• Length - 1750 mm;
• Sheet thickness is 5.8 mm for profile 40/150 and 6-7.5 mm for profile 54/200.

Slate size 6 wave:

• Sheet width - 1125 mm;
• Length - 1750 mm;
• Sheet thickness is 5.8 mm for profile 40/150 and 6-7.5 mm for profile 54/200.

Wave slate size

Ordinary

Denoted as VO.

• Sheets 680 mm wide;
• length - 1120 mm;
• sheet thickness 5.8 mm for profile 40/150 and 6-7.5 for profile 54/200.

The size of 8 wave slate can vary within small limits.

Reinforced

The profile marked VU is intended for industrial purposes, has an increased thickness - 8 mm , sheet width 1000 mm, length - up to 2800 mm.

The maximum permissible dimensional deviations are ±15 mm in length and +10 and -5 mm in width.

Number of waves

The number of waves is already determined by the name - 7-wave and 8-wave.

In individual construction, a 7-wave sheet is most often used, since it is lighter and easier to lift to the installation site manually.

At the same time, its useful area is smaller than that of an 8-wave one , since the amount of overlap for both brands is the same and the difference of one wave is not compensated for by anything.

However, a study of demand shows the predominant use of the 7-wave option.

How much does a slate roof weigh?

The weight of the sheet is an important indicator on which the load on the rafter system depends. So, let's find out how much a sheet of 8-wave and 7-wave slate weighs.

The weight of the 40/150 profile sheet is:

• 23.2 kg - weight of 7 wave slate;
• 26.1 kg - weight of 8 wave slate.

For profile 54/200, the weight is 26 and 35 kg, respectively.

The weight of 8 wave slate 1 m2 is approximately 10.41 kilograms.

It is noted that the weight of slate is greater than that of its competitors among roofing materials, which creates certain requirements for the design of the rafter system. Wind and snow loads should also be taken into account ; with a large roof area, the weight of water absorbed by the coating during rain can play a role.

Weight of corrugated slate

Effective area

The sheets are installed with an overlap, 1 or less often 2 waves are overlapped. In this case, the useful area of ​​the sheet is reduced by the amount of overlap.

• For a 7-wave sheet, the usable area is 1.336 square meters. m .;
• wave slate is 1.57 sq.m.

The dimensions are indicated with an overlap of 1 wave, which is most often used in construction. Sometimes in some places it may be tempting to lay the sheet end-to-end to save material.

Saving one or two sheets will result in water entering the room.

Advantages and disadvantages of slate covering

Wave slate has a number of undeniable advantages:

• Long service life. On average, the coating retains its quality for about 40 years or more, depending on the conditions of use. It is noted that even under the most unfavorable factors, the coating lasts at least 10 years.
• Easy to install . The work does not require high qualifications; it is enough to have a general understanding of installation techniques.
• Allows partial repair or replacement of individual sheets that have become unusable.
• The strength of the material contributes to safety during installation - the slate covering can easily support the weight of a person and allows walking on the covering.
• Does not accumulate electric charge , absolutely safe in terms of fire.
• Much cheaper than other roofing materials.
• The relatively light weight of the coating allows you to do without construction lifting equipment during installation.

It is impossible not to mention the negative qualities of slate. These include:

• Fragility of the material . Slate is not plastic and does not allow any deformation.
• The ability to absorb moisture shortens the service life and causes the formation of fungus, mold, and over time moss appears, which must be cleaned off. This deficiency can be neutralized by coloring.
• asbestos as a component of the material is a significant health hazard.

This is the main reason for the displacement of slate from the market, although there are no definite medical statistics on this matter. There is data for enterprises showing the percentage of morbidity among workers, but there is no statistical information for residents of slate-covered houses.

Nevertheless, the danger exists and must be taken into account. Installation work should be carried out using personal respiratory protection.

Material deficiencies can be neutralized without any particular difficulties, you just need to be aware of them and take appropriate measures to prevent possible incidents. At the same time, the obvious advantages, tested and confirmed by many years of practice, convincingly speak in favor of slate as an advantageous and reliable roofing covering.

Source: https://iv-proect.ru/krysha/shifer-volnovoj-razmery-lista.html

Weight of galvanized sheet according to GOST 0.5, 0.7, 1, 2 mm. Specific gravity table

The inherent disadvantage - corrosion - is eliminated by several methods:

• Application of corrosion-resistant substances that protect the top layer. The service life of such protection is 1-7 years.
• Introduction of elements of other metals into the upper part of the surface (zinc plating). The protection period is more than 20 years.

For critical structures, it is important to take into account the technology that determines the total mass. Among all the methods, the best parameters are the introduction of zinc into the surface, since the weight of the galvanized sheet varies over a wide range (depending on the thickness), and the adhesion strength is ensured by bonds at the molecular level. Unlike all types of coatings, this one provides the highest possible adhesion of 2 metals in a layer that is taken into account only in microns.

Why do you need to know the mass of a leaf?

The weight of the structure is calculated at the design stage. This is an essential component of the safe construction and operation of buildings. Since galvanized steel 1 mm, the weight of 1 m² varies within a few kilograms, then, depending on the dimensions, the mass of the overall structure is taken into account in tons, which can already increase it.

The second reason why you need to know the specific gravity of galvanized steel is to determine the thickness of the material and its workmanship. Precisely maintained technology is determined by the exact ratio of the declared mass to the tabulated or formula-calculated value.

Assortment according to GOST

The products of any manufacturer of galvanized steel must comply with GOST 14918, on the basis of which technological maps are developed that are valid within one enterprise. The standard applies to thin-sheet galvanized steel made:

• cold drawing method;
• for delivery in rolls or sheets;
• hot or cold galvanizing method;
• for stamping and profiling.

In galvanized sheets manufactured according to GOST 14918 80, the weight varies between 3.34-19.82 kg/m².

Source: https://punktpriema.ru/articles/ves-otsinkovannogo-lista.html

Sheet metal weight

\Sheet metal weight

Cold rolled sheet GOST steel 08ps/kp	Weight of one meter square m2 (kg)
Cold-stained sheet 0.5	3,925
Cold-stained sheet 0.6	4,71
Cold-stained sheet 0.7	5,5
Cold-stained sheet 0.8	6,28
Cold-stained sheet 0.9	7,06
Cold-stained sheet 1.0	7,85
Sheet cold-stained 1.2	9,42
Cold-stained sheet 1.4	10,99
Cold-stained sheet 1.5	11,77
Cold-stained sheet 1.8	14,13
Cold-smoked sheet 2.0	15,7
Cold-stained sheet 2.5	19,62
Cold-smoked sheet 3.0	23,5
Cold-stained sheet 3.5	27,47

Sheet metal weight

Hot rolled sheet GOST steel st3sp/ps5	Weight of one meter square m2 (kg)
Hot rolled sheet 1.5	11,77
Hot rolled sheet 2.0	15,7
Hot rolled sheet 2.5	19,62
Hot rolled sheet 3.0	23,5
Hot rolled sheet 4.0	31,4
Hot rolled sheet 5.0	39,25
Hot rolled sheet 6.0	47,1
Hot rolled sheet 8.0	62,8
Hot rolled sheet 10.0	78,5
Hot rolled sheet 12.0	94,2
Hot rolled sheet 14.0	109,9
Hot rolled sheet 16.0	125,6
Hot rolled sheet 18.0	141,3
Hot rolled sheet 20.0	157

Galvanized sheet GOST steel 08ps/kp	Weight of one meter square m2 (kg)
Sheet ots. 0.4	3,34
Sheet ots. 0.45	3,73
Sheet ots. 0.5	4,13
Sheet ots. 0.55	4,52
Sheet ots. 0.6	4,91
Sheet ots. 0.7	5,70
Sheet ots. 0.75	6,09
Sheet ots. 0.8	6,48
Sheet ots. 0.9	7,27
Sheet ots. 1.0	8,05
Sheet ots. 1.2	9,62
Sheet ots. 1.5	11,97
Sheet ots. 2.0	15,9
Sheet ots. 2.5	19,82

Weight of stainless steel sheet: weight of stainless steel 2 mm, 1 mm, calculation of weight of sheets

How to determine how much a 2mm stainless steel sheet weighs? Such information is often of interest to our company’s clients. Understanding its importance, we have implemented the required functionality on the site. Specialists of the Regional House of Metal company offer you a convenient tool for accurately calculating the mass of products in your order - a stainless steel weight calculator. You can get the result both for 1 piece and for the batch as a whole. Accuracy 100%. All sheets are stainless.

How it works? Using the calculator is very simple. In the settings you set:

• Steel grade;
• Thickness of the product;
• Length and width;
• Number of pieces.

Weight of stainless steel sheet 2 mm

Do you need to find out the weight of a stainless steel sheet of 1 mm or 2 mm? It couldn't be easier to do this. Select the alloy grade, thickness, other parameters and in the “quantity” column set 1 pc. Click the “calculate” button and get the figure you are interested in. For example, a 2 mm sheet of steel 12Х18Н10Т with dimensions 1000x2000 weighs 32 kg.

Useful links:

Why might you need information about the weight of a product? For example, you are planning to cladding a certain object with metal, but there is a limit on the weight of the finishing material. In this case, the calculator will allow you to find out in advance how much a 1 mm stainless steel sheet weighs before you place an order and pay money. Convenient, isn't it? If the vehicle used for transportation has restrictions on the weight of the cargo transported, this information is extremely important.

Stainless steel sheet weight

In addition to the online calculator, there is also a special application. Now you can calculate the weight of a stainless steel sheet, even without access to the Internet. Download it and install it on your computer or laptop. Now the necessary features will always be at hand.

Calculate the weight of a 3mm stainless steel sheet, or any other thickness, using an offline program. It works quickly, error-free, is not demanding on your PC's resources, and takes up very little space on your hard drive.

For example, you need to know the weight of a St20 sheet with a length of 2500 mm, a width of 1250 mm and a thickness of 2 mm. Adding these values ​​you get 49 kg. weight and 3.13 m2. area.

If you need to know the weight of, for example, a ventilation pipe, then you can look at this information directly on the product page.

How to calculate the weight of a stainless steel sheet if you do not know what grade of steel was used to make it? In this case, you can get an approximate value by setting st10/st20 in the settings. The error will be small, and you will receive the necessary data. Is it possible to do this without a program and an online calculator? Before the advent of computer technology, the formula m=7.85*V was used:

• V – sheet volume;
• V = thickness times width times length (example 0.5 x 1000 x 2000);
• 7.85 – average density value.

If you are interested not in the weight of the product, but in its price, then on almost every page we have a detailed table with all prices. Here is the page for the copper circle: http://rdmetall.ru/cvetmet/mednyj-prokat/mednyj-krug/.

Source: http://RDMetall.ru/prokat-nerzhaveuschiy/list-nerzhaveyuschiy/ves-nerzhaveyuschego-lista/