Magnetic pullers
Today it is impossible to imagine trade without a system of special anti-theft devices. Most modern shops and supermarkets in Kemerovo cannot do without special measures to protect their products from theft or any unauthorized removal from the territory of the outlet.
How does the goods security system work?
- At the entrance/exit of the store's sales area, near the cash registers, control frames or antennas are installed across the aisle, usually at a distance of about 1 meter.
- Protected goods or boxes of goods are usually equipped with labels or tags with a magnetic beeper tag.
- If the product is purchased as usual, at the checkout the cashier removes the tag or deactivates it with a special anti-theft remover.
- If the removal of products occurs unauthorized, a sound signal is heard - the frames located at the exit from the sales area react.
The main function of the anti-theft sensor remover is to demagnetize the tag or divide it into two parts for subsequent removal from the product.
Such devices are magnets made of a special neodymium alloy with a powerful magnetic field, which is located inside a galvanized metal case.
Where is the largest selection of pullers?
Our online store offers a wide selection of magnetic pullers, without which the property security system cannot operate. Specific pullers are offered for different product groups:
- Magnetic tag deactivator.
- Magnetic clothes remover.
- Reinforced puller.
- Universal magnetic puller.
The classification of devices is determined by the strength of the magnetic field they create. Each puller has its own parameters that determine their capabilities and scope of application. These devices have many positive qualities:
- Reliable and durable.
- They do not demagnetize.
- No electrical connection required.
- Can withstand heavy loads.
Which pullers are most in demand?
The greatest demand is for universal pullers, which can create great forces and are used for quickly removing any magnetic tag or label.
If you follow the operating rules of the devices, they can be used for a long time. Since the puller is designed to demagnetize labels and tags, it is imperative to preserve the properties of the neodymium core located inside the case, and for this it is necessary:
- Protect the device from moisture, which can destroy the galvanized body of the puller.
- Do not heat it above 80 degrees, as this may affect its magnetic properties;
- Do not cool below -50 degrees, as the material may become brittle and mechanically break down.
To avoid the influence of the magnetic field on storage media or other electrical devices, it is not recommended to store pullers near them.
How to order a puller?
In our store we offer a large assortment of pullers for special tags and labels. After reviewing the catalog on the store’s website, you can select the device or several devices you need, or buy a universal puller. If you order several identical devices, it is not necessary to order them one by one. Find a shopping cart on the website that has a tab where you can mark the quantity of each item you need.
To clarify the characteristics of the product, you can always call by phone. After this, the order is placed, and if everything is completed correctly, you will receive confirmation of order acceptance to your address.
If you order devices by phone, our specialists can advise specific types of pullers that are more suitable for working with your product and your anti-theft system. We sell magnetic pullers not only in Kemerovo, but also to customers from other cities. Orders are accepted from both legal entities and individuals. Payment is possible in cash or by bank transfer.
Source: https://magnitsouz-kemerovo.com/shop/magnitnye-semniki/
What is a magnetic puller
Magnetic protective devices work on the principle of magnetization. Devices to prevent theft of goods are made in the form of shells, mini-sensors and tough anti-theft devices. Anti-theft devices have some special features, so to unlock them you need different magnetic pullers, which you can buy from our company:
- The design of the product is a body made of anodized aluminum.
- The main element is neodymium magnets that create a powerful magnetic field.
- The principle of operation is that a tag is applied to the magnetic clothes remover and the protective device is demagnetized.
- The magnetic field of neodymium neutralizes and demagnetizes the lock, releasing the needle-shaped beeper pin.
- The action of the magnetic field created by the puller is very strong in one direction, and almost inactive in the opposite direction.
Using a magnetic remover, you can remove anti-theft agents from clothing and other goods without damaging the product. In our online store you can buy magnetic pullers in Kazan of various designs and purposes. If you don’t know exactly what device you need, call us - the company manager will recommend the most suitable option.
What types of magnetic pullers are there?
The main purpose of anti-theft devices is to prevent unauthorized removal of goods from a store or supermarket. Depending on the type of product, a protective magnetic device is selected. To unlock the attachments, different magnetic pullers are required:
- RF tag remover for universal or reinforced type tags. “Works” in conjunction with a security anti-theft frame at the entrance to the store. You can buy a universal puller from us that is suitable for most anti-theft devices.
- Electromagnetic puller. Used to unlock magnetic labels. Deactivation occurs when the label touches the remover. Available in two versions - round and rectangular pullers.
- Acoustomagnetic puller. Reliably protected from interference and false alarms. Suitable for deactivating a certain type of sensors, operates at a frequency of 58 Hz, and resembles a scanner in appearance.
The anti-theft remover allows you to avoid taking goods outside the outlet and preserve the integrity of the property of the store owners. To properly organize an anti-theft system, you need to choose the right magnetic puller of a universal, standard or reinforced type.
Features of anti-theft removers
To ensure that goods are protected from theft, tags, sensors, beepers, clips, and labels are attached to the products. To deactivate the alarms, a puller is used that operates using a neodymium magnetic field. Magnetic puller options:
- Reinforced anti-theft sensor remover. Easy to use continuous device. Suitable for various anti-theft devices, does not give false alarms.
- Standard magnetic attachment. Used to deactivate clips, it is compact in size and light weight, and works with certain tags.
- Universal remover for deactivating protective devices of different product categories. The magnetic tag remover is applied to the clip and the security lock is deactivated.
Our company’s website presents a large selection of magnetic products based on the unique properties of neodymium. Choose the magnetic products you need, and we will arrange delivery of the goods.
Source: https://magnitsouz-kazan.com/shop/magnitnye-semniki/
What types of neodymium pullers are used most often?
Magnetic neodymium pullers are classified depending on the strength of magnetic attraction. The following pullers are available:
- universal;
- reinforced.
More powerful magnets can remove more clips or tags. A magnetic tag remover with amplification is more suitable for a large supermarket or shopping center where it is necessary to simultaneously deactivate several sensors on a large number of products. In addition, reinforced pullers have a greater range and can be used in large retail areas or entrance areas of large enterprises or institutions.
The most common and popular are universal pullers for quickly deactivating a tag without connecting to a power source. You can buy a magnetic tag remover on our website at affordable prices from the manufacturer. If you haven't found the puller you need in the catalog, we will make them for you on an individual order. Our consultant will help you choose a device with the most suitable characteristics for your tasks.
Why do we need anti-theft labels?
A clothing magnet or anti-theft label protects goods from theft or accidental removal outside the store or department. A magnetic anti-theft tag prevents an attacker from picking up an item without paying first at the checkout. Such a tag can only be deactivated using a special remover, and often the buyer has no idea where exactly the tag is located on the package or product.
Advantages of neodymium magnetic pullers:
- reliability and durability;
- wear resistance and, as a result, almost unlimited use;
- no need for power supply;
- high resistance to loads and low demagnetization over decades.
Where can I buy a magnetic clothes puller wholesale?
Our online store offers a wide range of anti-theft pullers for shops and retail outlets. You can buy a magnetic puller wholesale without leaving your home by filling out an order online on our website. All you need to do is select the product you need, add it to your cart, indicate the quantity and submit your order. Our manager will contact you as soon as possible to agree on a convenient form of transaction, payment and delivery.
If any item is out of stock, we will contact the supplier and deliver to you as quickly as possible. Since we work with the manufacturer, we can provide certificates and other necessary documents for products. We guarantee the quality of magnetic products and high-quality service. If you decide to buy a magnetic clothes puller for your store, be sure to take a look at our catalog; prices and discounts for wholesale customers will pleasantly surprise you!
Source: https://magnitopt-yekaterinburg.com/shop/magnitnye-semniki/
What types of pullers have become widespread?
The classification of magnetic pullers most often depends on the field strength. There are universal and reinforced pullers. The stronger the magnetic field, the more labels they can remove.
In large stores, universal pullers are often used, since they can affect different sensors at the same time and can deactivate different products. A distinctive characteristic of the reinforced puller is its impressive coverage area. They can be used to provide product protection in a large store or enterprise.
Universal devices are the most widespread. They make it possible to remove any magnetic sensor. Plus, they do not require connection to an additional energy source. You can choose a suitable universal magnetic puller in Chelyabinsk, without getting up from the couch. All you need to do is select a product and create a request.
The anti-theft sensor remover will only be unlocked when the item has been paid for. In the catalog of our online store you will find a large assortment of these products. Each device has its own technical parameters that determine the scope of its use.
Why do you need an anti-theft system?
Anti-theft sensors are elements of a product protection system. When removing goods, a signal may sound. Thus, thieves have no chance of taking away the goods without paying. To deactivate sensors, special devices are used that remove protection after payment. The buyer sometimes doesn’t even know where it is.
We list the main advantages of neodymium pullers:
- Reliability;
- Unlimited usage possibilities;
- These systems do not require additional power;
- They can withstand even greater loads.
Where can I buy anti-theft removers?
You can buy universal magnetic pullers in our store. It is enough just to study the catalogue. If you need to purchase several units, you will not need to place an order individually. You can immediately add the required number of units to your cart and then fill out the application. If this operation is performed correctly, you will be able to receive confirmation some time later. You can also place an order by calling the number listed in the contact section.
Our store specialists will help you choose the best option for devices, taking into account all the features and characteristics of your facility. We sell magnetic products in Chelyabinsk. Payment in cash and non-cash is possible. Delivery of goods is carried out directly by our employees. If necessary, we also offer system installation services.
Source: https://magnitsouz-chelyabinsk.com/shop/magnitnye-semniki/
What types of magnetic pullers are most commonly used?
The classification of such equipment depends on the strength of the magnetic field. There are universal and reinforced removable devices. The more attractive force they have, the more tags they can remove.
Universal removers are more often used in large supermarkets, since they act simultaneously on various sensors and are capable of deactivating a large amount of goods.
The reinforced magnetic puller has a large coverage area, so they are designed to protect the property of a large shopping center or enterprise.
The most popular, however, are universal pullers that allow you to quickly remove any tag. In addition, they do not require connection to a power source. You can buy a universal puller without leaving your home. To do this, you need to select the product you like and place an order.
Typically, the anti-theft sensor remover is unlocked after the product has been paid for. The site's online catalog has a large assortment of similar products. Each device has its own characteristics, which help determine the scope and conditions of their use.
What are anti-theft labels used for?
Anti-theft tags, or labels, act as magnetic protection against theft or accidental removal. In this case, the alarm of the anti-theft system is triggered, as a result of which the attacker has no chance to remove the unpaid goods. Deactivation is carried out using a special device that removes the protection after the buyer pays for the goods. Often the buyer does not know where in the package it is present.
The advantages of non-magnetic pullers are:
- in their quality and reliability;
- in their large, almost unlimited use;
- such systems do not require connection to a power source;
- they are able to withstand heavy loads.
Where to buy an anti-theft remover?
You can purchase the device in our online store. To do this, you need to familiarize yourself with the catalog. If you need to order several identical products, you do not need to order them individually. To do this, there is a tab in the cart where the quantity of goods is noted. After this, fill out the order form. If the procedure is completed correctly, confirmation should arrive after some time.
You can order a purchase by phone, which is available in the store coordinates section. In this case, our specialists will select the equipment that best suits the security systems of your particular outlet.
Our online store sells magnetic pullers in Samara and beyond. Orders are accepted from both individuals and legal entities. Payment is made by bank transfer and cash. The goods you ordered are delivered by store employees. They can also install the system if necessary.
Source: https://magnitsouz-samara.com/shop/magnitnye-semniki/
Magnetic puller
Anti-theft sensors are now used in almost all large stores and supermarkets. Such sensors help protect goods from theft and removal outside the store. In order for a store employee to be able to remove these sensors when purchasing goods, there are special magnetic removers for such sensors.
Now almost every store is trying to use such protection against theft of goods. Because security and video cameras are no longer able to cope with enterprising people who like to take goods out of the store in an illegal way. Such sensors can protect any type of product from theft and thereby protect the store from major losses.
We have a large selection of such equipment on our website, and buying a magnetic puller for a certain type of sensor will not be difficult. Magnetic pullers may vary depending on the sensor type.
Anti-theft sensors and their types
The operation of such devices is based on the ability to detect them between special frames that are located at the exit from the shopping area or at the checkout when trying to remove an unpaid item.
If an attempt is made to carry this product with an attached sensor through special devices at the exit of the retail premises, a signal is triggered in the form of a loud sound or color detection.
For the manufacture of such sensors, flexible or hard disks are used. Hard drives are most often represented by clips. In such devices, the sensor is located between plastic elements that are attached to the product in such a way that it cannot be removed manually.
The “bottle” sensor consists of a plastic shell with a special rope that tightens the neck of the bottle. When such a cable breaks, a signal appears in the form of a sound.
Flexible sensors most often look like stickers that are attached to a product. They can be white or black with barcodes.
Depending on the type of product and the type of anti-theft sensors, the pullers for them also differ. Magnetic sensor pullers are presented on our website in a large assortment.
Types of magnetic pullers for rigid sensors
Sensors with magnets cling to clothes, most often in the seams, which cannot be removed independently, so as not to spoil the product. Such sensors consist of a small nail and plastic components, inside of which there are magnetic balls. With this nail, the clothing is pierced through the seam area and a plastic base is placed on top. There, magnetic balls firmly clamp the nail, and it is impossible to remove this tag without a special device, without damaging the item.
A magnetic clothes puller is used for this. Its operating principle is quite simple - the cashier places this sensor on the puller and the magnetic balls move apart, which allows the jammed nail to be released and the tag can be easily removed. A universal magnetic tag remover is used for clothing. Our website offers a wide selection of such pullers at an affordable price.
For bottle type sensors, a universal puller is used. This sensor works on a similar principle to clothing tags. Only the role of a stud is performed by a special cable. The sensor is placed on the neck of the bottle and the cable is tightened like a noose. It is clamped with the same magnetic balls in a plastic clip, and it is impossible to remove such a tag from the bottle without a special device.
Such a device can be a magnetic universal puller, which is applied to the clip and the balls move apart, thereby releasing the cable, it relaxes and makes it possible to remove the sensor from the neck. Such sensors are more often used in liquor stores or supermarket departments where elite, expensive products are sold.
Flexible sensors are very often used in the produce departments of supermarkets and in the office supply departments. Such stickers are not removed by the cashier, but are deactivated using a special device. This device is permanently attached to the cash register, and can only be used there.
Most often, such a device has the appearance of a pistol, and its operation occurs mechanically.
Operating principle of the tag remover
This type of puller is equipped with a special configuration of constant-field magnets inside the upper aluminum housing. The design of such a device is based on the Halbach principle. This means that there is no magnetized field from below the device. But on the surface, which acts as a working surface, this magnetic force is greater than that of a standard magnet.
Many believe that such tags can be removed using a regular magnet with a neodymium alloy. But this is a false misconception. These sensors can only be removed with special pullers, which are made according to the principle described above.
You can buy a magnetic tag remover on our website. Our company presents the main models of such devices:
- universal;
- standard;
- reinforced.
All these types of pullers can work with any hard types of anti-theft sensors. We maintain our reputation and value the opinion of every client. Our specialists will help you choose the necessary puller for different types of magnetic sensors.
A magnetic sensor remover is required in every store that uses anti-theft sensors. Using such a device, the cashier can deactivate the sensor, and the buyer can safely pass through the security arches.
Source: https://magnetmos.ru/shop/magnitnyi-semnik/
What is a magnetic puller
Clothing stores are visited by a large number of customers, making it very difficult for security representatives and sellers to keep track of everything. To help workers in this area, the owners install special frames at the entrance and exit - anti-theft systems. Such devices respond to certain sensors that are attached to clothing. They can only be removed using a magnetic remover.
Types of protection sensors
There are several most common types of these devices:
- Systems with an anti-theft electromagnet. In such a sensor, the emitter and receiver are fixed on different parts. As a result, a powerful electromagnetic field is formed, the frequency of which ranges from 10 Hz to 20 kHz. To deactivate such protection, the tag must be rubbed against a magnetic surface.
- Acoustomagnetic systems. In such devices, the magnetostrictive strip is not fixed and can freely oscillate mechanically. When such a tag is placed in a special “anti-theft” frame installed at the exit, it will begin to create vibrations when leaving the store. Magnetic tag removers are used for deactivation.
- Protection systems using radio frequencies. Such devices consist of an inductor, a capacitor and an oscillating circuit. It is to these that the protective frames installed at the exit react. A strong magnetic field of about 8.2 MHz is required for deactivation.
- RFID tags. This is a special type of sensor. Such devices are used not only for protection, but also in transport travel cards and hotel key cards. You cannot deactivate an RFID tag; you can only change the information in it, which is what cashiers do after the sale.
- Hard sensors. Such devices may have a magnetic or mechanical lock.
Sensors with magnetic lock
Basically, such devices for protecting goods from theft have a universal lock, but there are other types that are very rare.
Types of sensors with a universal lock:
- Standard. To remove such protection, a magnetic force of 4000 Gauss is required. You can remove it using a large neodymium magnet.
- Reinforced. Even the most powerful device will not help here. To remove it you will need a magnetic puller. The required force is on average 8000 Gs.
- Super block. You need a puller for 9000–11500 gauss.
- Hardlocks are considered the most powerful and reliable sensors. Currently, only two companies produce such protection: Dural Tag and Check Point. To remove them, a force of 14,500 to 18,000 Gs is required. Due to their properties, their price is noticeably higher compared to other companies.
Types of removable systems
Devices for removing sensors from goods have several classifications. They are distinguished according to the principle of operation:
- magnetic;
- mechanical;
- automatic systems.
A magnetic remover is a device designed to remove sensors from a product. A magnet is built into the design of this unit. Such devices are mainly located at the checkout and, depending on the strength, are used to remove various types of sensors. The system operates autonomously from the power supply network. The service life is unlimited.
According to the principle of structure, magnetic deactivators do not differ significantly. These mechanisms are classified according to the power of the emitted pulse and its shape. The ability of a device to simultaneously remove one or another number of sensors is determined by the strength of the conducted magnetic energy. Stores, as a rule, install standard devices with low power ratings. For example, a magnetic clothes remover used to remove ordinary “squeaky” tags.
For new types of sensors, more advanced types of deactivators are required. Such devices are made of aluminum and are considered universal because they can be used to open locks of different tags.
The device consists of several magnets connected to each other. Thanks to this, a powerful force field of directed action is created. This deactivator is a reinforced magnetic remover; it is attached with screws to the surface of the cash register table.
This device can remove hard sensors, standard and with a reinforced lock.
Working principle of magnetic puller
A sensor is attached to a product to protect it from theft from the sales floor. The devices vary in size and shape. The “squeaking” sensor is a protective clip, which is a plastic case containing a mechanical system inside. It can have a different structure, for example, in the form of a steel rod installed between two metal balls on springs.
The principle of operation of the magnetic tag remover is to generate a powerful directed pulse, which moves the steel balls in different directions and removes the main rod. As a result of the impact, the protective clip of the sensor opens and can be removed from the product without mechanical damage.
Application of magnetic pullers
The main area of use of such devices is trade. Sellers use them to deactivate sensors that protect goods from theft. Less commonly, magnetic clip removers are used in everyday life. Using it, you can create a system based on a magnetic lock, which is how some car owners protect their car headlights from theft.
Source: https://FB.ru/article/426004/chto-takoe-magnitnyiy-syemnik
Variety of magnetic pullers and their applications
The classification of the product depends on the attractive force of the magnets. There are improved and universal removable designs. The strength of the magnetic field affects the number of tags removed.
Supermarkets prefer universal removers because they work on various devices at the same time and can deactivate multiple purchases. The improved magnetic puller has a larger operating radius and is used by businesses or retail centers to save property. The demand for universal pullers is increased, because they quickly remove the clip from the product.
You can buy a universal puller here and now. Our online store in Perm offers a wide range of magnetic products. Hurry up to choose and order a product by filling out an application.
As is customary, the unlocking of the anti-theft sensor remover is carried out after payment for the purchase. In the electronic catalog of our website you will find a huge selection of this product. The technological characteristics of the magnetic device make it possible to find an area of application.
Purpose of anti-theft tags
Anti-theft clips are a magnetic protector that protects against theft and illegal removal of products. The operation is based on an alarm system, which deprives the attacker of the chance to remove the product without paying for it. A special device is used to unlock products when payment is made. Sometimes the client is not aware of where the protection is located on the packaging container.
Distinctive properties of neodymium pullers:
- quality;
- reliability;
- long shelf life;
- no need for power supply;
- ability to withstand heavy loads.
Where can I buy an anti-theft clip?
Our online store in Perm provides the opportunity to buy an anti-theft puller. The catalog will help you choose the right product. If you need to purchase identical products, use the tab to mark the required quantity of goods in your cart. The product can be purchased by placing an order by phone. Our staff will help you choose the right products.
Our online store sells neodymium pullers not only in Perm, but also in other regions of the Russian Federation. We work with legal entities and individuals. Payment – bank transfer and cash. The courier will deliver the purchased products within a short time.
Source: https://magnitsouz-perm.com/shop/magnitnye-semniki/
How does magnetic equipment work against intruders?
A rigid spherical tag (magnet) is installed on clothing or any other product (bag, bottle, shoes, etc.). When you try to take the goods out of the retail area, a corresponding signal is triggered, making it clear that the swindler passed by the cash register without paying for the purchase.
We hasten to disappoint resourceful tricksters - there is no question of unlocking, removing or disabling the magnetic sensor. At a minimum, for this you need to keep a heavy-duty magnetic carrier in your bosom, which will be revealed immediately upon entering the sales area by a special frame. Security will receive an alarm and conduct a proper search of the violator.
In addition to the safe sale of products and goods in stores and self-service supermarkets, “withdrawers” are used in libraries, pharmacies and even in safe deposit boxes to save money.
There have been cases where a magnetic clothes remover was used in industrial enterprises. Teams are different, no one can guarantee the reliability of the staff and, accordingly, the safety of storing personal property until the end of the shift.
The principle of operation of the “puller” in production or in the office:
The manager purchases a complete Anti-Theft system and installs a “control frame” at the exit from the enterprise (office). Magnetic tags are attached to any part of employees' clothing or their belongings stored in separate lockers. If you try to take, for example, a stolen bag outside the institution, the security system will be activated (with a sound or light signal).
How to remove a tag from clothing when purchasing a product legally?
Almost all consumers have encountered the fact that after choosing a purchase in a store, they go to the checkout point (cash register) and there the seller removes the protective hard label (tag) from the product. What device is used to unlock?
A magnetic tag remover is an integral attribute of the entire security system against the illegal removal of goods, consisting of an alloy of iron, boron and neodymium. With its help, the seller, after paying for the purchase, deactivates the indicator protection with a light and quick movement when the magnetic protective disk enters the puller area.
Classification of magnetic pullers
“Deactivators” are differentiated depending on which clips are used in conjunction with the puller and on the type of design (technology):
- flexible labels - in the form of a sticker or label. This is a sensor that is attached to small products. If a thief tries to remove the sticker or cut it into two parts, the security system will still detect him at the exit of the store.
- radio frequency plates - work in conjunction with the “security gates” installed at the exit from the point of sale. This design can be removed from the item at home without damaging it. The operating frequency at which the security system operates is 8 MHz.
- Acoustic-magnetic sensors are a “clip” made of polymer material with a metal spring. There are metal balls at both ends of this spring. Operating frequency 58 – 60 KHz. If an attacker tries to remove the clip from the object with his hands, the opposite effect may occur: the clip will close with even greater force. The neon indelible paint inside the tag can permanently ruin the “appearance” of the thief.
- electromagnetic mechanisms: have a large coverage area and provide maximum protection against theft.
- multifunctional (universal) systems – for working with different types of sensors at one point of sale.
Depending on the principle of operation, the removable system is:
- Automatic;
- Mechanical;
- Magnetic.
Our company offers to purchase a magnetic puller for sensors of a modern model, which has special qualities:
- small installation base;
- basic use;
- effective security provision;
- does not require connection to power supply.
The best solution to protect your business is to purchase a universal system that contains magnets with increased power. With the help of such a removable design, you can unlock both domestic and foreign security mechanisms.
Our company offers you to buy a magnetic puller , which can be installed in the cashier’s work area without any problems or can be portable (portable). The universal system is suitable for all types of security tags. Excellent quality and reasonable price will pleasantly surprise you.
Source: https://magnetgold.ru/shop/magnitnye-semniki/
Universal magnetic sensor pullers
There are three types of anti-theft sensors, each of which has its own characteristics and is used in a specific area:
- Acoustomagnetic;
- Radio frequency;
- Electromagnetic.
Universal pullers are designed to deactivate sensors of any type. These devices are made of neodymium magnets of varying polarity and power, which are combined in such a way as to provide a powerful magnetic field at a certain point in the core.
Features of using anti-theft magnetic clip removers
Modern magnetic removers are quite versatile; they allow you to remove security tags from clothes, bags, shoes, bottles and other goods. The operating principle of this device is quite simple: the cashier places a security tag in the middle of the puller, after which a click sounds and the tag is automatically released. There are several reasons why you should buy and use a magnetic puller:
- Ease of operation;
- High reliability and durability;
- Affordable price;
- Cost-effective;
- It does not require special care;
- Virtually unlimited service life;
- Safe for human health and the environment;
- Does not require electricity to operate.
The benefits of using magnetic sensor pullers are obvious. If you are planning to purchase such devices, then you should definitely check out our range. We offer for sale only high-quality products from proven and reliable manufacturers at the most affordable prices, and we carry out both retail and wholesale deliveries.
Universal magnetic sensor pullers - operating instructions
The design of magnetic pullers for anti-theft sensors and security tags is based on powerful neodymium magnets, as a result of which when using these products it is recommended to follow the following rules:
- Do not bring flash drives, hard drives and electronic devices: mobile phones, tablets, etc.;
- Do not bring other neodymium magnets near;
- Do not allow heating above the permissible temperature;
- Do not process mechanically;
- Protect from falls and impacts.
Magnetic pullers generate a strong directional magnetic field that can disrupt the operation of electronic devices, and therefore people with electrical pacemakers should exercise extreme caution. If you are going to buy a magnetic puller in Moscow, then knowing these features will help you avoid a lot of problems in the future.
Characteristics of magnetic anti-theft clothing clip removers
Modern magnetic pullers have the following characteristics:
- Body in the shape of a truncated cone made of aluminum;
- Inside the case there is a system of several neodymium magnets;
- Weight – about 430 grams;
Dimensions – 75x36 mm.
Our range
The Homemagnit.com online store offers you high-quality anti-theft magnetic clip removers. In our assortment you will find:
- Pullers with a deactivation power of 10,000 GS;
- Reinforced pullers for 12000 GS.
If you own a clothing store, then using plastic anti-theft tags, tags, shell detectors, etc. will protect your goods from theft. As a rule, such a remover is installed at the checkout, where the sensors are subsequently removed after the buyer pays for the purchase.
How to buy a magnetic puller in Moscow
To purchase an anti-theft sensor remover in our online store, you need to follow a few simple steps:
- Select a puller with the necessary parameters from our catalog;
- Add to cart and go to checkout page;
- Fill out the application form, making sure to indicate the method of payment and delivery;
- Submit the completed application;
- Confirm the order.
You can also contact us by phone by calling or requesting a call back. We will be happy to advise you on any questions you may have and help you make a choice, after which we will accept and place your order.
You can pay for your purchase in cash upon receipt or by bank card or electronic money when placing an order online. Delivery is made throughout Russia. We provide additional discounts to wholesale buyers depending on purchase volumes.
All our products come with a 30-day warranty, during which you can easily return or exchange your order, even if you have lost your sales receipt or receipt.
Our advantages:
- Magnetic security tag removers for clothing on the most favorable terms;
- Our prices are among the lowest;
- Fast order processing;
- Prompt delivery throughout Russia;
- We work without mandatory advance payment;
- High level of service, individual approach;
- Guarantee of impeccable product quality.
Articles on the topic
Source: https://homemagnit.com/shop/biper/
How does a magnetic puller work?
The sensor is attached to the product in order to protect it from theft from the sales floor. They may vary in shape and size. The protective clip is a beeping sensor covered with a plastic casing on the outside and filled with a mechanical system. They may have different contents. Typically this is a steel rod fixed between two metal balls on springs.
The work of a magnetic tag remover is to create a strong, directed impulse that separates the steel balls and removes the main rod. This causes the clip to open and release the product. Removing a tag using such a device is quick and does not cause mechanical damage to the product.
Types of magnetic pullers
The structure of these mechanisms is not particularly different. They come in different shapes and emit impulses of varying power. The number of sensors that a removable device can remove depends on the strength of the magnetic energy it produces.
Standard removal devices are characterized by low power ratings. They are used to remove common squeaky tags - for example, from clothing. This section will help you choose a place where you can buy a magnetic clothes puller.
Modern new type tags require more advanced types of deactivators.
These include a reinforced magnetic puller. It is usually made of aluminum and is versatile as it can be used to open different types of tag locks. Such a device has sufficient power to perform such tasks.
Typically, its mechanism consists of several magnets connected in a special way, which allows them to create a powerful force field of directed action. The reinforced deactivator is attached to the surface of the cash desk using screws.
The universal magnetic puller allows you to remove sensors such as standard beepers, those with a reinforced lock, and most hard ones. You can buy a universal magnetic puller by studying the assortment in this section.
Application of magnetic pullers
The main area of application of such devices is trade. They are used by sellers to disable sensors that protect items from being stolen from a store. The anti-theft magnetic clip remover can also be used in everyday life.
As the owner of such a device, you can design any system based on a magnetic lock. Many car owners whose cars have lost headlights as a result of theft find it necessary to buy a magnetic tag remover and attach it to the lighting devices.
The system is placed under the hood of the car, and thus the headlights are reliably protected from thieves.
If you have a desire to buy a magnetic puller in Lipetsk for use in your home or business, you can refer to this section and carefully familiarize yourself with the various types of devices.
Source: https://magnitsouz-lipetsk.com/shop/magnitnye-semniki/
Magnetic puller and how it works
Magnetic remover is a device used to remove magnetic tags from products such as clothing, alcohol. Electromagnetic equipment is used in trade to prevent theft, which happens quite often. All products are marked with magnetic tags, which, when attempting to remove the goods, are responded to by sensors located at the exit of the store, as a result of which an alarm is triggered.
Some buyers try to remove the tag from clothing on their own, which is unlikely because the tags are very firmly attached to the item, and only a magnetic clothing remover, usually made of aluminum, can remove them.
Operating principle of anti-theft sensor removers
It is necessary to attach the magnetic tag to the center of the magnetic remover, having previously disconnected the clips. A click sound means the clip has been removed.
Types of anti-theft pullers
Magnetic pullers vary in power:
- 6500 Gauss.
- 10000 Gauss.
- 12000 Gauss and above.
The most commonly used pullers are 10,000 Gauss pullers because their output remains constant and they do not require power.
According to the specifics of their work, anti-theft pullers are divided into:
- Mechanical: used to remove hard sensors and have a sound alert that is triggered if an attempt is made to remove goods from the store. These pullers are attached to the table surface.
- Universal: suitable for most anti-theft tags, unlike mechanical ones, do not have a sound alert, are attached to the table with two bolts or double-sided tape, are capable of unlocking sensors of various levels of complexity due to powerful magnetic properties, so experts, as a rule, advise buying just such anti-theft pullers .
The entrepreneur ensures the safety of his goods by purchasing a universal magnetic puller. Their advantages: reliability, compactness, operation without power supply, small investments, safety, no restrictions on service life, workers do not need to undergo special training.
Types of magnetic tags:
- On small-sized products, flexible labels are used as tags, which are glued to the product itself. It is very difficult to remove such a tag completely, but the alarm will still go off if the tag is torn.
- Radiofrequency plates. This type of tag is not reliable; such a plate can be removed at home.
- Sensors with springs containing neon paint are a reliable means of protection. When you try to break in, the sensor begins to act even stronger, besides, the neon paint will give away the burglar in any case.
- Electromagnetic sensors are the most reliable, have a wide coverage area, and therefore are the most popular.
You can purchase magnetic pullers in Vladimir in our online store. This is very easy to do; you need to select the anti-theft removers you like and order them.
Buying anti-theft removers will not be very expensive and will protect any store from theft.
Source: https://magnitsouz-vladimir.com/shop/magnitnye-semniki/
Magnetic puller - what is it?
If you are the owner of a retail outlet and want to protect yourself and your business, then the magnetic pullers that we sell in Voronezh will help solve your problems. The manufacturer sells such a product as an anti-theft stripper. A security system based on magnetic pullers will prevent the loss of unpaid goods.
The main purpose of a magnetic remover is to protect products from possible theft.
How to use a magnetic clothes remover?
To remove the protection, a magnetic clothes remover is installed at the checkout. The magnet is based on organic substances of boron, iron and neodymium. Such a remover instantly removes the protection from the anti-theft sensors on the product, after which the buyer, having paid for the purchase, takes it away.
Scope of application - shops, self-service supermarkets, in which the item can be easily removed and can be tried on, taken to the cash department, without having to perform these duties of sellers.
How is the protection procedure canceled at retail outlets?
- The item (product) is taken to the cash register and handed over to the store employees.
- The cashier runs the beeper over the puller.
- The built-in anti-theft lock in the beeper is activated, after which it is unlocked and removed.
The method is quite simple and uncomplicated. The protective system is highly effective. It protects all types of goods on which clips are placed.
How do you remove a magnet from things?
It often happens that the seller neglects to remove the beeper, and the anti-theft gate does not work. As a result, the buyer who purchased the product is thinking about how to eliminate the anti-theft sensor.
It’s quite simple - buy a universal puller to remove the clips from the product and get rid of the beeper. If it happens that the purchased item has protective elements, buying a magnet is the solution to these problems.
You won't waste time going back to the supermarket to unprotect your items.
Unlocking the clips with a magnet is an easy procedure that even a child can handle. It is enough to put the puller down and bring an item of clothing to it, hearing a click - a sign that the beeper has been removed.
Buying a universal magnetic puller
You can buy an anti-theft protection remover in the city of Voronezh. Here we sell magnets for every taste, capable of coping with even the most powerful clip protection. High clutch power easily opens locks on the first attempt, and not on the third or fifth, as happens with low-power pullers.
The consumer has a choice of different types of pullers, differing from each other in the force of attraction, the outline of the surface used and the price.
The product is protected from environmental damage, works for 10 years, is not damaged and does not rust. This is an excellent product for an entrepreneur or individual.
A magnetic alarm remover is a great product to keep your belongings safe. By purchasing it, you will reduce theft at your point of sale to zero.
Source: https://magnitsouz-voronezh.com/shop/magnitnye-semniki/
Magnetic neodymium tag removers
Our company sells two types of magnetic pullers:
- Reinforced pullers used to protect goods in high-end stores.
- Universal pullers used in most supermarkets. The main advantage of such devices is the ability to deactivate a large number of tags.
The most popular pullers are universal ones, since they do not need to be connected to an energy source. Our store sells magnetic tag removers for any situation. The catalog located on the website of our store will help you make your choice.
Buying a magnetic puller in St. Petersburg is quite simple if you use the services of our company. We have a wide variety of removers designed to deactivate a variety of products. Our products are of high quality thanks to the manufacturer, which supplies us with magnets with positive characteristics.
Now you can purchase a magnetic puller in St. Petersburg at a very affordable price. Our company works directly with the manufacturer without intermediaries. This means that you can have no doubt about the quality of the product.
The operating principle of pullers is simple. If the product is not deactivated, an alarm is triggered, thanks to which the attacker has no chance of illegally removing the product. Typically, the protection is in a place that the buyer has no idea about.
Sometimes there are situations in which the protection does not work. If this happens, the buyer may have serious troubles in the future, since the alarm may go off in the most unexpected place.
That's why it's so important to buy a high-quality magnetic clothes remover. If you are interested in the quality of magnetic pullers, use the services of our online store, which sells products at a very reasonable price.
How to order a magnetic puller?
- Before placing an order, you should familiarize yourself with the product located on the website.
- You add the product you like to the cart, not forgetting to determine the number of pullers.
- Now you can proceed to placing the order itself.
If you do everything correctly, then after a while a company representative will contact you and ask you questions related to the delivery method and payment for the magnetic pullers.
You can ask the company representatives any questions you are interested in regarding the technical characteristics of magnets and their purpose. You can contact us directly on the website or by phone. The “contacts” website contains a telephone number through which you can call us during business hours.
If you are a resident of St. Petersburg, the parcel will arrive to you immediately after completing your application. Nonresident citizens receive it a little later. This is due to the shipment of goods, which is carried out by the post office.
Source: https://magnitsouz-spb.com/shop/magnitnye-semniki/
Purpose of neodymium magnet pullers
Security devices in the form of magnetic tags and various devices are designed to protect stores from thieves. Therefore, trade enterprises and networks do not skimp on installing protective devices. Special sensors are installed at the entrances and exits to stores that not only prevent stolen items from being taken out, but also prevent potential thieves from carrying powerful magnets into the store, which they use to try to remove magnetic tags. But the sensors quickly catch them and send a signal.
In order to remove the magnetic tag from a purchased item, each cash register is equipped with a special device. It's called a magnetic clothes remover. This small device contains a powerful neodymium magnet.
It is usually impossible to remove a magnetic tag from clothing without damaging it - its two parts are attracted to each other with enormous force. But with the help of a special puller this happens in a second.
A click is heard, the tag splits into two parts, and the item of clothing is released without problems.
In our online store you can buy modern high-quality magnetic pullers in Nizhny Novgorod at the most affordable price.
Where to buy anti-theft magnetic pullers
If a store needs an anti-theft sensor remover, we can recommend contacting our company. We have many similar products on our website, so each client will find exactly the anti-theft puller that is needed for his purposes.
We recommend buying a universal puller; it is powerful and works great with magnetic tags of different brands. You can purchase such products at retail, but more often they are ordered from us in bulk. This is very profitable, because the larger the batch, the less a separate puller will cost.
Selecting and purchasing the necessary products in Nizhny Novgorod is as easy as shelling pears with us. You just need to indicate which puller and in what quantity you need, and soon the finished batch will go to your address.
Source: https://magnitsouz-n-novgorod.com/shop/magnitnye-semniki/
Removable magnets and their types
Before ordering magnetic pullers, it is advisable to familiarize yourself with our products in more detail. Our store has:
- neodymium magnetic clothes pullers;
- high-quality universal magnetic puller;
- magnet for removing clips from clothes;
- a current magnet for removing beepers;
- magnetic sensor remover from bottles and other glassware;
- reinforced removable magnets.
Each magnetic tag remover has its own shape and purpose. For example, a reinforced puller is used in luxury stores, while a universal puller can be used in any store. The big advantage of a universal deactivator is that it does not require a constant power source. A magnet for removing protection from clothing must certainly be made of neodymium.
It is the neodymium alloy that can cope with a tag that is hidden in a hard-to-reach place, for example, inside the seam of a product. There is a magnetic remover designed specifically for removing tags from bottles. This model has a shell-shaped deactivator.
Wholesale trade and its advantages
Our store sells high-quality magnetic pullers wholesale. This means that each of you can purchase a neodymium magnet for clothing, food, and glass containers at a very affordable price.
Now, to buy magnets for clothes and other goods, you can fill out an application in our store and receive the goods in any way convenient for you.
Price of magnetic pullers
Every buyer is interested in purchasing a magnetic puller as cheaply as possible. Moreover, our customers are interested in buying high-quality pullers at an affordable price.
You can have no doubt about the quality of our pullers. We sell goods directly from the manufacturer, without intermediaries. This means that managers themselves set prices for goods.
Since we sell wholesale, the cost of the goods will be even lower. As a result, you can buy neodymium magnetic pullers from us at a price that is much lower than similar products purchased at retail.
Our offer for purchasing removable magnets
Our store has well-developed customer feedback. There are numerous customer reviews about the product on the forum. The actual address of the company, email address, contact phone number can be found in the “contacts” section and on the price list.
If you have any questions, please contact our operators directly. They will dispel all doubts related to the technical characteristics, payment option and delivery method of the magnetic puller. You can call them at any time convenient for you.
This device is installed near the cashiers. A magnet for removing beepers is installed at the entrance to the store. This device can also be placed in a store fitting room. The sensor is attached to the surface using a screw. The company's delivery service will help you install the puller if necessary.
Write, call, order pullers online. We are ready to cooperate with each of you, therefore, we will consider any of your suggestions regarding the purchase of powerful magnetic pullers.
Source: https://magnitopt-mos.com/shop/magnitnye-semniki/
Classification of magnetic pullers and their description
Magnetic pullers are classified according to the strength of the magnetic field created. They are reinforced and universal. The operating time of a particular puller depends on the strength of the magnetic field. The greater the force, the more tags the magnet will be able to unlock. In supermarkets, there are many different types of sensors on products. To unlock them, a universal magnetic puller is more suitable. When a large coverage area is needed, a reinforced magnetic puller is more suitable.
Universal sensors are more widely used. They do not require power and will remove any type of tag. You can easily buy a universal puller on our website in Krasnodar.
Purpose of anti-theft labels
Labels are a kind of anti-theft protection against theft or unintentional removal of goods. If goods are removed without the lock being removed, the siren is triggered, and then the offender falls into the hands of the security company's employees. The lock is removed by the cashier after payment for the goods.
The quality of our anti-theft removers has been repeatedly confirmed by the high ratings of our satisfied customers. No self-respecting entrepreneur will save on the purchase of product protection devices.
Neodymium magnetic pullers are always of very high quality and reliable. Their long-term performance is explained by the almost undiminished magnetic force of the magnets used in them. Universal magnetic pullers do not need to be connected to a power supply, which is why they are more in demand than other similar products.
Where can I find an anti-theft neodymium puller?
Neodymium magnetic pullers in Krasnodar can be purchased on our website. If you need to order several products of the same name, then in this case you can select the required quantity.
You can also order the required product by phone. In this case, you need to open the “Contacts” section and select the phone number of our customer service managers. Our professional managers will select the product according to your parameters that are most suitable for your store.
Our online store works with both individuals and legal entities, both in the city of Krasnodar and in the Krasnodar region. Our employees can deliver the goods to you in the store, and if necessary, our specialists can install the equipment for you and explain how it works.
Source: https://magnitsouz-krasnodar.com/shop/magnitnye-semniki/
Design of magnetic clothes remover
The main element of the magnetic puller is a powerful multi-polar magnet placed in a metal shell made of non-magnetic metal. The puller can be cylindrical or cone shaped. The housing of the magnetic puller makes it possible to direct the magnet force in the required direction. Using a powerful field generated by the device, the tag is removed from the product.
The installation procedure for an anti-theft remover consists of securing it in a place of permanent use. This could be the work desk of a cashier or an employee of the company. A non-magnetic chain or a special bolt is used to secure the puller to the work surface. Devices for fixing the puller are not included in the product delivery set. They need to be purchased separately.
The magnetic puller is capable of operating autonomously. It does not require an electrical connection. Please note that the constant field created by a neodymium magnet is not intended for use with complex locks. The puller cannot affect sensors of radio frequency and acoustomagnetic systems.
Magnetic pullers are simple devices. They do not require special maintenance. In addition, anyone can work with such a device. The use of a magnetic puller does not require complex technological operations. There are several types of sensors:
- Mini sensors;
- Simple sensors with magnetic lock;
- Pencil sensor;
- Shell-shaped sensor.
Types of magnetic pullers
On our website you can find universal and reinforced pullers. The product description must indicate the power output of the product. Products with a larger index have greater power. Using a powerful magnetic remover, you can deactivate a large number of magnetic tags.
Anti-theft tag remover functions
To reduce the burden on store staff, you can use a special electronic system for accounting and tracking goods. All products presented on store windows are required to be sealed. In this case, a detector is placed at the exit of the store, which emits a sound signal when goods that have not been demagnetized are removed. To remove anti-theft tags, a magnetic stripper is used that creates a directed magnetic field.
Where to buy a universal anti-theft sensor remover?
On our website you can purchase any magnetic pullers in Kirov. Simply click “Buy” in the product section of the catalog. After this, the site will redirect you to the checkout page. When selected, the order automatically goes to the Cart section. After this, you can edit your order.
Source: https://magnitsouz-kirov.com/shop/magnitnye-semniki/